Prolongs battery life by regulating the charge voltage according to battery temperature.

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Allows additional run time to be quickly added as needed.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatically starts up the connected equipment upon the return of utility power.

Quickly understand unit and power status with visual indicators.

Provides management of the UPS via a serial port.

Enables centralized management via the APC InfraStruXure Manager.

Customize UPS capabilities with management cards.

Provides remote power management of the UPS over the network.

Install maintenance releases of firmware remotely using FTP.

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Provides early-warning fault analysis ensuring proactive component replacement.

Warns when a battery is not available to provide backup power.

Provides notification of changing utility power and UPS power conditions

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Provides temporary battery power when the utility power is out.

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Minimizes installation costs by enabling the use of smaller generators and cabling.

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.