advertisement
MC-760 Series
IntelliSense’s MC-760 Series of Passive Infrared Motion Sensors utilize Targest Recognition technology – resulting in true small animal immunity and the most reliable detection.
FEATURES:
• Immunity to Small Animals
The MC-760 accurately distinguishes between small animals and human intruders. The microcontroller-based optics/firmware system uses Target Recognition to analyze the spatial distribution of heat through Uniform Sensitivity
Optics, focusing on the target pattern of a human.
• Digital Conversion of Incoming Signals Through
Microcontroller
All signals are converted from analog to digital so the microcontroller has a detailed picture of the infrared signal and can process it accordingly.
• Fast and Easy Installation
Designed with the installer in mind, the
MC-760 has a large wiring channel, a “snap together” cover, and Zone Finder mode for quick sensor positioning. The MC-760TVB has EOL terminals for easy hookup of EOL resistors.
• Attractive, Slim Design
The sleek, smooth-white housing blends in with any room decor.
• Excellent Performance in Hot and Cold
Environments
True Temperature Compensation means the
MC-760 has no loss of sensitivity as room temperature nears body temperature. Plus, a cold temperature rating of -10° C (14° F), makes it ideal for garages, vacation homes, storage areas, etc.
• Zero-Clearance Bug Guard
Fully enclosed and gasketed bug guard prevents bugs and dust from entering the optics chamber.
• Self Diagnostics
The sensor performs self-diagnostics at regular intervals to ensure proper performance. Tests can also be initiated remotely from the control panel or central station.IntelliSense’s Target Recognition results in true small animal immunity.
• Look-Down Mirrored-Optics Prevent
Intruder Creep
Patented 90° look-down zones detect intruders creeping directly below the sensor.
• Uniform Sensitivity Optics
This custom-designed Fresnel lens provides the same sensitivity at the edge of the pattern as exists directly in front of the sensor. This means excellent capture at the edges of the pattern without increasing the sensor’s overall gain.
• Small Animal Immunity
The MC-760 Series has small animal immunity up to 11 kg (25 lbs.) total combined animal weight.
• Automatic Zone Finder for Quick Walk-Test
A flashing LED indicates each zone edge and takes the guesswork out of positioning the sensor.
This feature is initiated for the first 10 minutes after power-up.
• RFI Immunity
The MC-760 has four times the industry requirement for RFI immunity. With immunity of 40
V/m, there is no loss of performance in areas with multiple motors, computers, facsimile machines, etc.
• Panel Status Input (MC-760TVB only)
An ARM/DISARM input disables LEDs while the system is armed.
• Remote LED Enable (MC-760TVB only)
The alarm LED can be enabled or disabled from a remote location (control panel or central station).
Without an alarm LED flashing on the sensor, unauthorized attempts to ‘map’ the pattern are impossible.
• Tamper and Event Memories
(MC-760TVB only)
The MC-760TVB include cover and wall tampers, plus alarm memory for reviewing event history.
Passive
Infrared
Motion
Sensor
MC-760 Series
SPECIFICATIONS:
Physical Dimensions:
• 11.2 cm H x 6 cm W x 4 cm D
(4-3/8” x 2-1/4” x 1-1/2”)
Weight:
• Product only: 113 g (4 oz.)
• Packaged product: 162 g (5.7 oz.)
Range:
• 18m (60’) in front of sensor (max)
• 25m (82’) at 45° angle from sensor (max)
Mounting Locations:
• The unit can be corner, wall or bracket mounted.
Mounting Height:
• 2.3m (7’6”) or 3m (10’)
(Sensor ships with the 2.3 m lens)
PIR Fields-of-View:
• Long range: 22
• Intermediate: 12
• Lower: 6
• Look-down: 2
Sensitivity:
• Switch selectable (high and normal)
(sensor ships at normal sensitivity)
Small Animal Immunity:
• For small animal immunity, the sensor must be set at normal sensitivity, mounted at the standard mounting height, and use the standard lens. Animals cannot come within a 2m (6 ft.) radius of the sensor and cannot exceed a combined weight of 11 kg (25 lbs.).
Alarm Relay:
• Form A (normally closed)
• 50mA, 30VDC; Rs=10 Ohms
Power Requirements:
• 8 - 14VDC; 9mA at 12VDC (no alarm; LED(s) off).
15mA max with LED on. 50mA max during self-test
(0.75 second duration).
• Self-test is done after warm-up, then once every
24 hours. Timing is randomized to avoid multiple sensors simultaneously in self-test.
Operating Temperature:
• -10° to 55° C (14° to 131° F)
• Relative humidity: 5% to 95% non-condensing
PIR White Light Immunity:
• 6,500 lux minimum
ESD Immunity:
• ±12kV per IEC 801-2
RFI Immunity:
• 40V/m 10 MHz to 1000 MHz
Control Signal Levels
(MC-760TVB only)
Test and Arm / Disarm:
• 0.0VDC > (-) >1.5 VDC
• 3.5VDC > (+) >V
• Open inputs = Inactive / Disarm
Approvals / Listings
• UL listed
• FCC / IC verified
• CE
• VdS Class B, Environmental II (MC-760TVB only)
• C-Tick
Passive
Infrared
Motion
Sensor
DETECTION PATTERNS:
Wide Angle Lens or Pet-Alley Lens
TOP VIEW
Pet-Alley Lens
SIDE VIEW
Curtain Lens
TOP VIEW (use as reference for 3 m [10’] mounting height)
ACCESSORIES:
• Lens Option Kit 18
(3 m [10’] mount height)
P/N 0-900-053
• Lens Option Kit 19 (curtain)
P/N 0-900-053-02
• Lens Option Kit 20 (pet)
P/N 0-900-053-03
• Ceiling Mount Bracket (SMB-10C)
P/N 0-000-111-01
• Swivel Mount Bracket (SMB-10)
(MC-760 only)
P/N 0-000-110-01
Curtain Lens
SIDE VIEW (pattern shown is for 2.3 m [7.6”] mounting height, and is representative of the 3 m [10’] mounting height.)
Wide Angle Lens
SIDE VIEW (2.3 m [7’6”] mounting height)
Note: When using the curtain lens the sensor must be set at
HIGH sensitivity. The minimum width for detection is 1.8 m (6’).
165 Eileen Way, Syosset, NY 11791
Copyright ©2002 Pittway Corporation
ADEMCO is an ISO9001 Registered
Company
Wide Angle Lens
SIDE VIEW (3 m [10’] mounting height)
ORDERING:
Part No.
Description
MC-760 Passive Infrared Motion Sensor
L/MC760/D 5/02
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement