Table of Contents
Advertisement
CONNECT THE DISPLAY TO AN EXTERNAL PC
NOTE: All available alternatives are shown below; make your connection based on your installation parameters.
1)
Make one of the following two connections:
a)
Connect a VGA cable from the "VGA" port on the under panel of the touch display to the VGA port on the external PC. (This
connection is
color-coded blue
b) Connect an HDMI cable from the "HDMI" port on the front panel of the touch display to the HDMI port on the external PC.
(This connection is
NOTE: The audio connection (step 3, below) is unnecessary with an HDMI-to-HDMI connection.
2) Connect the provided A-to-B USB cable to the USB type B port labeled "TOUCH USB" on the front panel of the touch display and to
the USB type A port on the external PC.
NOTE: This connection allows you to use touch control on the external PC to control the touch display.
3) Connect an audio cable from the "PC-AUDIO" port on the under panel of the touch display to the "Audio-Out" port on the external
computer.
4) Depending on your choice in step 1 (above), set the VGA or the HDMI as your source (see "Accessing Total Touch Control" on page
22 and "The Source submenu" on page 23).
HDMI1
HDMI2
in the illustration below.) Or...
color-coded red
in the illustration below.)
FRONT PANEL PORTS
PCUSB
HDMI3
HDMI-OUT
UNDER PANEL PORTS
HDMI
VGA
EXTERNAL PC PORTS
Page 20 Mondopad (Ultra, Launch, Core/PC, Core) and JTouch Hardware Guide
MEDIA USB
TOUCH USB
LAN
HDMI4(MHL)
USB
HDMI
VGA
AUDIO-OUT
PC-AUDIO
Hide quick links:
Advertisement
Table of Contents
