Page 1
Monitor USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor.
Page 3
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No. : PLF1015, PLF1515, PLF2215, PLF2415 We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of diff...
CORRECT USE OF THE AC ADAPTER Use only the AC Adapter provided by iiyama. Any deviation from this by using another type of adapter may result in damage to the accessory and the monitor by fi re or electric shock.
Page 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
If you drop any materials or liquids such as water into the monitor when cleaning, WARNING unplug the power cable immediately and contact your dealer or iiyama service center. To protect the Touch screen surface, do not scratch or rub the screen with a hard NOTE object.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1280 × 800 : ProLite TF1015MC Supports Resolutions up to 1024 × 768 : ProLite TF1515MC Supports Resolutions up to 1920 × 1080 : ProLite TF2215MC / ProLite TF2415MC ...
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama offi ce.
INSTALLATION WARNING Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and the mount. < WALL MOUNTING > WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L”...
CONTROLS AND CONNECTORS External control <Front> <Back> Menu Button (MENU) Scroll Up / Brightness Button ( Scroll Down / Contrast Button ( Select Button (SELECT) Power Switch ( External control pad Connector (RJ45) USB Connector (USB) VGA Connector (VGA) HDMI Connector (HDMI) DisplayPort Connector (DP) Connector for AC Adapter( : Direct current) (DC)
As shown in fi gure below, tighten Bracket A to B using the screws supplied. (ProLite TF1015MC: 2pairs of 2 pcs, ProLite TF1515MC / ProLite TF2215MC: 4pairs of 2 pcs, ProLite TF2415MC: 6pairs of 2 pcs) Screw x 2...
Page 13
"B" = M4 holes without screw thread Attach the monitor from the front side of the recess and fi x with the screws. (Screws: ProLite TF1015MC: 4 pcs, ProLite TF1515MC / ProLite TF2215MC: 8 pcs, ProLite TF2415MC: 12 pcs) ProLite TF1015MC ProLite TF1515MC Screw x 2 x 4...
Page 14
You will need a screwdriver to mount the L-Bracket. NOTE L-Brackets and screws are necessary to install an open frame monitor. For details regarding the operating temperature and humidity conditions, see specifi cation of this User Manual. The position of the L-bracket can be either 20.0mm 0 mm or 20.0 mm from the front of the monitor depending on which screw holes...
An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama offi ce.
Page 16
[Fitting and Removal of Cable Cover] Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor fl at on a table with front face down. < Removal > Remove the screw of the cable cover and remove the cable cover from the monitor.
Change to the desired signal timing listed on page 33: COMPLIANT TIMING. Windows XP/Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 33. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS.
Page 19
Direct LOCK MODE: Simultaneously press the MENU button and the button when an image is displayed through VGA, HDMI or DisplayPort. * The OSD menu is not displayed when the OSD is locked. Press the MENU button and the button simultaneously again.
ADJUSTMENT MENU CONTENTS Picture Option Picture Advanced Contrast Brightness H-Position V-Position Phase Clock Auto Adjust Adjustment Item Problem / Option Button to Press Too dull Contrast Direct Too intense Too dark Brightness* Direct Too bright Too left H-Position* Too right Too low V-Position* Too high...
Page 21
Button to change the picture quality in reverse numerical order. Sharpness Adjust the picture quality at resolutions of less 1280 x 800(ProLite TF1015MC) / 1024 x 768(ProLite TF1515MC) / 1920 x 1080(ProLite TF2215MC / ProLite TF2415MC). You can change the picture quality.
Page 22
Picture Advanced Option OSD Timeout OSD Position User OSD H-Position OSD V-Position Touch Switch Normal Adjustment Item Problem / Option Button to Press You can set the OSD display duration time OSD Timeout between 5 and 60 seconds. You can set the OSD position. OSD Position User (Upper left / Lower left / Upper right / Lower right / Center)
Page 23
Option Picture Advanced Option Reset Language English Source Select DisplayMode Factory Adjustment Item Problem / Option Button to Press Return to Menu. Reset Factory-preset data is restored. English English Español Spanish Japanese Français French Language Traditional Chinese Deutsch German 繁中 Italiano Italian Simplifi...
fl icker or blur for the particular computer in use. ProLite TF1015MC is designed to provide the best performance at resolution of 1280 × 800, but can not provide the best at resolutions of less than 1280 × 800 because the picture is automatically stretched to fi...
Page 25
Perform the auto adjustment. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a fl icker or blur, or the picture does not fi t in the display area after performing the Auto Adjust. Adjust the V-Position so that the top and bottom of the picture frame will fi t to the display area.
Page 26
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern. In case the strong fl icker or blurs remain on a part of the screen, repeat steps NOTE because the Clock may not be adjusted correctly. If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.
POWER MANAGEMENT FEATURE When your computer is not in use, the power management feature will automatically reduce the power consumption of your monitor. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is confi...
MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem...
RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com for monitor recycling. RECYCLING INFORMATION 25...
DIMENSIONS : L-BRACKET ProLite TF1015MC <Bracket A> <Bracket B> 1.6 mm 1.0 mm Screw holes for 4.2 mm fixing the bracket 60.0 mm 1.0 mm Screw holes for fixing the bracket 90.0 mm 90.0 mm 135.0 mm 135.0 mm Screw holes for 120.0 mm...