About the Focal PS 165 FXE
The sound of flax
The sound of flax
In their pursuit of sonic excellence, Focal discovered that a flax woofer cone produces a dynamic sound that's worthy of their reputation. At half the weight of fiberglass, these flax fibers help create a very rigid yet lightweight cone that ensures accuracy and limits unwanted vibrations.
Bi-amped system
Focal pre-wires the included external crossovers for an easier installation. Each crossover network also includes bi-amp connections, one for the woofer and one for the tweeter. When you power the woofers and tweeters separately, you'll gain even more clarity and impact from this component system.
Tuned mass damper
Focal knows that control is of the utmost importance to accurate sound. Their patented surround uses the "tuned mass damper" technology used to enhance the structural stabilization of earthquake-resistant skyscrapers — seriously!! With greater control of the woofer cone, you'll gain smoother, more natural sound.
Awesome power handling
This Flax Evo Series PS 165 FXE 6-1/2" component speaker system combine flax woofers with Focal's celebrated M-profile inverted dome tweeters. The inverted dome design of the tweeters mimics woofer-style sound dispersion, distributing the high frequencies in a wide pattern to create an exceptionally natural soundstage. The aluminum frame provides an incredibly rigid and non-resonant platform for these superior components. These speakers will handle up to 80 watts RMS, so powering them with an amplifier will really enhance their dynamic range.
Product highlights:
- 6-1/2" bi-amped component speaker system includes two woofers, two tweeters, and two crossovers
- flax woofer cone with "tuned mass damper" surround
- aluminum/magnesium inverted dome tweeter
- pre-wired crossover system with bi-amp connections
- 4-ohm impedance
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 55-28,000 Hz
- sensitivity: 90.5 dB at 2.83 volts
- woofer top-mount depth: 3-1/16"
- warranty: 1 year
- MFR # PS165FXE
What's in the box:
Focal PS 165 FXE owner's manual
- Two PS 165 FXE woofers
- Two TWFA1018 inverted dome tweeters (each has a 21" length of speaker wire attached)
- 2 Crossover networks
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Tweeter grilles (installed)
- 2 Tweeter trim rings (installed)
- 2 OEM tweeter mounting rings
- 2 Tweeter angle mount cups
- 2 Woofer mounting gaskets
- 8 Speed clips
- Four 3/4" Screws
- Eight 1" Screws
- Owner's manual (English/ French/ German/ Italian/ Spanish/ Portuguese/ Dutch/ Polish/ Russian/ Chinese/ Korean/ Japanese)
Customer reviews for Focal PS 165 FXE
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal PS 165 FXE
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | Inverted Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Aluminum/Magnesium | |
| Woofer Composition | Flax | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 90.5 | |
| Frequency Response | 55 - 28k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 80 | |
| Peak Power Handling (Watts) | 160 | |
| Top-mount Depth (Inches) | 3 1/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 5/8 | |
| Mounting Height (Inches) | 0.427 | |
| Frame Width | 6.506 | |
| Frame Length | 6.506 | |
Product Research
Features
Woofer Size Classification: Some manufacturers, including Focal, call this size woofer a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as a 6¾". Please enter your vehicle information to confirm fit.
Aluminum Basket: The woofers' cast aluminum baskets are rigid and non-magnetic.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Surround: Each woofer uses a butyl rubber surround, resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Tweeters: The tweeters have inverted Aluminum/Magnesium domes, producing a broad sound stage. They can be surface or flush mounted using the included adapters. The angled surface mount housings can be positioned at 25° or 45°.
Note: When flush mounted, the tweeters are pressure fit into the opening, with nothing holding them from behind, so the cutout diameter is very important.
Tweeter Dimensions:
| Flush Mount | Angled Surface Mount | |
|---|---|---|
| Mounting Height | 0.393" | 1.8" |
| Depth | 0.425" | (screw depth) |
| Frame Diameter | 2.046" | 2.07" x 2.15" |
| Cutout Diameter | 1.572" | N/A |
Crossovers: Each crossover has screw terminal inputs and outputs that will accommodate bare wire or spade connectors up to 0.315" wide. (Speaker wire is not included with the system.) The output level of the tweeters is adjustable; choose 0 dB or -3 dB. The output level of midrange frequencies is also adjustable; choose 0 dB or -3 dB. The crossovers also have bi-amp inputs, one input for the tweeter and one for the woofer. When bi-amping the speakers, the input jumpers need to be removed. Using four amplifier channels to bi-amp the speakers typically improves the dynamic range and presents an easier load for the amp(s) to drive. The crossovers use 12 dB per octave low-pass and 18 dB per octave high-pass filters. The crossover point for both is 3 kHz.
Crossover Dimensions:
- Width: 5⅜"
- Height: 1⅝"
- Depth: 4"
The Focal PS 165 FXE replaces these items
Focal Performance PS 165FX
- flax and glass fiber woofer with butyl rubber surround
- inverted dome tweeter
- power range: 6-80 watts RMS (160 watts peak)
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
These things sound amazing when paired with an aftermarket amp and DSP. Keep in mind that you may need to fabricate or modify existing brackets to make the speakers fit as they are quite deep.
Dylan from HONOLULU, HI