Related Manuals for peerless-AV CL-42PLC68-OB
Summary of Contents for peerless-AV CL-42PLC68-OB
-
Page 1: User Manual
User Manual OUTDOOR HD DISPLAY MODEL: CL-42PLC68-OB, CL-47PLC68-OB, CL-55PLC68-OB, CLP-42PLC68-OB, CLP-47PLC68-OB, CLP-55PLC68-OB www.peerless-av.com 2014-06-13 #:220-9002-6 (2016-02-05) -
Page 2: Table Of Contents
CONTENTS General Safety Precautions ........................3 FCC Caution ...........................5 FCC Statement ..........................5 Notice .............................5 Relevant Information ........................5 System Installation And Electrical Requirements ..................6 Electrical Code ..........................6 Power Source ..........................6 Set Up Instructions ..........................7 What's In The Box ..........................7 Ambient Light Sensor ........................7 Connecting Cables .........................8 Source Connection Guide ......................8 Cable Seals ..........................9... -
Page 3: General Safety Precautions
RISK OF ELECTRICAL SHOCK To reduce the risk of electric shock, do not disassemble the unit under any circumstances. No user serviceable parts inside. All product services should be done by the Peerless-AV certifi ed service personnel. Read before operating equipment Thank you for purchasing our product. - Page 4 1. Do NOT, under any circumstances, modify or disassemble this product as it may cause fi re, electric shock, or severe damages to the product. Also any unauthorized modifi cations made to the product automatically void product warranty. 2. Never touch antenna lines or wires, electrical cables or plugs when lightning or thunder is present as it may cause electric shock.
-
Page 5: Fcc Caution
CAUTION: Please use the electrical cord provided with this display. If an electrical cord is not supplied with this equipment, please contact your supplier. Only plug equipment into receptacles with GFCI protection. IMPORTANT: Peerless-AV is not responsible for any issues created by water present at the plug/receptacle insertion point. Relevant Information Record your display's model and serial number here for future reference. -
Page 6: System Installation And Electrical Requirements
SYSTEM INSTALLATION AND ELECTRICAL REQUIREMENTS Electrical Code Note: To the display system installer: This reminder is provided to call attention to Article 820-44 of the National Electric Code that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the facility. Outlet shall be installed near the equipment and shall be easily accessible. -
Page 7: Set Up Instructions
SET UP INSTRUCTIONS Important: 1. The display is equipped with protective glass; however, it is best practice to never apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. 2. -
Page 8: Connecting Cables
Connecting Cables Source Connection Guide Connect cables from the source devices to their appropriate connector on the display. Note: Your display's serial number can be found on the box and underneath the rear cover plate. For display with serial For display with serial number that starts with 12 or 14 number that starts with 15 Coaxial SPDIF... -
Page 9: Cable Seals
Cable Seals Installation Of The Rear Cover Plate 1. Plug cables into proper input connection. 1. Place cover plate directly over cables aligning holes with screw inserts. 2. Run cable across foam gasket block. 2. Apply pressure to center of cover plate. Notes: a. -
Page 10: Connect To The Power Source
Connect To The Power Source 1. Connect the supplied electrical cord to the 3. Install the electrical cord stress relief display ensuring the slot in the cord plug retaining bracket. Failure to install the aligns with the tab on the display plug. retaining bracket may lead to damage resulting in injury or death. -
Page 11: Prepare Your Display For Mounting
2. For portrait mounting rotate the display so that the rear cover plate and cord connections will be on the right when viewing the display from the front. Wall mounting solution is not included with the unit and is sold separately. Peerless-AV provides a variety of all-weather mounting solutions. Contact your Peerless-AV representative for all-environment mounting solutions. -
Page 12: Prepare The Display For Usage
CAUTION Incorrect usage of batteries can result in leaks or bursting. Peerless-AV recommends the following battery use: 1. Do not mix battery brands. 2. Do not combine new and old batteries. This can shorten the battery life or cause liquid leakage of the batteries. -
Page 13: Operating Instructions
OPERATING INSTRUCTIONS Using The Remote Control Power On/Off Volume Up Display Channel, Mute Audio, Video and Source Select Signal Information Quick Source Channel Up Selection Buttons Number Pad Volume Down Select Menu Exit Channel Down Fastforward Rewind Menu Menu Controls (Up/Down/Left/Right) Play Guide... -
Page 14: Navigating The On-Screen Menu
Navigating The On Screen Menu Pressing the menu key on the remote or the onboard controls will cause the On Screen Display (OSD) main page to be displayed with fi ve menu tabs: Picture, Audio, Time, Setup, Lock and Channel. Use the cursor keys to move through the various sub menus. Pressing the menu key again will move the selection back one level. -
Page 15: Time
Navigating The On Screen Menu Pressing the menu key on the remote or the onboard controls will cause the On Screen Display (OSD) main page to be displayed with fi ve menu tabs: Picture, Audio, Time, Setup, Lock and Channel. Use the cursor keys to move through the various sub menus. Pressing the menu key again will move the selection back one level. -
Page 16: (Rs-232C) Serial Control Of The Display
(RS-232C) Serial Control Of The Display Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. Note: This operation system should be used by a person who is accustomed to using computers. Xtreme Displays RS 232 Codes A0, F0, 55, FF, 14, EB A0, F0, 55, FF, 4E, B1 Mute:... -
Page 17: Tips
• Make sure there is a direct path between the remote control and the IR Doesn’t Work receiver located at the Peerless-AV logo at the bottom center of the display. • Press the “TV” button on the universal remote control to select the TV as the device being controlled. -
Page 18: Product Specifi Cations
50 to 60 Hz Noise Reduction Yes Power 3-D Comb Filter Consumption and De-interlace CL-42PLC68-OB Display: 101 W Mute Yes Total with Heater: 801 W OSD Language English, French, Spanish CL-47PLC68-OB Display: 135 W Total with Heater: 835 W Environmental... - Page 19 Input/Output Connections Display Size: (W x H xD) TV Input Coax (x1), 75 ohm, NTSC, ATSC, 64 QAM, 256QAM CL-42PLC68-OB 39.2" x 23.2" x 5.6" CL-47PLC68-OB 43.6" x 25.7" x 5.6" VGA Input 15 pin D-SUB (x1), Up to CL-55PLC68-OB 50.4"...
- Page 20 This page was intentionally left blank. 2014-06-13 #:220-9002-6 (2016-02-05)
- Page 21 This page was intentionally left blank. 2014-06-13 #:220-9002-6 (2016-02-05)
- Page 22 This page was intentionally left blank. 2014-06-13 #:220-9002-6 (2016-02-05)
-
Page 23: Warranty
During the applicable Limited Warranty period for Dirty air waves, and/or unusual signal interference due to weak signal from labor, Peerless-AV will provide the labor for warranty repair at no charge for a period of two (2) years from the date of original purchase. - Page 24 Patented. Utility Patent No. 8,313,073 B2; 8,282,059 B2. Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com © 2016, Peerless Industries, Inc.