loading ...

Cisco CWDM-SFP-1530 CWDM 1530-nm SFP; Gigabit Ethernet and 1 and 2-Gb Fibre Channel

Brand: Cisco
Part Number: CWDM-SFP-1530
Condition: Factory New Sealed
Availability: In Stock
Ships: Typically within 2 Business Days
Warranty: 3 Years

$350.00

Wavelength:

1470nm 1490nm 1510nm 1530nm 1550nm 1570nm 1590nm 1610nm

Qty

The Cisco Coarse Wavelength-Division Multiplexing (CWDM) Small Form-Factor Pluggable (SFP) solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet and Fibre Channel services in their networks. The product set helps enable the flexible design of highly available, multiservice networks.

The Cisco CWDM SFP solution is a convenient and cost-effective solution for the adoption of Gigabit Ethernet and Fibre Channel in campus, data-center, and metropolitan-area access networks.

The Cisco CWDM SFP solution has two main components: a set of eight different pluggable transceivers (Cisco CWDM SFPs), and a set of different Cisco CWDM passive multiplexer/demultiplexer or optical add/drop multiplexers (OADMs). A Cisco CWDM chassis enables rack-mounting up to two of the Cisco CWDM passives. Both the transceivers and the passive multiplexers are compliant with the ITU-T G.694.2 standard defined CWDM grid.

Key features and benefits

Scalability

The Cisco CWDM SFP solution helps enable the transport of up to eight channels (Gigabit Ethernet or Fibre Channel) over single-mode fiber strands.

Easy Deployment and flexible implementation

The Cisco CWDM SFP fits into a standard SFP port supporting the IEEE 802.3z standard on the supported Cisco Systems® platforms. The Cisco CWDM OADM is passive and requires no power. Neither the Cisco CWDM SFP nor the Cisco CWDM passives requires configuration.

The Cisco CWDM SFP solution allows for a variety of network configurations—from multichannel point-to-point to hub and meshed-ring configurations.

High availability

The Cisco CWDM SFP solution takes advantage of a multichannel architecture and the inherent protection of ring architectures. The solution helps enable:

Use of Layer 2 and Layer 3 redundancy and failover mechanisms at the channel endpoints (Cisco CWDM SFP) to build highly available links
Use of two-path link configurations in a ring architecture to provide protection from fiber cuts

Investment protection

The Cisco CWDM SFP solution helps enable enterprises and service providers to increase the bandwidth of an existing Gigabit Ethernet optical infrastructure without adding new fiber strands. The solution can be used in parallel with other Cisco SFP devices on the same platform.

Mesh (ring) configuration

Mesh deployments are a combination of hub-and-spoke and point-to-point or even multiple point-to-point connections in parallel on the same optical link. Deployment of the maximum eight wavelengths allows for different combinations of these scenarios.

Cisco CWDM SFPs

A Cisco CWDM SFP is a hot-swappable input/output device that plugs into an SFP port or slot of a Cisco switch or router, linking the port with the fiber-optic network.

The Cisco CWDM SFPs are multirate parts that support both Gigabit Ethernet and Fibre Channel (1 gigabit and 2 gigabit).

Performance

Gigabit Ethernet 1.25 Gbps full-duplex links with an optical link budget of 29 dB
Fibre Channel 1.06 and 2.12 Gbps full-duplex links with an optical link budget of 28 dB

Connectors and cabling

Equipment: Standard SFP interface
Network: Dual LC/PC connector

Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported.

Environmental conditions and power requirements

Operating temperature range: 32 to 122°F (0 to 50°C)
Storage temperature range: –40 to 185°F (–40 to 85°C)

Electrical power interface data

Parameter	Symbol	Minimum	Typical	Maximum	Units
Supply Current	Is		220	300	mA
Surge Current	Isurge			+30	mA
Input Voltage	Vmax	3.1	3.3	3.5	V

Optical parameters

Parameter	Symbol	Minimum	Typical	Maximum	Units	Notes and Conditions
Transmitter Center Wavelength	wavelengthc	(x–4)		(x + 7)	nm	Available center wavelengths are 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610 nm
Side-Mode Suppression Ratio	SMSR	30			dB
Transmitter Optical Output Power	Pout	0		5.0	dBm	Average power coupled into single-mode fiber
Receiver Optical Input Power (BER <10–12 with PRBS 2–7—1)	Pin	-28.0		-7.0	dBm	@ 2.12 Gbps, 140°F (60°C) case temperature
Receiver Optical Input Power (BER <10–12 with PRBS 2–7—1)	Pin	-29.0		-7.0	dBm	@ 1.25 Gbps, 140°F (60°C) case temperature
Receiver Optical Input Wavelength	wavelengthin	1450		1620	nm
Transmitter Extinction Ratio	OMI	9			dB
Dispersion Penalty at 100 km				3	dB	@ 2.12 Gbps
Dispersion Penalty at 100 km				2	dB	@ 1.25 Gbps

Note: Parameters are specified over temperature and at end of life unless otherwise noted.
Note: When shorter distances of single-mode fiber are used, it may be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver.

Specifications

Product Number: CWDM-SFP-1530
Description: Cisco CWDM 1530-nm SFP; Gigabit Ethernet and 1 and 2 Gb Fibre Channel
Wavelength: 1530nm
Color: Green

Platform support

Catalyst 6500 Series Switches
Catalyst 2960 X Series
Cisco IE4000 Series
Cisco 2000 Connected Grid Router Series
Cisco 2500 Connected Grid Switch Series
Catalyst 2960 XR Series
Cisco IE5000 Series
Cisco IE2000 Series
Cisco IE2000U Series
Cisco IE3000 Series
Catalyst 6800 Series Switches
Cisco IE3010 Series

CWDM-SFP-1530

This CWDM-SFP-1530 is 100% genuine Cisco product. It won't have any compatibility problem with your Cisco devices. And the Cisco CWDM-SFP-1530 CWDM 1530-nm SFP; Gigabit Ethernet and 1 and 2-Gb Fibre Channel is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com

CWDM-SFP-1530 Datasheet