Summary of Contents for Vision TECHCONNECT TC2-MATRIXBRIDGE
- Page 1 TECHCONNECT TC2-MATRIXBRIDGE OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc2-matrix TC2-MATRIXBRIDGE_manual_en...
-
Page 2: Declaration Of Conformity
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by „Vision‟ who is wholly owned by „Azlan Logistics Ltd.‟, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. -
Page 3: Place Of Installation
WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. - Page 4 OVERVIEW This product is a protocol exchange device which allows 3 party software to control the Techconnect Matrix devices. Only one of these devices is required per system. Provides built-in web server and Telnet API (used in a third-party controller) Detects TX/RX automatically Supports matrix switching Supports Video Wall...
-
Page 5: Front Panel
FRONT PANEL Power LED - steady red when the device is powered on WORK LED - steady blue when the device is working properly. If red the device is rebooting. RESET button - When the device is powered on, press and hold this button for 5 seconds to restores to factory default settings. -
Page 6: Hardware Installation
HARDWARE INSTALLATION Connect all transmitters, receivers, and the bridge to the network. Connect Source to TX Connect Displays to RX Power on all the devices Use Telnet or Web browser to manage bridge. HDMI Ethernet IP Control Box Switch Apple TV Xbox TC2-MATRIXBRIDGE_manual_en... - Page 7 SETUP Users can access the device through Web, Telnet or a Third-party controller. To access the device through Web Management Page, follow these steps. Enter 192.168.11.243 into a browser. Enter a password (“admin” by default), click Login to access the device. Notes: ...
- Page 8 Telnet To access the device through Telnet, follow these steps. Click Start menu, go to Run. Input cmd, click OK. Input telnet 192.168.11.243, press Enter. This window will come up: Notes: The IP address of the computer and IP Control Box should be in the same network subnet. For example, if the IP address of IP Control Box is 192.168.11.243, then the computer should be 192.168.11.X.
-
Page 9: Web Configuration
WEB CONFIGURATION The Web Management Page is designed to perform the functions to control the device in a user- friendly interface. Home Screen Open your browser, enter 192.168.11.243 in the address bar, and input the password (admin by default), click Login. This window will open: It includes three parts: Matrix, TX/RX Settings and System Settings. - Page 10 Matrix Click Load Matrix button, a table comes up. The first row shows TX, the first column shows RX. Icon Description device is online. device is offline. Shows TX and RX are linked. Click the green bar; it changes into blank, which means TX and RX are disconnected.
- Page 11 TX/RX Settings Select a device you want to configure. GUI Element Description Auto IP Obtain the IP address automatically. DHCP The IP address is assigned by a DHCP server. Static The IP address is manually configured. IP Address The IP address of the TX/RX. Subnet Mask The subnet mask of the TX/RX.
- Page 12 GUI Element Description Alias Give the TX/RX a different name which would be easier to remember. Note: Alias cannot contain ',' ';' '_' '@', '*', '&', 'EX131', 'EX363', 'EX373', 'EX383', 'EX393', 'TX', 'EX141', 'EX403', 'RX'. GUI Element Description Factory Default Restore the TX/RX to factory default settings.
- Page 13 System Settings In this page, you can configure the IP Control Box. GUI Element Description IP Address The IP address for TX and RX communication. Subnet Mask The subnet mask for TX and RX communication. Default Gateway The default gateway for TX and RX communication. TC2-MATRIXBRIDGE_manual_en...
- Page 14 GUI Element Description IP Address The IP address for Telnet client and web. Subnet Mask The subnet mask for Telnet client and web. Default Gateway The default gateway for Telnet client and web. GUI Element Description Web Password Login password for Web Management page. The default password is admin.
- Page 15 1. Why I cannot login the Web Management Page? Check the IP address of your computer. The default IP address of the IP Control Box is 192.168.11.243, so the IP address of the computer should be 192.168.11. X. Check the Web browser. It will work with Firefox, Opera, Safari Internet Explorer 11 or Chrome.
- Page 16 config set device alias EX131-CCCCCCCCCCCCC tx3 config set device alias EX131-DDDDDDDDDDD tx4 config set device alias EX141-EEEEEEEEEEEEEEE rx1 config set device alias EX141-FFFFFFFFFFFFFFFFF rx2 config set device alias EX141-GGGGGGGGGGGG rx3 config set device alias EX141-HHHHHHHHHHH rx4 The first solution: 1)”vw add vw1 tx1”.
-
Page 17: Specifications
SPECIFICATIONS PRODUCT DIMENSIONS: 141 x 115 x 26 mm (length x width x height) PRODUCT WEIGHT: 420g CONSTRUCTION MATERIAL: Metal COLOUR: Black TECHNICAL DETAILS: Control Method: Web, Telnet, Third-party control system ESD Protection: ±8kV (air-gap discharge) ±4kV (contact discharge) Surge Protection: ±1000 V (Tested ten times respectively for the positive and negative voltages) Operating Temperature Range: -0 to +35°C Operating Humidity Range: 10 to 90 % RH (no condensation) -
Page 18: Warranty
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale.