330-SS-3-FFF-L-010 Flo-Tite 3/8" Stainless Steel 3 Piece Ball Valves, Multi-Choice 300

The Flo-Tite 200 / 300 Series is designed as a split body, three-piece construction, to allow ease of access for maintenance of the valve ball and seat without special tools. This line of valves utilizes the "free-floating" ball principle. The ball is not fixed but is free to move with the line pressure. As a result, these valves are capable of tight shut off with the flow in either direction or dead-ended, regardless of the position of the valve in the line. The downstream seat, which is opposite the pressurized side of a closed valve, must carry the load exerted by the line pressure on the ball, while the upstream seat is subject to little load or wear. For this reason, it is sometimes possible to increase useful seat life by turning the valve end to end in the pipeline.

Special Features:

• Iso mount type automation pad
• Weld-in-place design
• Secondary media containment
• Live-loaded stem assemblies
• Swing-out body design
• Safety locking handle
• Anti-static grounding device
• Super-tek seats, standard
• Secondary metal seat option
• Cavity filler - all sizes optional
• Metal name plates identify all soft parts
• 4" stem extension option

End Cap Selection:

• Threaded (NPT)
• Socket weld
• Butt weld
• ANSI 150/300 flanged connections
• Tri clamp-sanitary end
• Cam lock
• Tube end
• Flush bottom tank
• Extended end SW
• Extended end B/W

Unique Design

• Size range 1/4" thru 4" optional 6"-12"
• 1500 wog/150 WSP 1/4" - 2-1/2", 1250 WOG/150 WSP 3" - 4" ANSI 150/300 6"-12"
• Cap screws are used to insure precise alignment of valve center body to end caps. This high-end design feature eliminates through bolts, nuts, washers and their related problems.