Metrel General Catalogue_2022 by TransNet NZ Ltd

Catalogue 2022 Measuring instruments and testers

www.metrel.si

Measuring and Regulation Equipment Manufacturer Metrel is an international Group and an expert in the research, development and production of test and measurement equipment. Metrel brand name is worldwide recognized and associated with high quality test and measurement products. Metrel’s instruments provide test and measurement solutions in different maintenance areas including the safety testing of electrical installations and appliances, power quality analysis. In short, our products help to provide information about the safety and functionality of different installations and environments. Through innovative design, electronics and software solutions we provide accurate, reliable and safe to use products. The company strives to be the leader in advanced technological solutions and therefore invests over 10 % of the yearly turnover into the R&D department. Our wide range of products is backed up with a complete support package including repair and calibration, technical support and customer training programs. A detailed calibration certificate is supplied as standard with all Metrel products.

SALES NETWORK Metrel’s products are sold and serviced in over 80 countries by local agents and distributors. Our associated companies are managed by local people who know the special needs of their markets. Sales engineers and specially trained technicians staff give excellent service to our customers. The GERMAN market is supported by Metrel GmbH based in Eckental (www. metrel.de) and the UK market is supported by Metrel UK based in Epsom Surrey (www.metrel.co.uk). Inquiries for other countries please direct to Metrel d.d., the headquarters based in SLOVENIA (www. metrel.si).

COMMITMENT TO QUALITY Metrel’s quality assurance system is based on BS EN ISO 9001. Through permanent training and education of our employees we strive to increase the efficiency and quality of all our processes. Our commitment to quality is recognized by our customers and is ensured by continuous and extensive research and development of new, accurate, reliable and safe to use products. 2

ECOLOGY Metrel test and measurement equipment complies with the RoHS and WEEE directives. Metrel strives to meet its goals with the most efficient use of resources and the least possible impact on the environment.

RESEARCH, DEVELOPMENT AND PRODUCTION The research, development and production of Metrel’s products are based in Europe (Slovenia) at Metrel d.d. The company strives for total quality control. A dedicated quality assurance department ensures strict adherence to customer specifications. Highly competent R&D engineers provide advanced solutions for our customers.

TEST LABORATORY The highly professional test laboratory based in Metrel d.d. provides internal services including the testing of components, subassemblies and prototypes of products. This enables Metrel to launch safe and reliable new products into the market. The laboratory provides testing according to the Low Voltage Directive (2006/95/EC) and the EMC Directive (2004/108/EC). The main standards that Metrel also complies to include IEC/EN 61010 and IEC/EN 61326.

PRODUCTS Metrel is producing test and measurement equipment that is covering the following fields: • Electrical Installations Safety Testing (IEC/EN 61557, VDE 0413, VDE 0100, BS 7671, HD 60364, CEI 64.8, AS/NZS 3017, AS/NZS3760). • Portable Appliances, Machines and Switchgears Safety Testing (IEC/EN 60204-1, IEC/EN 61439-1, IEC/EN 60335-1, VDE 0701-0702). • Testing of Power Distribution Systems and Power Quality Analysis (EN 50160). • Equipment for Laboratories and Schools: Metrel produces a variety of instruments for electrical testing laboratories and educational purposes. Typical application areas are: electrical workshops, testing labs, research, development and education. Besides the test and measurement product portfolio offered by Metrel d.d. Metrel’s daughter company Metrel Mehanika d.o.o. also provide a variety of products focusing on metal processing. Their core business is sheet metal production, milled / turned production, manufacturing of tools and surface protection. For more information please visit www.metrel-mehanika.si.

SERVICES Metrel provides a variety of services relating to training, repair and calibration of test equipment to the highest standards in the industry.

REPAIR Metrel provides fast and efficient repair services either directly at Metrel’s headquarters service centre or through approved business partners.

CALIBRATION The Calibration Laboratory at Metrel DUS is able to calibrate electronic measuring instruments and devices in compliance with the requirements of the ISO/IEC 17025 standard. The laboratory is accredited by Slovenian Accreditation (SA), a member of European Accreditation (EA), signatory of the Multilateral Agreements for the European Co-operation for Accreditation (EA) and International Laboratory Accreditation Co-operation (ILAC) for calibration and testing. The products from the calibration can be issued with an Inspection report and a Calibration

Contact us certificate (non accredited). Accredited calibration certificate can also be issued if it is required by the customer.

TECHNICAL SUPPORT Metrel provides the following support to its customers and distributors: • On-line technical support: any inquires related to Metrel products can be sent onto a designated e-mail address: - info@metrel.si - GLOBAL market; - info@metrel.co.uk - UK market; - info@metrel.de - GERMAN market. • Technical support line: the technical support can be obtained also over the phone: +386 (0)1 7558 200 - GLOBAL market; +44 (0) 1924 245 000 - UK market; +49 (0) 9126 28996-0 - GERMAN market. • B2B web support: for Metrel partners a B2B zone enables to obtain technical and marketing information. • Download centre: enables to download files with technical product information. Visit https://www.metrel.si/en/ downloads/ • Product finder: makes it easy for you to find the right product for your application from a wide range of Metrels Test & Measurement products. Visit https:// www.metrel.si/en/shop/

GLOBAL MARKET Measuring and Regulation Equipment METREL d.d. Ljubljanska c. 77 SI-1354 Horjul Tel: +386 (0)1 75 58 200 E-mail: info@metrel.si Web: www.metrel.si

TRAINING CENTER Metrel d.d. offers to its customers and distributors: • Training on Metrel’s instruments: the product training can be customized on the customer’s needs. Metrel can offer training on technical standards, measuring and test methods, use and application of Metrel instruments. • Complete distributor setup training: when establishing a new distributor, Metrel can offer a complete “package” on product training, repair and calibration training and assign in establishing e local calibration and repair department. • Training for calibration and repair of Metrel products: this is help for Metrel’s existing and new distributors to enable a high standard of local support to customers who purchase a Metrel product. • Bespoke training for larger end users: in case that a larger customer is requesting training, Metrel can organize the training according to their specific needs. This can be carried out on site or at Metrel’s premises.

GERMAN MARKET

UK MARKET

Mess und Prüftechnik Metrel GmbH Orchideenstraße 24 90542 Eckental Tel.: +49 (0) 9126 28996-0 E-mail: info@metrel.de Web: www.metrel.de

Test and Measuring Equipment Metrel UK ltd. UNIT 16, 1st Qtr Business Park Blenheim Road, UK-KT19 9QN Epsom Surrey Tel.: +44 (0) 1924 245 000 E-mail: info@metrel.co.uk Web: www.metrel.co.uk

Measuring and Regulation Equipment Manufacturer

Instruments Designed with Future in Mind

Metrel WEB

METREL is one of the world leading manufacturers and distributor of high quality electrical measurement and test instruments, providing the market with innovative solutions on the following segments:

• General information about our products with quick and practical SEARCH function for product searching. • Detailed information about our products in extended product specifications. • Latest information about training and seminars. • Service information. • Download centre. • Product finder. • Helpdesk, improved with ticketing system. • Answers to common questions related to our products under Frequent Asked Questions (FAQ) rubric. • News and information about exhibitions, fairs, meetings and conferences. • Faster and more sufficient activities in relations with our worldwide distributors (B2B). • Links to other interesting sites that offers information about occupation safety, metrology, technical heritage, standardization, regulations and technical experience.

ELECTRICAL INSTALLATION SAFETY Metrel offers single and multifunctional electrical installation testers. The instruments are used for initial and periodic testing of domestic and industrial installations, testing of single and multiphase systems and testing of TT, TN, IT and 115 V systems. Metrel meters offer wide selection of functionalities and measurements (depending on the model), can be downloadable or non-downloadable. All meters comply with the European standard IEC/EN 61557.

HIGH VOLTAGE DIAGNOSTICS Metrel’s high voltage diagnostic equipment (5 ... 10 kV) is used for testing insulation resistance of rotating machinery and cables, production line periodic testing and maintenance, troubleshooting and analysis of all kinds of insulation problems. It gives effective readings in high noise environments such as high voltage substations and switchyards. Some of key features of Metrel’s instruments (depends on the model) are PI, DD, DAR testing, R(t) graph plotting, high 5 mA charging current, selectable noise rejection filters, etc.

PORTABLE APPLIANCE / MACHINE / SWITCHBOARD SAFETY Metrel’s testers can be used in professional PAT testing, general PAT testing, factory / warehouse PAT testing, multi-location PAT testing and after repair safety testing. Metrel’s instruments offer a selection of key features for example auto sequencing, automatic testing, Pass / Fail evaluation of results, RCD testing, project uploading, bar-coding system and Pass / Fail barcode label printing, flash test, test of both 230 V appliances and 115 V appliances and many more.

POWER QUALITY ANALYSIS The power quality analysers can be widely used for general power quality assessment in distribution and industrial low and middle voltage electric systems (according to IEC 61000-4-30; Class A, Class S), capturing and recording of power supply events, flicker measurement, power factor correction measurements, harmonics measurements, transients recording and over-voltage protection devices performance testing, assessment of UPS, consumption profile recording, etc.

MULTIMETERS / CLAMP METERS / VOLTAGE TESTERS / THERMAL CAMERAS The digital multimeters, clamp meters and voltage continuity testers are used for general / basic testing up to high level industrial testing, electronic fault finding, field servicing and heavy duty electrical testing. Some of the key features (depending on the model) are TRMS testing, high accuracy, temperature measurement, lead alert, conductance, PC communication, autocheck function, recording of data, etc.

PRODUCT FINDER Product finder enables filtering of the products with the main filter selectors oriented to, Product Group, Application and Standard, In addition to the main filter selector you can also add additional criterion such as products’ Main Features, Additional Features or Special Accessories.

Content Electrical Installation Safety Testing 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

GOOD TO KNOW Testing the Safety of Electrical Installation

1.02

MULTIFUNCTIONAL TESTERS Selection Guide for Multifunctional Testers AUTO SEQUENCE testing MI 3155 EurotestXD MI 3152 EurotestXC MI 3152H EurotestXC 2,5 kV MI 3102 BT EurotestXE MI 3102H BT EurotestXE 2,5 kV MI 3100 SE EurotestEASI MI 3125BT EurotestCOMBO

1.06 1.08 1.09 1.12 1.14 1.16 1.18 1.20 1.22

PHOTOVOLTAIC AND ELECTRICAL INSTALLATIONS TESTER Selection Guide for Photovoltaic and Electrical installations Testers MI 3108 EurotestPV MI 3109 EurotestPV Lite

1.25 1.26 1.28

SINGLE-FUNCTIONAL TESTERS Selection Guide for Single-functional Testers MI 3121 Insulation / Continuity MI 3122 Z Line-Loop / RCD MI 3123 Earth / Clamp MI 3110 EurotestIM MI 2088 Earth Insulation Tester

1.30 1.32 1.34 1.36 1.38 1.40

OTHER INSTRUMENTS / ADAPTERS / ACCESSORIES MI 3144 Euro Z 800 V MI 3143 Euro Z 440 V A 1722 PRCD adapter A 1632 eMobility Analyser A 1631 EV monitoring cable A 1532 EVSE adapter A 1532 XA EVSE adapter A 1507 3-Phase Active Switch MI 2093 Line Tracer CS 2099 Eurocheck A 1199 Ro - Adapter

1.42 1.44 1.46 1.48 1.50 1.52 1.54 1.56 1.58 1.59 1.60

SELECTION GUIDE FOR EIS ACCESSORIES

1.61

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Electrical Installation Safety

ELECTRICAL INSTALLATION SAFETY High Voltage Insulation / Continuity / Earth / Transformer Appliance / Machine / Switchboard Safety Power Quality Analysis Equipment for laboratories and Schools Multimeters / Clamp meters / Voltage testers / Thermal cameras Software

1. 1

Good to know Testing the Safety of Electrical Installation Find out more about testing safety of electrical installations According to European standards requirements electrical installation safety testing includes a combination of following tests: • Insulation resistance, • Continuity of protective conductors and equipotential bonding, • RCD testing, • Line and fault loop impedance, • Earth resistance testing (two-wire method without probes, three / four-wire method with two probes, method with current clamp and two probes, method with two current clamps) • Specific earth resistance, • Phase sequence, voltage and frequency. These tests are performed in order to ensure that the requirements are met for the protection of persons, livestock and property against the risk of electric shock and to ensure that the automatic disconnection of the supply is performed correctly. Insulation resistance The insulation is intended to prevent any contact with live parts and withstanding mechanical, chemical, electrical and thermal stresses. Insulation test discloses insulation faults caused by pollution, moisture, deterioration of insulation materials etc. Insulation resistance measurement is covered by the IEC / EN 61557-2 standard. The power must be switched off and the installation must be disconnected before performing this test to ensure that the test voltage will not be applied to other equipment electrically connected to the circuit to be tested, particularly devices sensitive to voltage surges. Insulation resistance shall be measured between: • Line conductors, • Line and PE conductors, • Line and Neutral conductors, • Neutral and PE conductors.

Test circuit for insulation resistance measurement

1. 2

Test circuit for insulation resistance measurement

The insulation resistance test is performed with a DC voltage on a dead system and the resistance must be above the minimum limit set out in the appropriate standards and regulations. Limit values for electrical installations acc. to IEC 60364-6: Rated voltage of circuit (V)

DC test voltage (V)

Insulation resistance (MΩ)

LV secondary switchboard or LV 250 main switchboard

≥0.5

Less than or equal to 500 V 500 including LV main switchboard

≥1.0

Greater

≥1.0

1.000

METREL’s hint: EurotestAT and EurotestXA have built-in the “Insulation ALL” function which enables performing of 3-port insulation test (L-N, L-PE, N-PE or L1-L2, L1-L3, L2-L3) in one step. This is a very time saving feature especially if measuring insulation on outlets. Continuity of protective conductors and equipotential bonding The purpose of continuity measurement is to check the continuity of the protective conductors, the main and supplementary equipotential bonds. The test is carried out using a measurement instrument capable of generating a no-load voltage of 4 to 24 V (DC or AC) with a minimal current of 200 mA.

Test circuit for continuity R200 mA measurement

Test circuit for continuous resistance measurement

RCD testing RCD devices are used as protection against dangerous fault voltages and fault currents. Various test and measurements are required for verification of RCDs in RCD protected installations. Measurements are based on the EN 61557-6 standard. Scope of RCD test is: • to verify effectiveness and proper operation of the RCDs; • to verify disconnection times and trip out currents of RCDs; • to verify that there are no or limited present fault currents in the installation. The following measurements and tests of RCDs can be performed: • Contact voltage, • Trip-out time, • Trip-out current, • RCD autotest.

Continuity test is covered by the EN 61557-4 standard. The measured resistance must be lower than a threshold specified by the standard applicable to the installation tested, which is usually 2 Ω. As the resistance value is low, the resistance of the measurement leads must be compensated, particularly if very long leads are used. METREL’s hint: EurotestAT and EurotestXA can perform the N – PE loop test between instrument’s N and PE test terminals. This makes testing with the plug test cable on outlets possible.

Accessories 1.61

Circuit for testing RCD

METREL’s hint: METREL installation testers have built-in the “RCD AUTO” function which performs RCD testing at x1/2, x1 and x5 current multipliers at both 0° and 180° automatically. With this function all relevant RCD tests can be carried out in one step which is very simple and time saving feature.

RCD selection table according to their sensitivity: AC type

A type



 

B type

•

No response

•

No response

•

U U U

t t t

U U

t t t

U U

 

t t t

Line impedance Line impedance is measured in loop comprising of mains voltage source and line wiring (between the line and neutral conductors or between lines on a 3-phase system). It is covered by requirements of the EN 61557-3 standard. Scope of line impedance test is: • to verify effectiveness of installed over current devices; • to verify internal impedance for supplying purpose. The line-neutral short circuit loop consists of: • Power transformer secondary impedance ZT, • ZL (phase wiring from source to fault), • ZN (neutral wiring from source to fault). The line to neutral impedance is the sum of impedances and resistances that forms the line to neutral loop. In three phase system there are three line-neutral impedances (ZL1-N, ZL2-N, ZL3-N). ZLN = ZL+ ZN+ZTLN The prospective short circuit current IPSC is defined as:

IPSC must be higher than current for rated disconnection time of the over current disconnection device. The line – neutral (or line - line) impedance should be low enough e.g. prospective short circuit current high enough that installed protection device will disconnect the short circuit loop within the prescribed time interval. METREL’s hint: METREL installation testers have built-in tables with fuses and RCDs parameters. When line test is performed, the measured value is automatically compared to the maximum values set out in the standard (EN 61557) and either a PASS or FAIL symbol will appear on the screen to inform the user if the result is within the required limits. Fault loop impedance Fault loop is a loop comprising mains source, line wiring and PE return path to the mains source. The measurement is covered by requirements of the EN 61557-3 standard. Scope of loop impedance test is: • to verify effectiveness of installed over current and / or residual current disconnection devices; • to verify fault loop impedances, prospective fault currents and fault voltage values. In TN systems the fault loop ZL-PE consists of: • ZT (power transformer secondary impedance); • ZL (phase wiring from source to fault); • RPE (PE / PEN wiring from fault to source). The fault loop impedance is the sum of impedances and resistances that forms the fault loop. ZLPE = ZL+ RPE+ZT The prospective fault current IPSC is defined as:

ULN >Ia IPSC= ____ ZLN

Circuit for measurement of line impedance

ULPE >Ia IPSC= ____ ZLPE

METREL’s hint: METREL installation testers have built-in tables with fuses and RCDs parameters. When loop test is performed, the measured value is automatically compared to the maximum values set out in the standard (EN 61557) and either a PASS or FAIL symbol will appear on the screen to inform the user if the result is within the required limits. Earth resistance Earth resistance testing is used on TN, TT and IT systems to ensure that the resistance of the earth electrode is sufficiently low so that, in the case of a fault, a dangerous voltage does not appear on any parts of the installation or on any appliances which have a connection to earth. The measurement conforms to the EN 61557-6 standard. Scope of earth resistance test is: • Earthing of exposed conductive parts assures that the voltage on them stays below dangerous level in case of a fault. In TN installations the earthing is realized at the source and / or distribution points that’s why the earthing resistances are usually very low (below 1Ω). TT installations have their own main earthing. The resistances are usually higher than in TN systems (from few Ω up to several hundred Ω). Because of this dangerous fault voltages and body currents can occur at relatively low fault currents. Therefore TT systems usually have additional RCD protection. The following earth resistance measuring methods are available: • Standard 3-wire (4-wire) method for standard resistance to earth measurements; • 3-wire (4-wire) method with one clamp, for measuring resistance to earth of individual earthing rods; • Two clamps method for measuring resistance to earth of individual earthing rods (recommended in IEC 60364-6 for urban areas); • Specific earth resistance (is carried out in order to assure more accurate calculation of earthing systems e.g. for high-voltage distribution columns, large industrial plants, lightning systems etc.).

Circuit for measurement of fault loop impedance

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 3

Connection diagrams:

Recommended earth resistance measuring methods: TN system L1

L2 L3 N TN

Two clamps method (clamps around main N/PE cable). Circuits for three-wire measurement

TT system

Circuit for voltage measurements

L2 L3 N TT

Two-wire method (test from the socket between N and PE)

IT system

Circuit for voltage measurement, frequency and phase sequence L1

Circuits for three-wire measurement L2 L3 N TT

Three-wire method (test leads to auxiliary rods in triangle)

Lightning conductor

Circuit for two clamps measurement

Two clamps method

Limits: 2 Ω – above ground, 10 Ω – complete system, 20 Ω – individual electrode or 8% of specific earth resistance. Circuit for measurement of specific earth resistance

PE test terminal A very dangerous situation can occur in case dangerous voltage is applied to the PE wire or other accessible metal parts. A common reason for this fault is incorrect wiring. Metrel’s instruments are equipped with touchable PE electrode (TEST key). When touching TEST key in all functions that require mains supply the user automatically performs test for the presence of phase voltage at the PE protection terminal.

Phase sequence, voltage and frequency Phase sequence test is used for determining of line voltages order in 3-phase systems. This order defines direction of rotation of motors and generators. Phase sequence measurement conforms to the EN 61557-7 standard.

1. 4

METREL’s hint: METREL installation testers have on-line voltage monitor which in all functions displays on one screen voltages between L to PE, L to N and N to PE (single phase system) or L1 to L2, L2 to L3 and L1 to L3 (3-phase system). This feature allows quickly identify incorrect connections, disconnected wires or incorrect voltages.

Accessories 1.61

Example for application of PE test terminal

The overvoltage category specifies the highest mains voltage (or lightning strike, short circuit due to incorrect use, etc.) that the instrument can withstand without danger for the tester or for the object being measured. The standard specifies four overvoltage categories. The overvoltage category affects component sizing via the air gap. The higher the category, the bigger is the distance to the power source. CAT I - electronic devices, signal level.

• is the installation single- or three-phase; • is the RCD present in the installation. To simplify the selection of the appropriate test sequence the detailed flow chart is supplied with the instrument. After choosing the AUTO SEQUENCE® and setting the limits the user just has to press TEST button and the sequence will automatically perform all predefined tests. When the sequence is finished, the

instrument will display overall PASS / FAIL decision. All the results can be saved to the structured instrument’s memory at once for further data verification and automatic generation of test report with the help of the PC SW EuroLink PRO. The revolutionary AUTO SEQUENCE® procedure allows performing testing up to 5 times faster in comparison with conventional methods.

CAT II - domestic appliances, portable appliances, single-phase loads, sockets, (>10 m from CAT III; >20 m from CAT IV). CAT III - three-phase distribution systems, lighting systems in large buildings, distribution panels. CAT IV - three-phase systems on power stations, electricity meters, outdoor installations and supply cable incoming feed.

CAT I

CAT II

CAT III

CAT IV

AUTO SEQUENCE® is a unique patented by Metrel testing procedure which allows performing of series of requested installation tests with a single press of TEST button. The results of each test are automatically compared to pre-set limits and PASS / FAIL evaluated.

Guide through Verification on Low-voltage electrical installations: IEC 60364-6

While ensuring efficient, fast and easy way of installation safety testing AUTO SEQUENCE® guarantees absolute safety of operator due to automatic detection of possible irregular installation conditions. Definite number of test sequences is already stored in the instrument. Besides, user can program and store custom test sequences. The user can choose appropriate preprogrammed AUTO SEQUENCE® procedure according to following criterions: • which part of electrical installation will be tested; • which earthing system is implemented (TN, TT or IT);

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 5

Multifunctional installation testers Selection Guide for Multifunctional Testers FEATURES

Description

MI 3155 EurotestXD

INSULATION

Insulation resistance Test voltage (VDC) Autotest insulation L-PE, N-PE, L-N Diagnostic test (PI, DAR calculation) Continuity of PE conductors with automatic polarity change, test current 200 mA Low resistance measurement (continuous measurement), test current 7 mA Line impedance with Ipsc calculation 4 wire Line impedance with Ipsc calculation Loop impedance with Ipsc calculation 4 wire Loop impedance with Ipsc calculation RCD Trip Lock loop impedance Built-in fuse tables for PASS / FAIL evaluation Contact voltage measurement without RCD tripping RCD trip-out time RCD trip-out current with rising test current Automatic testing of RCDs RCD type (general and selective) MI RCD, EV RCD / PRCD-S, PRCD-K AC voltage measurement Online voltage monitor Frequency measurement L1 - L2 - L3 Earth resistance 3-(4-)wire method Earth resistance 3-(4-)wire method with additional current clamp Earth resistance measurement with 2 current clamps Specific earth resistance Programmable AUTO SEQUENCEs Pre-programmed AUTO SEQUENCEs Predefined mini AUTO TESTs TRMS leakage / load current Illuminance measurement Varistor test Fuse / fault locator High resolution loop impedance (mΩ) EVSE adapter Insulation Monitoring Devices (IMD) testing (IT systems) First fault leakage current (ISFL) measurement (IT systems) Nominal frequency range PASS / FAIL evaluation of test results IT earthing mode systems support Touch electrode HELP menu RS232 / USB / Bluetooth Work space manager Memory /SD card Colour touch screen MESM / EuroLink PRO Professional PC SW Advanced PC SW Safety category

• 50 … 2500 • • • • • • • • • • • • • • AC / A / B / F / B+ •/• • • • • • Option Option Option • • • Option Option • • Option Option • • 14 … 500 Hz • • • • •/•/• • 8 GB • •/• Option CAT III / 600 V CAT IV / 300 V IP 56 4.4 Ah Li-Ion • 1.78 252 x 111 x 165

CONTINUITY AND LOW RESISTANCE MEASUREMENT LINE / LOOP IMPEDANCE

RCD TESTING

VOLTAGE, FREQUENCY

PHASE SEQUENCE EARTH MEASUREMENTS

AUTO SEQUENCE

OTHER MEASUREMENTS

OTHER FEATURES

COMMUNICATION PORTS & PC FEATURES

MEMORY SOFTWARE

GENERAL DATA

IP protection Batteries Built-in battery charger Weight (kg) Dimensions (mm)

1. 6

Accessories 1.61

MI 3152 EurotestXC

MI 3152H EurotestXC 2,5 kV

MI 3102 BT EurotestXE

MI 3102H BT EurotestXE 2.5kV

MI 3100 SE EurotestEASI

MI 3125 BT EurotestCOMBO

• 50 … 1000

• 50 … 2500

• 50 … 1000

• 50 … 2500

• 50 … 1000

• • •

• • • •

• • •

• • • •

• • •

•

• • • • • • AC / A / B / F / B+ •/• • • • • • Option Option Option

• • • • • • AC / A / F •/• • • • • •

• • • • • • AC / A / B / F / B+ •/• • • • • •

• • • • • • AC / A / F

• • • • • • AC / A / F •/• • • • •

• • • • • • AC / A / B / F / B+ •/• • • • •

Option Option

Option

• • Option Option • • Option Option • • 14 … 500 Hz • • • • •/•/• • 8 GB • •/• Option CAT III / 600 V CAT IV / 300 V IP 40 6 x AA • 1.37 230 x 103 x 115

• • Option Option • • Option Option

• Option Option

•

Option • • 45 … 65 Hz • • • • •/•/•

Option

45 … 65 Hz •

• • •/•/•

• • • / • / Option

45 … 65 Hz • • • • •/•/•

4 / 1800

4 / 1700

•/• • Option CAT III / 600 V CAT IV / 300 V IP 40 6 x AA • 1.31 230 x 103 x 115

•/• • Option CAT III / 600 V CAT IV / 300 V IP 40 6 x AA • 1.0 140 x 80 x 230

14 … 500 Hz • • • •/•/• • 8 GB • •/• Option CAT III / 600 V CAT IV / 300 V IP 40 6 x AA • 1.37 230 x 103 x 115

Measuring and Regulation Equipment Manufacturer

• • • • •

Accessories 1.61

1. 7

Electrical Installation Safety

Multifunctional installation testers AUTO SEQUENCE testing AUTO SEQUENCE® testing is a way of testing introduced in Metrel’s testers over a decade ago and now re-introduced with new generation testers. AUTO SEQUENCEs not only simplify the measuring procedure, but also minimizes human error when preforming measurements. This way a series of user-defined single tests is done with a push of a single button. Depending on the instrument model the user can create AUTO SEQUENCEs in PC SW MESM and upload them from a PC to the device or download them from the device for editing and sharing.

AUTO SEQUENCEs can be prepared and/or edited in PC SW MESM and later uploaded to any device. The device will only perform supported measurements. Supported devices are: • MI 3155 EurotestXD • MI 3152 EurotestXC (no AUTO SEQUENCE® upload possible) • MI 3152 H EurotestXC 2.5 kV (no AUTO SEQUENCEs upload possible) • MI 3280 Digital Transformer Analyser • MI 3290 Earth Analyser • MI 3360 OmegaGT XA • MI 3394 CE MultiTesterXA AUTO SEQUENCEs may be run independently or through a pre-prepared structure in the memory organizer.

1. 8

Accessories 1.61

Electrical Installation Safety

Multifunctional installation testers MI 3155 EurotestXD MI 3155 EurotestXD is the newest flagship of Metrel’s most advanced line of multifunctional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. It is fully compliant with functionality standards (e.g. IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. Besides those, the instrument supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.

MEASURING FUNCTIONS • Live Transformer’s Impedance Measurement with Four Wire Test; • Hi-precision Short Circuit Current evaluation with Calculated Hot factor; • 3-wire test of PE (RPE function) without extension lead conductor; • Autotest insulation function between L-N, N-PE and L-PE (R ISO ALL function); • 4 wire continuity test; • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • 3-wire and 4-wire wire loop impedance (LPE) measurement with Trip Lock (EV) RCD function; • Touch voltage / Contact voltage measurement with external P/S probe. • 2-wire and 3-wire line impedance (L-L, L-N) measurement; • 1-phase / 3-phase TRMS voltage and frequency measurements; • Line, loop and RCD measurements at frequency range 16 ... 400 Hz; • Phase sequence; • Power and THD measurement (up to the 12th harmonic);

• RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, EV RCM, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • First fault leakage current (ISFL); • Testing of Insulation Monitoring Devices (IMDs); • Machine mode support with time discharge; • Illumination (option); • High resolution Loop impendance (mΩ) (option); • EVSE (Electrical Vehicle Supply Equipment) support (option); • Determining location of cables (option); • QR and/or barcode scanner support (option).

KEY FEATURES • Programmable AUTO SEQUENCEs.* • Predefined profile dependent AUTO SEQUENCEs. • Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe); Auto IT (U, Zln, Isc, Isfl, IMD). • High resolution colour touch screen, 4.3” TFT • Functional inspections.

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

• Visual inspections. • Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs. • EVSE AUTO SEQUENCEs and function inspections. • Machine functional and visual inspections. • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • Monitoring of all 3 voltages in real-time. • Automatic polarity reversal on continuity test. • Automated RCD testing procedure (RCD AUTO). • Automated Impedance testing procedure (Z AUTO). • Measurement filtering according to the selected area group. • Built-in charger and rechargeable batteries as standard accessory. • BT communication with PC, Android tablets and smart phones via built-in BT. • PC SW Metrel ES Manager (structure and report creation, data upload/download). * • Optional aMESM Android app (structure and report creation, data upload/ download). ** * Available with MESM PRO licence ** Available with EU Set

1. 9

TECHNICAL DATA Function CONTINUITY

INSULATION RESISTANCE

RCD

IMPEDANCE

Measuring range

Resolution

Accuracy

Test Current 7 mA 2-wire

0.00 Ω ... 19.99 Ω 20.0 Ω ... 1999 Ω

0.1 Ω 1Ω

±(5 % of r. + 3 digits)

Test Current 200 mA 2-wire, 4-wire

0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.)

R iso, R iso all 1 Test Voltage 50/100/250 V

0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ

0.01 MΩ 0.1 MΩ 0.1 MΩ

±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.)

R iso, R iso all 1 Test Voltage 500/1000 V

0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 199.9 MΩ 200 MΩ ... 999 MΩ

0.01 MΩ 0.1 MΩ 1 MΩ

±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.)

R iso, R iso all 1 Test Voltage 2500 V

0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 199.9 MΩ 200 MΩ ... 999 MΩ 1.00 GΩ ... 19.99 GΩ

0.01 MΩ 0.1 MΩ 1 MΩ 0.01 GΩ

±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) ±(10 % of r.)

DAR, PI

0.01 ... 9.99 10.0 ... 100.0

0.01 0.1

±(5 % of r. + 2 digits) ±(5 % of r.)

Varistor test AC, DC 2

0 V … 1000 V (DC) 0 V … 625 V (AC)

±(3 % of r. + 3 digits)

RCD Uc

0.00 V ... 19.99 V 20.0 V ... 99.9 V

0.1 V

(-0 %/+15 %) of r. ± 10 digits (-0 %/+15 %) of r.

RCD (t),

0.00 ms ... 40.0 ms 0.0 ms ... max. time

0.1 ms

±1 ms ±3 ms

RCD I Ramp

0.2xI∆N ... 1.1xI∆N (AC, MI, EV a.c.) 0.2xI∆N ... 1.5xI∆N (A, I∆N ≥30 mA) 0.2xI∆N ... 2.2xIvN (A, I∆N <30 mA) 0.2xI∆N ... 2.2xI∆N (B, MI, EV d.c.)

0.05xI∆N

±0.1xI∆N

0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ ... 9.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(3 % of r. + 3 digits)

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(3 % of r. + 3 digits)

Zs RCD 4

0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ ... 9.99 kΩ

TRMS (0, 14 ... 500 Hz)

0 … 550 V

±(2 % of r. + 2 digits)

Frequency

0.00 Hz .. 9.99 Hz 10.0 Hz ... 499.9 Hz

0.01 Hz 0.1 Hz

±(0.2 % of r. + 1 digits)

TRMS, AC with A 1018, range=20 A

0.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 19.99 A

0.1 mA 1 mA 0.01 A

±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(3 % of r.)

TRMS, AC with A 1019, range=20 A

0.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 19.99 A

0.1 mA 1 mA 0.01 A

Indicative ±(5 % of r.) ±(3 % of r.)

TRMS, AC/DC with A 1391, range=40 A

0.00 A ... 1.99 A 2.00 A ... 19.99 A 20.0 A ... 39.9 A

0.01 A 0.01 A 0.1 A

±(3 % of r. + 3 digits) ±(3 % of r.) ±(3 % of r.)

TRMS, AC/DC with A 1391, range = 300 A

0.00 A ... 19.99 A 20.0 A ... 39.9 A 40.0 A ... 299.9 A

0.01 A 0.1 A 0.1 A

Indicative Indicative ±(3 % of r. + 5 digits)

3 wire 5

0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 9999 Ω

0.01 Ω 0.1 Ω 1Ω

±(5 % of r. + 5 digits)

2 clamp

0.00 Ω ... 19.99 Ω 20.0 Ω ... 30.0 Ω 30.1 Ω ... 39.9 Ω

0.01 Ω 0.1 Ω 0.1 Ω

±(10 % of r. + 10 digits) ±(20 % of r.) ±(30 % of r.)

Specific earth resistance

0.0 Ωm … 99.9 Ωm 100 Ωm ... 999 Ωm 1.00 kΩm ... 9.99 kΩm 10.0 kΩm ... 99.9 kΩm 100 kΩm ... 9999 kΩm

0.1 Ωm 1 Ωm 0.01 kΩm 0.1 kΩm 1 kΩm

±(5 % of r.) for Re 1 Ω … 1999kΩ ±(10 % of r.) for Re 2 kΩ … 19.99kΩ ±(20 % of r.) for Re > 20 kΩ

Power (P, S, Q)

0.00 W (VA, Var) ... 99.9 kW (kVA, kVar)

Zline (L-L, L-N), Ipsc, Zline 4-wire 3

Zloop (L-PE), Ipfc, Zloop 4-wire 3

VOLTAGE

CURRENT

EARTH RESISTANCE

POWER

HARMONICS

1. 10

Power factor

-1.00 ... 1.00

Voltage THD

0.1 % ... 99.9 %

Voltage harmonics

0.1 V ... 500 V

Voltage THD

0.1 % ... 99.9 %

Current harmonics and Current THD

0.00 A ... 199.9 A

Accessories 1.61

±(10 % of r.)

Function

Measuring range

Resolution

Accuracy

0.0 mA ... 19.9 mA

0.1 mA

±(5 % of r. + 3 digits)

5 … 640 kΩ

5 kΩ

Indicative values, up to 128 steps

0.01 lux ... 19.99 lux 20.0 lux ... 199.9 lux 200 lux ... 1999 lux 2.00 klux ... 19.99 klux

0.01 lux 0.1 lux 1 lux 10 lux

±(5 % of r. + 2 digits)

0.01 lux ... 19.99 lux 20.0 lux ... 199.9 lux 200 lux ... 1999 lux 2.00 klux ... 19.99 klux

0.01 lux 0.1 lux 1 lux 10 lux

±(10 % of r. + 3 digits)

Discharging time

0.0 s … 10.0 s

0.1 s

±(5 % of r. + 2 digits)

Peak voltage

0 V … 550 V

±(5 % of r. + 3 digits)

Power supply

7.2 V (4400 mAh Li-Ion battery pack)

Overvoltage category

600 V CAT III; 300 V CAT IV

Protection class

double insulation

COM port

BT, USB, RS232

Display

Colour TFT display, 4.3 inch, 480 x 272 pixels

Weight

1.78 kg

Dimensions

252 x 111 x 165 mm

FIRST FAULT LEAKAGE CURRENT (ISFL)

ISC 1, ISC 2

IMD TEST

Threshold indicative insulation resistance

ILLUMINANCE

Type B

Type C

DISCHARGING TIME

GENERAL

±(5 % of r.)

±(10 % of r.)

Measuring current 1 mA ... 3 mA Threshold current 1 mA Itest = 20 A @ 230 V; 16 ... 400 Hz 4 Itest MAX = 0.5 x I∆N 5 UOC < 30 VAC, ISC < 30 mA, f = 125 Hz 1

STANDARDS

APPLICATION

Functionality: • EN 61557; • DIN 5032 Other reference standards for testing: • IEC/EN/HD 60364-4-41; • IEC/EN 61008; • IEC/EN 61009; • IEC 62572; • EN 62955; • BS 7671; • AS/NZ 3017 Electromagnetic compatibility (EMC): • IEC/EN 61326-1 Safety: • IEC/EN 61010-1; • IEC/EN 61010-031; • IEC/EN 61010-2-030; • IEC/EN 61010-2-032

• Testing of TT, TN and IT systems; • Testing of single and multiphase systems; • Initial and periodic testing of domestic and industrial installations; • LV Installation safety testing; • Maintenance; • Lightning installations; • Testing on high and low frequency installations (industrial, aircraft, railway, mining, chemistry, ferry boat); • Construction sites; • Mobile LV Generator Units; • Machine and switchboard testing; • Medical installation testing; • Fire brigades, ambulance, military and police vehicles; • Mobile Video/Audio, Concert Halls, Fairs, Playgrounds; • Electrical Vehicle Supply Equipment (EVSE) testing; • Observation of insulation trends.

STANDARD SET

• Short instruction manual • Instruction manual (CD) • Guide for testing and verification of Low voltage installations (CD) • Calibration certificate • Metrel ES Manager (program installation) A 1481 (CD)

MI 3155 ST • Instrument MI 3155 EurotestXD • 4400 mAh battery pack • Power supply adapter 12 V / 3 A • Plug commander, 1.5 m • Test lead, 4-wire, 1.5 m • Test lead, 3-wire, 1.5 m • Test lead, 2-wire, 2,5 kV, 1.5 m • Test probe, 4 pcs (black, blue, green, red) • Crocodile clip, 6 pcs (black – 2 pcs, blue – 1 piece, green – 1 piece, red – 2 pcs) • Earth set 20 m • USB cable • Soft carrying bag • Soft carrying neck belt • Metrel ES Manager BASIC Licence*

Picture of MI 3155 EU set

MI 3155 EU • MI 3155 ST • 8800 mAh battery pack instead of 4400 mAh battery pack • Current clamp A 1018 (low range, leakage) • Current clamp A 1019 • Metrel ES Manager PRO Licence* • Metrel aMESM Android app *Metrel ES Manager can be downloaded free of charge from Metrel Web server.

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 11

Electrical Installation Safety

Multifunctional installation testers MI 3152 EurotestXC MI 3152 EurotestXC is an instrument from the new generation of Metrel’s multifunctional measuring instruments. The already well known functions like complete installation safety testing according to IEC/EN 61557 and AUTO SEQUENCE testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large colour touch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, varistor testing, earth resistance measurement, illuminance measurement and TRMS current measurement up to RCD tests, line and loop impedance tests, specific earth resistance measurements as well as ISFL measurements and the IMD tests.

MEASURING FUNCTIONS • Insulation resistance with DC voltage from 50 V to 1000 V; • Varistor test; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Line/Loop impedance combined also in one function Z AUTO; • Loop impedance with Trip Lock (EV) RCD function; • TRMS voltage and frequency measurements; • Phase sequence; • Power and THD measurement (up to the 12th harmonic); • RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, EV RCM, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • First fault leakage current (ISFL); • Testing of Insulation Monitoring Devices (IMDs); • Illumination (option); • High resolution Loop impendance (mΩ) (option); • EVSE AUTO SEQUENCEs and function inspections; 1. 12

• Determining location of cables (option); • QR and/or barcode scanner support (option).

KEY FEATURES • Predefined profile dependent AUTO SEQUENCEs. • Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe); Auto IT (U, Zln, Isc, Isfl, IMD). • High resolution colour touch screen, 4.3” TFT • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • Monitoring of all 3 voltages in real-time. • Automatic polarity reversal on continuity test. • Automated RCD testing procedure. • Automated Impedance testing procedure (Z AUTO). • Functional inspections. • Measurement filtering according to the selected area group. • Built-in charger and rechargeable batteries as standard accessory. • BT communication with PC, Android tablets and smart phones via built-in BT. • PC SW Metrel ES Manager (structure and report creation, data upload/download). • Optional aMESM Android app (structure and report creation, data upload/download). Accessories 1.61

APPLICATION • Testing of TT, TN and IT systems; • Testing of single and multiphase systems; • Initial and periodic testing of domestic installations; • Maintenance; • Lightning installations; • Medical installation testing; • Fire brigades, military and police vehicles; • Construction sites; • Mobile Video/Audio, Concert Halls, Fair, Playground; • Electrical Vehicle Supply Equipment (EVSE) testing.

STANDARDS Functionality: • EN 61557; DIN 5032 Other reference standards for testing: • IEC/EN/HD 60364-4-41; IEC/EN 61008; IEC/EN 61009; IEC 62572; EN 62955; BS 7671; AS/NZ 3017 Electromagnetic compatibility (EMC): • IEC/EN 61326-1 Safety: • IEC/EN 61010-1; IEC/EN 61010-031; IEC/EN 61010-2-030; IEC/EN 61010-2-032

TECHNICAL DATA

Test Current 7 mA 2-wire Test Current 200 mA 2-wire

INSULATION RESISTANCE

Test Voltage 50/100/250 V Test Voltage 500/1000 V

RCD

RCD Uc RCD (t), RCD I Ramp

IMPEDANCE

Zline L-L, L-N Ipsc

Zloop L-PE, Ipfc

VOLTAGE

TRMS Frequency

CURRENT

TRMS, AC with A 1018 TRMS, AC with A 1019 TRMS, AC/DC with A 1391, range = 40 A TRMS, AC/DC with A 1391, range = 300 A

EARTH RESISTANCE

3 wire 2 clamp Specific earth resistance

FIRST FAULT LEAKAGE CURRENT IMD TEST ILLUMINANCE

Threshold indicative insulation resistance Type B

Type C

GENERAL

Power supply Overvoltage category Protection class COM port Display Weight Dimensions

STANDARD SET MI 3152 ST • Instrument MI 3152 EurotestXC • Plug commander, 1.5 m • Test lead, 3 x 1.5 m • Power supply adapter + 6 NiMH rechargeable batteries, type AA • Test probe, 3 pcs (blue, black, green) • Crocodile clip, 3 pcs (blue, black, green) • Earth set 20 m • RS232 - PS/2 cable • USB cable • Soft carrying bag

Measuring range 0.00 Ω ... 19.99 Ω 20.0 Ω ... 1999 Ω 0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 1999 Ω 0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ 0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 199.9 MΩ 200 MΩ ... 999 MΩ 0.00 V ... 19.99 V 20.0 V ... 99.9 V 0.00 ms ... 40.0 ms 0.0 V ... max. time 0.2xI∆N ... 1.1xI∆N (AC) 0.2xI∆N ... 1.5xI∆N (A), I∆N ≥30 mA) 0.2xI∆N ... 2.2xI∆N (A), I∆N <30 mA) 0.2xI∆N ... 2.2xI∆N (B) 0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ ... 9.99 kΩ 0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ ... 9.99 kΩ 0 … 550 V 0.00 Hz .. 9.99 Hz 10.0 Hz ... 499.9 Hz 0.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 19.99 A 0.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 19.99 A 0.00 A ... 1.99 A 2.00 A ... 19.99 A 20.0 A ... 39.9 A 0.00 A ... 19.99 A 20.0 A ... 39.9 A 40.0 A ... 299.9 A 0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 9999 Ω 0.00 Ω ... 19.99 Ω 20.0 Ω ... 30.0 Ω 30.1 Ω ... 39.9 Ω 0.0 Ωm … 99.9 Ωm 100 Ωm ... 999 Ωm 1.00 kΩm ... 9.99 kΩm 10.0 kΩm ... 99.9 kΩm 100 kΩm ... 9999 kΩm 0.0 mA ... 19.9 mA

Resolution 0.1 Ω 1Ω 0.01 Ω 0.1 Ω 1Ω 0.01 MΩ

5 … 640 kΩ

0.1 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ 0.1 V 0.1 ms 0.05xI∆N

Accuracy ±(5 % of r. + 3 digits) ±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.) ±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) (-0 % /+15 %) of r. ± 10 digits (-0 % /+15 %) of r. ±1 ms ±3 ms ±0.1xI∆N

0.01 Ω 0.1 Ω 1Ω 10 Ω 0.01 Ω 0.1 Ω 1Ω 10 Ω 1V 0.01 Hz 0.1 Hz 0.1 mA 1 mA 0.01 A 0.1 mA 1 mA 0.01 A 0.01 A 0.01 A 0.1 A 0.01 A 0.1 A 0.1 A 0.01 Ω 0.1 Ω 1Ω 0.01 Ω 0.1 Ω 0.1 Ω 0.1 Ωm 1 Ωm 0.01 kΩm 0.1 kΩm

±(5 % of r. + 5 digits)

0.1 mA

±(5 % of r. + 3 digits)

5 kΩ

Indicative values, up to 128 steps

0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux 9 VDC (6x1.5 V battery or accu, size AA) 600 V CAT III; 300 V CAT IV double insulation BT, USB, RS232 Colour TFT display, 4.3 inch, 480 x 272 pixels 1.3 kg 230 x 103 x 115 mm

±(10 % of r.) ±(5 % of r. + 5 digits) ±(10 % of r.) ±(2 % of r. + 2 digits) ±(0.2 % of r. + 1 digits) ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(3 % of r.) Indicative ±(5 % of r.) ±(3 % of r.) ±(3 % of r. + 3 digits) ±(3 % of r.) ±(3 % of r.) Indicative ±(3 % of r. + 5 digits) ±(5 % of r. + 5 digits) ±(10 % of r. + 10 digits) ±(20 % of r.) ±(30 % of r.) ±(5 % of r.) for Re 1 Ω … 1999kΩ ±(10 % of r.) for Re 2 kΩ … 19.99kΩ ±(20 % of r.) for Re > 20 kΩ

±(5 % of r. + 2 digits) ±(5 % of r.) ±(10 % of r. + 3 digits) ±(10 % of r.)

• Soft carrying neck belt • Metrel ES Manager BASIC Licence* • Short instruction manual MI 3152 EU • MI 3152 ST • Current clamp A 1018 (low range, leakage) • Current clamp A 1019 • Metrel ES Manager PRO Licence*

Picture of MI 3152 EU set

FUNCTION CONTINUITY

*Metrel ES Manager can be downloaded free of charge from Metrel Web server.

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 13

Electrical Installation Safety

Multifunctional installation testers MI 3152H EurotestXC 2,5 kV MI 3152H EurotestXC 2,5 kV is an instrument from the new generation of Metrel’s multifunctional measuring instruments. The already well known functions like complete installation safety testing according to IEC/EN 61557 and AUTO SEQUENCE testing of TN and TT earthing systems expanded with insulation resistance measurement with the test voltage up to 2,5 kV are managed by a completely new user interface based on large colour touch screen display. A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, varistor testing, earth resistance measurement with 3 wire and 2 clamps method and illuminance measurement, TRMS current measurement up to RCD tests, line and loop impedance tests as well as diagnostic test enabled by PI and DAR indexes calculation.

MEASURING FUNCTIONS • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Line/Loop impedance combined also in one function Z AUTO; • Loop impedance with Trip Lock (EV) RCD function; • TRMS voltage and frequency measurements; • Phase sequence; • Power and THD measurement (up to the 12th harmonic); • RCD testing (general and selective, type AC, A, F, MI RCD, EV RCD, EV RCM, PRCD, PRCD-K, PRCD-S); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • Illumination (option); • High resolution Loop impendance (mΩ) (option); • EVSE AUTO SEQUENCEs and function inspections; 1. 14

• Determining location of cables (option); • QR and/or barcode scanner support (option).

KEY FEATURES • Predefined profile dependent AUTO SEQUENCEs. • Predefined Automatic tests: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe). • High resolution colour touch screen, 4.3” TFT • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • Monitoring of all 3 voltages in real-time. • Automatic polarity reversal on continuity test. • Automated RCD testing procedure. • Automated Impedance testing procedure (Z AUTO). • Functional inspections. • Measurement filtering according to the selected area group. • Built-in charger and rechargeable batteries as standard accessory. • BT communication with PC, Android tablets and smart phones via built-in BT. Accessories 1.61

• PC SW Metrel ES Manager (structure and report creation, data upload/download). • Optional aMESM Android app (structure and report creation, data upload/ download).

APPLICATION • Testing of TT and TN supply systems; • Testing of single and multiphase systems; • Initial and periodic testing of domestic and industrial installations; • Lightning installations; • Observation of insulation trends; • Electrical Vehicle Supply Equipment (EVSE) testing.

TECHNICAL DATA

Test Current 7 mA 2-wire Test Current 200 mA 2-wire

INSULATION RESISTANCE

Test Voltage 50/100/250 V Test Voltage 500/1000 V Test Voltage 2500 V

INSULATION ANALAYSING RCD

Calculation of PI, DAR Only for test voltage 500/1000/2500 V RCD Uc RCD (t), RCD I Ramp

IMPEDANCE

Zline L-L, L-N Ipsc

Zloop L-PE, Ipfc

VOLTAGE

TRMS Frequency

CURRENT

TRMS, AC with A 1018 TRMS, AC with A 1019 TRMS, AC/DC with A 1391, range=40 A TRMS, AC/DC with A 1391, range = 300 A

EARTH RESISTANCE

3 wire 2 clamp Specific earth resistance

ILLUMINANCE

Type B

Type C

GENERAL

Power supply Overvoltage category Protection class COM port Display Weight Dimensions

STANDARD SET MI 3152H • Instrument MI 3152H EurotestXC • Plug commander, 1.5 m • 2.5 kV test lead, 2 x 1.5 m • Test lead, 3 x 1.5 m • Power supply adapter + 6 NiMH rechargeable batteries, type AA • Test probe, 4 pcs (blue, black, green, red) • Crocodile clip, 4 pcs (blue, black, green, red) • Earth set 20 m • RS232 - PS/2 cable

Measuring range Resolution 0.00 Ω ... 19.99 Ω 0.1 Ω 20.0 Ω ... 1999 Ω 1Ω 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 1999 Ω 1Ω 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ 0.1 MΩ 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 199.9 MΩ 0.1 MΩ 200 MΩ ... 999 MΩ 1 MΩ 0.00 MΩ... 19.99 MΩ 0.01 MΩ 20.0 MΩ... 199.9 MΩ 0.1 MΩ 200 MΩ... 999 MΩ 1 MΩ 1.00 GΩ... 19.99 GΩ 0.01 GΩ 0.01 MΩ... 9.99 MΩ 0.01 MΩ 10.0 MΩ... 100 MΩ 0.1 MΩ 0.00 V ... 19.99 V 0.1 V 20.0 V ... 99.9 V 0.00 ms ... 40.0 ms 0.1 ms 0.0 V ... max.time 0.2xI∆N ... 1.1xI∆N (AC) 0.2xI∆N ... 1.5xI∆N (A), I∆N ≥30 mA) 0.05xI∆N 0.2xI∆N ... 2.2xI∆N (A), I∆N <30 mA) 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω 0 … 550 V 1V 0.00 Hz .. 9.99 Hz 0.01 Hz 10.0 Hz ... 499.9 Hz 0.1 Hz 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A 0.00 A ... 1.99 A 0.01 A 2.00 A ... 19.99 A 0.01 A 20.0 A ... 39.9 A 0.1 A 0.00 A ... 19.99 A 0.01 A 20.0 A ... 39.9 A 0.1 A 40.0 A ... 299.9 A 0.1 A 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 9999 Ω 1Ω 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 30.0 Ω 0.1 Ω 30.1 Ω ... 39.9 Ω 0.1 Ω 0.0 Ωm … 99.9 Ωm 0.1 Ωm 100 Ωm ... 999 Ωm 1 Ωm 1.00 kΩm ... 9.99 kΩm 0.01 kΩm 10.0 kΩm ... 99.9 kΩm 0.1 kΩm 100 kΩm ... 9999 kΩm 1 kΩm 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux 9 VDC (6x1.5 V battery or accu, size AA) 1000 V DC CAT II; 600 V CAT III; 300 V CAT IV double insulation BT, USB, RS232 Colour TFT display, 4.3 inch, 480 x 272 pixels 1.3 kg 230 x 103 x 115 mm

• • • • •

Accuracy ±(5 % of r. + 3 digits) ±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.) ±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) ±(10 % of r.) ±(5 % of r. + 2 digits) ±(5 % of r.) (-0 % /+15 %) of r. ± 10 digits (-0 % /+15 %) of r. ±1 ms ±3 ms ±0.1xI∆N ±(5 % of r. + 5 digits) ±(10 % of r.) ±(5 % of r. + 5 digits) ±(10 % of r.) ±(2 % of r. + 2 digits) ±(0.2 % of r. + 1 digits) ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(3 % of r.) Indicative ±(5 % of r.) ±(3 % of r.) ±(3 % of r. + 3 digits) ±(3 % of r.) ±(3 % of r.) Indicative Indicative ±(3 % of r. + 5 digits) ±(5 % of r. + 5 digits) ±(10 % of r. + 10 digits) ±(20 % of r.) ±(30 % of r.) ±(5 % of r.) for Re 1 Ω … 1999kΩ ±(10 % of r.) for Re 2 kΩ … 19.99kΩ ±(20 % of r.) for Re > 20 kΩ ±(5 % of r. + 2 digits) ±(5 % of r.) ±(10 % of r. + 3 digits) ±(10 % of r.)

USB cable Soft carrying bag Soft carrying neck belt Metrel ES Manager BASIC Licence* Short instruction manual

*Metrel ES Manager can be downloaded free of charge from Metrel Web server.

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3152H set

FUNCTION CONTINUITY

1. 15

Electrical Installation Safety

Multifunctional installation testers MI 3102 BT EurotestXE MI 3102 BT EurotestXE is a multifunctional measuring instrument which performs a complete set of installation safety tests according to IEC/EN 61557. It supports AUTO SEQUENCE ® testing of the TN, TT and IT earthing systems. ISFL measurements and the IMD tests can be performed. Besides, the MI 3102 BT EurotestXE enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Insulation resistance with DC voltage from 50 V to 1000 V; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Line/Loop impedance; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency; • Phase sequence; • Power and harmonics; • RCD testing (general and selective, type AC, A, F, B, B+); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • First fault leakage current (ISFL); • Testing of Insulation Monitoring Devices (IMDs); • Illumination (option).

• Predefined mini AUTO SEQUENCE ® s: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe); Auto IT (U, Zln, Isc, Isfl, IMD). • Power measurements and harmonics analysis. • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • On-line voltage monitoring: monitors all 3 voltages in real-time. • Polarity swap: automatic polarity reversal on continuity test. • Trip Lock function: loop impedance test without tripping the RCD. • Built-in charger unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • RCD auto: automated RCD testing procedure. • Bluetooth communication with PC, Android tablets and smart phones via built-in BT. • PC SW EuroLink PRO for downloading of test results and report creation. • EuroLink Android app, data management tool (option).

• Initial and periodic testing of domestic and industrial installations. • Testing of single and multiphase systems. • Testing of TT, TN and IT earthing systems. • Medical installation testing.

1. 16

Accessories 1.61

STANDARDS Functionality: • EN 61557; • DIN 5032 Other reference standards for testing: • IEC/EN 60364-4-41; • EN 61008; • EN 61009; • BS 7671; • AS/NZ 3017; • CEI 64.8; • HD 384; • VDE 413 Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-031; • EN 31010-2-030: • EN 31010-2-032

TECHNICAL DATA

INSULATION RESISTANCE

RCD

IMPEDANCE

VOLTAGE CURRENT

EARTH RESISTANCE

ILLUMINANCE

GENERAL

Measuring range Resolution 0.00 Ω ... 19.99 Ω 0.1 Ω 20.0 Ω ... 1999 Ω 1Ω Test Current 200 mA 2-wire 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 1999 Ω 1Ω Test Voltage 50/100/250 V 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ 0.1 MΩ Test Voltage 500/1000 V 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 0.1 MΩ 200 MΩ ... 999 MΩ 1 MΩ Contact voltage 0.00 V ... 19.99 V 0.1 V 20.0 V ... 99.9 V Trip out time 0.0 ms ... 40.0 ms 0.1 ms 0.0 ms ... max.time Trip out current 0.2xI∆N ... 1.1xI∆N (AC) 0.05xI∆N 0.2xI∆N ... 1.5xI∆N (A) I∆N ≥30 mA) 0.2xI∆N ... 2.2xI∆N (A) I∆N <30 mA) Zline L-L, L-N Ipsc 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω Zloop L-PE, Ipfc 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω TRMS 0 … 550 V 1V Frequency 0.00 Hz .. 9.99 Hz 0.01 Hz 10.0 Hz ... 499.9 Hz 0.1 Hz TRMS, AC with A 1018 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A TRMS, AC with A 1019 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A TRMS, AC/DC with A 1391, range=40A 0.00 A ... 1.99 A 0.01 A 2.00 A ... 19.99 A 0.01 A 20.0 A ... 39.9 A 0.1 A TRMS, AC/DC with A 1391, range = 0.00 A ... 19.99 A 0.01 A 300A 20.0 A ... 39.9 A 0.1 A 40.0 A ... 299.9 A 0.1 A 3 wire 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 9999 Ω 1Ω 2 clamp 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 30.0 Ω 0.1 Ω 30.1 Ω ... 99.9 Ω 0.1 Ω Specific earth resistance 0.0 Ωm … 99.9 Ωm 0.1 Ωm 100 Ωm ... 999 Ωm 1 Ωm 1.00 Ωmk ... 9.99 kΩm 0.01 kΩm 10.0 Ωmk ... 99.9 kΩm 0.1 kΩm Type B 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux Type C 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux Power supply 9 VDC (6x1.5 V battery or accu, size AA) Overvoltage category CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V Protection class Double insulation COM port BT, USB, RS232 Weight 1.3 kg Dimensions 230 x 103 x 115 mm Test Current 7 mA 2-wire

STANDARD SET MI 3102 BT • Instrument EurotestXE • Plug commander, 1.5 m • Test lead, 3 x 1.5 m • Earth test set, 3-wire, 20 m (test lead, 4 m; 2 x test lead, 20 m; 2 x test rod) • Power supply adapter + 6 NiMH rechargeable batteries, size AA • PC Software EuroLink PRO • Test probe, 3 pcs (blue, black, green)

• • • • • • • • •

Accuracy ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.) ±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) (-0%/±15 %) of r. ± 10 digits (-0%/±15 %) of r. ±1 ms ±3 ms ±0.1xI∆N ±(5 % of r. + 5 digits) ±(10 % of r.) ±(5 % of r. + 5 digits) ±(10 % of r.) ±(2 % of r. + 2 digits) ±(0.2 % of r. + 1 digits) ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(3 % of r.) indicative ±(5 % of r.) ±(3 % of r.) ±(3 % of r. + 3 digits) ±(3 % of r.) ±(3 % of r.) indicative ±(3 % of r. + 5 digits) ±(5 % of r. + 5 digits) ±(10 % of r. + 10 digits) ±(20 % of r.) ±(30 % of r.) ±(5 % of r.) for Re 1 Ω … 1999kΩ ±(10 % of r.) for Re 2 kΩ … 19.99kΩ ±(20 % of r.) for Re > 20 kΩ ±(5 % of r. + 2 digits) ±(5 % of r.) ±(10 % of r. + 3 digits) ±(10 % of r.)

Crocodile clip, 3 pcs (blue, black, green) RS232 - PS/2 cable USB cable Soft carrying neck belt Soft carrying bag Short instruction manual Instruction manual on storage media Handbook on storage media Calibration certificate

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3102 BT set

FUNCTION CONTINUITY

1. 17

Electrical Installation Safety

Multifunctional installation testers MI 3102H BT EurotestXE 2,5 kV MI 3102H BT EurotestXE 2,5 kV is a multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2,5 kV (measuring range is up to 20 GΩ) and enables diagnostic test by PI and DAR indexes calculation. Besides, the MI 3102H BT EurotestXE 2,5 kV enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE 2,5 kV is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

• Predefined mini AUTO SEQUENCE ® s: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe).

• Insulation range: wide range of insulation test voltages from 100 V to 2500 V, readings up to 20 GΩ. • Insulation diagnostics: polarisation Index (PI) and Dielectric Absorption Ratio (DAR) calculation. • Power measurements and harmonics analysis. • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • On-line voltage monitoring: monitors all 3 voltages in real-time. • Polarity swap: automatic polarity reversal on continuity test. • Trip Lock function: loop impedance test without tripping the RCD. • Built-in charger & rechargeable batteries: unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • RCD auto: automated RCD testing procedure. • Bluetooth communication with PC, Android tablets and smart phones via built-in BT. • PC SW EuroLink PRO for downloading of test results and report creation. • EuroLink Android app, data management tool (option).

1. 18

Accessories 1.61

MEASURING FUNCTIONS • Insulation resistance with DC voltage 50 V to 2,5 kV and PI, DAR calculation; • Continuity of PE conductors with 200 mA DC test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Continuity RPE with 200 mA AC on outlet; • Line/Loop impedance; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency; • Phase sequence; • Power and harmonics; • RCD testing (general and selective, type AC, A, F); • Earth resistance (3-wire and 2-clamps method); • Specific earth resistance with Ro-adapter (option); • TRMS leakage and load currents (option); • Illumination (option).

KEY FEATURES

APPLICATION • Initial and periodic testing of domestic and industrial installations. • Testing of Insulation resistance of transformers, motors, cables, machines, etc. • Observation of insulation trends. • Testing of single and multiphase systems. • Testing of TT and TN supply systems.

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN 60364; • EN 61008; • EN 61009; • EN 60755; • BS 7671; • AS/NZ 3760; • CEI 64.8; • HD 384; • VDE 413 Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-031; • EN 31010-2-030; • EN 31010-2-032

TECHNICAL DATA

INSULATION RESISTANCE

INSULATION ANALAYSING RCD

IMPEDANCE

VOLTAGE CURRENT

EARTH RESISTANCE

ILLUMINANCE

GENERAL

Measuring range Resolution 0.00 Ω ... 19.99 Ω 0.1 Ω 20.0 Ω ... 1999 Ω 1Ω Test Current 200 mA 2-wire 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 1999 Ω 1Ω Test Voltage 50/100/250 V 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ 0.1 MΩ Test Voltage 500/1000 V 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 0.1 MΩ 200 MΩ ... 999 MΩ 1 MΩ Test Voltage 2500 V 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 199.9 MΩ 0.1 MΩ 200 MΩ ... 999 MΩ 0.1 MΩ 1.00 GΩ ... 19.99 GΩ 0.01 GΩ Calculation of PI, DAR Only for test 0.01 MΩ ... 9.99 MΩ 0.01 MΩ voltage 500/1000/2500 V 10.0 MΩ ... 100 MΩ 0.1 MΩ Contact voltage 0.00 V ... 19.99 V 0.1 V 20.0 V ... 99.9 V Trip out time 0.0 ms ... 40.0 ms 0.1 ms 0.0 ms ... max.time Trip out current 0.2xI∆N ... 1.1xI∆N (AC) 0.05xI∆N 0.2xI∆N ... 1.5xI∆N (A) I∆N ≥30 mA) 0.2xI∆N ... 2.2xI∆N (A) I∆N <30 mA) Zline L-L, L-N Ipsc 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω Zloop L-PE, Ipfc 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω TRMS 0 … 550 V 1V Frequency 0.00 Hz .. 9.99 Hz 0.01 Hz 10.0 Hz ... 499.9 Hz 0.1 Hz TRMS, AC with A 1018 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A TRMS, AC with A 1019 0.0 mA ... 99.9 mA 0.1 mA 100 mA ... 999 mA 1 mA 1.00 A ... 19.99 A 0.01 A TRMS, AC/DC with A 1391, range=40A 0.00 A ... 1.99 A 0.01 A 2.00 A ... 19.99 A 0.01 A 20.0 A ... 39.9 A 0.1 A TRMS, AC/DC with A 1391, range = 0.00 A ... 19.99 A 0.01 A 300A 20.0 A ... 39.9 A 0.1 A 40.0 A ... 299.9 A 0.1 A 3 wire 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 9999 Ω 1Ω 2 clamp 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 30.0 Ω 0.1 Ω 30.1 Ω ... 99.9 Ω 0.1 Ω Specific earth resistance 0.0 Ωm … 99.9 Ωm 0.1 Ωm 100 Ωm ... 999 Ωm 1 Ωm 1.00 Ωmk ... 9.99 kΩm 0.01 kΩm 10.0 Ωmk ... 99.9 kΩm 0.1 kΩm Type B 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux Type C 0.01 lux ... 19.99 lux 0.01 lux 20.0 lux ... 199.9 lux 0.1 lux 200 lux ... 1999 lux 1 lux 2.00 klux ... 19.99 klux 10 lux Power supply 9 VDC (6x1.5 V battery or accu, size AA) Overvoltage category CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V Protection class Double insulation COM port BT, USB, RS232 Weight 1.3 kg Dimensions 230 x 103 x 115 mm Test Current 7 mA 2-wire

STANDARD SET MI 3102H BT • Instrument EurotestXE 2,5 kV • Plug commander, 1.5 m • 2.5 kV test lead, 2 x 1.5 m • Test lead, 3 x 1.5 m • Earth test set, 3-wire, 20 m (test lead, 4 m; 2 x test lead, 20 m; 2 x test rod) • Power supply adapter + 6 NiMH rechargeable batteries, size AA • PC Software EuroLink PRO

• • • • • • • • • •

Accuracy ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.) ±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) ±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.) ±(10 % of r.) ±(5 % of r. + 2 digits) ±(5 % of r.) (-0%/±15 %) of r. ± 10 digits (-0%/±15 %) of r. ±1 ms ±3 ms ±0.1xI∆N ±(5 % of r. + 5 digits) ±(10 % of r.) ±(5 % of r. + 5 digits) ±(10 % of r.) ±(2 % of r. + 2 digits) ±(0.2 % of r. + 1 digits) ±(5 % of r. + 5 digits) ±(3 % of r. + 3 digits) ±(3 % of r.) indicative ±(5 % of r.) ±(3 % of r.) ±(3 % of r. + 3 digits) ±(3 % of r.) ±(3 % of r.) indicative ±(3 % of r. + 5 digits) ±(5 % of r. + 5 digits) ±(10 % of r. + 10 digits) ±(20 % of r.) ±(30 % of r.) ±(5 % of r.) for Re 1 Ω … 1999kΩ ±(10 % of r.) for Re 2 kΩ … 19.99kΩ ±(20 % of r.) for Re > 20 kΩ ±(5 % of r. + 2 digits) ±(5 % of r.) ±(10 % of r. + 3 digits) ±(10 % of r.)

Test probe, 4 pcs (blue, black, green, red) Crocodile clip, 4 pcs (blue, black, green, red) RS232 - PS/2 cable USB cable Soft carrying neck belt Soft carrying bag Short instruction manual Instruction manual on storage media Handbook on storage media Calibration certificate

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3102H BT set

FUNCTION CONTINUITY

1. 19

Electrical Installation Safety

Multifunctional installation testers MI 3100 SE EurotestEASI MI 3100 SE EurotestEASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a complete set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 SE EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing. READY

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Insulation resistance with DC voltage from 50 V to 1000 V; • Continuity of PE conductors with 200 mA test current with polarity change; • Continuity of PE conductors with 7 mA test current without RCD tripping; • Line impedance; • Loop impedance; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency; • Phase sequence; • RCD testing (general and selective, type AC, A, F); • Earth resistance (3-wire method).

• Predefined mini AUTO SEQUENCE ® s: Auto TT (U, Zln, Zs, Uc); Auto TN/RCD (U, Zln, Zs, Rpe); Auto TN (U, Zln, Zlpe, Rpe). • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • On-line voltage monitoring: monitors all 3 voltages in real-time. • Polarity swap: automatic polarity reversal on continuity test. • Trip Lock function: loop impedance test without tripping the RCD. • Built-in charger unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • RCD auto: automated RCD testing procedure. • Bluetooth communication with PC, Android tablets and smart phones via optional BT dongle. • PC SW EuroLink PRO for downloading of test results and report creation. • EuroLink Android app, data management tool (option).

• Initial and periodic testing of domestic and industrial installations. • Testing of single and multiphase systems. • Testing of TT and TN supply systems.

1. 20

Accessories 1.61

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN 60364-4-41; • EN 61008; • EN 61009; • BS 7671; • AS/NZ 3017 Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-031; • EN 31010-2-030; • EN 31010-2-032

TECHNICAL DATA

CONTINUITY

INSULATION RESISTANCE

RCD

Measuring range

Resolution

Accuracy

Test Current 7 mA 2-wire

0.00 Ω ... 19.99 Ω 20.0 Ω ... 1999 Ω

0.1 Ω 1Ω

±(5 % of r. + 5 digits)

Test Current 200 mA 2-wire

0.00 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200.0 Ω ... 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(3 % of r. + 3 digits) ±(5 % of r.) ±(5 % of r.)

Test Voltage 50/100/250 V

0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 99.9 MΩ 100.0 MΩ ... 199.9 MΩ

0.01 MΩ 0.1 MΩ

±(5 % of r. + 3 digits) ±(10 % of r.) ±(20 % of r.)

Test Voltage 500/1000 V

0.00 MΩ ... 19.99 MΩ 20.0 MΩ ... 99.9 MΩ 200 MΩ ... 999 MΩ

0.01 MΩ 0.1 MΩ 1 MΩ

±(5 % of r. + 3 digits) ±(5 % of r.) ±(10 % of r.)

Contact voltage

0.00 V ... 19.99 V 0.1 V 20.0 V ... 99.9 V 0.0 ms ... 40.0 ms 0.1 ms 0.0 ms ... max.time 0.2xI∆N ... 1.1xI∆N (AC) 0.05xI∆N 0.2xI∆N ... 1.5xI∆N (A) I∆N ≥30 mA) 0.2xI∆N ... 2.2xI∆N (A) I∆N <30 mA) 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω 0.00 Ω ... 9.99 Ω 0.01 Ω 10.0 Ω ... 99.9 Ω 0.1 Ω 100 Ω ... 999 Ω 1Ω 1.00 kΩ ... 9.99 kΩ 10 Ω 0 … 550 V 1V 0.00 Hz .. 9.99 Hz 0.01 Hz 10.0 Hz ... 499.9 Hz 0.1 Hz 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 199.9 Ω 0.1 Ω 200.0 Ω ... 9999 Ω 1Ω 9 VDC (6x1.5 V battery or accu, size AA) CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V Double insulation BT, USB, RS232 1.3 kg 230 x 103 x 115 mm

Trip out time Trip out current

IMPEDANCE

Zline L-L, L-N Ipsc

Zloop L-PE, Ipfc

VOLTAGE

TRMS Frequency

EARTH RESISTANCE

3 wire

GENERAL

Power supply Overvoltage category Protection class COM port Weight Dimensions

STANDARD SET MI 3100 SE • Instrument EurotestEASI • Schuko-plug test cable, 1.5 m • Test lead, 3 x 1.5 m • Test probe, 3 pcs (blue, black, green) • Crocodile clip, 3 pcs (blue, black, green) • Power supply adapter + 6 NiMH rechargeable batteries, size AA • RS232 - PS/2 cable • USB cable

• • • • • • •

(-0%/±15 %) of r. ± 10 digits (-0%/±15 %) of r. ±1 ms ±3 ms ±0.1xI∆N

±(5 % of r. + 5 digits) ±(10 % of r.) ±(5 % of r. + 5 digits) ±(10 % of r.) ±(2 % of r. + 2 digits) ±(0.2 % of r. + 1 digits) ±(5 % of r. + 5 digits)

Soft carrying neck belt Soft carrying bag PC Software EuroLink PRO Short instruction manual Instruction manual on storage media Handbook on storage media Calibration certificate

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3100 SE set

FUNCTION

1. 21

Electrical Installation Safety

Multifunctional installation testers MI 3125BT EurotestCOMBO The MI 3125BT EurotestCOMBO performs all the necessary tests for installation safety testing on TT and TN systems. The large graphic display with backlight offers easy reading of results, indications, measurement parameters and messages. Two LED Pass/Fail indicators are placed on both sides of the LCD. MI 3125BT EurotestCOMBO contains integrated characteristics of fuses and RCDs (including B type) for the evaluation of test results. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software, included in the standard set, to the computer for evaluation and report generation after testing. MI 3125BT EurotestCOMBO performs continuity, insulation, RCD, loop, line, voltage, frequency, earth resistance testing and phase sequence tests required by the EN 61557 standard.

MEASURING FUNCTIONS • Insulation resistance with DC voltage; • Continuity of PE conductors with 200 mA test current with polarity change; • Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping; • Line impedance; • Loop impedance; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency; • Phase sequence; • RCD testing (general and selective, type AC, A, F, B, B+ and EV RCD); • Earth resistance (3-wire method).

•

KEY FEATURES

•

• LED Pass/Fail indicators: two LED indicators for PASS / FAIL evaluation of test results are placed on both sides of the LCD • Help screens: instrument comes complete with built-in help screens for referencing on site. • Earth resistance measurement: instrument performs 3-wire earth resistance testing with two additional rods. • Built-in fuse tables: this unique feature allows automatic evaluation of the

1. 22

•

• • • •

line / loop impedance compared to the regulations. Online voltage monitoring: monitors all 3 voltages in real-time. Upgradeable: if changes occur to the regulations, upgrades can be made to the firmware to keep the instrument up to date. Polarity swap: automatic polarity reversal on continuity test. Insulation range: wide range of insulation test voltages from 50 V to 1000 V, reading up to 1000 MΩ. Trip Lock function: Zs (RCD) function performs a loop impedance test without tripping the (EV) RCD. Multi-system testing: tests on single and multiphase TT and TN systems. Built-in charger & rechargeable batteries: unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. RCD auto: automated RCD testing procedure significantly reduces test time. B type RCD and EV RCD testing are supported. BT connectivity: it enables BT communication with Android tablets and smart phones via built-in BT. PC SW Eurolink PRO included in the standard set enables downloading of test results and parameters and creation of test reports.

Accessories 1.61

APPLICATION • Initial and periodic testing of domestic and industrial installations; • Testing of single and multiphase systems; • Testing of TT and TN systems.

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • VDE 0413; • IEC/EN 61008; • IEC/EN 61009; • IEC/EN/HD 60364; • HD 384; BS 7671; • IEC/TR 60755; • CEI 64.8; • AS/NZ 3760; • AS/NZ 3018 Electromagnetic compatibility: • IEC/EN 61326-1; • IEC/EN 61326-2-2 Safety: • IEC/EN 61010-1; • IEC/EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Insulation resistance (EN 61557-2)

U = 50, 100, 250 VDC: R: 0.00 MΩ … 19.99 MΩ 20.0 MΩ … 99.9 MΩ 100.0 MΩ … 199.9 MΩ U = 500 VDC, 1 kVDC: R: 0.00 MΩ … 19.99 MΩ 20.0 MΩ … 99.9 MΩ 200 MΩ … 999 MΩ

Resolution

Accuracy

0.01 MΩ 0.1 MΩ 0.1 MΩ

±(5 % of reading + 3 digits) ±10 % of reading ±20 % of reading

0.01 MΩ 0.1 MΩ 1 MΩ

±(5 % of reading + 3 digits) ±5 % of reading ±10 % of reading

Continuity 200 mA of PE conductor with polarity change (EN 61557-4)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(3 % of reading + 3 digits) ±5 % of reading ±5 % of reading

Low resistance continuity measurement, test current 7 mA (Continuous measurement)

0.0 Ω … 19.9 Ω 20 Ω … 1999 Ω

0.1 Ω 1Ω

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Loop impedance (EN 61557-3)

0.00 Ω … 9.99 Ω 10.0 Ω … 99.9 Ω 100 Ω … 999 Ω 1.00 kΩ … 9.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±10 % of reading ±10 % of reading

Line impedance (EN 61557-3)

0.00 Ω … 9.99 Ω 10.0 Ω … 99.9 Ω 100 Ω … 999 Ω 1.00 kΩ … 9.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±10 % of reading ±10 % of reading

Voltage drop

0.0 % … 99.9 %

0.1 %

Consider accuracy of line impedance

Voltage

0 V … 550 V

±(2 % of reading + 2 digits)

Frequency

0.00 Hz … 9.99 Hz 10.0 Hz … 499.9 Hz

0.01 Hz 0.1 Hz

±(0.2 % of reading + 1 digits)

Phase sequence (EN 61557-7)

1.2.3 or 3.2.1

RCD testing (EN 61557-6)

I∆N: 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1 A

- Contact voltage UC

0.0 V … 19.9 V 20.0 V … 99.9 V

0.1 V 0.1 V

(-0 % / +15 %) of reading ±10 digits (-0 % / +15 %) of reading

- Trip-out time

0 ms … 40.0 ms 0 ms … max. time

0.1 ms 0.1 ms

±1 ms ±3 ms

- Trip-out current

0.2 x I∆N … 1.1 x I∆N (AC type) 0.2 x I∆N … 2.2 x I∆N (A, F types, I∆N < 30 mA) 0.2 x I∆N … 1.5 x I∆N (A, F types, I∆N ≥ 30 mA) 0.2 x I∆N … 2.2 x I∆N (B, B+ types) 0.2 x IΔN ... 1.0 x IΔN (EV RCD a.c. part) 0.2 x IΔN ... 1.0 x IΔN (EV RCD d.c. part)

0.05 x I∆N 0.05 x I∆N 0.05 x I∆N 0.05 x I∆N 0.05 x I∆N 0.05 x I∆N

±0.1 x I∆N ±0.1 x I∆N ±0.1 x I∆N ±0.1 x I∆N ±0.1 x I∆N ±0.1 x I∆N

Earth resistance (EN 61557-5)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 9999 Ω

0.01 Ω 0.1 Ω 1Ω

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits)

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

140 x 80 x 230 mm

Weight

1.0 kg

STANDARD SET

• • • •

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3125 BT set

MI 3125 BT • Instrument EurotestCOMBO • Set of carrying straps • Test lead, 3 x 1.5 m • Schuko-plug test cable, 1.5 m • Test probe, 3 pcs (blue, black, green) • Crocodile clip, 3 pcs (blue, black, green) • Power supply adapter + 6 NiMH rechargeable batteries, type AA • USB cable

RS232 - PS/2 cable PC SW EuroLink PRO Short instruction manual Instruction manual and handbook on storage media • Calibration certificate

1. 23

1. 24

Accessories 1.61

Photovoltaic and electrical installations tester Selection Guide for Photovoltaic and Electrical installations Testers FEATURES

Description

MI 3108 EurotestPV

MI 3109 EurotestPV Lite

ELECTRICAL INSTALLATION SAFETY

Insulation resistance up to 1000 V

•

Continuity 200 mA

•

Line / Loop Impedance

•

RCD A, AC, B

•

Earth resistance

•

Rotary field

•

Isc, Uoc

1000 V / 15 A

PV GENERATOR MEASUREMENTS

Automatic test sequence

1000 V / 15 A •

I-V curve

•

Umpp, Impp, Pmax

•

extrapolation to STC

•

•*

Rs (calculated in PC SW)

•

ENVIRONMENT MEASUREMENTS

Irradiance

•

•*

Module temperature

•

•*

PV SYSTEM POWER MEASURENMENTS

DC side measurements U, I, P

•

AC side measurements (single phase) U, I, P

•

PV and inverter energy conversion efficiency

•

P, Q, S, THDU, PF/cos fi

•

AC/DC current

•

Scope function

•

Energy

•

Harmonics (up to 11th)

•

Memory size

I-V curve: ca. 500 meas. Other: ca 1800 meas.

Supply

6 x AA

Built-in battery charger

•

Display

128 x 64 BW LCD

Overvoltage category

CAT II / 1000 V DC CAT III / 600 V CAT IV / 300 V

PC connectivity

•

PC Software

EuroLink PRO

Weight (kg)

1.3

Dimensions (mm)

230 x 103 x 115

EXTENDED POWER FUNCTIONALITY

GENERAL DATA

•

* Environment data can be entered manually or measured with optional accessory

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 25

Electrical Installation Safety

Photovoltaic and electrical installations tester MI 3108 EurotestPV MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values as required by EN 61829 and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time. READY

MEASURING FUNCTIONS Photovoltaic installations: • Measurements on DC side of PV installation: • Voltage, current, power; • Uoc (Open Circuit Voltage) and Isc (Short Circuit Current); • I - U curve of PV modules and strings; • Irradiance; • Module temperature. • Measurements on AC side of PV installation: • Voltage, current, power; • Efficiency of PV module, inverter, PV system calculation.

even if they were taken under different test conditions. • Graphical representation: the I-V characteristic of PV module or string is graphically represented on LCD display. • Power and efficiency measurements: 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements. • PV Remote Unit: Optional unit for simultaneous measurements of solar irradiation and temperature of PV module.

Photovoltaic installations: • Calculation of STC values: the measured current and voltage values are, according to environment conditions, recalculated to Standard Test Condition values which makes possible, to compare the results

Electrical installations • RCD Auto: Automated RCD testing procedure significantly reduces test time. • Trip Lock function: Loop impedance test are performed without tripping the RCD. • B type RCD testing: is supported. • Earth resistance measurement: instrument supports 3-wire earth resistance testing. • Built-in fuse tables: for automatic evaluation of the line / loop impedance results. • Online voltage monitoring: monitors all 3 voltages in real time. • Scope function: real-time U/I scope. • Harmonics analysis: 1-phase power and energy measurements with up to 11th harmonics analysis is supported. • Memory: Up to 1800 test results or up to 500 graphical results with timestamp can be stored in internal memory. • BT connectivity: it enables BT communication with Android tablets and

1. 26

Accessories 1.61

Electrical installations: • Insulation resistance; • Continuity of PE conductors; • Line impedance; • Loop impedance (sub-functions with high current and without RCD tripping); • RCD testing (type AC, A and B); • Earth resistance; • AC current (load and leakage); • TRMS voltage, frequency, phase sequence; • Power, energy, harmonics.

KEY FEATURES

smart phones via optional BT dongle. • Android application: enables advanced data management APP EuroLink PV and EuroLink Android. • PC SW EuroLink PRO enables downloading, uploading, review, analyses and printing of test results.

APPLICATION • Testing, evaluations and troubleshooting of photovoltaic installations. • Power and energy efficiency measurements (AC and DC). • Initial and periodic testing of domestic and industrial single and three-phase electrical installations.

STANDARDS Functionality: • IEC/EN 61557 series; • IEC 62446 (photovoltaics); • IEC 61829. Other reference standards for testing: • BS 7671; • EN 61008; • EN 61009; • EN 60364-4-41; • AS/NZ 3017 Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-2-030; • EN 61010-031; • EN 61010-2-032

TECHNICAL DATA PHOTOVOLTAIC INSTALLATION MEASUREMENTS Function

Measuring range

Basic accuracy

Voltage

0 VDC ... 999 VDC 0 VAC ... 999 VAC I-V m.: 0 VDC ... 999 VDC

±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits)

Current

Panel m.: 0.0 mA ... 300 ADC Invert. m.: 0.0 mA ... 300 AAC I-V m.: 0.00 A ... 15 ADC

±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits)

Power

Panel m.: 0 ... 999 kW I-V m.: 0 ... 14.99 kW

±(2.5 % of reading + 6 digits) ±(2 % of reading + 3 digits)

U / I curve

1000 V / 15 A / 15 kW

Irradiation

000 ... 1.75 kW/m2

±(4 % of reading + 5 digits)

Temperature

-10.0 °C ... + 85.0 °C

± 5 digits

Function

Measuring range

Basic accuracy

Insulation resistance (EN 61557-2)

U = 50, 100, 250 VDC: R: up to 199.9 MΩ U = 500 VDC, 1 kVDC: R: up to 999 MΩ

ELECTRICAL INSTALLATION MEASUREMENTS

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Continuity, 200 mA (EN 61557-4)

0.00 Ω ... 1999 Ω

±(3 % of reading + 3 digits)

Continuity, 7 mA

0.0 Ω ... 1999 Ω

±(5 % of reading + 3 digits)

Loop impedance (EN 61557-3)

0.00 Ω ... 9.99 kΩ

±(5 % of reading + 5 digits)

Line impedance (EN 61557-3)

0.00 Ω ... 9.99 kΩ

±(5 % of reading + 5 digits)

Voltage

0 VAC ... 550 VAC

±(2 % of reading + 2 digits)

Frequency

0.00 Hz ... 499.9 Hz

±(0.2 % of reading + 1 digits)

Phase sequence (EN 61557-7)

1.2.3 or 3.2.1

RCD testing (EN 61557-6)

I∆N: 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1 A

Contact voltage UC

0.0 V ... 99.9 V

(-0 % / +15 %) of reading

Trip-out time

0 ms ... 40 ms

±1 ms

Trip-out current

0.2 x I∆N ... 2.2 x I∆N

±0.1 x I∆N

Earth resistance (EN 61557-5)

0.00 Ω ... 9999 Ω

±(5 % of reading + 5 digits)

Energy

0.000 Wh - 1999 kWh

Harmonics

up to 11th

General

Main unit

Remote unit

Display

128 x 64 dots matrix display with backlight

Power supply

6 x 1.2 V NiMH batteries, type AA

Overvoltage category

CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V

Protection class

double insulation

COM port

RS232 and USB

RS232

Dimensions

230 x 103 x 115 mm

140 x 230 x 80 mm

Weight

1.3 kg

1.0 kg

STANDARD SET

• • • • • • •

Picture of MI 3108 PS set

MI 3108 ST • Instrument MI 3108 EurotestPV • Large carrying bag • Schuko-plug test cable • Test lead, 3 x 1.5 m • Test probe, 4 pcs (red, green, blue, black) • Crocodile clip, 3 pcs (red, green, blue, black) • PV Safety Probe • PV MC3/4 male/female adapters • AC/DC current clamp • PV Reference Cell

Temperature probe USB and RS232 - PS/2 cable Power supply adapter + 6 NiMH batteries, type AA PC SW EuroLink PRO Set of carrying straps Short instruction manual Instruction manual and handbook on storage media • Calibration certificate MI 3108 PS • MI 3108 ST • EurotestPV Remote • Tip commander • PC SW EuroLink PRO Plus licence

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 27

Electrical Installation Safety

Photovoltaic and electrical installations tester MI 3109 EurotestPV Lite MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic measurements, calculation of STC values as required by EN 61829 and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With this instrument the tests for the first inspection of PV systems as well as periodic maintenance tests, evaluation tests or troubleshooting tests are possible. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available. READY

MEASURING FUNCTIONS

• Insulation and I-U curve measurements in one instrument: with MI 3109 only one instrument is needed to perform insulation measurements with up to 1000V for proofing the PV installation safety and I-U curve measurements needed for evaluation and troubleshooting of PV modules or strings. • Autotest: This function is intended to perform a complete set of tests according to EN 62446 on PV modules or strings with pressing only one button: • insulation resistance between positive output and earth;

• insulation resistance between negative output and earth; • open circuit voltage; • short circuit current. • Calculation to STC values: the measured current and voltage values are, according to environment conditions, recalculated to Standard Test Condition values which makes possible to compare the results of different measurements even if they were taken under different test conditions. • Efficiency calculations: 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements. • PV Remote Unit: Optional unit for simultaneous measurements of solar irradiation and temperature of PV module. • Graphical representation of module’s I - U curve: the I-V characteristic of PV module or string is graphically represented on LCD display. • Memory: Up to 1800 test results or up to 500 graphical results with timestamp can be stored in internal memory. • BT connectivity: it enables BT communication with Android tablets and smart phones via optional BT dongle. • Android application: enables advanced data management APP EuroLink PV. • PC SW EuroLink PRO enables downloading, uploading, review, analyses and printing of test results.

1. 28

Accessories 1.61

Photovoltaic installations: • Measurements on DC side of PV installation: • Insulation resistance; • Continuity of PE conductors; • Uoc (Open Circuit Voltage) and Isc (Short Circuit Current); • I - U curve of PV modules and strings; • Voltage, current and power of strings and inverters; • Irradiance; • Module temperature. • Measurements on AC side of PV installation: • Voltage, current, power; • Efficiency of PV module, inverter, PV system calculation.

KEY FEATURES

APPLICATION • First inspection Testing. • Periodic maintenance tests. • Evaluation and troubleshooting of photovoltaic installations. • Power and efficiency measurements (AC and DC).

STANDARDS Functionality: • IEC/EN 61557 series; • IEC 62446 (photovoltaics); • IEC 61829. Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1; • EN 61010-2-030; • EN 61010-031; • EN 61010-2-032

TECHNICAL DATA PHOTOVOLTAIC INSTALLATION MEASUREMENTS Function

Measuring range

Basic accuracy

Voltage

±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits) ±(1 % of reading + 2 digits) ±(1.5 % of reading + 3 digits) ±(1 % of reading + 2 digits) ±(2.5 % of reading + 6 digits) ±(2 % of reading + 3 digits)

U / I curve

0 VDC ... 999 VDC 0 VAC ... 999 VAC I-V m.: 0 VDCC ... 999 VDC Panel m.: 0.0 mA ... 300 ADC Invert. m.: 0.0 mA ... 300 AAC I-V m.: 0.00 A ... 15 ADC Panel m.: 0 ... 199.9 kW I-V m.: 0 ... 14.99 kW 1000 V / 15 A / 15 kW

Irradiation

000 ... 1.75 kW/m2

±(4 % of reading + 5 digits)

Temperature

-10.0 °C ... + 85.0 °C

± 5 digits

Function

Measuring range

Basic accuracy

Insulation resistance (EN 61557-2)

Continuity, 200 mA (EN 61557-4)

U = 50, 100, 250 VDC: R: up to 199.9 MΩ U = 500 VDC, 1 kVDC: R: up to 999 MΩ 0.00 Ω ... 1999 Ω

Continuity, 7 mA

0.0 Ω ... 1999 Ω

±(5 % of reading + 3 digits)

General

Main unit

Remote unit

Display

128 x 64 dots matrix display with backlight

Power supply

6 x 1.2 V NiMH batteries, type AA

Overvoltage category

CAT II / 1000 VDC; CAT III / 600 V; CAT IV / 300 V

Protection class

double insulation

COM port

RS232 and USB

RS232

Dimensions

230 x 103 x 115 mm

140 x 230 x 80 mm

Weight

1.3 kg

1.0 kg

STANDARD SET

• Carrying strap • Short instruction manual • Instruction manual and handbook on storage media • Calibration certificate

Current

Power

ELECTRICAL INSTALLATION MEASUREMENTS

±(5 % of reading + 3 digits) ±(3 % of reading + 3 digits)

Picture of MI 3109 ST set

MI 3109 ST • Instrument MI 3109 EurotestPV Lite • Soft carrying bag • Universal PV test lead, 3 x 1.5 m • PV Continuity test lead, 2 x 1.5 m • Test probe, 3 pcs (red, blue, green) • Crocodile clip, 3 pcs (red, blue, green) • PV MC3/4 male/female adapters • AC/DC current clamp • Power supply adapter + 6 NiMH batteries, type AA • USB and RS232 - PS/2 cable • PC SW EuroLink PRO

±(5 % of reading + 3 digits)

MI 3109 PS • MI 3109 ST • EurotestPV Remote • PV Safety Probe • PV Reference Cell • Temperature probe • Soft carrying bag • PC SW EuroLink PRO Plus licence

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 29

Single-functional Testers Selection Guide for Single-functional Testers FEATURES

Description

MI 3121 Insulation / Continuity

INSULATION

Insulation resistance

•

Test voltage (VDC)

50 … 1000

Insulation resistance measuring range

up to 30 GΩ

CONTINUITY AND LOW RESISTANCE MEASUREMENT

Continuity of PE conductor with automatic polarity change, test current 200mA

•

Low resistance measurement (continuous measurement), test current 7 mA.

•

LINE / LOOP IMPEDANCE

Line impedance with Ipsc calculation

•

Loop impedance with Ipsc calculation

•

RCD Trip Lock loop impedance

•

Built-in fuse tables for PASS / FAIL evaluation

•

Contact voltage without RCD tripping

•

RCD trip-out time

•

RCD trip-out current with rising test current

•

Automatic testing of RCDs

•

RCD TESTING

RCD type (general and selective) VOLTAGE, FREQUENCY

AC voltage measurement

MI 3122 Z Line-Loop / RCD

AC / A •

Online voltage monitor

•

Frequency measurement

•

PHASE SEQUENCE

L1 - L2 - L3

EARTH, CURRENT MEASUREMENTS

Earth resistance 3-(4-)wire method

• •

Earth resistance 3-(4-)wire method with additional current clamp Earth resistance measurement with 2 current clamps Specific earth resistance TRMS current TRMS leakage / load current

IT EARTHING SYSTEM SPECIFIC MEASUREMENTS

Insulation Monitoring Devices (IMD) testing (IT systems)

OTHER FEATURES

Varistor test

First fault leakage current (ISFL) measurement (IT systems) Predefined mini Autosequences Nominal frequency range

15 Hz ... 500 Hz

PASS / FAIL evaluation of test results

•

Touch electrode

•

Help menu

•

COMMUNICATION PORTS

RS232

•

USB

•

MEMORY, SOFTWARE

Memory

•

Number of memory levels / memory locations

2 / 1500

3 / 1500

Professional PC SW

Option

Advanced PC SW

Option

Safety category

CAT III / 600 V CAT IV / 300 V

Batteries

6 x AA

Built-in battery charger

•

Weight

850 g

930 g

Dimensions (mm)

140 x 80 x 230

GENERAL DATA

1. 30

Accessories 1.61

MI 3123 Earth / Clamp

MI 3110 EurotestIM

MI 2088 Earth Insulation

• 50 … 1000 •

•

• • • •

•

Option

•

• (without ro adapter)

Option Option • • • 40 Hz ... 500 Hz

14 Hz ... 500 Hz

•

45 Hz ... 55 Hz

• •

•

Option

•

3 / 1500

3 / 500

2 / 1000

Option

•

Option

CAT IV / 50 V

CAT III / 600 V CAT IV / 300 V

CAT III / 300 V CAT II / 600 V

6 x AA

4 x CC

•

850 g

1.31

1.7

140 x 80 x 230

230 x 103 x 115

265 x 110 x 1185

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 31

Electrical Installation Safety

Single-functional testers MI 3121 SMARTEC Insulation / Continuity The MI 3121 SMARTEC Insulation / Continuity is a new generation tester for dead testing of electrical installations. With both an analogue and digital representation of the results, the instrument ensures accurate measurements up to 2000 Ω on continuity and up to 30 GΩ on insulation function. Configurable limits enable a PASS / FAIL evaluation of test results, which is accompanied with the bright red and green indicator lights for comfortable use even in the dark conditions. The MI 3121 is equipped with a built-in charger and has a magnetic holder in order to free up hands for testing. All the results can be quickly saved on the instrument and then downloaded via the optional A 1291 EuroLink PRO or A 1290 EuroLink PRO Plus software for evaluation and professional report generation after testing. The MI 3121 SMARTEC Insulation / Continuity performs continuity, insulation AC voltage and frequency measurement tests.

• Insulation range: wide range of insulation test voltages from 50 V to 1000 V, measuring range up to 30 GΩ. • Analogue scale and digital LCD: measuring results are displayed both in numeric and analogue representation. • Downloadable: downloads via RS232 or USB cable directly to the PC with the help of the optional software.

• Upgradeable: if changes occur to the regulations upgrades can be made to the firmware to keep the instrument up to date. • Polarity swap: automatic polarity reversal on continuity test. • Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • Custom limits: if limits are set on insulation or continuity function then large green and red lights of the LEDs will indicate a PASS or FAIL evaluation of test result. • Easy to use: large bright LCD display and large buttons enable easy handling of the instrument (even while wearing gloves). • Magnetic holder: magnet for fixing instrument on metal surfaces enables hands-free operation.

1. 32

Accessories 1.61

KEY FEATURES

APPLICATION • • • •

Domestic dead circuit testing; Industrial dead circuit testing; Telecommunication systems testing; Resistance measurements.

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN/HD 60364; • AS/NZ 3018; • CEI 64.8; • HD 384; • BS 7671; • VDE 0413 Electromagnetic compatibility: • IEC/EN 61326-1; • IEC/EN 61326-2-2 Safety: • IEC/EN 61010-1; • IEC/EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Insulation resistance (EN 61557-2)

U = 500, 1000 VDC: R: 0.00 MΩ … 19.99 MΩ 20.0 MΩ … 199.9 MΩ 200 MΩ … 999 MΩ 1.00 GΩ … 4.99 GΩ 5.00 GΩ … 19.99 GΩ 20.0 GΩ … 29.9 GΩ U = 50, 100, 250 VDC: R: 0.00 MΩ … 19,99 MΩ 20.0 MΩ … 99.9 MΩ 100.0 MΩ … 199.9 MΩ

Resolution

Accuracy

0.01MΩ 0.1MΩ 1 MΩ 10 MΩ 10 MΩ 100 MΩ

±(5 % of reading + 3 digits) ±5 % of reading ±5 % of reading ±10 % of reading ±20 % of reading Indicator only

0.01 MΩ 0.1 MΩ 0.1 MΩ

±(5 % of reading + 3 digits) ±10 % of reading ±20 % of reading

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(3 % of reading + 3 digits) ±5 % of reading ±10 % of reading

Low resistance measurement with 7 mA test current (continuous measurement)

0.0 Ω … 19.9 Ω 20 Ω … 1999 Ω

0.1 Ω 1Ω

±(5 % of reading + 3 digits) ±10 % of reading

Voltage

0.0 V … 99.9 V 100 V … 550 V

0.1 V 1V

±(3 % of reading + 3 digits)

Frequency

0.00 Hz … 19.99 Hz 20.0 Hz … 199.9 Hz 200 Hz … 500 Hz

0.01 Hz 0.1 Hz 1 Hz

±(0.2 % of reading + 1 digits)

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

140 x 230 x 80 mm

Weight

0.85 kg

STANDARD SET

• Short instruction manual • Handbook on storage media • Calibration certificate

MI 3121 • Instrument Smartec Insulation / Continuity • Soft hand strap • Test lead, 2 x 1.5 m • Test probe, 2 pcs (black, red) • Crocodile clip, 2 pcs (black, red) • Power supply adapter + 6 NiMH rechargeable batteries, type AA • Instruction manual on storage media

Measuring and Regulation Equipment Manufacturer

Picture of MI 3121 set

Continuity 200 mA of PE conductor with polarity change (EN 61557-4)

Accessories 1.61

1. 33

Electrical Installation Safety

Single-functional testers MI 3122 SMARTEC Z Line-Loop / RCD The MI 3122 SMARTEC Z Line-Loop / RCD is designed specifically for live circuit testing. The instrument contains integrated characteristics of fuses and RCDs for the evaluation of test results. The online voltage monitoring system allows the operator to control what is happening on three simultaneous voltages in real-time. The bright red and green PASS / FAIL lights and help screens for each measurement make the handling of the instrument easy and clear. All the results can be quickly saved on the instrument and then downloaded via the optional A 1291 EuroLink PRO or A 1290 EuroLink PRO Plus software for evaluation and professional report generation after testing. The MI 3122 SMARTEC Z Line-Loop / RCD performs RCD, loop, line, AC voltage, frequency and phase sequence tests required by the EN 61557 standard.

• Help screens: instrument comes complete with built-in help screens for referencing on site. • LED Pass/Fail indicators: two LED indicators for PASS / FAIL evaluation of test results are placed on both sides of the LCD. • Built-in fuse tables: this unique feature allows automatic evaluation of the line / loop impedance compared to the regulations.

• Online voltage monitoring: monitors all 3 voltages in real-time. • Downloadable: downloads via RS232 or USB cable directly to the PC with the help of the optional software. • Upgradeable: if changes occur to the regulations upgrades can be made to the firmware to keep the instrument up to date. • Trip Lock function: Zs (RCD) function performs a loop impedance test without tripping the RCD. • Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • RCD auto: automated RCD testing procedure significantly reduces test time. • Easy to use: large bright LCD display and large buttons enable easy handling of the instrument (even while wearing gloves). • Magnetic holder: magnet for fixing instrument on metal surfaces enables hands-free operation.

1. 34

Accessories 1.61

MEASURING FUNCTIONS • Line impedance; • Loop impedance; • Loop impedance with Trip Lock RCD function; • TRMS voltage and frequency; • Phase sequence; • RCD testing (general and selective, type AC and A).

KEY FEATURES

APPLICATION • Domestic and Industrial live circuit testing; • Testing of single phase and 3-phase, TT and TN systems.

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN/HD 60364; • IEC/EN 61008; • IEC/EN 61009; • IEC/EN/TR 60755; • AS/NZ 3760; • AS/NZ 3018; • CEI 64.8; • HD 384; • BS 7671; • VDE 0413 Electromagnetic compatibility: • IEC/EN 61326-1; • IEC/EN 61326-2-2 Safety: • IEC/EN 61010-1; • IEC/EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

RCD testing (EN 61557-6)

I∆N: 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1 A

- Scaling factor for I∆N

x 0.5; x 1; x 2; x 5

- Contact voltage UC

0.0 V … 19.9 V 20.0 V … 99.9 V

0.1 V 0.1 V

(-0%/+15%) of reading ± 10 digits (-0%/+15%) of reading

- Trip-out current

(0.2 … 1.1) x I∆N (AC type) (0.2 … 1.5) x I∆N (A type, I∆N ≥ 30 mA) (0.2 … 2.2) x I∆N (A type, I∆N < 30 mA)

0.05 x I∆N 0.05 x I∆N 0.05 x I∆N

± 0.1x I∆N ± 0.1x I∆N ± 0.1x I∆N

- Trip-out time

0.0 ms … 40.0 ms 0.0 ms … max. time

0.1 ms 0.1 ms

± 1 ms ± 3 ms

Loop impedance (EN 61557-3)

0.00 Ω … 9.99 Ω 10.0 Ω … 99.9 Ω 100 Ω … 999 Ω 1.00 kΩ … 9.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±10 % of reading ±10 % of reading

Line impedance (EN 61557-3)

0.00 Ω … 9.99 Ω 10.0 Ω … 99.9 Ω 100 Ω … 999 Ω 1.00 kΩ … 9.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±10 % of reading ±10 % of reading

Voltage

0 V … 550 V

±(2 % of reading + 2 digits)

Frequency

15.0 Hz … 499.9 Hz

0.1 Hz

±(0.2 % of reading + 1 digit)

Phase sequence (EN 61557-7)

1.2.3 or 3.2.1

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

140 x 230 x 80 mm

Weight

0.93 kg

STANDARD SET

• • • •

Accuracy

Instruction manual on storage media Short instruction manual Handbook on storage media Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3122 set

MI 3122 • Instrument Smartec Z Line - Loop / RCD • Soft hand strap • Schuko-plug test cable • Test lead, 3 x 1.5 m • Test probe, 3 pcs (blue, black, green) • Crocodile clip, 3 pcs (blue, black, green) • Power supply adapter + 6 NiMH rechargeable batteries, type AA

Resolution

Accessories 1.61

1. 35

Electrical Installation Safety

Single-functional testers MI 3123 SMARTEC Earth / Clamp The MI 3123 SMARTEC Earth / Clamp is a new generation earth resistance tester with the ability to perform 4-wire earth resistance measurement and 4-wire specific earth resistance measurement. With the optional A 1018 and A 1019 current clamps the instrument can perform 4-wire earth resistance measurement with one current clamp, contactless earth resistance testing with two clamps and TRMS current measurement up to 20 A. Configurable limits enable a PASS / FAIL evaluation of test results. All the results can be saved on the instrument and then downloaded via the optional software for evaluation and professional report generation after testing. The lightweight design, large bright LCD screen, built-in help screens, optional downloading via RS232 or USB ports and overvoltage category CAT IV make the MI 3123 an incredible earth resistance measuring instrument.

MEASURING FUNCTIONS • Earth resistance, 4-wire method; • Earth resistance, 4-wire method with one current clamp (option); • Earth resistance, two clamps method (option); • Specific earth resistance; • TRMS current (option).

KEY FEATURES • Earth resistance measurement: instrument performs standard 4-wire earth resistance tests with two earthing rods and specific earth resistance measurement. • Selective earth resistance test: optional 4-wire earth resistance measurement in combination with an additional current clamp is used for measuring earth resistance of individual earthing rods. • Contactless earth resistance test: earth resistance measurement with 2 current clamps without breaking the

1. 36

• •

•

• •

loop is intended for measuring resistance of individual earthing rods and is recommended first of all for urban areas. Downloadable: downloads via RS232 or USB cable directly to the PC with the help of the optional software. Upgradeable: if changes occur to the regulations upgrades can be made to the firmware to keep the instrument up to date. Help screens: instrument comes complete with built-in help screens for referencing on site. Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. Custom limits: the limits can be set on any function, in that case large green and red lights of the LEDs will indicate a PASS or FAIL evaluation of test result. Easy to use: large bright LCD display and large buttons enable easy handling of the instrument (even while wearing gloves). Magnetic holder: magnet for fixing instrument on metal surfaces enables hands-free operation.

Accessories 1.61

APPLICATION • Testing on TT and IT systems; • Testing sub-station earthing; • Lightning system testing.

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Earth resistance (4-wire method (EN 61557-5); 4-wire method with one current clamp)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω 2000 Ω … 9999 Ω

0.01 Ω 0.1 Ω 1Ω 1Ω

±(3 % of reading + 3 digits) ±(3 % of reading + 3 digits) ±5 % of reading ±10 % of reading

Earth resistance (2 clamps method)

0.00 Ω … 19.99 Ω 20.0 Ω … 30.0 Ω 30.1 Ω … 99.9 Ω

0.01 Ω 0.1 Ω 0.1 Ω

±(10 % of reading + 10 digits) ±20 % of reading ±30 % of reading

Specific earth resistance (EN 61557-5)

0.0 Ωm … 99.9 Ωm 100 Ωm … 999 Ωm 1.00 kΩm … 9.99 kΩm 10.0 kΩm … 99.9 kΩm >100 kΩm

0.1 Ωm 1 Ωm 0.01 kΩm 0.1 kΩm 1 kΩm

Calculated value, consider earth resistance 4-wire method

TRMS Current

0.0 mA … 99.9 mA 100 mA … 999 mA 1.00 A … 19.99 A

0.1 mA 1 mA 0.01 A

±(3 % of reading + 3 digits)

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT IV / 50 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

140 x 230 x 80 mm

Weight

0.85 kg

MI 3123 • Instrument Smartec Earth / Clamp • Soft hand strap • Test lead, 4.5 m (blue) • Test lead, 4.5 m (red) • Test lead, 20 m (green) • Test lead, 20 m (black) • Earth test rod, 4 pcs • Power supply adapter + 6 NiMH rechargeable

• • • •

batteries, type AA Instruction manual on storage media Short instruction manual Handbook on storage media Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3123 set

STANDARD SET

Accessories 1.61

1. 37

Electrical Installation Safety

Single-functional testers MI 3110 EurotestIM The MI 3110 EurotestIM is a perfect tool for testing of permanent integrated or portable Low Voltage Electrical Installa-tions supplied by Generator or Transformer and protected by an IT earthing system. Designed for simple but efficient safety testing of Integrated IT Earthing System powered with LV Generator or Transformer! With a single, pre-programmed AUTO SEQUENCE ® with sub-tests and adjustable limits it is possible to perform all the necessary verifications of safety limits of a specific LV IT installation.

MEASURING FUNCTIONS

APPLICATION

STANDARDS

• Voltage, frequency and phase sequence. • Line impedance and prospective short circuit current. • Voltage drop. • First fault leakage current (ISFL). • Testing of insulation monitoring devices (IMD).

• Safety and functionality on IT installations in industry, in hospitals; • Connection of portable power generators; • Firefighting mobile equipment, generators and pumps; • Military vehicles and generators; • Police vehicles and generators; • Construction sites and Road maintenance; • SAT and radio / TV broadcasting mobile equipment; • Safety and functionality on IT installations on the airports, concert halls, fair locations with generators; • Marines and ships; • Mines, other special locations; • Adjustment and calibrations of IMD devices.

Functionality: • IEC/EN 61557 Other reference standards for testing: • EN 60364-4-41; • BS 7671; • AS/NZS 3017 Electromagnetic compatibility: • IEC/EN 61326-1; • IEC/EN 61326-2-2 Safety: • IEC/EN 61010 -1; • EN 61010-2-030; • EN 61010-031

KEY FEATURES • AUTO SEQUENCE ®: One single AUTO SEQUENCE ® with programmable limits and sub-tests ensuring Safety on all PASS bar-rier parameters. • Voltage monitor: IT System recognizing, Voltage Range and Voltage Balance. • ISFL test: ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE. Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current. • IMD control: IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control. • IMD adjust: Alarm Trigger or Trip-Out Check and Adjust.

1. 38

Accessories 1.61

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Voltage

0 V … 550 V

±(2 % of reading + 2 digits)

Frequency

0.00 Hz … 9.99 Hz 10.0 Hz … 499.9 Hz

0.01 Hz 0.1 Hz

±(0.2 % of reading + 1 digit)

Phase sequence (EN 61557-7)

1.2.3 or 3.2.1

Line impedance (EN 61557-3)

0.00 Ω … 9.99 Ω 10.0 Ω … 99.9 Ω

0.01 Ω 0.1 Ω

±(5 % of reading + 5 digits)

Prospective short-circuit current

0.00 A … 0.99 A 1.0 A … 99.9 A 100 A … 999 A 1.00 kA … 99.99 kA 100 kA … 199 kA

0.01 A 0.1 A 1A 10 A 1000 A

Consider accuracy of line resistance measurement

First fault leakage current (ISFL)

0.0 mA … 19.9 mA

0.1 mA

±(5 % of reading + 3 digits)

Threshold indicative insulation resistance

5 kΩ … 640 Ω

5 kΩ

Indicative values Up to 128 steps

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

Dimensions

230 x 103 x 115 mm

Weight

1.1 kg

STANDARD SET

• • • • • • •

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3110 set

MI 3110 • Instrument EurotestIM • Soft carrying bag • Mains measuring cable • Test lead, 3 x 1.5 m • Test probe, 3 pcs • Crocodile clip, 3 pcs • Set of carrying straps • RS232-PS/2 cable • USB cable

Set of NiMH battery cells Power supply adapter PC software EuroLink PRO Short instruction manual Instruction manual on storage media Handbook on storage media Calibration Certificate

1. 39

Electrical Installation Safety

Single-functional testers MI 2088 Earth Insulation Tester The MI 2088 Earth Insulation Tester is a high professional, multifunctional, portable test instrument intended for carrying out earth resistance, insulation resistance and continuity of protection conductors measurements. The Earth Insulation Tester enables 4-wire earth resistance measuring method, 4-wire earth resistance method in combination with one clamp, two clamps earth resistance measurement, 4-wire specific earth resistance measurement and TRMS current measurement. Besides the breakdown voltage of overvoltage protection devices can be checked by the instrument. All the results can be saved on the instrument and then downloaded with the help of the EarthLink software to the computer for evaluation and report generation after testing. The MI 2088 Earth Insulation Tester performs earth resistance, continuity, insulation and voltage measurements required by the EN 61557 standard.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Insulation resistance with DC voltage; • Continuity of PE conductors with 200 mA test current with polarity change; • Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping; • Voltage; • Earth resistance (4-wire method, one clamp method, two clamps method); • Specific earth resistance; • TRMS leakage and load currents (option); • Overvoltage protection devices testing.

• Earth resistance measurement: instrument performs 4-wire earth resistance measurement with two additional rods; 4-wire earth resistance measurement in combination with an additional current clamp; earth resistance measurement with 2 current clamps without breaking the loop and 4-wire specific earth resistance measurement. • Downloadable: downloads via RS232 cable directly to the PC with the help of the software included in the standard set. • Polarity swap: automatic polarity reversal on continuity test. • Insulation range: wide range of insulation test voltages from 50 V to 1000 V, resistance measuring range up to 30 GΩ. • PC SW EarthLink included in the standard set enables downloading of test results and parameters and creation of test reports.

• Initial and periodic testing of domestic and industrial installations; • Testing of single and multiphase systems; • Testing of TT and TN systems.

1. 40

Accessories 1.61

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN/HD 60364; • AS/NZ 3018; • CEI 64.8; • HD 384; • BS 7671; • VDE 0413; • VDE 0413 Electromagnetic compatibility: • EN 50081 - 1; • EN 50082 - 1 Safety: • IEC/EN 61010-1; • IEC/EN 61010-031; • IEC/EN 61010-2-032

FUNCTION

Measuring range

Insulation resistance (EN 61557-2)

U ≥ 250 VDC: R: 0.000 MΩ … 1.999 MΩ 2.00 MΩ … 19.99 MΩ 20.0 MΩ … 199.9 MΩ 200 MΩ … 1999 MΩ 2.00 GΩ … 19.99 GΩ 20.0 GΩ … 29.9 GΩ U < 250 VDC: R: 0.000 MΩ … 1.999 MΩ 2.00 MΩ … 19.99 MΩ 20.0 MΩ … 199.9 MΩ

Resolution

Accuracy

0.001 MΩ 0.01 MΩ 0.1 MΩ 1 MΩ 10 MΩ 100 MΩ

±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) ±(1 % of r. / 1 GΩ + 2% of r. + 2 digits) ±(1 % of r. / 1 GΩ + 2% of r. + 2 digits) ±(1 % of r. / 1 GΩ + 2% of r. + 2 digits)

0.001 MΩ 0.01 MΩ 0.1 MΩ

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Continuity 200 mA of PE conductor with polarity change (EN 61557-4)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(2 % of reading + 2 digits) ±3 % of reading ±3 % of reading

Low resistance continuity measurement, test current 7 mA (continuous measurement)

0.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.1 Ω 1Ω

±(3 % of reading + 3 digits) ±(3 % of reading + 3 digits)

Earth resistance 4-wire method

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω 2.00 kΩ … 19.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±5 % of reading

Earth resistance 4-wire method with one current clamp

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 999 Ω 1.00 kΩ … 1.99 kΩ

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits)

2-clamp earth resistance measurement

0.00 Ω … 19.99 Ω 20.0 Ω … 100.0 Ω

0.01 Ω 0.1 Ω

±(10 % of reading + 2 digits) ±20 % of reading

Specific earth resistance (EN 61557-5)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω 2.00 kΩ … 19.99 kΩ 20.0 kΩ … 199.9 kΩ 200 kΩ … 999 kΩ (a < 8 m) 200 kΩ … 1999 kΩ (a ≥ 8m)

0.01 Ω 0.1 Ω 1Ω 10 Ω 0.1 kΩ 1 kΩ 1 kΩ

±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±(2 % of reading + 3 digits) ±5 % of reading ±5 % of reading ±5 % of reading ±5 % of reading

TRMS Current

0.0 mA … 99.9 mA 100 mA … 999 mA 1.00 A … 9.99 A 10.0 A … 99.9 A 100 A … 200 A

0.1 mA 1 mA 0.01 A 0.1 A 1A

±(5 % of reading + 3 digits) ±5 % of reading ±5 % of reading ±5 % of reading ±5 % of reading

Varistor Test

0 V … 1000 V

±(5 % of reading + 10 V)

Power supply

4 x 1.2 V rechargeable batteries or 4 x 1.5 V alkaline batteries, type C

Over voltage category

CAT III / 300 V; CAT II / 600 V

Protection class

Double insulation

COM port

RS232

Dimensions

265 x 110 x 185 mm

Weight

1.7 kg

STANDARD SET

MI 2088 - 20 m • MI 2088 ST • Earth test set, 20 m (test lead, 4 x 1 m; 2 x test lead, 20 m; 2 x test lead, 4.5 m; 4 x earth test rod; small soft carrying bag)

MI 2088 ST • Instrument Earth-Insulation Tester • Test lead, 2 x 1,5 m • Soft carrying bag • RS232 cable • Test probe, 2 pcs (red, black) • Crocodile clip • PC Software EarthLink • Instruction manual • Handbook on storage media • Calibration certificate

Picture of MI 2088 - 20 m set

TECHNICAL DATA

MI 2088 - 50 m • MI 2088 ST • Earth test set, 50 m (test lead, 4 x 1 m; 2 x test lead, 50 m; 2 x test lead, 1 m; 2 x test lead, 4.5 m; 4 x earth test rod; soft carrying bag)

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 41

Electrical Installation Safety

Other instruments / adapters / accessories MI 3144 Euro Z 800 V The MI 3144 Euro Z 800 V is a Multifunction, portable battery (Li-ion) or mains powered test instrument with excellent IP protection: IP65 (case closed), IP54 (case opened). It can be controlled via an Android app aMESM, MI 3152, MI 3152H, MI 3155 or MI 3325. The MI 3144 Euro Z 800 V is intended for measuring the effectiveness of automatic trip out protection in case of faults in transformers and other HV equipment. With its high precision line and loop impedances on AC and DC circuits, high current dR 300A loop and line measurements for testing of partial currents and partial voltage drops, contact voltage measurement, ELR electrical leakage relay testing with fault current injection and trip-out time measurement and DC Source, accumulator, battery, DC lines and circuit measurement it is ideal for testing in industrial settings.

KEY FEATURES

APPLICATION

SUPPORTED INSTRUMENTS

• Hi Precision 4-wire 300A Z Line and Z Loop Impedance Tester; • Hi Range impedance measurements in 800 V / 16 ... 420 Hz AC networks; • DC Source & Line Resistance measurements in 3 ... 260 V DC networks; • Hi Current dR 300A 4-wire Partial Voltage drops and Current's Path Resistances; • Earth Leakage Relay (ELR) Trip-out Testing Time and Current; • ELR supported types AC, A, B; • Ground Fault Analysis with Contact, Touch and Step Voltage; • Floating Voltmeter for partial contact results; • One-Clamp Hi Current Grounding method with clamps (Flex & Iron); • Selectable test load (16.6 % to 100 %); • Improved thermal performance; • Portable battery (Li-ion) or mains powered test instrument; • IP protection: IP65 (case closed), IP54 (case opened); • CAT IV 600V (3000 m) safety category; • Bluetooth communication; • Black box design (remote- controlled via an Android device).

• Live Power Transformer Hi Precision 4-wire 300A Z Line / Loop Impedance Testing. • Partial Voltage Drops and Partial Clamp Current’s Path Resistances. • Airports High Frequency Band 16 ... 420 Hz Installation Impedances testing. • DC Networks’ and Power Sources’ Line and Loop Resistances. • Flex & Iron One-Clamp High Current dR 300A Grounding method for Lightning systems. • High Current dR 300A Integrity of Grounding system with Flex and Iron OneClamp method. • ELR (MRCD) trip-out Current and trip-out Time testing. • Earth Potentials by method of measuring Step, Touch and Transfer voltages. • Automatic trip-out protection evaluation in case of faults in transformers, generators, turbines, contactors, distribution boards and switchyards whenever energetic loads and sources of protection exceed 200A. • Power transformer and motor winding measurement. • High accuracy battery resistance testing. • Ground grid integrity testing by measuring the resistance between two risers. • U contact measurement.

• MI 3152 EurotestXC (Bluetooth, RS-232) • MI 3152H EurotestXC 2.5kV (Bluetooth, RS-232) • MI 3155 EurotestXD (Bluetooth, RS-232) • MI 3325 MultiserviserXD (Blueooth only) • aMESM as a console for performing tests

1. 42

Accessories 1.61

STANDARDS Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1 • EN 61010-2-030 • EN 61010-031 • EN 61010-2-032 Functionality: • EN 61557 • IEEE 81-2012 • EN 60947-2 Annex M • EN 60909-0 Li–ion battery pack: • EN 62133-2

TECHNICAL DATA Measuring range 0.1 mΩ … 199.9 mΩ 200 mΩ … 1999 mΩ 2.00 Ω … 19.99 Ω 0.1 mΩ … 199.9 mΩ 200 mΩ … 1999 mΩ 2.00 Ω … 19.99 Ω 0.1 mΩ … 199.9 mΩ 200 mΩ … 1999 mΩ 2.00 Ω … 19.99 Ω 0 mΩ … 1999 mΩ 2,00 Ω … 19,99 Ω 0.0 V … 199.9 V 200 V … 999 V 1 mV … 1999 mV 2.00 V … 19.99 V 20.0 V … 199.9 V 0.1 mA … 199.9 mA 200 mA … 1999 mA 2.00 A … 19.99 A 0.1 ms … 199.9 ms 200 ms … 1999 ms 2.00 s … 20.00 s

Impedance [Z] High Current ΔR Impedance [Z] High Current Rsel DC Resistance [R] R line mΩ Earth Potential [U] Utouch Earth Potential [U] Um ELR Test [I and t] ELR I ELR Test [I and t] ELR t

FUNCTION Current [I] I

Type A 1281

Current [I] I

A 1227 A 1609

Range 0.5 A 5A 100 A

Measuring range 10 mA … 749 mA 0.10 A … 7.49 A 2 A … 149 A

1000 A 30 A 300 A 3000 A

20 A … 999 A 0.6 A … 59.9 A 6 A … 599 A 0.06 kA … 5.99 kA

GENERAL DATA Battery power supply Battery charging time Mains power supply Over-voltage category Protection classification Measuring category Pollution degree Degree of protection Dimensions Weight

STANDARD SET MI 3144 ST • Instrument MI 3144 Euro Z 800 V • Mains cable • RS232-PS/2 cable • Test lead 5 m, black, 2 pcs • Test lead 5 m, red, 2.5 mm2, 2 pcs • Test lead 50 m, red, 2.5 mm2* • Test lead 20 m, black • Test lead 50 m, green* • Large Kelvin test clip, 2 pcs • Crocodile clip, black, 2 pcs • Crocodile clip, red, 2 pcs • Crocodile clip, green • Test probe, black, 2 pcs • Test probe, red , 2 pcs • G clamp • Human body resistance probe

Display range 0 … 749 mA 0.00 … 7.49 A 0.0 … 99.9 A 100 … 149 A 0 … 999 A 0.0 … 59.9 A 0 … 599 A 0.00 … 5.99 kA

Resolution 0.1 mΩ 1 mΩ 10 mΩ 0.1 mΩ 1 mΩ 10 mΩ 0.1 mΩ 1 mΩ 10 mΩ 1 mΩ 10 mΩ 0.1 V 1V 1 mV 10 mV 0.1 V 0.1 mA 1 mA 10 mA 0.1 ms 1 ms 10 ms

Accuracy ±(5 % of reading + 3 mΩ)

Resolution 1 mA 0.01 A 0.1 A 1A 1A 0.1 A 1A 0.01 kA

Uncertainty ±(2.5 % of reading + 3 digits)

±(5 % of reading + 3digits) ±(5 % of reading + 3 mΩ) ±(5 % of reading + 3digits) ±(8 % of reading + 3 mΩ) ±(8 % of reading + 3digits) ±(5 % of reading + 3digits) Calculated value ±(2 % of reading + 2 digits)

±(5 % of reading + 3 digits)

±(2 % of reading + 3 digits)

±(3.5 % of reading + 3 digits)

7,2 V DC (4,4 Ah Li-ion) typical 3,0 h (deep discharge) 90 ... 260 VAC, 45 ...65 Hz, 80 VA 300 V CAT II reinforced insulation 600 V CAT IV 2 IP 65 (case closed), IP 54 (case open) 360 x 160 x 330 mm 7 kg, (without accessories)

• Test rod, 2 pcs • Step voltage plates, 2 pcs • Metrel aMESM Android PRO P 1102-AND Licence key integrated in instrument • Short instruction manual • Calibration certificate • Protective bag for accessories • Soft carrying bag*

• Jumbo case • Extension cable reel • Jumbo case mount

* Replaced by test leads on a cable reel in MI 3144 EU set.

MI 3144 EU • MI 3144 ST • Test lead 5m, green • Test lead on a cable reel, 75 m, red, 2.5 mm2 • Test lead on a cable reel, 75 m, green • Professional current earth spike, 42 cm • 1-phase flexible current clamp 3000/300/30 A / 1 V (A 1609) with 5m current clamp extension cable (A 1648)

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

Picture of MI 3144 EU set

FUNCTION Impedance [Z] Z line mΩ Z loop mΩ

1. 43

NEW Installation Electrical Electrical Installation Safety Safety

Other instruments / adapters / accessories MI 3143 Euro Z 440 V The MI 3143 Euro Z 440 V is a Multifunction, portable battery (Li-ion) or mains powered test instrument with excellent IP protection: IP65 (case closed), IP54 (case opened). It can be controlled via an Android app aMESM, MI 3152, MI 3152H, MI 3155 or MI 3325. The MI 3143 Euro Z 440 V is intended for measuring the effectiveness of automatic trip out protection in case of faults in transformers and other HV equipment. With its high precision line and loop impedances on AC circuits, high current dR 300A loop and line measurements for testing partial voltage drops and contact voltage measurement, it is ideal for testing in industrial settings.

KEY FEATURES

APPLICATION

SUPPORTED INSTRUMENTS

• Hi Precision 4-wire 220A Z Line and Z Loop Impedance Tester; • Hi Range impedance measurements in 440 V / 16 ... 420 Hz AC Networks; • Hi Current dR 300A 4-wire Partial Voltage drops; • Ground Fault Analysis with Contact, Touch and Step Voltage; • Floating Voltmeter for partial contact results • Selectable test load (33.3 % to 100 %); • Improved thermal performance; • Portable battery (Li-ion) or mains powered test instrument; • IP protection: IP65 (case closed), IP54 (case opened); • CAT IV 600V (3000 m) safety category; • Bluetooth communication; • Black box design (remote- controlled via an Android device).

• Live Power Transformer Hi Precision 4-wire 220A Z Line / Loop Impedance Testing. • Partial Voltage Drops Resistances. • Earth Potentials by method of measuring Step, Touch and Transfer voltages. • Automatic trip-out protection evaluation in case of faults in transformers, generators, turbines, contactors, distribution boards and switchyards whenever energetic loads and sources of protection exceed 200A. • Power transformer and motor winding measurement. • Ground grid integrity testing by measuring the resistance between two risers. • U contact measurement. • High current injection ground fault simulation.

1. 44

Accessories 1.61

STANDARDS Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1 • EN 61010-2-030 • EN 61010-031 Functionality: • EN 61557 • IEEE 81-2012 • EN 60909-0 Li–ion battery pack: • EN 62133-2

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Impedance [Z] Z line mΩ Z loop mΩ

0.1 mΩ … 199.9 mΩ

0.1 mΩ

±(5 % of reading + 3 mΩ)

200 mΩ … 1999 mΩ

1 mΩ

2.00 Ω … 19.99 Ω

10 mΩ

±(5 % of reading + 3digits)

Impedance [Z] High Current ΔR

0.1 mΩ … 199.9 mΩ

0.1 mΩ

±(5 % of reading + 3 mΩ)

200 mΩ … 1999 mΩ

1 mΩ

2.00 Ω … 19.99 Ω

10 mΩ

±(5 % of reading + 3digits)

DC Resistance [R] R line mΩ

0 mΩ … 1999 mΩ

1 mΩ

±(5 % of reading + 3digits)

2,00 Ω … 19,99 Ω

10 mΩ

Earth Potential [U] Utouch

0.0 V … 199.9 V

0.1 V

200 V … 999 V

Earth Potential [U] Um

1 mV … 1999 mV

1 mV

2.00 V … 19.99 V

10 mV

20.0 V … 199.9 V

0.1 V

Calculated value ±(2 % of reading + 2 digits)

GENERAL DATA Battery power supply

7,2 V DC (4,4 Ah Li-ion)

Battery charging time

typical 3,0 h (deep discharge)

Mains power supply

90 ... 260 VAC, 45 ...65 Hz, 80 VA

Over-voltage category

300 V CAT II

Protection classification

reinforced insulation

Measuring category

600 V CAT IV

Pollution degree

Degree of protection

IP 65 (case closed), IP 54 (case open)

Dimensions

360 x 160 x 330 mm

Weight

6.5 kg, (without accessories)

MI 3143 ST • Instrument MI 3143 Euro Z 440 V • Mains cable • RS232-PS/2 cable • Test lead, 2-wire, 2 pcs* • Crocodile clip, black, 2 pcs • Crocodile clip, red, 2 pcs • Test probe, black, 2 pcs • Test probe, red, 2 pcs • Metrel aMESM Android PRO P 1102-AND Licence key integrated in instrument • Short instruction manual • Calibration certificate • Protective bag for accessories

MI 3143 EU • MI 3143 ST • Test lead 5 m, black, 2 pcs • Test lead 5 m, red, 2.5mm2, 2 pcs • Test lead 20 m, red, 2.5mm2 • Test lead 20 m, black • Test lead 20 m, green • Large Kelvin test clip, 2 pcs • G clamp • Human body resistance probe • Test rod, 2 pcs • Step voltage plates, 2 pcs • Soft carrying bag

Picture of MI 3143 EU set

STANDARD SET

* Replaced by 5 m and 20 m test leads in MI 3143 EU set.

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 45

Electrical Installation Safety

Other instruments / adapters / accessories A 1722 PRCD adapter The A 1722 PRCD Adapter is a multifunction test adapter intended for safety and functional testing of different types of 1-phase and 3-phase PRCDs. The adapter supports simulation of different error states and it has connection inputs for testing of PE wire (if monitored by PRCD), probe test (to test PRCD's touch electrode) and other applicable tests for standardized PRCD’s testing. If used together with the MI 3155 Eurotest XD AUTO SEQUENCE®, the complete PRCD can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional PRCD-based report with MESM.

KEY FEATURES

APPLICATION

• Simulation of errors on input mains; • Accessible Inputs/Outputs for easy connection of safety testers; • Enables testing Continuity in PRCDs with the PE wire monitored.

• Functional testing of the following types of PRCD’s: • PRCD-S (1-phase / 3 pole & 3-phase / 5pole); • PRCD-S+ (1-phase / 3 pole); • PRCD-K/Di (1-phase); • PRCD (2pole and 3pole).

SUPPORTED INSTRUMENTS • MI 3155 EurotestXD; • MI 3152 EurotestXC; • MI 3152H EurotestXC 2.5kV

STANDARDS Safety: • EN 61010-1 Functionality: • DIN VDE 0701-0702; • DIN VDE 0661; • DIN VDE 0100-410

1. 46

• Functional testing, simulation of following faults: • L-open (for 3-phase L1-L3); • N-open; • PE-open; • Reversed wires (for 1-phase L <> PE / L <> N, for 3-phase L1,L2,L3 <> PE / L1,L2,L3 <> N); • External voltage on PE. • Measurement of protective conductor; • Measurement of insulation resistance; • Measurement of PE-current with optional current clamps; • Tripping test; • Probe test.

Accessories 1.61

Testing the continuity of the protective earth conductor.

Testing the 3-phase PRCD

TECHNICAL DATA Error functions

State

Description

Input fault 1-phase

L op

L/L1 conductor open

N op

N conductor open

PE op

PE conductor open

L<>PE

L and PE conductors reversed

L<>N

L and N conductors reversed

Uext (PE)

External voltage on PE

L1 op

L1 conductor open

L2 op

L2 conductor open

L3 op

L3 conductor open

N op

N conductor open

PE op

PE conductor open

L1<>PE

L1 and PE conductors reversed

L2<>PE

L2 and PE conductors reversed

L3<>PE

L3 and PE conductors reversed

L1<>N

L1 and N conductors reversed

L2<>N

L2 and N conductors reversed

L3<>N

L3 and N conductors reversed

Uext (PE)

External voltage on PE

Mains power supply

90-260 VAC, 45-65 Hz

Protection category

300 V CAT II

Measuring category

300 V CAT II

Degree of protection

IP 65 (case closed) IP 40 (case open) IP 20 (mains test socket)

Dimensions

360 x 160 x 330 mm

Weight

4.8 kg

Working temperature range

-10 °C … 50 °C

Maximum relative humidity

90 %RH (0 °C … 40 °C), non-condensing

Working nominal altitude

up to 3000 m

Input fault 3-phase

General

AUTO SEQUENCE EXAMPLE

STANDARD SET

Picture of A 1722 set

Standard set A 1722 • PRCD Adapter A 1722 • 1-ph EU - 3 ph CEE (16 A) mains cable, length 2 m • 1-ph Y - shuko cable A 1723, length 2 m

• 2 mm banana to 4 mm cascade banana adapter, cable length 1 m • Test probe, red • Protective bag for accessories (mounted on the case) • Instruction manual

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 47

Electrical Installation Safety

Other instruments / adapters / accessories A 1632 eMobility Analyser The A 1632 eMobility Analyser is a special accessory designed for functional, diagnostic and electrical safety testing of Electric Vehicle Supply Equipment (EVSE) together with Type 1 and/or Type 2 connections through the support of METREL installation testers. It also supports testing of Mode 2 electrical vehicle (EV) cable safety features through mains fault simulation and electrical safety testing of both Mode 2 and Mode 3 EV charging cables. Fully supported professional station-based and cablebased report creation with MESM software.

KEY FEATURES

STANDARDS

APPLICATION

• Functional testing of EVSE via simulation of electrical vehicle’s CP and PP circuits • Diagnostic testing of EVSE via simulation of errors on CP circuit. • Electrical safety testing of EVSE. • Functional testing of Mode 2 EV cables via simulation of electrical vehicle’s CP and PP circuits. • Diagnostic testing of Mode 2 EV cables via simulation of errors on CP circuit. • Simulation of faults on mains for verification of Mode 2 EV charging cable safety features. • Electrical safety testing of Mode 2 and Mode 3 EV cables. • Accessible inputs/outputs for connection of safety testers. • 1-phase and 3-phase Mode 2 cable connections. • Integrated 4400 mAh Li-Ion battery. • Bluetooth communication with Metrel safety testers.

Electromagnetic compatibility: • EN 61326 Safety: • EN 61010-1 • EN 61010-2-030 • EN 61010-031 Functionality: • EN 61851-1 • HD 60364-6 • EN 60364-7-722 • EN 61557 series Li – ion battery pack: • IEC 62133

• EVSE functional and diagnostic testing according to EN 61851-1 and electrical safety testing according to EN 60364-6.

COMPLETE EVSE TESTING

• Simulation of faults on mains for verification of Mode 2 electrical vehicle (EV) charging cable safety features.

SUPPORTED INSTRUMENTS • • • • •

MI 3152 EurotestXC MI 3152H EurotestXC 2.5kV MI 3155 EurotestXD MI 3325 MultiserviserXD Android App eMobility as a console for performing functional EVSE tests.

1. 48

The combination of A 1632 or A 1532 with Metrel’s installation testers, the MI 3155 or MI 3152, offers a complete solution for testing in circuits with a EV RCD or EV RCM 6 mA d.c. trip-out protection. It is possible to perform a compete RCD test sequence including the 6 mA d.c. ramp test and loop impedance (Zs rcd) measurement without tripping 6 mA d.c. EV RCD or EV RCM. This makes Metrel compliant with standards IEC 62752 (when Mode 2 EV cables are used) and EN 62955 (when Mode 3 cables are used).

Accessories 1.61

TECHNICAL DATA FUNCTION Nominal system voltage range Nominal frequency range Phase rotation Voltage UCP+, UCPFrequency Duty cycle Ievse Toff Simulation functions

PP simulation

CP simulation Diag. functions

System state

Error functions

Uinput fault

Measuring range 100 VAC ... 440 VAC 0 Hz, 14 Hz ... 500 Hz 1.2.3 or 3.2.1 -19.99 V ... 19.99 V 500 ... 1500 Hz 0.1 ... 99.9 % 0.0 … 99.9 A 0 ... 399 ms Misc. > 300 kΩ 1.5 kΩ ± 1.5 % 680 Ω ± 1.5 % 220 Ω ± 1.5 % 100 Ω ± 1.5 % 56 Ω ± 1.5 % > 300 kΩ 2.74 kΩ ± 1.5 % 882 Ω ± 1.5 % 246 Ω ± 1.5 % Misc. no EV connected no EV connected / PWM EV connected EV connected / PWM EV charged EV charged / PWM EV charged and ventilation on EV charged and ventilation on / PWM Error Failure CP signal can’t be classified Misc. L/L1 conductor open L/L2 conductor open L/L3 conductor open N conductor open PE conductor open L/L1and PE conductors crossed External voltage on PE (on input side)

State n.c 13 A 20 A 32 A 63 A 80 A A B C D error A1 A2 B1 B2 C1 C2 D1 D2 E F Invalid State L/L1op L/L2op L/L3op Nop PEop L<>PE Uext (PE)

• Electrical safety testing of 1-phase and 3-phase Mode 2 EV cables • Electrical safety testing of Mode 3 EV cables.

Resolution 1V

Accuracy ±2 % of reading + 2 dig)

1V 0.1 Hz 0.1 % 0.1 A 1 ms

±(2 % of reading + 2 dig) ±1 % of reading ±10 dig Calculated value ±(1 % of reading + 5 dig)

General Battery power supply

7.2 V DC (4.4 Ah Li-ion)

Battery charging time

typical 4 h (deep discharge)

Mains power supply

115 V/230 ~ ± 10 %, 230 V/400 V 3~ ± 10 %- 50 Hz - 60 Hz, 60 VA

Protection category

300 V CAT II

Measuring category

300 V CAT II

Degree of protection

IP 65 (case closed),IP 40 (case open), IP 20 (mains test socket)

Dimensions (W x H x D)

36 cm x 16 cm x 33 cm

Working temperature range

-10 °C … 50 °C

Maximum relative humidity

90 %RH (0 °C … 40 °C), non-condensing

Working nominal altitude

up to 3000 m

Bluetooth module

Class 2

STANDARD SET

Picture of A 1632 set

A 1632 • A 1632 eMobility Analyser • Type 2 Male plug adapter with long CP pin (2 x Metrel connector), 2 m • 1-phase EU - 3 phase CEE (16 A) mains cable, 2 m • 2 mm banana to 4 mm cascade banana adapter, 1 m • Protective bag for accessories * • Instruction manual • Calibration certificate * Mounted on the case

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 49

Electrical Installation Safety

Other instruments / adapters / accessories A 1631 EV monitoring cable The A 1631 EV monitoring cable is a special accessory designed for CP signal, current and voltage monitoring during Electric Vehicle (EV) charging process in conjunction with supported Metrel testers and adapters. It is equipped with a Type 2 female plug connector to connect to an EV and a Type 2 male socket outlet for connecting to Electrical Vehicle Supply Equipment (EVSE).

KEY FEATURES

APPLICATION

• Monitoring during a.c. EV charging with up to 32 A EVSE: • CP signal communication monitoring during charging;* • PP resistance; • Current; • Voltage; • Possible to connect instruments for current and voltage verification (i.e. MI 2883 Energy Master, MI 2884 Energy Master XA); • Possible to simulate external load (up to 13 A) via banana plugs and verify EVSE counters.

• Monitoring of the EV charging process.

SUPPORTED INSTRUMENTS • MI 3152 EurotestXC; • MI 3155 EurotestXD

STANDARDS Functionality:* • EN 61851-1; • HD 60364-6; • EN 60364-7-722 Electromagnetic compatibility: • EN 61326

Safety: • EN 61010-1; • EN 61010-2-030; • EN 61010-031

1. 50

Accessories 1.61

* Requires: A 1632 eMobility Analyser and MI 3152 EurotestXC or MI 3155 EurotestXD.

TECHNICAL DATA Measurement functions

Value

Max. charging current of a.c. EVSE with Type2 connectors

32 A

Max. external load during EV simulation via banana plugs

13 A

General Mains power supply

230 V / 400 V 3~ ± 10 % 50 Hz - 60 Hz, 60 VA 32 A

Protection category

300 V CAT II

Measuring category

300 V CAT II

Degree of protection

IP 65 (case closed) IP 40 (case open)

Dimensions

360 x 160 x 330 mm

Working temperature range

-10 °C … 50 °C

Maximum relative humidity

90 %RH (0 °C … 40 °C), non-condensing

Working nominal altitude

up to 3000 m

STANDARD SET A 1631 • A 1631 T2 EV monitoring cable 32 A • Test lead, 1,5 m, 5 pcs (black - 3 pcs, green - 1 piece, blue - 1 piece) • Test cable with 2 mm banana plug, red, 1 m, 2 pcs

Measuring and Regulation Equipment Manufacturer

Picture of A 1631 set

*The eMobility App can be downloaded free of charge from Android Market.

Accessories 1.61

1. 51

Electrical Installation Safety

Other instruments / adapters / accessories A 1532 EVSE adapter The A 1532 EVSE adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers. It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.

KEY FEATURES

COMPLETE EVSE TESTING

APPLICATION

• Proximity Pilot (PP) resistance selector for simulation of EV cable presence and current rating detection; • Control Pilot (CP) resistance selector for simulation of electric vehicle status; • CP error simulation; • CP communication monitoring via external BNC connector; • Accessible inputs/outputs for connection of safety testers; • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE); • Type 2 Male Plug connector for connection to EVSE; • Electrical safety testing of EVSE; • Voltage indicators on EVSE output; • 6 mA EV RCD support;* • EVSE AUTO SEQUENCE® support;* • MESM report creation;** Basic support: • A 1532 Partial support: • 6 mA EV RCD, EV RCM • EVSE report** Full support*: • Functional test support • EVSE AUTO SEQUENCE® support

• On-site testing of EVSE charging station installation. • Initial and periodic testing of private, semi-private and public EVSE charging stations. • EVSE functional and diagnostic testing according to EN 61851-1 and electrical safety testing according to EN 60364-6. • Possibility to test EVSE side of Mode 2 EV cables. • Control Pilot (CP) fault simulation.

Safety: • EN 61010-1 Functionality: • EN 61851-1 • HD 60364-6 • EN 60364-7-722 • EN 61557 series

* Functional tests and AUTO SEQUENCE® are supported only on the MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers. ** Report printing is only available via the MESM PC SW. The MESM Licence (P 1101) is to be purchased separately.

1. 52

STANDARDS

Accessories 1.61

TECHNICAL DATA FUNCTION Input voltage Frequency Test current Proximity Pilot (PP) simulation Control Pilot (CP) simulation

Measuring range 400 V (3-phase) 50 Hz - 60 Hz 267 A (10ms) intermittent operation Open circuit, 13 A, 20 A, 32 A, 63 A State A (not connected), State B (connected, not charging), State C (charging without ventilation) State D (charging with ventilation), State E (error - CP short to PE via diode) 300 V CAT II IP 40 2 Double insulation 3000 m above sea level 250 x 100 x 70 mm 0.5 m 0.90 kg 0 °C … 40 °C @ 95 % RH, non-condensing -10 °C … +70 °C 90 % RH (-10 °C … +40 °C) 80 % RH (40 °C … 60 °C)

Overvoltage category Protection degree Pollution degree Protection classification Altitude Dimensions Test lead length Weight Working temperature range Storage temperature range Maximum storage relative humidity

SUPPORTED INSTRUMENTS A 1532 EVSE

EV RCD

EV RCM

Zs: no EV Functional EVSE Auto EVSE RCD trip inspections Sequences® report

MI 3155 EurotestXD

•

MI 3152 EurotestXC

•

MI 3152H EurotestXC 2,5 kV

•

MI 3102 BT EurotestXE

•

MI 3100 s EurotestEASI

•

MI 3125 EurotestCOMBO

•

• •

•

Picture of A 1532 set

•

MI 3100 SE EurotestEASI

A 1532 • Instrument EVSE adapter • Small soft carrying bag • Instruction manual

•

MI 3102H BT EurotestXE 2,5 kV • MI 3125 BT Eurotest COMBO

STANDARD SET

AUTO SEQUENCE EXAMPLE

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 53

Electrical Installation Safety

Other instruments / adapters / accessories A 1532 XA EVSE adapter The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open. If used together with Metrel AUTOSEQUENCES®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-bystate) electrically and functionally with a push of a button. It is possible to create a professional stationbased report with MESM.

KEY FEATURES • Banana socket outputs for connection to a 3-phase installation tester; • Voltage indicators on EVSE output; • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection; • Control Pilot resistance selector for simulation of electric vehicle status; • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE); • Type 2 Male Plug connector for connection to EVSE; • 6 mA EV RCD support; • Functional tests support;* • EVSE AUTO SEQUENCE® support;* • MESM report creation;** • Load testing up to 13 A on socket - 1 phase or on banana sockets - 3 phase; • Fault simulation of Diode short, PE-CP short and PE open; • Output BNC connector for CP signal monitoring.

1. 54

APPLICATION

STANDARDS

• On-site testing of EVSE charging station installation; • Initial and periodic testing of private, semi-private and public EVSE charging stations.

Safety • EN 61010-1 Functionality • EN 61851-1

* Functional tests and AUTO SEQUENCE® are supported only on the MI 3155 Eurotest XD, MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers. ** Report printing is only available via the MESM PC SW. The MESM Licence (P 1101) is to be purchased separately.

Accessories 1.61

TECHNICAL DATA FUNCTION

Measuring range

Input voltage

400 V (3-phase)

Frequency

50 Hz

Test current

267 A (10ms) intermittent operation

Maximum load current

13 A continuous operation

Proximity Pilot (PP) simulation

Open circuit 13 A 20 A 32 A 63 A

Control Pilot (CP) simulation

State A (not connected) State B (connected, not charging) State C (charging without ventilation) State D (charging with ventilation)

Error states

CP short to PE via diode Diode short PE open

Overvoltage category

300 V CAT II

Protection degree

IP 40

Pollution degree

Protection classification

Double insulation

Altitude

3000 m above sea level

Dimensions

250 x 100 x 70 mm

Test lead length

0.5 m

Weight

0.90 kg

Working temperature range

0 °C … 40 °C @ 95 % RH, non-condensing

Storage temperature range

-10 °C … +70 °C

Maximum storage relative humidity

90 % RH (-10 °C … +40 °C) 80 % RH (40 °C … 60 °C)

SUPPORTED INSTRUMENTS A 1532 XA EV EVSE RCD

EV RCM

Zs: no EV Functional EVSE Auto EVSE RCD trip inspections Sequences® report

MI 3155 EurotestXD

•

MI 3152 EurotestXC

•

MI 3152H EurotestXC 2,5 kV

•

MI 3102 BT EurotestXE

•

MI 3100 SE EurotestEASI

•

MI 3100 s EurotestEASI

•

MI 3125 EurotestCOMBO

•

MI 3105 EurotestXA

•

MI 3101 EurotestAT

•

• •

•

Measuring and Regulation Equipment Manufacturer

• Picture of A 1532 XA set

•

A 1532 XA • Instrument XA EVSE adapter • Small soft carrying bag • Instruction manual

•

MI 3102H BT EurotestXE 2,5 kV • MI 3125 BT Eurotest COMBO

STANDARD SET

Accessories 1.61

1. 55

Electrical Installation Safety

Other instruments / adapters / accessories A 1507 3-phase active switch adapter The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. In combination with Auto Sequences and one of Metrel’s electrical installation safety testers MI 3155 EurotestXD or MI 3152 EurotestXC it is possible to automate the process of 3-phase system testing even further.

KEY FEATURES

APPLICATION

• Banana socket outputs for connection to a 3-phase system; • Motor driven through Bluetooth communication with Metrel’s electrical safety testers; • Automatic ON/OFF.

On-site automated testing of: • 3-phase systems via the added crocodile clips and probes; • 3-phase sockets with the use of additional adapters.

SUPPORTED INSTRUMENTS • MI 3152 EurotestXC; • MI 3152H EurotestXC 2.5kV; • MI 3155 EurotestXD.

STANDARDS Electromagnetic compatibility: • EN 61326-1 • EN 61326-2-2 Safety: • EN 61010-1 • EN 61010-2-030 • EN 61010-031

1. 56

Accessories 1.61

Supported measurements: • Voltage and 3-phase sequence; • Insulation resistances; • Continuity of protective conductor; • Resistance to earth; • Resistance N-PE; • RCD testing; • Loop / Line impedances.

TECHNICAL DATA Function

State

Misc.

General

Battery power supply

4.5 V d.c. (3 x 1.5 V battery or accu, size AA)

Operation

Typical 30 h

Measuring category

600 V CAT III, 300 V CAT IV

Degree of protection

IP 40 (case open)

Dimensions

198 x 131 x 73 mm

Working temperature range

0 °C … 40 °C

Maximum relative humidity

95 %RH (0 °C … 40 °C), non-condensing

Working nominal altitude

Up to 3000 m

Bluetooth module

Class 2

Working nominal altitude

up to 3000 m

Bluetooth module

Class 2

STANDARD SET

Crocodile clip, black (3pcs), green, blue Small soft carrying bag Instruction manual Calibration certificate

Picture of A 1507

A 1507 • A 1507 3-Phase Active Switch • Power supply adapter + 3 NiMH rechargable batteries, type AA • Test lead, black, (3pcs), green, blue, 1,5 m • Test tip, black (3pcs), green, blue

• • • •

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 57

Electrical Installation Safety

Other instruments / adapters / accessories MI 2093 Line Tracer The MI 2093 Line Tracer is a universal instrument intended for tracing hidden conductive paths under plasters in walls, floors and ground or for determining one wire in a tuft of wires. Fuses or outlets belonging to a certain loop can be located as well. Line Tracer helps the operator to resolve hidden line problems easily (short circuits, interruptions, breakages).

MEASURING FUNCTIONS • Tracing cables in walls, ceilings, floor and ground; • Tracing live or voltage free cables; • Locating cable interruptions and shortcircuits in cables; • Locating concealed sockets and distribution boxes; • Locating fuses and assignment to circuits; • Determining an individual wire in a bundle of wires; • Tracing pipe installations and other conductive loops.

KEY FEATURES • Detection depth up to 2 m can be

achieved. • Works on both, energized and nonenergized systems. • The highly sensitive Receiver R10K detects injected signal around the measured line or object. • Three levels of sensitivity adjustment: low, middle and high. Each level can be additionally precisely adjusted. • Dual, bar-graph and buzzer indicator ensures indication in dark and noisy environment.

APPLICATION • • • •

Electrical installations testing; Cable networks testing; Pipe installations testing; Telecommunication systems testing.

STANDARDS Electromagnetic compatibility: • IEC/EN 61326 Safety: • IEC/EN 61010-1; • EN 61010-031 STANDARD SET MI 2093 • Transmitter T10K • Receiver R10K • Test lead for R10K with built-in resistor and test probe, 1.5 m • Test lead for T10K, 1.5 m, 2 pcs • Special selective probe • Test probe, black, 2 pcs • Crocodile clip, black, 2 pcs • Soft carrying bag • Instruction manual

TECHNICAL DATA

Power supply

4 x 1.5 V alkaline or 4 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 300 V

Dimensions

80 x 50 x 150 mm

Weight

280 g

Receiver R10K Power supply

1 x 9 V battery

Dimensions

45 x 450 x 210 mm

Weight

140 g

1. 58

Accessories 1.61

Picture of MI 2093 set

Transmitter T10K

Electrical Installation Safety

Other instruments / adapters / accessories CS 2099 Eurocheck The CS 2099 Eurocheck is a professional, multifunctional field calibrator intended for use with installation test instruments. Accuracy and functionality of all Metrel and most other manufacturer’s installation testers can be verified with the Eurocheck. The CS 2099 Eurocheck can provide a simple field calibration of the most frequently used functions when testing installations.

STANDARD SET

MEASURING FUNCTIONS

APPLICATION

• Insulation calibration with test voltage up to 1000 V; • Calibration of low resistance and continuity functions; • Fault loop and trip-lock RCD impedance functions calibration (all test currents supported on Metrel instruments); • Calibration of RCD trip-out time function; • Calibration of line impedance measuring function; • Calibration of voltage and frequency; • PE test terminal functional verification; • Automatic polarity verification.

• On-site testing of installation measuring instruments; • Occasional routine control of the safety testers.

CS 2099 • Instrument Eurocheck • Small soft carrying bag • Instruction manual

STANDARDS

Picture of CS 2099 set

Electromagnetic compatibility: • IEC/EN 61326 Safety: • IEC/EN 61010 -1; • EN 61010-031

TECHNICAL DATA Power supply

230 V, 50 / 60 Hz

Overvoltage category

CAT II / 300 V

Dimensions

103 x 61 x 205 mm

Weight

780 g

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 59

Electrical Installation Safety

Other instruments / adapters / accessories A 1199 Ro - Adapter The Ro - Adapter is a special accessory intended for using only with METREL installation testers. It is designed for measurement of specific earth resistance.

APPLICATION

• Adapter is used for performing 4-wire specific earth resistance measurements; • Designed for use in conjunction with most Metrel multifunction installation testers (see Selection Guide for EIS Accessories). • The instrument comes complete with 4-wire test lead, 15 m red extension lead, 2 earthing rods and carrying bag; • Instruction manual contains step by step guide on how to perform the measurement; • It is recommended to use A 1199 in combination with 3-wire 20 m earth test lead set (S 2026).

• 4-wire earth resistance measurement; • Specific earth resistance measurement.

STANDARDS Functionality: • IEC/EN 61557 Other reference standards for testing: • IEC/EN/HD 60364; • AS/NZ 3018; • CEI 64.8; • BS 7671; • VDE 0413 Electromagnetic compatibility: • IEC/EN 61326 Safety: • IEC/EN 61010 -1

STANDARD SET A 1199 • Ro - adapter • Small soft carrying bag • Earth test rod, 2 pcs • Test lead, red, 15 m • Test lead 4 x 1.5 m • Instruction manual • Calibration certificate

TECHNICAL DATA Power supply

4 x 1.5 V alkaline or 4 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT IV / 50 V

Dimensions

100 x 200 x 50 mm

Weight

390 g

1. 60

Accessories 1.61

Picture of A 1199 set

KEY FEATURES

Selection Guide for EIS Accessories Part number

Description

Target application

MI 3144

Euro Z 800V

The Euro Z 800 V AC and DC impedance adapter with up to 800 V test voltage and 16 ... 420 Hz range, high current dR300 A with flex clamps, 4-wire, U step-contact and ELR trip-out testing.

• • •

MI 3143

Euro Z 440V

The Euro Z 440 V AC impedance adapter with up to 440 V test voltage and 16 ... 420 Hz range, high current dR300 A , 4-wire and U step-contact testing.

• • •

A 1632

eMobility Analyser

The A 1632 is used for diagnostic, electrical safety and functional testing of Type 2 EVSE and Mode 2 and Mode 3 EV charging cables.

• • •

A 1532

A 1532 EVSE adapter

EVSE (Electric Vehicle Supply Equipment) adapter is a special accessory intended for testing Mode 3 EV supply equipment with a type 2 connector.

• • • • • • •

A 1532 XA

A 1532 XA EVSE adapter

EVSE (Electric Vehicle Supply Equipment) adapter is a special accessory intended for testing Mode 3 EV supply equipment with a type 2 connector.

• • • • • • •

A 1507

3-phase switch adapter

The A 1507 is an accessory intended for automating electrical safety testing of three phase circuits.

• • •

A 1597

Human body resistance probe

The A 1597 is an external adapter used for human body resistance simulation.

A 1740

Calibration box 5kV

Calibration Box for checking insulation measurements in the field (max. test voltage = 5kV).

• • • • • • •

A 1199

Ro-adapter

Ro-adapter is intended for performing earth resistance measurement in combination with installation safety tester.

• • • • •

A 1378

EurotestPV Remote

PV remote unit for measurement and logging of irradiance and temperature values.

• •

A 1384

PV Safety Probe

The PV safety probe can safely disconnect the PV installation from the installation in case of a permanent short circuit.

• •

Measuring and Regulation Equipment Manufacturer

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

• •

Accessories 1.61

1. 61

•

Part number

Description

Target application

CS 2099

Eurocheck

Eurocheck is a professional multifunctional field calibrator intended for use with installation safety testers.

•

A 1160

Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA

Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.

• • • • • • • • • • • •

•

A 1169

Fast charger for AA, C, D and 9 V block batteries

Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.

• • • • • • • • • • • • •

•

A 1135

Power supply adapter 12 V / 1,2 A

Adapter for fast battery charging.

• •

A 1548

Power supply adapter 12 V / 0,5 A

A 1569

Power supply adapter 12 V / 3 A

Adapter for fast battery charging.

•

A 1567

4400mAh battery pack

Li-Ion Battery pack 7,2V 4400mAh.

•

A 1568

8800mAh battery pack

Li-Ion Battery pack 7,2V 8800mAh.

•

S 2080

1,2 V, 2100 mAh AA rechargeable batteries type AA, 6 pcs

A set of 6 pieces of rechargeable batteries type AA.

S 2125

1,2 V, 2400 mAh AA rechargeable batteries type AA, 6 pcs

A set of 6 pieces of rechargeable batteries type AA.

A 1427

PV Reference Cell

Irradiance sensor for PV measurements.

• •

A 1400

PV Temperature probe

Temperature probe for measurement of PV module temperature.

• •

A 1172

Luxmeter sensor, type B (PS/2)

Luxmeter sensor, type B, for high-accuracy illuminance measurement e.g. for emergency lightning inspection.

• • • • •

A 1173

Luxmeter sensor, type C (PS/2)

Illuminance probe for light conditions measurements with 0,1Lux resolution.

• • • • •

• • • •

• • •

• • • • • • • • • •

Option

1. 62

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

Accessories 1.61

• • • •

• •

• • • • •

•

Part number

Description

Target application

A 1191

Receiver R10K

Receiver R10K is used for wire tracing, fuse identification and fault finding in low voltage electrical installations.

• • •

A 1192

Selective probe for R10K

Very sensitive inductive sensor serves for contactless fuse and cable finding. To be used with A 1191.

•

A 1067

Test lead for R10K, 1.5 m, with built-in resistor

Test lead with probe enables fast and accurate fuse finding and current circuit allocation. To be used with A 1191.

A 1256

Plug commander (straight cable)

Single phase schuko plug commander with TEST and MEM function keys for fast and simple measurements on one phase sockets.

A 1272

Plug commander (for Smartec)

Single phase schuko plug commander with TEST and MEM function keys for fast and simple measurements on one phase sockets.

A 1314

Plug commander

Single phase, 3-pin plug commander with TEST, MEM and function selection buttons and RGB LED status indicator.

• • • • • • • •

•

A 1314 BLK

Plug commander

Single phase, 3-pin plug commander with TEST, MEM and function selection buttons and RGB LED status indicator.

• • • • • • • •

•

A 1401

Tip commander

Single phase, 3-wire tip commander with TEST, MEM and function selection buttons, RGB LED status indicator and front LED lamp.

• • • • • • • •

•

A 1401 BLK

Tip commander

Single phase, 3-wire tip commander with TEST, MEM and function selection buttons, RGB LED status indicator and front LED lamp.

• • • • • • • •

•

A 1244

Tip commander, 2-wire (straight cable)

Single phase 2-wire commander with test tip, TEST and SAVE function keys for installation safety measurements.

• •

A 1270

Tip commander (for Smartec)

Single phase 2-wire commander with test tip, TEST and MEM function keys for installation safety measurements.

• •

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 63

Part number

Description

Target application

A 1300

Tip commander, 3-wire (for Smartec)

Single phase 3-wire commander with test tip, TEST and MEM function keys for installation safety measurements.

A 1018

Current clamp (low range, leakage)

High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 1.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.

• • • • •

A 1019

Current clamp

Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.

• • • • •

A 1281

A 1609

A 1227

•

• •

•

Four smart ranges current clamp 0,5/5/100/1000 A/ 1 V, with jaw opening: 5.2 cm; Max. conductor size < 50 mm for measuring alternating currents in low and medium power installations. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the instrument.

•

1-phase flexible current Single phase smart flexible current clamp with three selectable measuring ranges Sensor clamp length: 175 cm; max. conductor size: 540 mm. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

Single phase smart flexible current clamp with three selectable measuring ranges Sensor length: 48 cm; max. conductor size: 140 mm. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

Current clamp 0,5/5/100/1000 A/1V

1-phase flexible current clamp 3000/300/30 A /1V

A 1648

Current clamp extension cable, 5 m

Extension cable for current clamps.

A 1068

Connection cable for clamp, 1.5 m

Connection cable for connecting current clamp on the instrument MI 2093.

A 1074

Mini current clamp 200 A / 0.2 A

Mini current clamp 200 A / 0.2 A with jaw opening 15 mm for current measurement in confined spaces.

A 1391

AC/DC Current clamp

AC/DC Current Clamp with 40 and 300 A range.

• • • • •

A 1558

Test lead, 4 x 1.5 m

4-wire test lead for continuity and impedance measurements on electrical installations.

•

Option

1. 64

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

Accessories 1.61

•

• •

•

• •

•

Part number

Description

Target application

A 1643

4-Wire extension leads, 5 m

Extension test leads for 4-wire measurements

•

• •

A 1644

4-Wire extension leads, 10 m

Extension test leads for 4-wire measurements

•

• •

A 1021

Test lead, 4 x 1 m

4-wire test lead for measurements on electrical installations.

A 1011

Test lead, 3 x 1.5 m

3-wire test lead for measurements on single or three phase electrical installations.

• • • • • • • •

•

A 1677

Test lead, 3 x 3 m

3-wire test lead for measuring of single or three phase systems.

• • • • • • • •

•

A 1055

Test lead, 2 x 1.5 m

2-wire test lead for continuity and insulation resistance measurements on electrical installations.

•

A 1385

PV fused test lead

Test cable for simultaneous AC/DC power and efficiency measurements of PV inverters.

S 2001

Earth test set, 4-wire, 20 m

Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 4 x 1 m; test lead, 20 m, 2 pcs; test lead, 4 m, 2 pcs; earth spikes, 4 pcs; soft carrying bag.

•

S 2002

Earth test set, 4-wire, 50 m

Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 4 x 1 m; test lead, 50 m, 2 pcs; test lead, 4 m, 2 pcs; test lead, 1 m, 2 pcs; earth spikes, 4 pcs; carrying bag.

•

S 2041

Earth test set, 4-wire, 50 m (for Smartec)

Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead 20 m, test lead 4 m; test lead, 1 m, 2 pcs; earth spikes, 4 pcs; soft carrying bag.

S 2026

Earth test set, 3-wire, 20 m

Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 20 m, 2 pcs; test lead, 4.5 m; earth spikes, 2 pcs; soft carrying bag.

S 2027

Earth test set, 3-wire, 50 m

Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead, 4.5 m; test lead, 1 m, 2 pcs; earth spikes, 2 pcs; soft carrying bag.

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

•

• •

•

• • • • •

• • • • • • • •

Option

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 65

Part number

Description

Target application

A 1530

G clamp

Professional G clamp for perfect contacting, with banana socket.

• •

A 1022

Earth test rod

Professional earth test rod, 30 cm

• •

A 1528

Professional current earth spike 42 cm

Professional earth spike, 42 cm, with banana socket (drill).

• •

S 2053

Step voltage plates, 2 pcs

Light replacement for 25kg Step voltage probes A 1353

• •

S 2058

Insulation test plates

Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-4-1).

A 1290

PC SW EuroLink PRO Plus with USB and RS232-PS/2 cable

Professional PC Software EuroLink PRO Plus enables downloading, data management and complete test report preparation. Delivered with RS232-PS/2 and USB communication cables.

P 1100

Metrel FW Profile Licence Key With BASIC SW Set

Licence key for an additional FW profile and BASIC MESM functionality.

• • •

P 1101

Metrel MESM BASIC to PRO licence key Upgrade

Licence key for upgrading the Metrel ES Manager to advanced version with professional report creation and Excel PRO export functionality.

• • • • • • •

P 1102

Metrel FW Profile Licence Key With PRO SW Set

Licence key for an additional FW profile and PRO MESM functionality.

• • •

P 1104

Metrel SDK Licence Key

SDK Licence key for instrument integration with 3rd party SW.

• • •

The aMESM is an advanced portable appliance safety Testing tool for Android devices. The Application is free for download from the Android Market via Google Play. For a full-featured application, a special Licence is needed. Please contact your local distributer for further information.

• • • • • • •

P 1102-AND Metrel aMESM PRO Licence Key Upgrade

•

Option

1. 66

Accessories 1.61

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

•

• • • •

•

• •

• • •

• •

•

Part number

Description

Target application

A 1291

PC SW EuroLink PRO with USB and RS232-PS/2 cable

PC Software EuroLink PRO enables downloading and test results management and printing of test reports. Delivered with RS232-PS/2 and USB communication cables.

A 1292

Upgrade code EuroLink PRO to EuroLink PRO Plus

Password for upgrading standard PC software EuroLink PRO to advanced PC SW EuroLink PRO Plus with professional report creation facility.

• • • • • • • • • •

A 1431

EuroLink Android app

EuroLink Android app.

• • • •

A 1012

Test lead, green, 4m

Test lead for continuity measurements.

• • • • • • • • •

A 1154

Test lead, black, 4m

Test lead for earth and continuity measurements.

• • • • • • •

•

A 1026

Test lead, red, 20 m

Test lead for continuity measurements.

• • • • • • •

•

A 1153

Test lead, black, 20 m

Test lead for earth and continuity measurements.

• • • • • • •

•

A 1620

Test lead 5 m, black

Test lead, black, 5 m, cascade banana plug on both sides.

• •

A 1621

Test lead 20 m, black

Test lead, black, 20 m, cascade banana plug on both sides.

• •

A 1527

Test lead 5 m, red, 1.5 mm2

Test lead, red, 5 m, cascade banana plug on both sides.

• •

A 1640

Test lead 20 m, red, 1.5 mm2

Test lead, red, 20 m, cascade banana plug on both sides.

• •

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

• • •

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 67

•

Part number

Description

Target application

A 1630

Test lead 5 m, red

Test lead, red, 5 m, banana plug on both sides.

• •

A 1608

Test lead 20 m, green

Test lead, green, 20 m, cascade banana plug on both sides.

• •

A 1164

Test lead, black, 50 m

Test lead for earth and continuity measurements.

A 1509

Test lead 50m black on cable reel

Test lead on a cable reel, black, 50 m, extendable.

• •

A 1510

Test lead 50m green on cable reel

Test lead on a cable reel, green, 50 m, extendable.

• •

A 1654

Test lead on a cable reel, 50 m, red, 2.5 mm2, extendable

Test lead on a cable reel, red, 50 m, 2.5 mm2, extendable

• •

A 1660

Extension test leads on Extension leads for High Current grounding reel, 75 m, red, green, and lightning systems testing and Earth 2.5 mm2 Potentials testing.

• •

A 1661

Jumbo case mount for Adapter for connection of A 1660 to MI 3144 A 1660 jumbo case.

• •

S 2009

Test lead set, 2 m, 4 pcs

Set of 4 test leads is intended for two clamp earth resistance measurement to connect current clamps on the instrument.

S 2012

Continuity test lead, 10 m, 2 pcs (red, black)

2 pieces of extension test lead for continuity measurements.

• • • • • • •

•

S 2025

Test lead, 1.5 m, 2 pcs (black, red)

Connection leads for different measurements.

• • • • • • •

•

A 1619

Test lead, 2-wire, 2 pcs Set of 2 test leads bound together. The set is intended for testing with line impedance and loop impedance with impedance adapter.

Option

1. 68

Accessories 1.61

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

• • • • • • •

•

• •

•

Part number

Description

Target application

A 1740

A 1740 Calibration box 5kV

The A 1740 Calibration Box 5kV is intended for calibration purposes insulation resistance testers.

• • • • • • •

A 1593

Large Kelvin test clip

Large robust Kelvin crocodile clip for accurate resistance measurements on larger objects.

•

• •

A 1595

Large test crocodile, black

Large robust crocodile clip for resistance measurements on larger objects.

• • •

• •

A 1596

Large test crocodile, red

• • •

• •

A 1013

Crocodile clip, black

A 1064

Crocodile clip, red

A 1309

Crocodile clip, green

• • • • • • •

•

A 1310

Crocodile clip, blue

• • • • • • •

•

A 1014

Test probe, black

• • • • • • •

• •

A 1015

Test probe, blue

A 1016

Test probe, red

A 1062

Test probe, green

A 1778

Magnetic contact probe

The A 1778 magnetic probe (with a Ø6.6 mm right-angle magnetic adapter and a Ø4 mm socket) is designed for semi-temporary measurement of voltage on steel screw terminal blocks.

• • • • • • • • • • •

•

A 1201

Insulated rod for CONTINUITY measurement

Insulated rod enables insulation resistance and continuity measurement on hard-to-reach objects, e.g. luminaries.

• • • • • • • • • •

•

A 1202

Additional extension part for A 1201

Additional extension part for Insulated rod for CONTINUITY measurement A 1201.

• • • • • • • • • •

•

A 1658

Jumbo case for MI 3144

Waterproof, portable case, rated as an IP 65, for outdoor application of electrical safety instruments. This portable lockable case is intended to be used in combination with impedance adapters and its accesories.

A 1736

Carrying case

Carrying case for MI 3155 EurotestXD together with the Euro set of accessories – for earth resistance testing with or without stakes, testing of impedances, insulation and safety devices in installations, functional tests like power and harmonics, and much more. Some extra space is left available for any additional equipment the user may want to bring along.

• • •

A 1737

Carrying case

Case with foam inserts with slots for a Eurotest multifunctional electrical installation safety tester and MI 3309 BT DeltaGT. Multiple possible instrument & accessory combinations. We recommend the MI 3110 EurotestIT, MI 3309 DeltaPAT, MD 9231 AC/DC current clamp and A 1207 three phase adapter combination.

• • • • • • •

A 1738

Carrying case

It can fit for a Eurotest multifunctional electrical installation safety tester and either an A 1532 EVSE adapter or A 1532 XA EVSE adapter. It has an additional large slot for the tester’s accessories or other equipment.

• • • •

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.

Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.

• • • • • • • •

• •

• • • • • • • • • •

• • •

•

• •

• • •

•

• • •

• • • • • • • • •

• • • •

• •

• • • •

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 1.61

1. 69

1. 70

Part number

Description

Target application

S 2138

S 2138 Set of wheels for carrying cases A 1736, A 1737, A 1738

Wheels and trolley that can be added to carrying cases for easier transport.

• • • • • • •

A 1551

Carrying bag (L)

Small carrying bag for transport and storage of test instrument and all belonging standard set and euro set accessories.

•

A 1552

Carrying bag (XL)

Large carrying bag for transport and storage of test instrument and all belonging standard set and euro set accessories.

•

A 1006

Soft carrying bag

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

A 1289

Carrying bag (M)

A 1020

Small soft carrying bag

A 1271

Carrying bag (S)

A 1302

Set of carrying straps

A 1707

Set of carrying straps

A 1303

Soft hand strap

Soft hand strap for holding the instrument.

A 1376

3-phase adapter 16 A male / 16 A female, 5 pin, 2 m

3-phase test adapter, for testing of 3 phase extension leads in combination with A 1322 / Active 3-phase Adapter.

•

A 1724

3-ph Y-CEE 16 A cable, 3-phase adapter for testing 3-phase PRCDs 2m

•

A 1725

3-ph Y-CEE 32 A cable, 3-phase adapter for testing 3-phase PRCDs 2m

•

A 1110

Three phase adapter

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

• • • •

• • • • • • •

• • • • •

Small soft carrying bag for transport and storage of test instrument or accessories. •

Set of carrying straps for carrying the measuring instrument around the neck allowing free hand use of the tester.

• • • • • • •

3-phase test adapter for installation safety testing on 3-phase sockets type 16 A 3CEE.

Accessories 1.61

• • •

• • • • • • • •

• • •

•

Part number

Description

Target application

A 1111 A 1215

Three phase adapter with switch

3-phase adapter with selection switch for installation safety testing on 3-phase sockets type 16 A 3CEE. The adapter allows seamless switching between measurements.

A 1641

Adapter CEE 5-P 16A (male) / Schuko plug

3-phase adapter for testing 3-phase sockets type 16 A CEE with support of the A 1507 3-Phase Active Switch.

•

A 1642

Adapter CEE 5-P 32A (male) / Schuko plug

3-phase adapter for testing 3-phase sockets type 32 A CEE with support of the A 1507 3-Phase Active Switch.

•

A 1171

RS232 / USB adapter with 1 m cable

RS232 / USB adapter for instruments without USB communication port.

•

A 1017

Communication cable RS232

RS232 interface cable for connecting the instrument with the PC.

•

A 1436

Bluetooth dongle

External Bluetooth adapter for wireless connection between Metrel’s instruments and Smart phones, tablets and PCs.

A 1105

Barcode scanner

Barcode scanner for identification of barcode labelled installation structure elements like sockets, switches, fuses, switchboards, etc.

• • •

A 1652

Barcode scanner (Bluetooth)

Barcode scanner for identification of barcode labelled appliances.

• • •

A 1653

QR / Barcode scanner (Bluetooth)

QR / Barcode scanner for identification of barcode labelled appliances.

• • •

AM 1337

RFID Reader

RFID reader.

Measuring and Regulation Equipment Manufacturer

MI 3155 MI 3152 MI 3152H MI 3102 BT MI 3102H BT MI 3100 SE MI 3125 BT MI 3108 MI 3109 MI 3121 MI 3122 MI 3123 MI 3110 MI 2088 MI 3143 MI 3144 A 1722 A 1532 A 1507 MI 2093

Photo

• • • • • • • •

•

• •

Accessories 1.61

1. 71

1. 72

Accessories 1.61

Content High Voltage Insulation / Continuity / Earth / Transformer 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

GOOD TO KNOW Testing the HV, Step / Contact Voltage and Earth Resistance

2.02

EARTH TESTER Selection Guide for Earth Tester MI 3290 Earth Analyser MI 3288 Earth Insulation Tester NEW MI 3295 Step Contact Voltage Measuring System

2.06 2.07 2.10 2.12

TRANSFORMER TESTERS MI 3280 DT Analyser

2.14

CONTINUITY TESTERS Selection Guide for Continuity Insulation Testers MI 3252 MicroOhm 100A MI 3250 MicroOhm 10A MI 3242 MicroOhm 2A

2.17 2.18 2.20 2.22

HIGH VOLTAGE INSULATION TESTERS Selection Guide for HV Insulation Testers MI 3210 TeraOhmXA 10 kV MI 3209 TeraOhmLT 10 kV NEW MI 3205 TeraOhmXA 5 kV MI 3201 TeraOhm 5 kV Plus MI 2077 TeraOhm 5 kV MI 3202 GigaOhm 5 kV MI 3121H 2,5 kV Insulation / Continuity

2.24 2.26 2.28 2.30 2.32 2.34 2.36 2.38

SELECTION GUIDE FOR HV ACCESSORIES

2.40

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

High Voltage Insulation / Continuity / Earth / Transformer

Electrical Installation Safety HIGH VOLTAGE INSULATION / CONTINUITY / EARTH / TRANSFORMER Appliance / Machine / Switchboard Safety Power Quality Analysis Equipment for laboratories and Schools Multimeters / Clamp meters / Voltage testers / Thermal cameras Software

2. 1

Itot

IRiso

Riss1

IRCpi

Rtot

ICiso

Good insulation

Guard

Cpi

+ U

Rpi

Riss2

Ciso

Good to know Testing the HV, Step / Contact Voltage and Earth Resistance Cpi

Riso

Rpi

Riss2

+ U

Ciso

Itot

IRiss

200

Find out more about Insulation measurement techniques Insulation is a material property and is measured as insulation resistance. Characteristics of insulation tend to change Isf time, normally getting worse by through ageing. Various physical phenomena have IRiso influence on insulation characteristics, like IRiss temperature, dirt, humidity, mechanical and IRCpi stresses, high-energy radiation, electrical etc. Harsh installation environments, 400 600 800 t (s) especially those with temperature extremes and / or chemical contamination, cause further deterioration.

Guard Itot U5 IRiss

Basics of insulation measurements According to Ohms law,

ge of Ciss

Discharging of Cpi__ U

IRiso U4 IRCpi U3 ICiso

Riss1

IRiso

IRCpi Cpi

Riso Guard

Rpi

Riss2

Tslope

Ttest

Insulation resistance and capacitance model, partial and total currents

U µA

Applied test voltage

Riss1 & Riss2

Surface leakage resistances

Riso

Isf Insulation resistance

ICiso

Ciso30

IRiss Riss1

Insulation capacitance

IRiso

Polarization resistance

IRiss Polarization capacitance

Guard

IRCpi

0 0

200

400

600

Ciso

Capacitance charging current

U2 U1 µA 0

40 0

T1 ICiso

T4 IsfT5

IRiso

20 10 0Rins 0

200

Good insulation

µA reading test Spot This 40 is the simplest and fastest way of Isf insulation ICiso resistance testing. Unfortunately 30 only one test, with no prior IRiso tests, can be 20 a rough guide as to how only goodcontaminated or bad with Insulation IRiss dirt and moisture the 10 insulation is. In this test the instrument IRCpi is connected across 0 1the insulation of the 10 t (min) 0 tested A test voltage is applied800 for t (s) 0 item. 200 400 600 a fixed period of time; usually a reading is taken after 1 minute as can be seen in U5 figure. U4 U3

Rins

IRiss

IRCpi

400

600

In practice the insulation resistance measurement instrument does not include Bad ins Ran ideal voltage source. At the spot start insulation all test to available instrument power is used t 0 result charge the capacitor Ciso for short period. The voltage on connection points drops because of this.

t (s)

Itot IRiso Discharging IRiss of Cpi IRCpi

spot test result

800 t (s) Good Typical current / time diagram for a real voltage sourceinsulation

t (s)

Typical insulation resistance/time diagram for a spot reading test

Rins

The spot reading test should only be carried out when the temperature is Discharge of insulation Discharging of Ciss dew point. Cpi above the

Good insulation

METREL’s hint: The lower limit of insulation resistance may often be established according to the one0 mega-ohm rule: Bad Insulation resistance should be at leastinsulation 1 MΩ for each kilovolt of operating voltage, but Good insulation not 0 less than 1 MΩ (e.g. a motor rated at 5 t (s) 0 10 20 30 40 50 60 70 kV working voltage should have a minimum resistance of 5 MΩ). µA

Bad insulation

I tot

200

400

Rpi

Riss2

600

800

t (s)

Ciso

U1 0

800 t (s)

t 0

Insulation contaminated with dirt and moisture

2. 2

µA

spot30 test 20 result 10

ICiso

Isf IRiso

Accessories 2.40

Rins

Good

IRiss

U2 insulation

IRCpi

Itot

10 t (min)

Time diagrams of good and bad insulation tested with the timerise method

Rins

Time rise method / polarization index / 30 dielectric absorption ratio Current diagram for an ideal voltage source IRiso U When test voltage 20 is applied a bad Bad Ustop Riss insulation causes drop of the value Riso Iand When DC voltage is suddenly appliedinsulation to the 10 the increasing in the insulation leakageIRCpi insulation, the test current will startGood at a U insulation 0 0 current IRiso. The absorption current is high value, gradually decrease with time, 0 200 400 600 800 Ustart t (s) Good insulation 10 20Rtot 30 40 50 60 70 masked by a high insulation leakage and0 finally level off to a stable value. The current. The insulation leakage current leakage current does not change with time, 0 stays at a fairly constant value and the and this current is the primary factor on Tslope Ttest 0 t Ustart resistance reading stays low. A good which the insulation quality may be judged. Ub insulation showsUcontinuous increasing of U the resistance over a period. This is caused Types of insulation testingInsulation contaminated with 0 Ustop 0 Defective and moisture by the absorption that can be clearly seen. Various Varistor types of insulationdirt testing are usedt breakedown insulation The effect lasts far longer to determine insulation characteristics. t (min) 0 1 10absorption than the time required for charging the Ustart Ustart capacitance of the insulation. Ub DC voltage testing and AC voltage testing Itot AC testing U5 0 0 AC0 testing is more suitableTfor performingt Tslope test Varistor Defective 0 Good Rtot insulation U4 breakedown insulation withstanding orIRCpi dielectric IRiso ICiso tests. While DC test gives moreCqualitative picture about piU3 + the tested Riso insulation. U 0

Ciso

+ U

Polarization absorption current

I tot 0

+ U

Rtot

Insulation leakage current

20 Discharge of 10 Ciss

ICiso

ofICiso four t (min)

Surface leakage current

Itot

Rpi

Total current

IRiss

Cpi

Riss2

Cpi

Riso

µA 0

the current does not depend on time. But a simple measurement of insulation Bad resistance shows that the current depends insulation on time. The reasons for such behaviour Good insulation phenomena of the current are different t (s) 30 40 50 60 70 in insulation material after a voltage is applied. A typical insulation model is presented in figure below.

Rpi

Insulation contaminated with dirt and moisture IRiso IRCpi R totaliss1current Itot comprises

The 0 1 partial currents.

Safety, operability and reliability are the most important parameters of electrical spot test device containing insulation and this is the result reason why insulation has to be measured. Insulation is measured in the initiating phase of electrical device and also later during maintenance works or repairing, and measurements are of simple and diagnostic t (s) 60 type.

Riso

t (s)

ICiso

30 20

Rins

IRiso

IRiss

Guard U2

IRCpi

0 0

200

400

600

t (s)

800

Rpi

Riss2

+ U

Ciso

Rins

spot test result

Cpi

Riso

0 0

G in

Itot IRiss

µA discharging current measured 1 min after theRtot was switched off IRCpivoltageICiso 40 t (s) 60 voltage Rins Cpi test spot + 30 CisoRiso capacitance of tested object test U 20 Rpi result iso Typical values of dielectric C discharge

The result of this measurement is polarization index (PI), which is definedRiss1 Rins as the ratio of measured resistance in two time slots (typically the ratio is 10 Guard min value to 1 min value at a continuous Riss2 measurement). Tested material status

Discharge of Ciss

1 - 1.5

Not acceptable (older types)

I tot

2-4 (typically 3)

Considered as good insulation (older types)

4 (very good insulation)

µA Modern type of good insulation systems

Rtot (10 min) PI= ________ Rtot (1 min)

The results of this method don’t0 depend 0 give 200 on temperature and the method can a conclusive information without comparing records of past tests.

Tested material status

Bad insulation

1 ≤ DAR ≤ 1.25

Acceptable insulation

> 1.4

Very good insulation Itot Typical values for dielectric discharge

IRiss Riss1

Rtot (1 Imin) IRiso ________ RCpi DAR= Rtot (30 s) Riso

uard

Riss2

µA 40 ICiso

30 20 10 0 0

200

Rins

ICiso

Cpi

+ U

Ciss

>4 2 -4 <2

0 0 Tested material status

spotBad test Critical result Good

400

600

800

t (s)

The dielectric discharge test is very useful Bad Ufor testing a multi-layer insulation. insulation

200

µA 400

600

Bad 800 t (s) 10 t (min) insulation Itot

IRiss U t (s) voltage test 60 IRCpi test is one of the The withstanding voltage 0 basic tests. is very t (s) 0 insulation 200 400 Its principle 600 800 simple the voltage is stressing the device Rins under testofuntil the requiredoftest time or Ustart Discharge Discharging Good Ub Ciss of insulation Cpi insulation breakdown is reached.

Withstanding 0 10

I tot

U The

Varistor voltage, Defective time gradient of 0 increasing breakedown insulation maximum voltage and the time of Bad maximum test voltage are very important insulation Bad and depend on the type of device under insulation t 0 test. These parameters are defined in Good Ustart Ub adequate standards. The indication ofinsulation 0 0 10 20 40 increase 50 60 in 70the t (s) a breakdown is a 30 sudden 0 current through insulation, Defective beyond the t Varistor 0 breakedown insulation predefined limit. µA

The device under test is exposed to different test voltages that are applied Insulation contaminated in steps. The voltage starts atwith the lowest dirt and moisture value and increases Bad with defined steps up 0to the 1 highest level.insulation 10 t (min) 40

Itot

40 U 30 Ustop

IRiso

20 10 Ustart 0 0

Good insulation

30 U5

Good insulation

Ustop

IRCpi with Insulation contaminated dirt and moisture

will rapidly decrease.Itot 40 U1 • A good insulation has approximately 030 Iat Riso all voltages. constant resistance 0 T1 T2 T3 T4 T5

Cpi

I tot

Dielectric discharge Rpi Ciso It is difficult to determine the polarization index if polarization absorption current IRCpi is small compared to the others. Rather than measuring the polarization current during an insulation test, the dielectric 0 discharge (DD) test can be performed. DD 0 10 20 test is carried out after the completion of the insulation resistance measurement. Isf Typically the insulation material is left IRiso connected to the test voltage for 10 ... 30 min andIRiss then discharged before U the DD test is carried out. After 1 min a discharge IRCpi Ustop current is measured to detect the charge t (s) 400 600of the800 re-absorption insulation material. A high re-absorption current indicates Ustart contaminated insulation (mainly based on moisture). DD value

Good Discharging IRiso of insulation C 0 pi t (s) 0 IRiss 10 20 30 40 50 60 70 The current/time diagram of a good and bad insulation tested IRCpi discharge method with dielectric

Step voltage insulation resistance test t (s) 40 50 60 70 Testing with a voltage far below the one spot often reveals moisture expected in service Ustart test and dirt in insulation, whereas effects result of ageing or mechanical damage of a 0 fairly clean Tand slope dry insulation Ttest may not U 0 t be revealed at such low stress. The step Ustop voltage method is very useful when testing with an instrument that has a lower test t (s) 0 60 voltage than the rated test voltage of the Ustart tested item. In other words, step voltage test gives us useful results even in case Rtot insulation 0 able to Good stress insulation with Tslope we are notTtest 0 t Discharge of Discharging of nominal electrical voltages. 0

Dielectric absorption ratio (DAR) is0 similar 10 20 Rins to the polarization index method. The only difference are periods for capturing the results which are usually 30 s (or 15 s) and 1 minute. DAR value

IRiss

t 0 30 IRiso Typical step voltage measurement results U5 20 U4 IRiss ins R The shape of the10curve represents the spot U3 IRCpi quality of insulation: test 0 result µA • The resistance of0a damaged U2 200 insulation 400 600

Bad insulation

Isf

ICiso 30 Discharge of Ciss 20 I tot 10

Good insulation

t (s)

Isf IRiso

0 0

Typical values of polarization index

Discharging of Cpi

ICiso

PI value

Ba in

Good insulation

Idis (1 min) IRiso 0 U

t (s)

IRiss IRCpi 200

400

Tslope

600

800

t (s)

Ttest

Measuring procedure for withstanding voltage measurement.

U3 U2

U1 0 0 T1 T2 T3 T4 T5 Typical measuring procedure for step voltage measurement

Tslope

Ttest

t Ustart

Rins Good insulation

Varistor breakedown

Defective insulation

Measuring procedure for withstanding voltage measurement.

Values of dielectric discharge

Bad insulation

DD= Idis (1 min) U Ciso 0

Discharge of Ciss I tot

t (s)

Measuring and Regulation Equipment Manufacturer Cpi

Accessories 2.40

Discharging of

µA 40

Itot

2. 3

800

Typical connections for:

Earthing Correct earthing of exposed conductive parts of the object assures that the voltage on them stays below dangerous level in case of a fault. If fault happens a fault current will flow through the earthing electrode.

Power cables

Measurement of insulation resistance of communication cable using the guard terminal. Resistance is measured between one lead and other leads

Measurement of insulation resistance of cable between one conductor against other conductors including lead sheath

Measurement of insulation resistance of cable between one conductors against other conductors and lead sheath using the guard terminal to avoid leakage effects at the end of cable

Home appliances and similar electrical devices

A typical voltage distribution occurs around the electrode (the “voltage funnel”). Fault currents close to power distribution objects (substations, distribution towers, plants) can be very high, up to 200 kA. This can result in dangerous step and contact voltages. If there are underground metal connections (intended or unknown) the voltage funnel can get atypical forms and high voltages can occur far from the point of failure. Therefore the voltage distribution in case of a fault around this objects must be carefully analysed.

Measurement of household device, protection class I and class II

Induction motor

Measurement of insulation resistance of a cable between a conductor and lead sheath

Control and communication cable

Measurement of insulation resistance of induction motor between all three phases against metal enclosure

Power transformer Dangerous voltages on a faulty earthing system

Standard IEC 61140 defines following maximum allowed time / contact voltage relations: Measurement of insulation resistance between one lead of communication cable against other leads and sheath The simplest measurement of insulation resistance of transformer

Maximum time of exposure

Voltage

> 5 s to ∞

UC ≤ 50 VAC or ≤ 120 VDC

< 0.4 s

UC ≤ 115 VAC or ≤180 VDC

< 0.2 s

UC ≤ 200 VAC

< 0.04 s

UC ≤ 250 VAC

Maximum time durations vs fault voltage

For a longer exposure the touch voltages must stay below 50 V. Measurement of insulation resistance of communication cable using the guard terminal. Resistance is measured between a lead and sheath Measurement of insulation resistance on one HV winding against metal enclosure

2. 4

Accessories 2.40

During the measurement a test current is injected into the earth through an auxiliary probe. A higher injected current improves the immunity against spurious earth currents.

Step voltage measurement The measurement of step voltage is performed between two ground points at a distance of 1 m. The 25 kg measuring probes simulates the feet. The voltage between the probes is measured by a voltmeter with an internal resistance of 1 kΩ that simulates the body resistance.

Specific earth resistance For the specific earth resistance the test current is injected through two current probes (C1/H and C2/E). The voltage probes S and ES must be placed between the current probes (equidistance ’a’ between probes must be considered). Using different distances between the test probes means that the material at different depths is measured. By increasing the distances ’a’ a deeper layer of ground material is measured. Bus bar connection

Step voltage measurement

Contact voltage measurement The measurement of contact voltage is performed between an earthed accessible metal part and ground. The voltage between the probes is measured by a voltmeter with an internal resistance of 1 kΩ that simulates the body resistance.

Specific earth resistance measurement

Low Resistance Measurement Four-wire Kelvin method When measuring resistance <20 Ω it is advisable to use a four-wire Kelvin measurement technique for achieving high accuracy. By using this type of measurement configuration the test lead resistance is not included in the measurement, and the need for lead calibrating and balancing is eliminated. Typical connections for:

Connecting instrument to the measured device

The measuring current is passed through the unknown resistance Rx using the C1 and C2 leads. The placing of these leads is not critical but should always be outside the P1 and P2 leads. The Volt drop across the Rx is measured across P1 and P2 and these should be placed exactly at the points to be measured.

Contact voltage measurement

Earth resistance measurement For the earthing resistance test a voltage and current probe (serves as auxiliary earth) are used. Because of the voltage funnel it is important that the test electrodes are placed correctly.

Circuit breaker connection

Earth resistance measurement

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 5

Earth testers Selection Guide for Earth Testers FEATURES

Description

MI 3290 GX MI 3290 GF MI 3290 GP MI 3290 GL MI 3288 Earth Earth Analyser Earth Analyser Earth Analyser Earth Analyser Insulation Tester NEW

MI 3295 Step Contact Voltage Measuring System

•/•/•

-/-/•

55 … 15 kHz

55 … 164 Hz

55 Hz

Range @ 55 Hz

0 … 20 kΩ

0,010 … 20 kOhm

0 ... 200 Ω

1 Clamp (Selective method)

•

Range @ 55 Hz

0 … 20 kΩ

0,010 … 20 kOhm

2 Clamp (Stakeless method)

•

Range @ 164 Hz

0 … 100 Ω

1 Flex/4Flex Clamp

•/•

Fixed freq./sweep

55/1500 Hz

Range @ 55 Hz

0 … 20 kΩ

High frequency method

25 kHz

Range

0 … 300 Ω

Pulse method

10/350 µs

Range

0 … 200 Ω

EARTH 2/3/4 wire method RESISTANCE Fixed freq./sweep

0 … 200 Ω

SPECIFIC Wenner / EARTH Schlumberger RESISTANCE Range

•/•

•/-

0 … 20 kΩm

0 … 100 kΩm

EARTH POTENTIAL

Earth Potential

•

Step & Touch voltage

•

Max. test current

> 220 mA

> 120 mA

55 A

•

RESISTANCE DC resistance Range/max. res. @200mA @7mA AC impedance

•

Range/max. res.

0 … 20 kΩ/10mΩ

AC CURRENT Iron clamps Flex clamps

2. 6

0 … 2 kΩ/10mΩ 0 … 2 kΩ/10mΩ 0 … 20 kΩ/0,1Ω 0 … 20 kΩ/0,1Ω

0,020 Ohm … 2 kΩ/1mΩ 0 … 999 kΩ/0,1Ω

• 4 pcs (GX4) 1 pce (GX1)

• 1 pce

Accessories 2.40

• •

MI 3290 Earth Analyser is a portable, battery or mains powered test instrument with excellent IP protection (IP 54 open case), intended for measurement of earth resistance, specific earth resistance and earth potential of various energetic and nonenergetic objects. The user can choose between different methods from classic 3 wire earth resistance measurement up to one or four clamp method for measurement of pylons. He has a choice of measurement methods with different frequency methods: single frequency or frequency sweep from 55 Hz to 15 kHz, HF method with 25 kHz and pulse method simulating the lightning strike. High electrical noise immunity makes this instrument best suited for industrial environment. Instrument is available in multiple sets which are a combination of different accessories and measurement functions.

MEASURING FUNCTIONS • • • • • • • • • • • •

Earth Resistance 2,3,4 -pole; Selective Earth Resist (1 x clamp); Earth Resistance (2 x iron clamps); Specific Earth Resistance (Wenner and Schlumberger method); HF-Earth Resistance (25 kHz, acc. to IEEE_Std 81); Earth Resistance of mono pylons with 10 m flex clamp; Earth Resistance of multi–leg pylons with up to four flex clamps; Current measurement (Iron, flex clamps); Low Ohm measurement 7 mA and 200 mA; Earth Potential; Step and contact measurements; Impulse Earth measurement 10/350 µs.

KEY FEATURES • Possibility of performing all types of earth measurements with a single instrument. • Analysis of earth impedance as a function of the frequency due to a wide measurement frequency band (55 Hz ... 15 kHz).

• Earth measurements on pylons with protective earth cable connected. • Measurement on mono towers and 4-leg tower. • A wide variety of measuring clamps: from iron clamps to flex clamps with 10 m length. • HF-Earth resistance measurement (acc. to IEEE_Std 81). • Sweep mode Z(f) on screen. • High resolution colour touch screen, 4.3” TFT. • Floating Mains (universal 90 … 260 V AC) or battery powered (built in fast charger). • High degree of protection: IP 65 case closed, IP 54 case open. • Checkbox - different self-check methods. • DC resistance measurements. • Impulse impendance measurement for simulating the lightning strike. • Support for single or automated measurements. • PC SW for measurement pre and post processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing.

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

APPLICATION Measurement of protective earthing of: • Mono and multi-leg pylons with protective earth cable connected; • MV to LV transformer stations; • Ski lifts, radio towers; • Solar Power plants, wind and water turbine; • Industrial areas.

STANDARDS Functionality • EN 61557 - 5 • IEEE 80 – 2000 • IEEE 81 – 2012 • IEEE 142 • IEEE 367 – 2012 Electromagnetic compatibility • EN 61326 Safety • EN 61010 - 1 • EN 61010 - 2 - 030 c • EN 61010 - 2 - 032 • EN 61010 - 031

2. 7

High Voltage Insulation / Continuity / Earth / Transformer

Earth testers MI 3290 Earth Analyser

TECHNICAL DATA Method

Additional info

Earth resistance 2, 3, 4 -pole

Open-terminal test voltage 20 or 40 VAC Short-circuit test current > 220 mA Test frequency 55 Hz…329 Hz 659 Hz … 2.63 kHz 3.29 kHz … 15 kHz Open-terminal test voltage 40 VAC Short-circuit test current > 220 mA Test frequency 55 Hz … 329 Hz 659 Hz … 1.50 kHz Open-terminal test voltage 40 VAC Short-circuit test current > 220 mA Test frequency 55 Hz…329 Hz 659 Hz … 1.50 kHz Passive mode Test frequency 82 Hz ... 329 Hz

Selective earth resistance with iron clamp

Selective earth resistance of pylons with flex clamp

Earth resistance with two iron clamps Specific earth resistance ro Wenner and Schlumberger method Earth Potential

HF-Earth Resistance 3 pole Impulse Earth Resistance

DC Resistance RLOW DC Resistance CONT AC Impedance Current RMS (Iron Clamp) Current RMS (Flex Clamp) Battery power supply Mains power supply Degree of protection Dimensions Display Communication Memory

Open-terminal test voltage 20 or 40 V AC Short-circuit test current >220 mA Test frequency 164 Hz Open-terminal test voltage 40 V AC Short-circuit test current >220 mA Test frequency 55 ÷ 329 Hz Open-terminal test voltage 40 VAC Short-circuit test current >40 mA Test frequency 25.000 Hz Open-terminal test voltage ~120 V peak Short-circuit test current ~6 A peak Impulse waveform 10 / 350 µs Test current 200 mA Test current 7 mA Test frequency 55 Hz … 15 kHz Nominal frequency 45 Hz …1.5 kHz Nominal frequency 45 Hz …1.5 kHz 14.4 V DC (4.4 Ah Li-ion) 90-260 VAC, 45-65 Hz, 100 VA (300 V CAT II) IP 65 (case closed) IP 54 (case open) 360 x 160 x 330 mm Colour TFT display, 4.3 inch, 480 x 272 pixels USB, BT >1GB

Measurement range

Uncertainty

0.010 Ω … 19.99 kΩ 0.00 Ω … 1.999 kΩ 0.00 Ω … 199.9 Ω

±(3 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(8 % of reading + 3 digits)

0.010 Ω … 19.99 kΩ 0.00 Ω … 1.999 kΩ

±(8 % of reading + 3 digits)

0.010 Ω … 19.99 kΩ 0.00 Ω … 1.999 kΩ 0.00 Ω … 19.99 kΩ 0.00 Ω … 9.99 Ω 10.0 Ω … 49.9 Ω 50.0 Ω … 100 Ω 0.00 Ωm … 19.99 kΩm

±(8 % of reading + 3 digits)

0.0 mV … 49.99 V

calculated value (consider uncertainty of 3 – pole measurement)

0.00 Ω … 19.9 Ω 20.0 Ω … 299 Ω

±(3 % of reading + 2 digits)

0.0 Ω … 199 Ω

±(8 % of reading + 8 digits)

0.00 Ω … 1.99 kΩ 0.00 Ω … 19.9 kΩ 0.00 Ω … 19.99 kΩ 1.0 mA …7.99 A 10 mA … 49.9 A

±(2 % of reading + 2 digits) ±(3 % of reading + 2 digits) ±(3 % of reading + 2 digits) ±(2 % of reading + 3 digits) ±(8 % of reading + 3 digits)

±(5% of reading + 2 digits) ±(10 % of reading + 2 digits) ±(20 % of reading) calculated value (consider uncertainty of 4 – pole measurement)

SET SPECIFICATION G

Licence key Measurement methods Ground Z 2-pole Ground Z 3-pole Ground Z 4-pole Single/multi/sweep frequency Wenner 4-pole Schlumberger 4-pole Selective (iron clamp) Stakeless 2-clamps Transient Impulse Impedance HF 25 kHz Impedance Step / Touch Voltage potential Low Impedance 4-point Low Resistance 200 mA

2. 8

F P

• • • • • • • • • • • • • •

• • • • • • • • • •

• • • • • •

Accessories 2.40

• • • •

Tower Passive one rod / Flex clamps Tower FOP / 1xFlex clamp Tower FOP / 4xFlex clamp Mono Tower FOP / Flex clamp Measurement accessory Current earth spike, 90 cm, 2 pcs Potential earth spike, 50 cm 2 pcs G clamp Shielded test lead on reel, 75 m Test lead on reel 50 m, 3 pcs (black, green, blue) Test lead, 5 m, 2 pcs (blue, red) Set of test probes, crocodile clip and 2 m test lead, 4 pcs Flex clamp 5 m with 15 m shielded cable

GX • GX1 GX4 •

GP • • Option •

•

4 pcs (GX4) 1 pce (GX1) • • •

Iron clamp, 2 pcs Kelvin clamp with 2,5 m cable, 2 pcs Step Contact Meter Measuring Set

1 pce • • •

ORDERING INFORMATION G

• • • • • • •

All model versions include following accessory: Instrument MI 3290 Current earth spike 90 cm, 2 pcs Potential earth spike 50 cm, 2 pcs Connection lead black 2 m Test lead 5 m blue Test lead 5 m red Test lead 50 m black on cable reel

• • • • • •

• • • • • • • • • • •

Test lead 50 m green on cable reel Test lead 50 m blue on cable reel Shielded test lead 75 m on reel G clamp Set of test probes, crocodile clip and 2 m test lead, 4 pcs Bag for accessories

P MI 3290 GX1 Licence GX Iron clamp A 1018 with 3,5 m test lead Iron clamp A 1019 Flex clamp 5 m with 15 m shielded cable Kelvin clamp with 2,5 m cable, 2 pcs Voltmeter MI 3295M with 2 wire test lead Soft carrying bag Step voltage test plate, 2 pcs NiMH battery cells, type AA, 6 pcs Power supply adapter Bag for accessories

Picture of MI 3290 GX4 set

P MI 3290 GX4 • MI 3290 GX1 • Flex clamp 5 m with 15 m shielded cable, 3 pcs • Bag for accessories

Measuring and Regulation Equipment Manufacturer

P MI 3290 GP • Licence GP • Flex clamp 5 m with 15 m shielded cable • Bag for accessories

Picture of MI 3290 GP set

MI 3290 GF Licence GF Kelvin clamp with 2,5 m cable, 2 pcs Voltmeter MI 3295M with 2 wire test lead Soft carrying bag Step voltage test plate, 2 pcs NiMH battery cells, type AA, 6 pcs Power supply adapter

Picture of MI 3290 GL set

• • • • • • •

Picture of MI 3290 GF set

MI 3290 GL • Licence GL • Iron clamp A 1018 with 3,5 m test lead • Iron clamp A 1019

Accessories 2.40

2. 9

NEW

Earth testers MI 3288 Earth Insulation Tester

High Voltage Insulation / Continuity / Earth / Transformer

MI 3288 Earth Insulation tester is a portable, battery powered test instrument with excellent IP protection (IP 54) and designed for high altitude (300 V CAT III at 4000 m), intended for measurement of earth resistance, specific earth resistance, earth potential, step and touch voltages, insulation resistance and continuity of protection conductors of various energetic and non-energetic objects. Tester enables 4-wire earth resistance measuring method in combination with one clamp, two clamps earth resistance measurement, 4-wire specific earth resistance measurement and TRMS current measurement.

With the option to measure earth potential, step and touch voltage it becomes a very universal tester. Besides the breakdown voltage of overvoltage protection devices can be checked by the instrument. All the results can be saved on the instrument and then downloaded with the help of the PC software Metrel ES Manager to the computer for evaluation and report generation after testing.

MEASURING FUNCTIONS • Earth Resistance 2/3/4 - pole; • Selective Earth Resistance (1 x clamp); • Specific Earth Resistance Ro Wenner and Schlumberger method; • Earth Resistance with 2 iron clamps; • Earth Potential; • Step and touch voltage measurement with external P/S probe; • Insulation resistance with DC voltage from 50 V to 2500 V and PI, DAR calculation; • Varistor test 2,5 kV; • Current measurements with clamps AC; • TRMS voltage and frequency measurements; • Low Ohm measurements with 7 mA and 200 mA DC test current;

2. 10

KEY FEATURES

APPLICATION

• Possibility of performing all main types of earth measurements with a single instrument. • Multi frequency test signal for best noise immunity. • Insulation range: wide range of insulation test voltages from 50 V to 2500 V, resistance measuring range up to 100 GΩ. • Overvoltage category 600 V CAT II, 300 V CAT III; at 4000 m above sea level. • 4.3’’ colour LCD display with touch screen. • Programmable AUTO SEQUENCEs. • High degree of protection: IP 54. • 4-wire 200 mA DC resistance measurement. • Support for single or automated measurements. • Built-in charger and rechargeable Li-Ion batteries as standard accessory. • BT communication with PC, Android tablets and smart phones via built-in BT. • PC SW Metrel ES Manager for measurement pre and post processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing.

• Initial and periodic testing of domestic and industrial installations; • Industrial areas, smaller buildings, installation in mining.

Accessories 2.40

STANDARDS Safety • EN 61010 - 1 • EN 61010 - 2 - 030 c • EN 61010 - 2 - 032 • EN 61010 - 031 Functionality • EN 61557 - 2 • EN 61557 - 4 • EN 61557 - 5 Electromagnetic compatibility • EN 61326 Other reference standards • IEC/EN/HD 60364 • AS/NZ 3018 • CEI 64.8 • HD 384 • BS 7671 • VDE 0413

TECHNICAL DATA

Continuity 200 mA of PE conductor with polarity change Low resistance continuity measurement, test current 7 mA (continuous measurement)

Earth resistance 2/3/4-wire method Test frequency 55 – 164 Hz

Earth resistance 4-wire method with one current clamp - Selective

2-clamp earth resistance measurement Specific earth resistance Ro Wenner and Schlumberger method

Earth Potential - voltage

Step and Touch Voltage TRMS Voltage DC Frequency Current with Iron clamp A 1281

Varistor Test Measuring category Protection class COM port Display Degree of protection Power supply Dimensions Weight

STANDARD SET MI 3288 • Instrument Earth-Insulation Tester • Battery pack 7,2V 4400mAh • Power supply adapter 12V/3A • 2,5 kV Test lead, 2 x 1,5 m • Test lead, green, 1,5 m • Test probe, 2pcs (red, black) • Crocodile clip 4 pcs (black, blue, green, red) • Soft carrying bag • USB cable • PC SW Metrel ES Manager BASIC Licence • Short Instruction manual

Measuring range Resolution Accuracy 0 kΩ … 999 kΩ 1 kΩ ±(3 % of reading + 3 digits) 1.00 MΩ ... 9.99 MΩ 0.01 MΩ 10.0 MΩ ... 99.9 MΩ 0.1 MΩ 100 MΩ ... 999 MΩ 1 MΩ 1.00 GΩ ... 9.99 GΩ 10 MΩ ±(5 % of reading + 3 digits) 10.0 GΩ ... 99.9 GΩ 100 MΩ ±(15 % of reading + 1 digits) 0.020 Ω … 1.999 Ω 0.001 Ω ±(1 % of reading + 2 digits) 2.00 Ω … 19.99 Ω 0.01 Ω 20.0 Ω … 999.9 Ω 0.1 Ω 1.000 kΩ … 1.999 kΩ 1Ω 0.0 Ω … 199.9 Ω 0.1 Ω ±(0,5 % of reading + 5 digits) 200 Ω … 1,999 kΩ 1Ω 2.00 kΩ … 19.99 kΩ 10 Ω 20.0 kΩ … 199.9 kΩ 100 Ω 200 kΩ … 999 kΩ 1 kΩ ±(2 % of reading + 5 digits) 0.010 Ω … 1.999 Ω 0.001 Ω ±(3 % of reading + 3 digits) 2.00 Ω … 19.99 Ω 0.01 Ω 20.0 Ω … 199.9 Ω 0.1 Ω 200 Ω … 999 Ω 1Ω 1.000 kΩ … 1.999 kΩ 0.001 kΩ 2.00 kΩ … 19.99 kΩ 0.01 kΩ 0.010 Ω … 1.999 Ω 0.001 Ω ±(8 % of reading + 3 digits) 2.00 Ω … 19.99 Ω 0.01 Ω 20.0 Ω … 199.9 Ω 0.1 Ω 200 Ω … 999 Ω 1Ω 1.000 kΩ … 1.999 kΩ 0.001 kΩ 2.00 kΩ … 19.99 kΩ 0.01 kΩ 2.00 Ω … 9.99 Ω 0.01 Ω ±(5 % of reading + 2 digits) 10.0 Ω … 49.9 Ω 0.1 Ω ±(10 % of reading + 2 digits) 50 Ω … 100 Ω 1Ω ±(20 % of reading) 0.00 Ωm … 19.99 Ωm 0.01 Ωm calculated value (consider uncertainty of 4 – pole 20.0 Ωm … 199.9 Ωm 0.1 Ωm measurement) 200 Ωm … 999 Ωm 1 Ωm 1.000 kΩm … 1.999 kΩm 0.001 kΩm 2.00 kΩm … 19.99 kΩm 0.01 kΩm 20.0 kΩm … 199.9 kΩm 0.1 kΩm 200 kΩm … 999 kΩm 1 kΩm 1.0 MΩm … 1.99 MΩm 10 kΩm 0.00 mV … 99.99 mV 0.01 mV ±(1 % of reading + 3 digits) 100.0 mV … 999.9 mV 0.1 mV 1.000 V … 9.999 V 1 mV 10.00 V … 49.99 V 10 mV 0.1 V … 199.9 V 0.1 V calculated value 200 V … 999 V 1V 0.000 V … 9.999 V 0.001 V Range: 15 ... 99 Hz ±(0.5 % of reading + 3 digits) 10.00 V … 99.99 V 0.01 V Range: 100 ... 399 Hz ±(1 % of reading + 3 digits) 100.0 V … 749.9 V 0.1 V Range: 400 ... 1200 Hz ±(5 % of reading + 3 digits) 0.000 V … 9.999 V 0.001 V ±(0.5 % of reading + 3 digits) 10.00 V … 99.99 V 0.01 V 100.0 V … 999.9 V 0.1 V 15.00 Hz … 99.99 Hz 0.01 Hz ±(0.2 % of reading + 1 digits) 100.0 Hz … 999.9 Hz 0.1 Hz 1000 Hz … 1200 Hz 1 Hz 10 mA … 749 mA 1 mA ±(2.5 % of reading + 3 digits) 0.10 A … 7.49 A 0.01 A 2.0 A … 99.9 A 0.1 A 100 A … 149 A 1A 20 A … 999 A 1A 0.0 V .... 99.9 V 0.1 V ±(1 % of reading + 3 digits) 100 V .... 999 V 1V 1.00 kV .... 2.50 kV 10 V 300 V CAT IV; derate to 600 V CAT II; 300 V CAT III at 4000 m ASL Double insulation BT, USB 4.3’’ colour LCD display with backlight and touch screen IP 54 7.2 V (4400 mAh Li-Ion battery pack) 250 x 110 x 160 mm 1.6 kg

• Instruction manual (on CD) • Calibration certificate MI 3288 – 20 m • MI 3288 ST • Earth test set, 20 m (test lead, 4 x 1 m; 2 x test lead, 20 m; 2 x test lead, 4,5 m; 4 x earth test rod)

Picture of MI 3288 - 50 m set

FUNCTION Insulation resistance Riso Un = 2,5 kV

MI 3288 – 50 m • MI 3288 ST • Earth test set, 50 m (test lead, 4 x 1 m; 2 x test lead, 50 m; 2 x test lead, 4,5 m; 4 x earth test rod)

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 11

High Voltage Insulation / Continuity / Earth / Transformer

Earth testers MI 3295 Step Contact Voltage Measuring System The MI 3295 Step Contact Voltage Measuring System is a voltage measuring system intended for testing and verification of protective earthing of power stations, substation and other power systems. The system consists of Station for current generation and autonomous voltage Meter. Due to high test current (up to 55 A) and effective noise cancellation the MI 3295 ensures very accurate and stable measurements of Step and Contact Voltages with the resolution down to 10 µV. A few voltmeters can be used simultaneously for faster analysis of voltage distribution around the tested object. All test results and parameters can be saved into the instrument’s memory for further downloading, analysis and test report printing with the help of the PC SW Metrel ES Manager or HVLink PRO.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• • • • • •

• Accurate: high accuracy of the measurements due to a high current of up to 50 A and effective suppression of noise. • Noise immunity: excellent immunity even against changing earth currents. • Autonomous Step Voltage meter: no need for long potential leads; a few meters can be used simultaneously. • Safe: high safety due to low output voltage (55 V). • Low weight: the weight of the Station is 29.5 kg only. • Memory: up to 1000 test results can be saved into the 3-level internal memory of the system. • PC SW Metrel ES Manager or HVLink PRO included in the standard set enables downloading and analysis of results and printing of test reports.

Measurement of protective earthing of: • Power stations; • Substations; • Distribution towers; • Other power systems.

Step voltage; Contact voltage; Specific earth resistance; Earth resistance; Potential; Leakage current.

2. 12

Accessories 2.40

STANDARDS Functionality • ANSI/IEEE Std 81; • EN 61557-5; • RAT 2008; • HD 673 N4 Electromagnetic compatibility • EN 61326 Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION Step voltage, Contact voltage (measuring range Um)

Step voltage, Contact voltage (calculated measuring range U) Potential (MI 3295M)

Test current Test voltage Test frequency Current Resistance to earth

Specific earth resistance

Open circuit voltage Test current Test frequency Current (MI 3295M) Iron clamp A 1018 Current (MI 3295M) Flex clamp A 1587

STATION Power supply Communication port Memory Overvoltage category Measuring category Protection degree Display Dimensions Weight METER Power supply Communication ports Memory Measuring category Protection degree Display Dimensions Weight

Measuring range 0.01 … 19.99 mV 20.0 … 199.9 mV 200 … 1999 mV 2.00 … 19.99 V 20.0 V … 59.9 V 0.0 … 199.9 V 200 … 999 V 0.01 … 19.99 mV 20.0 … 199.9 mV 200 … 1999 mV 2.00 … 19.99 V 20.0 … 59.9 V 55 A max < 55 V 55 Hz 0.00 … 9.99 A 10.0 … 99.9 A 0.001 … 1.999 Ω 2.00 … 19.99 Ω 20.0 … 99.9 Ω 100.0 … 199.9 Ω 0.00 … 9.99 Ωm 10.0 … 99.9 Ωm 100 … 999 Ωm 1.00 k … 9.99 kΩm 10.0 k … 99.9 kΩm < 50 VAC < 7.5 A 55 Hz 1.0 … 99.9 mA 100 … 999 mA 1.00 … 9.99 A 10.0 … 99.9 mA 100 … 999 mA 1.00 … 9.99 A 10.0 … 30.0 A 10.0 … 50.0 A

Resolution 0.01 mV 0.1 mV 1 mV 0.01 V 0.1 V 0.1 V 1V 0.01 mV 0.1 mV 1 mV 0.01 V 0.1V

Accuracy ±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) ±(2 % of reading + 2 digits) calculated value*

0.01 A 0.1 A 0.001 Ω 0.01 Ω 0.1 Ω 0.1 Ω 0.01 Ωm 0.1 Ωm 1 Ωm 10 Ωm 100 Ωm

±(3 % of reading + 5 digits) ±(3 % of reading + 3 digits) ±(2 % of reading + 5 digits) ±(2 % of reading + 5 digits) ±(2 % of reading + 5 digits) ±5 % of reading) Calculated value, consider accuracy of Resistance to earth function.

0.1 mA 1 mA 0.01 A 0.1 mA 1 mA 0.01 A 0.1 A 0.1 A

±(2 % of reading 3 dig)

±(2 % of reading + 2 dig)

±(8 % of reading + 5 dig)

230 V / 50 or 60 Hz RS232 1000 memory locations CAT II / 300 V CAT IV / 50 V IP 30 LCD with backlight (128 x 64 dots) 563 x 275 x 257 mm 29.5 kg 6 x 1.2 V rechargeable batteries, type AA USB, RS232 1500 memory locations CAT IV / 50 V IP 40 LCD with backlight (128 x 64 dots) 230 x 103 x 115 mm 1.3 kg

*Displayed Step / Contact voltage is obtained on base of calculation: US = Umeas·Ifault / Igen; UC = Umeas·Ifault / Igen; Ifault (selectable): 1 A ... 200 kA

MI 3295 • Instruments MI 3295M and MI 3295S • Mains cable • Step voltage probe (25 kg), 2 pcs: A 1353 • Current earth spike A 1529, 2 pcs • Potential earth spike, 60 cm A 1629, 2 pcs • Current test lead, 50 m, black, 10 mm2, with crocodile clip, on reel, A 1325 • Current test lead, 10 m, black, 10 mm2, with crocodile clip, A 1392 • G clamp A 1530 • Test lead, black, 2 x 3 m • Test lead, green, 10 m

• • • • • • • • • • • •

Test lead, black, 1.5 m Test lead, green, 4 m Test lead, red, 50 m Connection lead with crocodile clip, red, 1 m Crocodile clip, 2 pcs RS232 cable USB cable Soft carrying bag, 2 pcs Soft carrying neck belt NiMH battery cells, type AA, 6 pcs Power supply adapter CD with instruction manual and PC SW Metrel ES Manager and HVLink PRO • Instruction manual • Calibration certificate

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

Picture of MI 3295 set

STANDARD SET

2. 13

High Voltage Insulation / Continuity / Earth / Transformer

Transformer testers MI 3280 Digital Transformer Analyser The MI 3280 Digital Transformer Analyser is a portable, battery (Li-ion) powered test instrument intended for diagnosing of turn ratio, phase deviation, excitation current and winding resistance of single and three phase transformers. It has an excellent IP protection: IP65 (case closed), IP54 (case open) allowing the use of the instrument in harsh environments. The operation is straightforward and clear to enable the user to operate the instrument without the need for special training. For advanced users the AUTO SEQUENCES and visual tests are available.

MEASURING FUNCTIONS Available functions and features offered by the Digital Transformer Analyser: • Turn ratio measurement of single and three phase transformers; • Phase deviation between high voltage and low voltage winding; • Excitation current; • Winding resistance measurement of single and three phase transformers (Power Transformers up to 1,6 MVA).

• • • • •

KEY FEATURES

instrument. PC software that is supplied as a part of standard set enables transfer of measured results to PC where they can be analysed or printed. Built-in help screens for referencing on site. Autotest sequences. Built-in charger and rechargeable batteries as standard accessory. BT communication with PC, Android tablets and smart phones via built-in BT. PC SW Metrel ES Manager for creation of test structures and uploading, downloading of test results, autotest editor and report creation. High degree of protection IP 65 (case closed), IP 54 (case open).

• High resolution colour touch screen, 4.3” TFT. • The operation is straightforward and clear to enable the user to operate the instrument without the need for special training. • Test results can be stored on the

•

2. 14

Accessories 2.40

APPLICATION • Three phase and single phase power transformers. • Voltage transformers. • Current transformers.

STANDARDS Functionality • C57.12.70 • IEC 60076-1 Electromagnetic compatibility • EN 61326 Safety • EN 61010 - 1 • EN 61010 - 2 - 030 • EN 61010 - 2 - 033 • EN 61010 - 031 Li – ion battery pack • IEC 62133

TECHNICAL DATA

Excitation voltage 80 V

Excitation voltage 40 V TURN RATIO r, rA, rB, rC Excitation voltage 10 V

Excitation voltage 5V

Excitation voltage 1V

EXCITATION CURRENT i, iA, iB, iC

Test frequency 55, 65 or 70 Hz

PHASE DEVIATION fi, jA, jB, jC

Test frequency 55, 65 or 70 Hz

WINDING RESISTANCE R, RA, RB, RC

Test current 10 mA ... 1000 mA

GENERAL

Measuring range

Resolution

Accuracy

0.8000 ... 9.9999

0.0001

±(0.2% of reading + 2 digits)

10.000 ... 99.999

0.001

±(0.2% of reading + 2 digits)

100.00 ... 999.99

0.01

±(0.2% of reading + 2 digits)

1000.0 ... 1999.9

0.1

±(0.5% of reading + 2 digits)

2000.0 ... 3999.9

0.1

±(0.5% of reading + 2 digits)

4000.0 ... 8000.0

0.1

±(1.0% of reading + 2 digits)

0.8000 ... 9.9999

0.0001

±(0.2% of reading + 2 digits)

10.000 ... 99.999

0.001

±(0.2% of reading + 2 digits)

100.00 ... 999.99

0.01

±(0.2% of reading + 2 digits)

1000.0 ... 1999.9

0.01

±(0.5% of reading + 2 digits)

2000.0 ... 3999.9

0.1

±(0.5% of reading + 2 digits)

4000.0 ... 8000.0

0.1

n/a

0.8000 ... 9.9999

0.0001

±(0.2% of reading + 2 digits)

10.000 ... 99.999

0.001

±(0.2% of reading + 2 digits)

100.00 ... 999.99

0.01

±(0.5% of reading + 2 digits)

1000.0 ... 8000.0

0.1

n/a

0.8000 ... 9.9999

0.0001

±(0.2% of reading + 2 digits)

10.000 ... 99.999

0.001

±(0.2% of reading + 2 digits)

100.00 ... 999.99

0.01

±(0.5% of reading + 2 digits)

1000.0 ... 8000.0

0.1

n/a

0.8000 ... 9.9999

0.0001

±(0.2% of reading + 2 digits)

10.000 ... 99.999

0.001

±(0.5% of reading + 2 digits)

100.00 ... 999.99

0.01

n/a

1000.0 ... 8000.0

0.1

n/a

0.10 mA ... 9.99 mA

0.01 mA

±(2 % of reading + 0.20 mA)

10.0 mA ... 99.9 mA

0.1 mA

±(2 % of reading + 2 digits)

100 mA ... 999 mA

1 mA

±(2 % of reading + 2 digits)

1.00 A ... 1.10 A

0.01 A

±(2 % of reading + 2 digits)

-180.00 ... 180.00 °

0.01°

±(0.05°)

1.0 mΩ ... 999.0 mΩ

0.1 mΩ

±(2 % of reading + 3 digits)

1.000 Ω ... 9.999 Ω

0.001 Ω

±(2 % of reading + 2 digits)

10.00 Ω ... 99.99 Ω

0.01 Ω

±(2 % of reading + 2 digits)

100.0 Ω ... 999.9 Ω

0.1 Ω

±(2 % of reading + 2 digits)

Battery power supply

14.4 V DC (4.4Ah Li-ion)

Battery charging time

typical 4.5 h (deep discharge)

Mains power supply

90-260 VAC, 45-65 Hz, 100 VA (300 V CAT II)

Protection classification

reinforced insulation

Measuring category

50 V CAT IV

Pollution degree

Degree of protection

IP 65 (case closed), IP 54 (case open)

Display

Colour TFT display, 4.3 inch, 480 x 272 pixels

Dimensions

360 x 160 x 330 mm

Weight

8.8 kg, (with battery and accessories)

STANDARD SET MI 3280 • Instrument MI 3280 • 4 wire test lead with banana, 4 pcs • Large Kelvin test crocodile, 8 pcs • USB cable

• • • • •

Mains cable Soft carrying bag Metrel ES Manager BASIC Licence* Instruction manual Calibration certificate

*Metrel ES Manager can be downloaded free of charge from Metrel Web server.

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

Picture of MI 3280 set

Function

2. 15

2. 16

Accessories 2.40

Continuity testers Selection Guide for Continuity Insulation Testers FEATURES

Description

MI 3252 MicroOhm 100A

MI 3250 MicroOhm 10A

MI 3242 MicroOhm 2A

MEASUREMENTS

Measuring range

1 nΩ ... 20 Ω

100 nΩ ... 2 kΩ

1 µΩ ... 200 Ω

No. of ranges

Current into load

2 mΩ at 100 A

200 mΩ at 10 A

1 Ω at 2 A

Highest resolution

1 nΩ

0.1 µΩ

1 µΩ

Basic accuracy

0.25 %

Test current

100 A, 50 A, 10 A, 1 A, 100 mA 10 A, 1 A, 100 mA, 10 mA, 1 mA2 A, 100 mA, 10 mA

Measurement modes

Single, Continuous

Single, Automatic, Inductive, Continuous

Test method

4-wire, unidirectional

4-wire, Bidirectional

•

OTHER FEATURES

Auto ranging PASS / FAIL indication

•

Temperature compensation

•

COMMUNICATION PORTS

RS232

•

USB

•

MEMORY, SOFTWARE

Memory

•

Number of memory locations

1000 / 2 levels

1000

1500

Software

HVLink PRO

Display type

Graphical LCD

Backlight

•

Safety category

CAT IV / 50 V CAT II / 300 V

CAT IV / 300 V CAT II / 300 V

CAT IV / 300 V CAT III / 600 V

Rechargeable batteries

•

Battery

12 V / 12 Ah

6 x NiMH, type HR14

6 x NiMH, type AA

•

• •

GENERAL DATA

Built-in battery charger Low battery indication

•

Mains voltage

115 / 230 V AC, 50 / 60 Hz, 200 VA

90-260 V AC, 45-65 Hz, 50 W

Weight

11.8 kg

2.8 kg

0.8 kg

Dimensions (mm)

410 x 175 x 370

310 x 130 x 250

140 x 80 x 230

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 17

High Voltage Insulation / Continuity / Earth / Transformer

Continuity testers MI 3252 MicroOhm 100A The MI 3252 MicroOhm 100A is portable low resistance ohmmeter used to measure low contact resistances of circuit breakers, switches and busbar joints using test current from 100 mA to 100 A. Used 4-lead Kelvin testing method ensures very high accuracy of results (0.25%) due to elimination of test leads resistance. The instrument can be powered from both mains supply and internal battery. PC SW HVLink PRO supplied as a standard accessory enables downloading, analysis and export of test results and printing of test reports.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Resistance measurement with adjustable test current (100 mA … 100 A); • Voltage drop measurement.

• Accurate: 1 nΩ best resolution with 0.25% accuracy. • Bar graph: on screen resistance bar graph. • Battery powered: the instrument enables measurements with 100 A for up to 10 minutes when powered from internal battery only. • Safe: sustain external voltages in case of wrong connection, protection level (CAT IV / 50 V); automatically detects continuity in current circuit. • Single and continuous measuring modes. • Custom limits: the limits can be set for PASS or FAIL evaluation of test result. • Portable: rugged carrying case with a handle and lightweight design (less than 12 kg) enable easy moving the instrument between sites. • High protection degree: IP 64. • Memory: built-in memory enables storage of up to 1000 test results. • Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the HVLink PRO software.

Measurement the resistance of: • High, middle and low voltage circuit breakers; • High, middle and low voltage disconnecting switches; • High current busbar joints; • Cable splices; • Welding joints.

2. 18

Accessories 2.40

STANDARDS Functionality • IEC 62271-100; • IEC 62271-1; • ANSI C37.09; • ASTM B 539; • NMEA AB 4-1996; • El Real Decreto 223/2008 Electromagnetic compatibility • IEC 61326-1 Class B Safety • EN 61010-1;

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Current

Resistance

10.000 … 199.999 μΩ 0.20000 … 1.99999 mΩ 2.0000 ... 19.9999 mΩ 20.000 … 199.999 mΩ 0.20000 … 1.99999 Ω 2.0000 … 19.9999 Ω

1 nΩ 10 nΩ 100 nΩ 1 μΩ 10 μΩ 100 μΩ

±0.25 % of reading

100 A 100 A / 50 A 50 A / 10 A 1 / 10 A 1 A / 100 mA 100 mA

FUNCTION

Measuring range

Resolution

Accuracy

Current

Voltage

200 μΩ 2 mΩ

1 μV 10 μV 10 μV 0.1 mV 0.1 mV 0.1 mV 0.1 mV 0.1 mV 0.1 mV 0.1 mV

±0.25 % of reading

100 A 100 A 50 A 50 A 10 A 1A 10 A 1A 100 mA 100 mA

20 mΩ 200 mΩ 2Ω 20 Ω

1.000 mV … 20.000 mV 20.00 mV … 200.00 mV 10.00 mV … 100.00 mV 100.0 mV … 1.0000 V 20.0 mV … 200.0 mV 200.0 mV … 2.0000 V 20.0 mV … 200.0 mV 200.0 mV … 2.0000 V 20.0 mV … 200.0 mV 200.0 mV … 2.0000 V

Power supply

230 / 115 VAC

Battery

12 VDC / 12 Ah

Overvoltage category

CAT IV / 50 V

Display

320 x 240 LCD with backlight

Communications

RS 232 and USB

Memory

512 kB (1000 test results)

Dimensions

410 x 175 x 370 mm

Weight

11.8 kg

STANDARD SET

• • • •

Measuring and Regulation Equipment Manufacturer

Picture of MI 3252 set

MI 3252 • Instrument MicroOhm 100A • Current test lead with crocodile clip, 5 m, 25 mm2, 2 pcs • Potential test lead, 5 m, 2 pcs (red, black) • Test probe, 2 pcs (red, black) • Crocodile clip, 2 pcs (red, black) • Mains cable • RS232 cable • USB cable

Bag for accessories PC SW HVLink PRO Instruction manual Calibration certificate

Accessories 2.40

2. 19

High Voltage Insulation / Continuity / Earth / Transformer

Continuity testers MI 3250 MicroOhm 10A The MI 3250 MicroOhm 10A is portable low resistance ohmmeter for measuring low resistances of breakers and switches, busbars, cable joints, small to medium sized transformer and motor windings for industrial application, etc., with test current up to 10 A. The used 4-lead Kelvin testing method together with automatic bidirectional procedure ensure very high accuracy of test results (0,25%). The instrument can be powered by mains or internal rechargeable batteries. Test results can be stored on the instrument and with PC software HVLink PRO that is supplied as a part of standard set enables transfer of measured results to PC where they can be analysed or printed.

MEASURING FUNCTIONS • Bidirectional resistance measurement from 0,1 µΩ up to 2000 Ω with test current up to 10 A; • Temperature compensation (with optional temperature probe).

KEY FEATURES • Accurate: 0.1 nΩ best resolution with 0.25% accuracy. • Bar graph: on screen resistance bar graph. • Battery powered: more than 1000 measurements with 10 A test current can be performed when powered by internal battery only. • Safe: High overvoltage category CAT IV / 300 V.

2. 20

• Four measuring modes: Automatic, single, continuous and inductive. • Automatic thermal EMF elimination: with automatic bidirectional measurement. • Temperature compensation: measured resistance can be adjusted according to ambient temperature, which can be entered manually or measured by external probe. • Custom limits: limits can be set for PASS/FAIL evaluation of test results. • Portable: lightweight 3 kg design with carry handle and shoulder strap. • Memory: built-in memory enables storage of up to 1000 test results. • Downloadable: stored test results can be via RS232 or USB interface transferred to the PC with installed HVLink PRO software, which enables downloading, review, analyses and printing of the test results.

Accessories 2.40

APPLICATION Measurement the resistance of: • Bus bar joints; • Motor and transformer windings; • Cables; • Fuses; • Aircraft frame bonds; • Rail and pipe bonds; • Lightning conductor bonding.

STANDARDS Electromagnetic compatibility • IEC 61326-1 Safety • EN 61010-1; • EN 61010-031;

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Current

Resistance

1.9999 mΩ 19.999 mΩ 199.99 mΩ 1.9999 Ω 19.999 Ω 19.999 Ω 199.99 Ω 199.99 Ω 1.9999 kΩ

0.1 µΩ 1 µΩ 10 µΩ 100 µΩ 1 mΩ 10 mΩ 10 mΩ 100 mΩ 1Ω

±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(0.25 % of reading + 0.01 % FS) ±(1 % of reading + 0.1 % FS) ±(0.25 % of reading + 0.01 % FS) ±(1 % of reading + 0.25 % FS) ±(1 % of reading + 0.25 % FS)

10 A 10 A/1 A 10 A/1 A/100 mA 1 A/100 mA/10 mA 100 mA/10 mA 1 mA 10 mA 1 mA 1 mA

Power supply (mains voltage)

90 ... 260 VAC / 60 VA

Power supply (batteries)

6 x 1.2 V NiMH 3500 mAh batteries, type C

Operation

> 1000 single measurements

Overvoltage category

CAT IV / 300 V

Protection class

Double insulation

Display

320 x 240 LCD with backlight

Communication

RS232 and USB

Memory

1000 memory locations

Dimensions

310 x 130 x 250 mm

Weight

2.8 kg

STANDARD SET

• • • •

Measuring and Regulation Equipment Manufacturer

Picture of MI 3250 set

MI 3250 • Instrument MI 3250 MicroOhm 10A • Large Kelvin test clip, 2 pcs • Test cable with Kelvin Probe, 2 pcs • Test cable, 2.5 m, 4 pcs (2 x black, 2 x red) • Crocodile clip, 4 pcs (2 x black, 2 x red) • Test probe, 2 pcs (black) • Mains cable • USB cable and RS232 cable • NiMH rechargeable batteries, type C, 6 pcs

PC SW HVLink PRO Bag for accessories Instruction manual Calibration certificate

Accessories 2.40

2. 21

High Voltage Insulation / Continuity / Earth / Transformer

Continuity testers MI 3242 MicroOhm 2A MI 3242 MicroOhm 2 A is a portable low resistance ohmmeter used to measure low resistances of switches, relays, connectors, bus bars, power distribution cable joints, motor & generator winding, power transformers, power inductors, rail track joints, wire and cable resistance, welding joints for industrial application, etc., with test current up to 2 A.

MEASURING FUNCTIONS • Bidirectional resistance measurement from 1 μΩ up to 199,9 Ω with test current up to 2 A.

•

KEY FEATURES • Four measuring modes: Automatic, single, continuous and inductive. • Automatic thermal EMF elimination: with automatic bidirectional measurement. • Accurate: 1 µΩ best resolution with 0.25% accuracy. • Noise rejection: 50 Hz / 60 Hz ripple detection and rejection. • Battery powered: more than 800 measurements of 500 mΩ load ∞ 2

2. 22

•

• • •

A test current & 15 s measurement duration. Safe: High overvoltage protection (CAT III / 600 V) allows measurement in substations and other points with low line resistance. Internal protection circuit protects user and instrument from inadvertent connection to lines. Custom limits: Pre-programmed limits with PASS/FAIL evaluation of measurement result and bright REEN/ RED indicators providing visual evaluation of the results. Portable: Lightweight portable design. Memory: Up to 1500 test results with timestamp can be stored in internal memory. Downloadable: PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

Accessories 2.40

APPLICATION Measurement the resistance of: In inductive mode: • Motor & generator winding; • Power transformer; • Power inductors; • Wire & cable resistance.

STANDARDS Electromagnetic compatibility • EN 61326 Class A Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Current

Resistance

9.999 mΩ

1 µΩ

±(0.25 % of reading + 2 digits)

99.99 mΩ

10 µΩ

999.9 mΩ

100 µΩ

99.99 mΩ

10 µΩ

999.9 mΩ

100 µΩ

9.999 Ω

1 mΩ

19.99 Ω

10 mΩ

999.9 mΩ

100 µΩ

9.999 Ω

1 mΩ

99.99 Ω

10 mΩ

199.9 Ω

100 mΩ

0 ... 49.9

0.1 V

50 ... 550

10.0 ... 99.9

0.1 Hz

100 ... 500

1 Hz

Voltage Frequency

10 mA

±(2 % of reading + 2 digits)

Power supply (batteries)

9 VDC (6 x 1.5 V battery or accu, size AA)

Operation

> 800 single measurements

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

Display

128 x 64 dots matrix display with backlight

Communication

RS232 and USB

Memory

1500 memory locations

Dimensions

140 x 80 x 230 mm

Weight

0.8 kg

STANDARD SET

• • • •

±(0.2 % of reading + 1 digit)

Soft carrying bag PC SW HVLink PRO Instruction manual Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3242 set

MI 3242 • Instrument MI 3242 MicroOhm 2A • Test cable with Kelvin probe, 2 pcs • Test cable 4 wire, 2.5 m • Crocodile clip, 4 pcs (2x black, 2x red) • Test probe, 2 pcs (black) • Power supply adapter • 1.2 V NiMH rechargeable battery, 6pcs • RS232 serial cable • USB cable

100 mA

Accessories 2.40

2. 23

High voltage insulation testers Selection Guide for HV Insulation Testers FEATURES

Description

MI 3210 TeraOhmXA 10 kV

MI 3209 TeraOhmLT 10 kV NEW

MEASUREMENTS

Test voltage range

50 VDC … 10 kVDC

Voltage steps

50 V

Insulation resistance measuring range

20 TΩ

10 TΩ

Calculation of DD, DAR, PI

•

Withstanding voltage test

•

Voltage ramp test

•

Leakage current measurement

•

Capacitance measurement

•

Short circuit / charge current

5 mA

Voltage measurement AC / DC

up to 600 V

Custom tests

•

Programmable timer

•

Automatic discharge after test

•

Graph R(t)

•

Bar graph

•

Auto adjustment function

•

Auto ranging

•

Audible warnings

•

Guard terminal

•

Shielded test leads

•

COMMUNICATION PORTS

USB/ RS232

•/•

BLOETOOTH

•

MEMORY, SOFTWARE

Memory

•

Number of memory locations

1000

Software

HVLink PRO

Option (HVLink PRO)

Display type

Graphical LCD

Backlight

•

Safety category

CAT IV / 600 V

Rechargeable batteries

•

Built-in battery charger

•

Low battery indication

•

Battery life (no load connected)

4 h at 10 kV

Weight

6.5 kg

Dimensions (mm)

345 x 160 x 335

OTHER FEATURES

GENERAL DATA

2. 24

Accessories 2.40

MI 3205 TeraOhmXA 5 kV

MI 3201 TeraOhm 5 kV Plus

MI 2077 TeraOhm 5 kV

MI 3202 GigaOhm 5 kV

MI 3121H Insulation/Continuity

50 VDC … 5 kVDC

250 VDC … 5 kVDC

100 VDC … 2.5 kVDC

50 V

25 V

50 V

250 V; 500 V; 1 kV; 2.5 kV; 5 kV 100 V; 250 V; 500 V; 1 kV; 2.5 kV

15 TΩ

10 TΩ

5 TΩ

1 TΩ

•

6 mA

5 mA

1.4 mA

5 mA

3 mA

up to 600 V

up to 550 V

•

Option

•

•/•

Option / •

•

4 MB

1000

HVLink PRO

Option (HVLink PRO)

Option (TeraLink)

Graphical LCD

Custom LCD

•

CAT IV / 600 V

CAT III / 600 V

CAT IV / 600 V

CAT III / 600 V; CAT IV / 300 V

•

Option

•

7 h at 5 kV

4 h at 5 kV

13 h

6.5 kg

3 kg

2.1 kg

3 kg

850 g

345 x 160 x 335

310 x 130 x 250

265 x 110 x 185

310 x 130 x 250

140 x 80 x 230

100 GΩ •

• •

•

Measuring and Regulation Equipment Manufacturer

1500 Option (EuroLink PRO)

Accessories 2.40

2. 25

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 3210 TeraOhmXA 10 kV MI 3210 TeraOhm XA 10 kV is a portable, battery or mains powered test instrument with excellent IP protection (IP65), intended for diagnosing of Insulation Resistance by using high DC test voltages of up to 10 kV. Because of its robustness (CAT IV protection) and high immunity to radiated RF fields it is best suited for industrial environment.

MEASURING FUNCTIONS • • • •

Insulation Measurement; Diagnostic Test (PI, DAR, DD); Step Voltage Test; Withstanding Voltage Test (DC) up to 10 kV; • Voltage and frequency measurement up to 550 V TRMS.

• • • • • •

completion of measurement. Guard terminal. High voltage breakdown detection. Custom defined tests. Auto adjustment function. Measurement results in numerical and graphical form. PC software HVLink PRO for downloading and analysing of the test results and test report printing. Isolated RS232 and USB communication ports, BT interface. High quality accessories including shielded test leads in standard set. High EM interferences protection: Input AC current noise rejection (1 mA∞600 V) and additional averaging of the result (5, 10, 30, 60). CAT IV / 600 V. Mains and rechargeable battery power supply.

KEY FEATURES

•

• Insulation resistance up to 20 TΩ. • Adjustable test voltage (50 V...10 kV) 50 V and 100 V step. • Programmable timer. • Capacitance measurement. • Charging rate for capacitive load < 3 s / µF at 10 kV. • Automatic discharge of test object after

•

2. 26

Accessories 2.40

•

• •

APPLICATION • Power transformers; • Measuring transducers in distribution networks; • Testing insulation resistance of rotating machinery and cables; • Production line periodic testing and maintenance; • Troubleshooting and analysis of all kinds of insulation problems; • High voltage generators; • Surge arrestors.

STANDARDS Electromagnetic compatibility • EN 61326 class A Safety • EN 61010-1 (instrument); • EN 61010-2-030; • EN 61010-2-033; • EN 61010-031 (accessories)

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance

0.01 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ 1.0 TΩ … 9.9 TΩ 10 TΩ … 20 TΩ

10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ 100 GΩ 1 TΩ

±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(15% of reading + 3 digits)

Test voltage

0 V … 999 V 1.00 kV… 9.99 kV 10.0 kV … 14.0 kV

1V 10 V 100 V

±(5% of reading + 3 digits)

Insulation leakage current

1.00 mA … 5.00 mA 100 μA … 999 μA 10.0 μA … 99.9 μA 1.00 μA … 9.99 μA 100 nA ... 999 nA 10.0 nA .. 99.9 nA 0.00 nA … 9.99 nA

10 µA 1 µA 100 nA 10 nA 1 nA 100 pA 10 pA

Dielectric absorption ratio (DAR)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Polarization index (PI)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Dielectric discharge (DD)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Voltage AC/DC

5.0 V … 99.9 V 100 V … 550 V

0.1 V 1V

±(2% of reading + 2 digits)

Frequency

10 Hz … 500 Hz

0.1 Hz

±(0.2% of reading + 1 digits)

Capacitance

20.0 nF … 999 nF 1.00 µF … 9.99 µF 10.0 µF … 50.0 µF

1 nF 10 nF 100 nF

±(5% of reading + 2 digits)

Power supply

12 V DC (3.4 Ah Lead – Acid)

Display

320 x 240 dots matrix display with backlight

Overvoltage category

CAT IV / 600 V

Protection class

Double insulation

COM port

RS232, USB and Bluetooth

Dimensions

345 x 160 x 335 mm

Weight

6.5 kg

±(5% of reading + 3 digits)

±(10% of reading + 0.15 nA)

STANDARD SET

Picture of MI 3210 ST set

MI 3210 Standard set (ST) • Instrument MI 3210 TeraOhmXA 10 kV • 10 kV shielded test lead with probe, 2 m • 10 kV shielded test lead, 2 m, 2 pcs (black, red) • 10 kV crocodile clip, 2 pcs (black, red) • Guard test lead, green, 2 m • Crocodile clip, green • Mains cable • PC SW HVLink PRO with USB and RS 232 cable • Handbook “Guide to modern insulation testing” on storage media • Instruction manual on storage media • Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3210 EU set

MI 3210 Euro set (EU) • Instrument MI 3210 TeraOhmXA 10 kV • 10 kV shielded test lead with probe, 2 m • Large HV Crocodile with shielded cable, red, 2.5 m • Large HV Crocodile with shielded cable, black, 2.5 m • Guard test lead, green, 2.5 m • Crocodile clip, green • Mains cable • PC SW HVLink PRO with USB and RS 232 cable • Handbook “Guide to modern insulation testing” on CD • Instruction manual on CD • Calibration certificate

Accessories 2.40

2. 27

NEW

High voltage insulation testers MI 3209 TeraOhmLT 10kV

High Voltage Insulation / Continuity / Earth / Transformer

The MI 3209 TeraOhm LT 10kV is a portable insulation resistance tester for insulation testing with DC voltages of up to 10 kV. Boasting excellent IP protection (IP65) and being both mains and battery powered, it is at home in even the most demanding working environments.

MEASURING FUNCTIONS • • • • •

Insulation measurement; Diagnostic test (PI, DAR, DD); Step voltage test; Withstanding voltage test (DC) up to 10 kV; Voltage and frequency measurement up to 550 V TRMS.

• • • • •

completion of measurement. Guard terminal. High voltage breakdown detection. Auto adjustment function. Measurement results in numerical and graphical form. PC software HVLink PRO for downloading and analysing of the test results and test report printing (optional). Isolated RS-232 and USB communication ports. High quality accessories including shielded test leads in standard set. High EM interferences protection: input AC current noise rejection (1 mA∞600 V) and additional averaging of the result (5, 10, 30, 60). CAT IV / 600 V. Mains and rechargeable battery power supply.

KEY FEATURES

•

• Measurement range of insulation resistance up to 10 TΩ. • Adjustable test voltage in steps of 50 V (50 V ... 1 kV) and 100 V (1 kV ... 10 kV). • Programmable timer. • Capacitance measurement. • Charging rate for capacitive load < 3 s / µF at 10 kV. • Automatic discharge of test object after

•

2. 28

Accessories 2.40

•

• •

APPLICATION • Testing of power transformers; • Measuring transducers in distribution networks; • Insulation resistance testing of rotating machinery and cables; • Production line periodic testing and maintenance; • Troubleshooting and analysis of all kinds of insulation problems; • Testing of high voltage generators; • Testing of surge arrestors.

STANDARDS Electromagnetic compatibility • EN 61326 class A Safety • EN 61010-1 (instrument) • EN 61010-2-030 • EN 61010-2-033 • EN 61010-031 (accessories)

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance @ 10 kV

0.01 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ 1.0 TΩ … 9.9 TΩ

10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ 100 GΩ

±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(15% of reading + 1 digits)

Test voltage

0 V … 999 V 1.00 kV… 9.99 kV 10.0 kV … 14.0 kV

1V 10 V 100 V

±(5% of reading + 3 digits)

Insulation leakage current

1.00 mA … 5.00 mA 100 μA … 999 μA 10.0 μA … 99.9 μA 1.00 μA … 9.99 μA 100 nA ... 999 nA 10.0 nA .. 99.9 nA 0.00 nA … 9.99 nA

10 µA 1 µA 100 nA 10 nA 1 nA 100 pA 10 pA

Dielectric absorption ratio (DAR)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 3 digits)

Polarization index (PI)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Dielectric discharge (DD)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Voltage AC/DC

5.0 ... 49.9 V 50 ... 550 V

0.1 V 1V

±(2% of reading + 2 digits)

Frequency

10 Hz … 500 Hz

0.1 Hz

±(0.2% of reading + 1 digits)

Capacitance

20.0 nF … 999 nF 1.00 µF … 9.99 µF 10.0 µF … 50.0 µF

1 nF 10 nF 100 nF

±(5% of reading + 3 digits)

Nominal mains power supply

100-240 VAC, 45-65 Hz, 100 VA (CAT II / 300 V)

Battery power supply

12 VDC (3.4 Ah lead-acid)

Battery operation time

> 3 h continuous testing of 100 MΩ load @ 10 kV > 5 h continuous testing of 100 MΩ load @ 5 kV

Display

320 x 240 dots matrix display with backlight

Degree of protection

IP 65 (case closed)

Overvoltage category

CAT IV / 600 V

COM port

RS-232, USB

Dimensions

345 x 160 x 335 mm

Weight

6.5 kg (with battery and accessories)

±(5% of reading + 3 digits)

±(10% of reading + 0.15 nA)

STANDARD SET

Measuring and Regulation Equipment Manufacturer

Picture of MI 3209 ST set

MI 3209 Standard set (ST) • Instrument MI 3209 TeraOhmLT 10 kV • 10 kV shielded test lead, 2 m, 2 pcs (black, red) • 10 kV crocodile clip, 2 pcs (black, red) • Guard test lead, green, 2 m • Crocodile clip, green • Mains cable • Handbook “Guide to modern insulation testing” on storage media • Instruction manual on storage media • Calibration certificate

Accessories 2.40

2. 29

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 3205 TeraOhmXA 5 kV MI 3205 TeraOhmXA 5kV is a portable battery (Li-ion) or mains powered test instrument with excellent IP protection (IP65 case closed and IP54 case open), intended for diagnosing of Insulation Resistance by using high test voltages of up to 5 kV. It is designed and produced with the extensive knowledge and experience acquired through many years of working in this field.

MEASURING FUNCTIONS

• Insulation resistance up to 15 TΩ. • Adjustable test voltage (50 V...5 kV) 50 V and 100 V step. • Programmable timer. • Capacitance measurement. • Charging rate for capacitive load < 1.5 s / µF at 5 kV. • Automatic discharge of test object after completion of measurement. • Guard terminal. • High voltage breakdown detection.

• Custom defined tests. • Auto adjustment function. • Measurement results in numerical and graphical form. • PC software HVLink PRO for downloading and analysing of the test results and test report printing. • Isolated RS232 and USB communication ports, BT interface. • High quality accessories including shielded test leads in standard set. • High EM interferences protection: Input AC current noise rejection (1 mA@300 V) and additional averaging of the result (5, 10, 30, 60). • CAT IV / 600 V. • Increased working nominal altitude to 3000 m. • High power Li-ion battery pack (14.8V, 4.4Ah). • Mains and rechargeable battery power supply.

2. 30

Accessories 2.40

• • • • •

Insulation measurements; Diagnostic testing (PI, DAR, DD); Step voltage test; Withstanding voltage test (DC) up to 5 kV; Voltage and frequency measurement up to 550 V TRMS.

KEY FEATURES

STANDARDS Electromagnetic compatibility • EN 61326 class A Safety • EN 61010-1 (instrument) • EN 61010-2-030 • EN 61010-2-033 • EN 61010-031 (accessories)

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance

0.01 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ 1.0 TΩ … 9.9 TΩ 10 TΩ … 15 TΩ

10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ 100 GΩ 1 TΩ

±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(5% of reading + 3 digits) ±(15% of reading + 3 digits) ±(15% of reading + 3 digits)

Test voltage

0 V … 999 V 1.00 kV… 4.99 kV

1V 10 V

±(5% of reading + 3 digits)

Insulation leakage current

1.00 mA … 5.00 mA 100 μA … 999 μA 10.0 μA … 99.9 μA 1.00 μA … 9.99 μA 100 nA ... 999 nA 10.0 nA .. 99.9 nA 0.00 nA … 9.99 nA

10 µA 1 µA 100 nA 10 nA 1 nA 100 pA 10 pA

Dielectric absorption ratio (DAR)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 3 digits)

Polarization index (PI)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Dielectric discharge (DD)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5% of reading + 2 digits)

Capacitance

20.0 nF … 999 nF 1.00 µF … 9.99 µF 10.0 µF … 50.0 µF

1 nF 10 nF 100 nF

±(5% of reading + 3 digits)

True RMS voltmeter (DC, 45 Hz … 65 Hz )

5 V ... 550 V

±(2 % of reading +2 digits)

Frequency

10 Hz ... 500 Hz

±(0.2 % of reading +1 digit)

Power supply

90-260 VAC, 45-65 Hz or 14,4 VDC (4,4 Ah Li-Ion)

Protection degree close / open case

IP 65 / IP 54

Display

320 x 240 dots matrix display with backlight

Overvoltage category

CAT IV / 600 V

Protection class

Reinforced insulation 

Degree of protection

IP 65 (case closed)

±(5% of reading + 3 digits)

±(10% of reading + 0.15 nA)

IP 54 (case open) COM port

RS232, USB and Bluetooth

Dimensions

345 x 160 x 335 mm

Weight

6.5 kg

STANDARD SET

Picture of MI 3205 ST set

MI 3205 Standard set (ST) • Instrument MI 3205 TeraOhmXA 5 kV • 10 kV shielded test lead, 2 m, 2 pcs (black, red) • 10 kV crocodile clip, 2 pcs (black, red) • Guard test lead, green, 2 m • Crocodile clip, green • Mains cable • PC SW HVLink PRO with USB and RS 232 cable • Handbook “Guide to modern insulation testing” on CD • Instruction manual on CD • Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3205 EU set

MI 3205 Euro set (EU) • Instrument MI 3205 TeraOhmXA 5 kV • Large HV Crocodile with cable, red, 2.5 m • Large HV Crocodile with shielded cable, black, 2.5 m • Guard test lead, green, 2.5 m • Crocodile clip, green • Mains cable • PC SW HVLink PRO with USB and RS 232 cable • Handbook “Guide to modern insulation testing” on CD • Instruction manual on CD • Calibration certificate

Accessories 2.40

2. 31

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 3201 TeraOhm 5 kV Plus The new insulation tester MI 3201 TeraOhm 5 kV Plus is a portable instrument intended to measure insulation resistance by using high DC test voltages up to 5 kV. TeraOhm 5 kV Plus enables insulation resistance measurements up to 10 TΩ, step voltage test, withstanding voltage test, PI, DD and DAR calculation and capacitance measurement. The large LCD screen enables real-time graph R(t) to be displayed. Results can be stored and downloaded to a computer via USB or RS232 connection with the help of the optional HVLink PRO software. The high quality instrument, shielded test leads and quality accessories included in the standard set enable to perform insulation testing quickly and effectively.

MEASURING FUNCTIONS • Insulation resistance measurement; • Step voltage insulation resistance testing; • Withstanding voltage testing; • Diagnostic test (PI, DD, DAR); • R(t) graph plotting; • Capacitance measurement; • Voltage measurement; • Frequency measurement.

KEY FEATURES • Measuring range up to 10 TΩ. • Wide range of DC test voltages: from 250 V up to 5000 V in steps of 25 V. • Withstanding voltage: testing of insulation with programmable ramp test voltage from 250 V up to 5 kV and programmable threshold current. • Step voltage: insulation resistance measurement with five discrete proportionately set test voltages and programmable timer per step. • Automated testing: PI, DD, DAR calculations with automated resistance ranging. All data is displayed during one single measurement.

2. 32

• Guard test terminal: for elimination of potential surface leakage currents. • Fault finding: fully programmable step voltage and withstanding voltage test functions assist in diagnosing faults in insulation. • Graph R(t): real time resistance against time graph plotting facility to graphically illustrate the response of a material to an applied test voltage. • Built-in timer: programmable timer from 1 s up to 10+0 min. • Automatic discharge of tested object after test. • Fast testing: 5 mA current source for quick charging of capacitive load. • Accurate: selectable noise rejection filters and shielded test leads included in a standard set ensure accurate measurement. • Safe: high CAT IV / 600 V voltage protection. • Built-in charger & rechargeable batteries: instrument has a built-in charger and comes complete with a set of rechargeable NiMH batteries. • Portable: lightweight 3 kg design with carry handle and shoulder strap.

Accessories 2.40

APPLICATION • Testing insulation resistance of rotating machinery, cables, transformers, HV generators, surge arresters; • Production line periodic testing and maintenance; • Troubleshooting and analysis of all kinds of insulation problems; • Diagnostic testing.

STANDARDS Functionality • IEC/EN 61557-2 Electromagnetic compatibility • EN 61326 class B Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance

5 kΩ … 999 kΩ 1.00 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ 1.00 TΩ … 10.00 TΩ

1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ 10 GΩ

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(15 % of reading + 3 digits)

Test voltage

0 V … 5500 V

±(3 % of reading + 3 V)

Insulation leakage current

0.00 nA … 9.99 nA 10.0 nA … 99.9 nA 100 nA … 999 nA 1.00 µA … 9.99 µA 10.0 µA … 99.9 µA 100 µA … 999 µA 1.00 mA … 5.50 mA

0.01 nA 0.1 nA 1 nA 10 nA 100 nA 1 µA 10 µA

±(5 % of reading + 0.05 nA)

Dielectric absorption ratio (DAR)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Polarization index (PI)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Dielectric discharge (DD)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Voltage AC / DC

0 V … 600 V

±(3 % of reading + 4 V)

Frequency

45.0 Hz … 65.0 Hz

0.1 Hz

±0.2 Hz

Capacitance

0.0 nF … 99.9 nF 100 nF … 999 nF 1.00 µF … 50.00 µF

0.1 nF 1 nF 10 nF

±(5 % of reading + 4 nF)

Power supply

6 × 1.2 V NiMH rechargeable batteries, type C

Display

Matrix LCD with backlight, 160 x 116 dots

Overvoltage category

CAT IV / 600 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

310 x 130 x 250 mm

Weight

3 kg

STANDARD SET

• • • •

• • • • • • • •

Instrument TeraOhm 5 kV Plus Small soft carrying bag Mains cable 10 kV shielded test lead with probe, black, 2 m 10 kV shielded test lead with probe, red, 2 m 10 kV crocodile clip, 2 pcs (black, red) Guard lead, green, 2 m Crocodile clip, green

Measuring and Regulation Equipment Manufacturer

Picture of MI 3201 set

MI 3201

6 x 1.2 V NiMH rechargeable batteries, type C Handbook on storage media Instruction manual Calibration certificate

Accessories 2.40

2. 33

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 2077 TeraOhm 5 kV The MI 2077 TeraOhm 5 kV is an advanced, field proven high voltage diagnostic insulation tester. Its small lightweight design make it easily portable and its bright LCD display ensures that readings can be made in almost any lighting conditions. TeraOhm 5 kV enables insulation resistance measurements up to 5 TΩ, step voltage test, withstanding voltage test, PI, DD and DAR calculation and capacitance measurement. Built-in memory and optional PC SW TeraLink enables data storing, downloading to PC, analysis of test results and printout of test reports.

MEASURING FUNCTIONS • Insulation resistance measurement; • Step voltage insulation resistance testing; • Withstanding voltage testing; • Diagnostic test (PI, DD, DAR); • Capacitance measurement; • Voltage measurement; • Frequency measurement.

KEY FEATURES • Measuring range up to 5 TΩ. • Wide range of DC test voltages: from 250 V up to 5000 V in steps of 50 V. • Withstanding voltage: testing of insulation with programmable ramp test voltage from 250 V up to 5 kV and programmable threshold current. • Step voltage: insulation resistance measurement with five discrete proportionately set test voltages and programmable timer per step. • Automated testing: PI, DD, DAR calculations with automated resistance ranging. All data is displayed during one single measurement.

2. 34

• Fault finding: fully programmable step voltage and withstanding voltage test functions assist in diagnosing faults in insulation. • Guard test terminal: for elimination of potential surface leakage currents. • Automatic discharge of tested object after test. • Accurate: selectable noise rejection filters ensure accurate measurement. • Built-in timer: programmable timer from 1 s up to 30 min. • Memory: stores up to 1000 results with date and time stamp. • Easy to read: large custom LCD dot matrix display with bar graph and with backlight. • Built-in charger: instrument has a builtin charger which enables measurement during the charging. • Portable: lightweight 2.1 kg design with carrying bag and neck strap.

Accessories 2.40

STANDARDS Functionality • IEC/EN 61557-2 Electromagnetic compatibility • EN 61326 class B Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance

0 kΩ … 999 kΩ 1.00 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ 1.00 TΩ … 5.00 TΩ

1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ 10 GΩ

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Test voltage

0 V … 5500 V

±(3 % of reading + 3 V)

Insulation leakage current

0.00 nA … 9.99 nA 10.0 nA … 99.9 nA 100 nA … 999 nA 1.00 µA … 9.99 µA 10.0 µA … 99.9 µA 100 µA … 999 µA 1.00 mA … 1.54 mA

0.01 nA 0.1 nA 1 nA 10 nA 100 nA 1 µA 10 µA

±(5 % of reading + 0.05 nA)

Dielectric absorption ratio (DAR)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Polarization index (PI)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Dielectric discharge (DD)

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Voltage AC / DC

0 V … 600 V

±(3 % of reading + 3 V)

Frequency

45.0 Hz … 65.0 Hz

0.1 Hz

±0.2 Hz

Capacitance

0.0 nF … 99.9 nF 100 nF … 999 nF 1.00 µF … 50.00 µF

0.1 nF 1 nF 10 nF

±(5 % of reading + 2 digits)

Battery power supply

6 x 1.2 V NiMH rechargeable batteries, type C

Display

Matrix LCD with backlight, 160 x 116 dots

Overvoltage category

CAT III / 600 V

Protection class

Double insulation

COM port

RS232 (optional USB with serial converter)

Dimensions

265 × 110 × 185 mm

Weight

2.1 kg

STANDARD SET

• • • •

• • • • • • • •

Instrument TeraOhm 5 kV Soft carrying bag Mains cable Test lead, black, 2 m Test lead, red, 2 m Guard lead, green, with crocodile clip, 2 m Test probe, black Test probe, red

Measuring and Regulation Equipment Manufacturer

Picture of MI 2077 set

MI 2077

Crocodile clip, black, 2 pcs Handbook on storage media Instruction manual Calibration certificate

Accessories 2.40

2. 35

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 3202 GigaOhm 5 kV The MI 3202 GigaOhm 5 kV provides quick and accurate testing of insulation resistance. Five test voltages up to 5 kV and 1 TΩ resistance measuring range cover most of the industrial and power distribution applications. The large analogue / digital LCD screen with backlight offers easy reading of test results. The instrument is placed in a rugged carrying case which allows to use it in harsh environments.

MEASURING FUNCTIONS • Insulation resistance measurement; • Voltage measurement; • Frequency measurement.

KEY FEATURES • Measuring range up to 1 TΩ. • Analogue scale and digital LCD: measuring results are displayed both in numeric and analogue form. • Quick set-up: quick and easy selection of test voltage (250 V; 500 V; 1 kV; 2,5 kV; 5 kV).

2. 36

• Fast testing: 5 mA current source for quick charging of capacitive load. • Guard test terminal: for elimination of potential surface leakage currents. • Automatic discharge of tested object after test. • Safe: high CAT IV / 600 V voltage protection. • Easy to read: large bright LCD with backlight. • Built-in charger & rechargeable batteries: instrument has a built-in charger and comes complete with a set of rechargeable NiMH batteries. • High quality accessories: shielded test leads are included in a standard set. • Portable: lightweight 3 kg design with carry handle and shoulder strap.

Accessories 2.40

APPLICATION • Testing insulation resistance of rotating machinery and cables; • Production line periodic testing and maintenance; • Troubleshooting and analysis of all kinds of insulation problems.

STANDARDS Functionality • IEC/EN 61557-2 Electromagnetic compatibility • EN 61326 class B Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Insulation resistance

5 kΩ … 999 kΩ 1.00 MΩ … 9.99 MΩ 10.0 MΩ … 99.9 MΩ 100 MΩ … 999 MΩ 1.00 GΩ … 9.99 GΩ 10.0 GΩ … 99.9 GΩ 100 GΩ … 999 GΩ

1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ 100 MΩ 1 GΩ

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(10 % of reading + 3 digits)

Test voltage

0 V … 5500 V

±(3 % of reading + 3 V)

Voltage AC / DC

0 V … 600 V

±(3 % of reading + 4 V)

Frequency

45.0 Hz … 65.0 Hz

0.1 Hz

±0.2 Hz

Battery power supply

6 × 1.2 V NiMH rechargeable batteries, type C

Display

Analogue / digital LCD with backlight

Overvoltage category

CAT IV / 600 V

Protection class

Double insulation

Dimensions

310 x 130 x 250 mm

Weight

3 kg

MI 3202

• • • • • • • •

Instrument GigaOhm 5 kV Mains cable 10 kV shielded test lead with probe, black, 2 m 10 kV shielded test lead with probe, red, 2 m 10 kV crocodile clip, 2 pcs (black, red) Guard lead, green, 2 m Crocodile clip, green 6 x 1.2 V NiMH rechargeable batteries, type C

• Handbook on storage media • Instruction manual • Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of MI 3202 set

STANDARD SET

Accessories 2.40

2. 37

High Voltage Insulation / Continuity / Earth / Transformer

High voltage insulation testers MI 3121H SMARTEC 2,5 kV Insulation / Continuity The MI 3121H Smartec 2,5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements. Due to insulation resistance measurement with the test voltages up to 2.5 kV (measuring range is up to 100 GΩ) and calculation of PI and DAR indexes the instrument is suited for testing insulation of cable lines, current and voltage transformers, electric motors, etc. Due to configurable limits the instrument enables PASS / FAIL evaluation of test results which is accompanied with bright green or red light of LEDs. Additional features include magnetic holder for fixing the tester on the metal surface and built-in charger. The MI 3121H is compatible with EuroLink PRO software which enables downloading and analysis of test results and creation of professional test reports.

MEASURING FUNCTIONS • Insulation resistance with DC voltage up to 2.5 kV; • Diagnostic test (PI, DAR calculation); • Continuity of PE conductors with 200 mA test current and polarity change; • Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping; • TRMS voltage and frequency.

KEY FEATURES • High measuring range: up to 100 GΩ with test voltage from 100 to 2500 V. • Insulation diagnostics: PI and DAR calculation for determining if the insulation damaged or contaminated. • Guard test terminal: for elimination of potential surface leakage currents. • Polarity swap: automatic polarity reversal on continuity test.

2. 38

• Analogue scale: measuring results are displayed in numeric and analogue representation. • Custom limits: if limits are set on insulation or continuity function then large green and red lights of the LEDs will indicate a PASS or FAIL evaluation of test result. • Safe: suited for testing on CAT IV installations. • Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. Memory: two level memory structure for saving of test results and parameters. • Downloadable: downloads via RS232 or USB cable directly to the PC with the help of the PC software EuroLink PRO. • Easy to use: large bright LCD display and large buttons enable easy handling of the instrument (even while wearing gloves). • Magnetic holder: magnet for fixing instrument on metal surfaces enables hands-free operation.

Accessories 2.40

APPLICATION • Measurement of insulation resistance of transformers, motors, cables, machines, etc.; • Testing on CAT IV installations (distribution side of installations, industrial plants, etc.); • Observation of insulation trends; • Testing of PE conductors continuity and main and supplementary PE connections.

STANDARDS Functionality • IEC/EN 61557 Parts 1, 2, 4, 10 • IEC/EN 60364 • VDE 100 • BS 7671 17th edition • CEI 64.8 Electromagnetic compatibility • IEC/EN 61326-1; Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Insulation resistance (EN 61557-2)

U = 500, 1000, 2500 VDC: R: 0.00 MΩ … 19.99 MΩ 20.0 MΩ … 199.9 MΩ 200 MΩ … 999 MΩ 1.00 GΩ … 4.99 GΩ 5.00 GΩ … 19.99 GΩ 20.0 GΩ … 99.9 GΩ U = 100, 250 VDC: R: 0.00 MΩ … 19.99 MΩ 20.0 MΩ … 199.9 MΩ 200 MΩ … 999 MΩ

Resolution

Accuracy

0.01MΩ 0.1MΩ 1 MΩ 10 MΩ 10 MΩ 100 MΩ

±(5 % of reading + 3 digits) ±5 % of reading ±5 % of reading ±10 % of reading ±20 % of reading ±20 % of reading

0.01 MΩ 0.1 MΩ 1 MΩ

±(5 % of reading + 3 digits) ±10 % of reading ±20 % of reading

PI, DAR

0.01 … 9.99 10.0 … 100.0

0.01 0.1

±(5 % of reading + 2 digits) ±5 % of reading

Continuity 200 mA of PE conductor with polarity change (EN 61557-4)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(3 % of reading + 3 digits) ±5 % of reading ±10 % of reading

Low resistance measurement with 7 mA test current (continuous measurement)

0.0 Ω … 19.9 Ω 20 Ω … 1999 Ω

0.1 Ω 1Ω

±(5 % of reading + 3 digits) ±10 % of reading

Voltage

0.0 V … 99.9 V 100 V … 550 V

0.1 V 1V

±(3 % of reading + 3 digits)

Frequency

0.00 Hz … 19.99 Hz 20.0 Hz … 199.9 Hz 200 Hz … 500 Hz

0.01 Hz 0.1 Hz 1 Hz

±(0.2 % of reading + 1 digits)

Power supply

6 x 1.2 V rechargeable batteries, type AA

Overvoltage category

CAT III / 600 V; CAT IV / 300 V

Protection class

Double insulation

COM port

RS232 and USB

Dimensions

140 x 230 x 80 mm

Weight

0.85 kg

STANDARD SET

• • • •

• Instrument Smartec 2,5 kV Insulation / Continuity • Soft hand strap • Test lead, 2 x 1.5 m • Test probe, 2 pcs (black, red) • Crocodile clip, 2 pcs (black, red) • Power supply adapter + 6 NiMH rechargeable batteries, type AA

Measuring and Regulation Equipment Manufacturer

Picture of MI 3121H set

MI 3121H

Instruction manual on storage media Short instruction manual Handbook on storage media Calibration certificate

Accessories 2.40

2. 39

•

Crocodile clip, red

A 1309

Crocodile clip, green

S 2036

HV crocodile clip, 2 pcs (red, black)

10 kV crocodile clips for HV insulation resistance measurement assure secure and permanent contact during the measurement on bus bars, fixing screws, etc.

A 1046

1.2 V NiMH battery, type C, 6 pcs

A set of 6 pieces of rechargeable batteries, type C.

A 1568

8800mAh battery pack

Li-Ion Battery pack 7,2V 8800mAh.

A 1169

Fast charger for AA, C, D and 9 V block batteries

Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.

A 1017

Communication cable RS232

RS232 interface cable for connecting the instrument with the PC.

A 1171

RS232 / USB adapter with 1 m cable

RS232 / USB adapter for instruments without USB communication port.

•

A 1056

PC SW TeraLink with RS232 cable

PC Software TeraLink supplied with RS232 interface cable supports test results downloading and creation of test reports.

•

A 1275

PC SW HVLink PRO

HVLink PRO is a downloading and data management PC software with R=f(t) graph printing functionality (for HV insulation testers). It comes delivered with RS232 and USB communication cables.

Option

2. 40

Accessories 2.40

MI 3202

A 1064

Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.

MI 2077

Crocodile clip, black

MI 3201

A 1013

MI 3205

Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.

MI 3209

Test probe, black

MI 3210

A 1014

•

MI 3242

Additional MI 3295M Set for simultaneous measurements of step and contact voltage. With optional current clamps A 1018 or A 1587 also leakage current measurements are possible. Set includes instrument MI 3295M, test lead 2 x 3 m, soft carrying bag, soft carrying neck belt, NiMH battery type AA, 6 pcs, Power supply adapter.

MI 3250

Step Contact Meter Measuring Set

MI 3252

MI 3295M Set

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

MI 3121H

Selection Guide for HV Accessories

•

S 2053

Step voltage plates

Light replacement for 25kg Step voltage probes A 1353.

•

S 2058

Insulation test plates

Two in one: Test plates for measurement of floor and wall insulation, ∆625 cm2 (acc. to EN 60364-6) and measurement of semi conductivity, 2,5 kg, Ø65 mm (acc. to EN 61340-5-1).

A 1012

Test lead, green, 4 m

Extension test lead.

A 1154

Test lead, black, 4 m

Extension test lead for earth and continuity measurements.

•

A 1319

2.5 kV test lead, 3 x 1.5 m

3-wire test lead with GUARD connection for insulation resistance measurements with test voltage up to 2,5 kV. Recommended to be used when measuring high insulation resistances (>10 GΩ).

•

A 1153

Test lead, black, 20 m

Extension test lead for earth and continuity measurements.

•

A 1383

Temperature probe with 3 m cable

Temperature probe with measuring range from -55 °C to +125 °C for measurement of ambient temperature.

•

A 1437

Test lead with Kelvin probe

Test lead with Kelvin probe for fast resistance measurements.

•

MI 3202

•

MI 3121H

Additional voltage probes for step voltage measurements.

MI 2077

Step voltage probe (25 kg), 2 pcs

MI 3201

A 1353

MI 3205

Reference resistor 750 µΩ, class 0.1, with certificate.

MI 3209

Reference resistor 750 µΩ

MI 3210

A 1333 V2

MI 3242

PC Software EuroLink PRO enables downloading and test results management and printing of test reports. Delivered with RS232-PS/2 and USB communication cables.

MI 3250

PC SW EuroLink PRO with USB and RS232PS/2 cable

MI 3252

A 1291

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 41

A 1649 10M Kelvin Extension test lead

Kelvin Extension test lead with banana plugs, 10 mm2, 10 m.

S 2046

100 A current test lead with insulated crocodile clip for performing accurate resistance measurements with MI 3252.

Current test lead with insulated crocodile clip, 5 m, 25 mm2, 2 pcs

S 2126 10M Set of test leads with big Kelvin clamps S 2126 5M

A 1815 10M Test lead H0-H1 A 1815 5M

•

Set of 8 test leads long, 8 pcs. of Kelvin clips with jaw opening 35 mm and two fastening ropes with carabiner hook for measurements on power transformers packed in a soft carrying bag.

•

Double two wire test leads (H0-H1) with banana termination to be used together with different Kelvin clips.

•

A 1815 2M5

•

A 1816 10M Test lead H2-H3 A 1816 5M

Double two wire test leads (H2-H3) with banana termination to be used together with different Kelvin clips.

• •

A 1816 2M5

•

A 1817 10M Test lead X0-X1 A 1817 5M

Double two wire test leads (X0-X1) with banana termination to be used together with different Kelvin clips.

• •

A 1817 2M5

•

A 1818 10M Test lead X2-X3 A 1818 5M

Double two wire test leads (X2-X3) with banana termination to be used together with different Kelvin clips.

• •

A 1818 2M5

•

A 1814

Fastening rope 1 m with carabiner hook

A rope with carabiner hook for easy fixing of long measurement cables.

S 2122

Earth test set, 4-wire, 20 m

Earth test set for MI 3288, 20 m (test lead, 4 x 1 m; 2 x test lead, 20 m; 2 x test lead, 4,5 m; 4 x earth test rod)˝.

Option

2. 42

Accessories 2.40

•

MI 3202

MI 3121H

MI 2077

MI 3201

MI 3205

Kelvin test probes with crocodile clips and protection shield as lightweight alternative to clips within the standard set.

MI 3209

Continuity test lead, with crocodile clip, 2 x 2.5 m, 2 pcs

•

MI 3210

S 1072

MI 3242

Test cable with Kelvin clamps for easy resistance measurements with MI 3242.

MI 3250

Test cable Kelvin, 2,5 m

MI 3252

A 1408

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

•

Current test lead with crocodile clip, 10 m, 50 mm2, 2 pcs

Extended 100 A current test leads for accurate measurements with MI 3252.

A 1740

Calibration box 5kV

Calibration Box for checking insulation measurements in the field (max. test voltage = 5kV).

A 1597

Human body resistance probe

The A 1597 is an external adapter used for human body resistance simulation.

A 1593

Large Kelvin test crocodile

Large robust Kelvin crocodile clip for accurate resistance measurements on larger objects with jaw opening 35 mm.

•

A 1595

Large test crocodile, black

Large robust crocodile clip for resistance measurements on larger objects.

•

A 1596

Large test crocodile, red

•

A 1757

Large kelvin test clip 65 mm

Large Kelvin test clip with jaw opening of 65 mm for best contacting on bigger terminals.

•

A 1539 BLK 2M5

10 kV shielded test lead with large black HV test clip, 2.5 m

A 1639 RED 2M5

•

HV test clip with shielded cable for best contacting of different contact surfaces with 35 mm jaw opening.

•

10 kV test lead with large red HV test clip, 2.5 m

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

•

A 1939 RED 2M5

10 kV shielded test lead with large red HV test clip, 2.5 m

HV test clip with shielded cable for best contacting of different contact surfaces with 35 mm jaw opening.

•

A 1655

Test lead 1000 V CAT III, green, 2,5 m

Guard test lead for insulation resistance measurements.

•

MI 3242

•

MI 3250

•

MI 3252

•

MI 3280

•

MI 3295

•

MI 3288

MI 3202

S 2052

MI 3121H

Earth test set for MI 3288, 50 m (test lead, 4 x 1 m; 2 x test lead, 50 m; 2 x test lead, 4,5 m; 4 x earth test rod).

MI 2077

Earth test set, 4-wire, 50 m

MI 3201

S 2123

MI 3205

Target application

MI 3209

Description

MI 3210

Part number

MI 3290

Photo

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 43

S 1939 15M

Set 10 kV shielded test leads with large HV test clip, 15 m

S 2029

10 kV shielded test lead, 8 m, 2 pcs

S 2084

10 kV shielded test lead + guard, 8 m, 2 pcs

S 2030

10 kV shielded test lead, 15 m, 2 pcs

S 2039

5 kV shielded test lead, 15 m, 2 pcs

5 kV shielded test leads for MI 2077 improve accuracy of HV insulation resistance measurement in environments with high content of external electromagnetic interferences.

•

S 2042

5 kV shielded test lead with test probe, 10 m, 2 pcs

Set of 5 kV shielded test leads with test probe and Guard test lead with crocodile clip for MI 2077 improves accuracy of HV insulation resistance measurement in environments with high content of external electromagnetic interferences.

•

S 2044

5 kV shielded test lead with test probe, 15 m, 2 pcs

5 kV shielded test leads with test probe improve accuracy of HV insulation resistance measurement in environments with high content of external electromagnetic interferences.

•

A 1018 3M5

Current clamp (low range, leakage), 3.5 m length

High accuracy current clamp 1000 A / 1 A with jaw opening 52 mm and fixed 3.5 m cable for both load and low range / leakage current measurement and for earth resistance measurement as well.

•

A 1019

Current clamp

Current clamp 1000 A / 1 A with jaw opening 52 mm for general current measurements and in combination with A 1018 for earth resistance measurement without breaking the loop.

•

A 1281

A 1227

A 1587

•

10 kV shielded test leads improve accuracy of HV insulation resistance measurement in environments with high content of external electromagnetic interferences.

•

Current clamp 0,5/5/100/1000 A /1V

•

1-phase flexible current clamp 3000/300/30 A /1V

•

Flexible current clamp 3000/300/30 A

Single phase flexible current clamp with three selectable measuring ranges. With banana plug. Powered with alkaline or rechargeable batteries.

Option

2. 44

•

Accessories 2.40

•

MI 3202

Set 10 kV shielded test leads with large HV test clip, 10 m

•

MI 3121H

S 1939 10M

Set of HV test clips with shielded cable for best contacting of different contact surfaces with 35 mm jaw opening.

MI 2077

Set 10 kV shielded test leads with large HV test clip, 5 m

MI 3201

S 1939 5M

MI 3205

Set 10 kV test leads with large HV test clip, 15 m

MI 3209

S 1539 15M

MI 3210

Set 10 kV test leads with large HV test clip, 10 m

MI 3242

S 1539 10M

Set of HV test clips with shielded cable for best contacting of different contact surfaces with 35 mm jaw opening.

MI 3250

Set 10 kV test leads with large HV test clip, 5 m

MI 3252

S 1539 5M

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

•

Extension current test lead for MI 3295, 10 mm2, length 100 m.

A 1509

Test lead 50m black on cable reel

Test lead on a cable reel, black, 50 m, extendable.

•

A 1510

Test lead 50m green on cable reel

Test lead on a cable reel, green, 50 m, extendable.

•

A 1525

Test lead 50m blue on cable reel

Test lead on a cable reel, blue, 50 m, extendable.

•

A 1526

Test lead 5m blue

Test lead, blue, 5 m, banana plug on both sides.

•

A 1527

Test lead 5m red

Test lead, red, 5 m, banana plug on both sides.

•

A 1528

Professional current earth spike 42 cm

Professional earth spike, 42 cm, with banana socket (drill).

•

A 1529

Professional current earth spike 90 cm

Professional earth spike, 90 cm, with banana socket (smooth).

•

A 1629

Current and potential earth spike, 60 cm (with 3 m lead)

For effective earth potential measurements, 60 cm.

A 1530

G clamp

Professional G clamp for perfect contacting, with banana socket.

MI 3202

Extension test lead on reel, 100 m

MI 3121H

A 1540

MI 2077

•

MI 3201

Extension for current test lead, shielded, on reel, 75 m, 2 banana plugs both sides.

MI 3205

Extension test lead, shielded, on reel, 75 m

MI 3209

A 1508 EXT

MI 3210

•

MI 3242

Flexible current clamp with circumference of 5 m and connection cable of 15 m, max. 50 A.

MI 3250

Flexible current clamp 50 A, 5m

MI 3252

A 1487

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 2.40

2. 45

•

P 1101

Metrel MESM BASIC to PRO licence key Upgrade

Licence key for upgrading the Metrel ES Manager to advanced version with professional report creation and Excel PRO export functionality.

•

P 1102-AND Metrel aMESM PRO Licence Key Upgrade

•

P 1201

MI 3290 GL licence key

for Grounding and Lightning functionality of Earth Analyser.

•

P 1202

MI 3290 GP licence key

for Grounding of Pylons functionality of Earth Analyser.

•

P 1203

MI 3290 GF licence key

for Grounding and voltage Funnel functionality of Earth Analyser.

•

P 1204

MI 3290 GX2 upgrade licence key

A licence key for upgrade from base functionality (GP/GL/ GF) to full functionality (GX) of Earth Analyser MI 3290.

•

A 1737

Carrying case

•

S 2138

S 2138 Set of wheels for carrying cases A 1736, A 1737, A 1738

Wheels and trolley that can be added to carrying cases for easier transport.

•

A 1081

Bag for accessories

Bag for accessories, with Metrel logo.

A 1271

Carrying bag (S)

Small soft carrying bag for transport and storage of test instrument or accessories.

A 1006

Soft carrying bag

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

Option

2. 46

Accessories 2.40

•

MI 3202

•

MI 3121H

•

MI 2077

SDK Licence key for instrument integration with 3rd party SW.

MI 3201

Metrel SDK Licence Key

MI 3205

P 1104

MI 3209

•

MI 3210

•

MI 3242

Licence key for an additional FW profile and BASIC MESM functionality.

MI 3250

Metrel FW Profile Licence Key With BASIC SW Set

MI 3252

P 1100

MI 3280

Target application

MI 3295

Description

MI 3288

Part number

MI 3290

Photo

•

Content Appliance / Machine / Switchboard Safety 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

GOOD TO KNOW Testing the Safety of Appliances

3.02

PAT TESTERS Selection Guide for GT Testers Selection Guide for Printers, Applications and Scanners MI 3360 OmegaGT XA MI 3309 BT DeltaGT MI 3311 GammaGT

3.04 3.05 3.06 3.12 3.14

OTHER INSTRUMENTS / ADAPTERS / ACCESSORIES A 1322 and A 1422 Active 3-phase Adapter

3.16

GOOD TO KNOW Testing the Safety of Machines and Switchboards

3.18

MACHINE AND SWITCHBOARD TESTERS Selection Guide for Machine and Switchboard Testers Rack mount adapter MI 3394 CE MultiTesterXA MI 3394 CE MultiTesterXA SETS MI 3325 MultiServicerXD

3.20 3.21 3.22 3.24 3.26

GOOD TO KNOW NEW End-of-line safety testing in production NEW

3.30

END-OF-LINE SAFETY TESTING IN PRODUCTION NEW MI 3394 CE MultiTesterXS NEW

3.32

SELECTION GUIDE FOR HV ACCESSORIES

3.34

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

Appliance / Machine / Switchboard Safety

Electrical Installation Safety High Voltage Insulation / Continuity / Earth / Transformer APPLIANCE / MACHINE / SWITCHBOARD SAFETY Power Quality Analysis Equipment for laboratories and Schools Multimeters / Clamp meters / Voltage testers / Thermal cameras Software

3. 1

Good to know Testing the Safety of Appliances Find out more about testing safety of electrical equipment. Primary goal of testing safety of electrical equipment is to use all electrical equipment without danger. Common accidents caused by electrical equipment are: • Injuries through electric shock caused by malfunctioned equipment; • Injuries through overheated equipment; • Fire and explosions. To prevent risk and possible danger caused by using electrical appliances and other equipment appropriate safety testing procedure should be performed. Testing of electrical equipment is not regulated the same way in all countries. For instance in Germany, UK, Australia testing of all electrical equipment is strictly regulated by law. Through their positive experience it can be assumed that other countries will follow in the future. Safety of electrical equipment depends on different factors which can improve or worsen the safety level. 100 % Remaining risk Age

Periodic retests Correct service and maintenance

Wear

Correct use Independent certification Type test

Harsh conditions

Adequate design Consideration of safety standards

Damage

Types of safety tests of electrical equipment are: • Type testing; • End of line testing; • Maintenance testing; • Periodic testing. According to the standards electrical equipment is divided in: • Electrical appliances; • Electrical equipment in medical use; • Electrical machines; • Electrical switchgears.

In the table below the differences between classes are described. Class

Marking



Connection to yes no protection (PE) conductor of the all accessible installation. metal parts (case etc.) are connected to the PE connection. Basic insulation performed performed Supplementary or reinforced insulation

Supply cord Notes

not needed in performed general, needed if there are accessible unearthed metal parts 1) three pole (L,N, can be two PE) pole installation must have adequate earthing resistance

III

High DC voltage test signal is applied between connected live pins and PE contact of supply cord. Unearthed accessible metal parts are NOT included in this test and are measured as Class II items.

no connection to mains

performed / looser limits not needed

two pole must be supplied from a SELV (safety low voltage) source, typically 12 V or 24 V

Portable appliances - measurements: Visual check Visual test of the equipment is intended to confirm that there are no visible signs of damage or defects. Result of visual test can be stored on most of Metrel GT testers for future reference. Earth bond (continuity of protective conductor) test With the earth bond test following is determined: • That the contacts between accessible metal parts and PE conductor are firm. • That PE wire in the appliance supply cord is undamaged. • That there are no signs of poor contacts, corrosion etc.

Insulation resistance test for Class II device

High DC voltage test signal is applied between connected live pins and accessible isolated metal part. Substitute leakage test In this test the live and neutral conductors of the appliance are shorted together and voltage of 30 - 50 V AC is applied between this point and either the earth conductor (class I) or the probe connected to any exposed conductive part (class I and class II). The test measures how much current passes from the live conductors into the test point.

Substitute leakage test for Class I device

AC test signal is applied between connected live pins and PE contact of supply cord. Isolated accessible metal parts are NOT included in this test and are measured as Class II items.

Earth bond test

Test signal is applied between PE pin of supply cord and accessible earthed metal parts. Substitute leakage test for Class II device

Classification of appliances by field of use: • Laboratory equipment; • Measuring and regulating equipment; • Power supplies; • Heating appliances; • Handheld tools; • Luminaries; • Consumer electronic; • Information and communication technology (computers, fax machines, scanners, etc.); • Prolongation cords, IEC supply cords; • Appliances for medical use. Classification of appliances by protection classes: According to the design electrical equipment can be divided in three classes.

Insulation resistance Insulation resistance between live conductors and all accessible metal parts (earthed and isolated) is checked. This test discloses faults caused by pollution, moisture, deterioration of insulation material etc.

3. 2

Accessories 3.34

Insulation resistance test for Class I device

AC test signal is applied between connected live pins and accessible isolated metal part. Leakage current tests In this test the sum of leakage currents caused by appliance insulation resistances (resistive currents through the insulation material, fault currents through decreased insulation) and capacitances (capacitive leakage current) is checked. Excessive leakage currents are most often caused by deterioration of the appliance insulation (pollution, ageing, moisture) or faults in mains circuits of appliances.

In general three leakage currents are measured: the differential leakage current, the PE conductor (direct) leakage current and the touch leakage current. PE conductor lekage test

Polarity test Polarity test checks the correctness of polarity of IEC leads, prolongation cords etc. is checked. With this test shorts, crossed and opened wires in cords can be found. PRCD testing

Polarity test PE conductor leakage current test for Class I device

Appliance must be powered on. The current flowing through appliance PE conductor is measured. Appliance must be placed isolated against ground. Unearthed accessible metal parts are not included in this test. They are considered as class II parts and are checked in the Touch Leakage test. Differential leakage current test Differential leakage measures the difference in current between the live and neutral cable which provides a true value of how much current the appliance leaks to ground.

Measurement of load and leakage currents with current clamps Advantages of clamp measurements are: • Measured electrical equipment does not need to be disconnected from the mains. • Selective current tests can be performed by embracing individual conductors. • Individual currents can be measured without disconnections. Current clamps are best suited for: • functional testing of fixed installed appliances; • functional testing of appliances with nominal currents >16 A; • troubleshooting of current paths in appliances.

Differential leakage current test for Class I device

Appliance must be powered on. The leakage current is measured as the difference of currents through L and N conductors. Unearthed accessible metal parts are not included in this test. They are considered as class II parts and are checked in the Touch Leakage test. Touch leakage test Leakage leakage current is a current that would flow via the isolated accessible metal part (if touched) through body to ground are measured in this test.

Current measurement with current clamps

Appliance must be powered on. By embracing separate conductors load or leakage currents can be measured. Functional test Functional check explores if the appliance is working properly. The use of more sophisticated measuring instruments permits load testing, which is an effective way of determination if there are faults in the appliance.

Appliance must be powered on. The current through the isolated accessible metal parts is measured (each part separately).

Active polarity test This test provides testing of PRCD protected cords while voltage is applied to tested object.

Active polarity test

Autosequences All Metrel GT testers contain built-in predefined test sequences which are specified sets of measurements, limits and test parameters. To select the correct test sequence first the type and class of appliance must be determined. Then all safety relevant accessible conductive parts must be found. After that the test sequence, test limits and parameters must be selected. It is of a great advantage if this can be made automatically by the measuring instrument. Custom test sequences In case of testing unusual appliances or appliances that require a special method of testing that is not included in the standard autosequences custom defined test sequences can be used. Project uploading When retesting a site or location, project uploading allows previously saved information to be reloaded onto the GT tester to speed up testing and enable trend comparison.

Functional test Touch leakage current test for Class II device

PRCD testing

PRCD test This test checks how long it takes for a portable RCD to trip out in the case that a fault occurs.

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

Trend comparison Trend comparison allows test information from different dates to be compared in order to discover if deterioration is occurring in an appliance. In case the deterioration was found, the test engineer can make an informed decision as to if the frequency of testing and inspection is sufficient for the appliance. 3. 3

GT testers Selection Guide for GT Testers FEATURES

Description

MI 3360 OmegaGT XA

MI 3309 BT DeltaGT

MI 3311 GammaGT

APPLICATIONS

PAT / Medical / Welding / 3PH / Service & reapair

• / •1 / • / • / • 2

•/-/-/-/-

MEASUREMENTS

Continuity 200 mA

•

Continuity 10 A

•3

Continuity 25 A

•3

Insulation resistance 250 VDC

•

Insulation resistance 500 VDC

•

Differential leakage current

•

PE Leakage

•

Touch leakage current

•

Substitute leakage current

•

Leakage current measurements with optional clamp

•

Flash test

•4

RCD testing

AC / A / B

AC / A5

PRCD testing / Extended PRCD testing

•/•

•/-

Polarity test (IEC lead test) / Active polarity

•/•

•/-

Functional (load) test

•

ADDITIONAL FEATURES

Voltage TRMS

•

Enhanced TRMS test

•

GENERAL DATA

•

Mains supply check

•

Graphical LCD / Touch screan

•/•

•/-

Graphical on-line help

•

Real time clock

•

QWERTY keyboard

Option

Auto testing (organizer, custom autotests)

•

QR-code shortcut auto testing / Barcode

•/•

Communication ports USB / RS232 / BLUETOOTH

•/•/•

• / • / Option

“Test and tag” (barcode scanner + label printer)

•

Data download to PC

•

Project upload from PC

•

PC SW PATLink PRO / MESM

-/•

•/•

•/-

Number of memory locations

SD 8GB (up to 32GB)

1500

QR-code custom testing

Option

Barcode scanner

Option

Barcode label printer

Option

QR label printer

Option

Basic PC SW

•

Option

Advanced PC SW

Option

Android app

Option

3PH active adapter

Option

NFC / RFID

Option / Option

Option

Weight

6.1 kg

0.86 kg

Dimensions (mm)

310 x 130 x 250

140 x 80 x 230

MI 3360 M only MI 3360 F only MI 3360 25A, M, F only 4 MI 3360 F only 5 RCD t only 1 2 3

3. 4

•/-

PASS / FAIL evaluation Built-in Checkbox (available in UK model only)

STANDARD / OPTIONAL ACCESSORIES

•

Accessories 3.34

•

GT testers Selection Guide for Printers, Apps and Scanners INSTRUMENT

MI 3360 OmegaGT XA

MI 3325 MultiServicerXD

MI 3309 BT DeltaGT Built in BLUETOOTH

CABLE ONLY PRINTER

CABLE OR BLUETOOTH BLUETOOTH VIA ANDROID

ANDRIOD APP BLUETOOTH CABLE SCANNER BLUETOOTH

•

S 2062 Zebra BT lable printer set

•

Printek mobile printer

•

AUS/NZ

EU incl. UK

A 1489 Able printer

MTP 400

•

RW 220

Zebra mobile printer

•

P4T

Zebra mobile printer

•

Barcode QR

•

NFC

Barcode QR

NFC

•

Barcode

•

Barcode

•

A 1488 Able printer

Bluetooth via external DONGLE

REGION

HW 3

BLUETOOTH COMMUNICATION Available at local authorised reseller

INSTRUMENT HW VERSION

MI 3311 GammaGT

•*

•

•*

•

•*

A 1434 aPAT Android

•

A 1433 PATLink Android

•

A 1521 aMESM

•

A 1105 Barcode scanner

•

A 1571 NFC reader / writer

•

A 1652 Barcode scanner

•

A 1653 QR/Barcode scanner

•

•*

•

* Suported via Android app aPAT only ** Printing via APP supported only from S 2062

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 5

Appliance / Machine / Switchboard Safety

GT testers MI 3360 OmegaGT XA New series of OmegaGT XA brings 4 models of the instrument, intended for professional use in the most demanding applications. All of them support user accounts, which means that one device can be used by several electricians. Model versions cover the following fields of testing: portable appliances, welding equipment, medical devices and professional testing of PRCD devices. All instruments have an advanced built-in user interface that enables the execution of pre-defined and user-created AUTOSEQUENCE®s. Large memory capacity (8 GB microSD card) enables the user long term saving and archiving of data. All the instruments are specially designed for long-term testing, since their memory structure enables simple searching through the archive of devices and quick re-execution of (periodic) tests. Great emphasis was put on support for peripheral devices such as printers and barcode or QR code scanners and RFID readers (in Bluetooth and wired versions). On top of that, all instrument versions are supported by our Metrel ES Manager PC software.

MEASURING FUNCTIONS

KEY FEATURES

• Visual inspections; • Fuse test; • Continuity // Protective earth resistance 200mA; • Continuity // Protective earth resistance 10A, 25A (25A, M, F, models only); • Insulation Resistance (Riso, Riso-S); • Sub-Leakage Current, Substitute Leakage Current - S; • Differential Leakage current; • PE leakage current; • Touch leakage current; • Insulation resistance, IEC/EN 62353; • Touch leakage current, IEC/EN 62353; • Equipment leakage (direct, differential, alternative) IEC/EN 62353; • Applied part leakage (direct, alternative), IEC/EN 62353; • Insulation resistance, (optional A 1422) IEC/EN 60974-4; • Welding circuit leakage, (optional A 1422) IEC/EN 60974-4; • Primary leakage, (optional A 1422) IEC/EN 60974-4; • No-load voltage, (optional A 1422) IEC/EN 60974-4; • Power (P, S, Q, PF, THDu, THDi, CosØ, I, U,); • PRCD test, (2 pole, 3 pole, K/ Di (varistor), S (3-pole)); • PRCD PE probe test, PRCD open conductor test, PE conductor (PRCD) test; • RCD test, (type A, AC, B, B+, F); • Flash test, (1500V, 3000V); • Polarity / Active polarity test; • Clamp current (with optional A 1579).

• High resolution colour touch screen, 4.3” TFT. • Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like. • Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device. • Read the code and test: QR and barcode system of labelling in combination with AUTOSEQUENCE®s enables the user quick and simple testing of electrical devices. • Testing groups: the instruments have built-in filters in accordance with their area of application, which enables the user simple choice of needed test sequences. • Support for PRCD testing: support for all types of PRCDs, including 2-pole, 3-pole, K/Di (varistor), S (3 pole) and testing with the PE probe. • Support for RCD testing: all instruments support testing of A, AC, B, B+ and F RCDs. • Fuse testing: the instrument has a special, integrated testing module for quick testing of all types of fuses. • Hard-wired devices: the instruments have integrated additional test terminals that enable the user simple testing of hardwired devices. • High-voltage testing (only MI 3360 F): the instrument enables insulation resistance measurement that has to be performed after repairs or maintenance of electrical devices.

3. 6

Accessories 3.34

• Testing of medical devices (only MI 3360 M): the instrument enables testing of medical devices in accordance with IEC/EN 62353. • Testing of welding equipment (only in combination with A 1422): all models of OmegaGT XA support testing of welding equipment in accordance with IEC/EN 60974-4. • Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although that can be expanded to 32 GB. • PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving. • aMESM Android SW: enables QR code scanning, and uploading of pre-prepared user-defined AUTOSEQUENCE®s.

APPLICATION • Testing of portable electrical equipment; • Testing of fixed installed electrical equipment; • Testing of medical electrical equipment; • Testing of 3-phase electrical equipment; • Testing of electrical welding equipment; • Testing of portable switchboards with integrated PRCD switches; • Testing of extension leads with integrated PRCD switches.

TECHNICAL DATA Continuity / Protective earth resistance Continuity 200mA, (10A, 25A, only at models: MI 3360 25A, MI 3360 M, MI 3360 F) FUNCTION

Measuring range

Resolution

Accuracy

0.00 Ω … 19.99 Ω

0.01 Ω

±(2 % of reading + 2 D)

20.0 Ω … 99.9 Ω

0.1 Ω

± 3 % of reading

100.0 Ω … 199.9 Ω

0.1 Ω

± 5 % of reading

200 Ω … 999 Ω

1Ω

indicative

Insulation Resistance (Riso, Riso-S) Insulation resistance, Insulation resistance –S (250 V, 500 V) FUNCTION

Measuring range

Resolution

Accuracy

Riso Riso-S

0.00 MΩ … 19.99 MΩ

0.01 MΩ

±(3 % of reading + 2 D)

20.0 MΩ … 99.9 MΩ

0.1 MΩ

± 5 % of reading

100.0 MΩ … 199.9 MΩ

0.1 MΩ

± 10 % of reading

Substitute leakage current, (Isub, Isub-S) Open circuit voltage (230Va.c.,110Va.c.), FUNCTION

Measuring range

Resolution

Accuracy

Isub Isub-S

0.00 mA … 1.99 mA

0.01 mA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

Idiff

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

Ipe

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

Itou

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

0 W … 999 W

±(5 % of reading + 5 D)

1.00 kW … 3.70 kW

10 W

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

0 W … 999 W

±(5 % of reading + 5 D)

1.00 kW … 3.70 kW

10 W

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

0 VA … 999 VA

1 VA

±(5 % of reading + 5 D)

1.00 kVA … 3.70 kVA

10 VA

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

±(0 VAr … 999) VAr

1 VAr

±(5 % of reading + 5 D)

±(1.00 kVAr … 3.70) kVAr

10 VAr

± 5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

0.00i … 1.00i 0.00c … 1.00c

0.01

±(5 % of reading + 5 D)

FUNCTION

Measuring range

Resolution

Accuracy

THDU

0.0 % … 99.9 %

0.1 %

±(5 % of reading + 5 D)

FUNCTION

Measuring range

Resolution

Accuracy

THDI

0.00 A … 16.00 A

0.01 A

±(3 % of reading + 5 D)

Differential Leakage current

PE leakage current

Touch leakage current

Power (active) @ Idiff / Ipe / Itou

Power Power (active)

Power (Apparent)

Power (Reactive)

Power factor

Total Harmonic Distortion (voltage)

Total Harmonic Distortion (current)

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 7

Cosinus Fi FUNCTION

Measuring range

Resolution

Accuracy

Cos FI

0.00i … 1.00i 0.00c … 1.00c

0.01

±(5 % of reading + 5 D)

FUNCTION

Measuring range

Resolution

Accuracy

0.00 A … 16.00 A

0.01 A

±(3 % of reading + 5 D)

FUNCTION

Measuring range

Resolution

Accuracy

0.0 V … 199.9 V

0.1 V

±(3 % of reading + 10 D)

200 V … 264 V

±3 % of reading

Current

Voltage

(P)RCD test (Type RCD: AC, A, F, B, B+), test current (10mA, 15mA, 30mA) / test current (100mA, 300mA with: A 1322, A 1422) Trip-out time FUNCTION

Measuring range

tΔN

0 ms … 300 ms (999 ms*) (½xIΔN) 1 ms

±3 ms

0 ms … 300 ms (IΔN)

1 ms

±3 ms

0 ms … 40 ms (5xIΔN)

1 ms

±3 ms

FUNCTION

Measuring range

Resolution

Accuracy

IΔ

0.2xIΔN … 2.2xIΔN

0.05xIΔN

±0.1xIΔN

FUNCTION

Measuring range

Resolution

Accuracy

0.0 V … 19.9 V

0.1 V

(-0 % / +15 %) of reading  10 D

20.0 V … 99.9 V

0.1 V

(-0 % / +15 %) of reading

*According to standard AS/NZS 3017

Resolution

Accuracy

Trip-out current

Contact voltage (RCD test only)

Additional PRCD tests PE conductor (Type = 2 pole, 3 pole, S(3 pole)) FUNCTION

Measuring range

Resolution

Accuracy

Riso Riso-S

0.00 Ω … 19.99 Ω

0.01 Ω

±(2 % of reading + 2 D)

20.0 Ω … 99.9 Ω

0.1 Ω

±3 % of reading

100.0 Ω … 199.9 Ω

0.1 Ω

±5 % of reading

200 Ω … 999 Ω

1Ω

indicative

PE conductor (Type = K/ Di (varistor)), A voltage is applied between PE connections of the PRCD-K. There is a ‘PASS’ if PRCD trips. Open conductor PRCD, Mains voltage is applied to the mains test socket. Disconnection of the L, N and PE connections is performed inside the instrument. There is a ‘PASS’ if the PRCD trips. PRCD PE probe test, Mains voltage is applied to the mains test socket. A safe voltage sufficiently high to activate the protection circuit in the PRCD is applied to the P/S terminal. Polarity, Test voltage (normal) < 50 V / Test voltage (active) mains voltage Clamp current, True RMS current using 1000:1 current clamp FUNCTION

Measuring range

Resolution

Accuracy

I Idiff Ipe

0.10 mA … 9.99 mA

0.01 mA

±(5 % of reading + 10 digits)

10.0 mA … 99.9 mA

0.1 mA

±(5 % of reading + 5 digits)

100 mA … 999 mA

1 mA

±(5 % of reading + 5 digits)

1.00 A … 9.99 A

0.01 A

±(5 % of reading + 5 digits)

10.0 A … 24.9 A

0.1 A

±(5 % of reading + 5 digits)

FUNCTION

Measuring range

Resolution

Accuracy

0.00 mA … 2.50 mA

0.01 mA

*(5 % of reading + 5 D)

Accuracy of current transformer is not considered. Frequency range of current clamp is not considered. Flash test (1500V, 3000V), Current a.c. (apparent)

Open circuit voltage: 1500 V, 3000 V (-0/+5%) @ 115 V, 230 V / Short circuit current: < 3.5 mA Riso 500 V Medical equipment FUNCTION

Measuring range

Resolution

Accuracy

Riso

0.00 MΩ … 19.99 MΩ

0.01 MΩ

±(3 % of reading + 2 D)

20.0 MΩ … 199.9 MΩ

0.1 MΩ

±5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

0 V … 600 V

±(3 % of reading + 2 D)

3. 8

Accessories 3.34

Output voltage

Equipment leakage current, Medical equipment (direct, differential, alternative) FUNCTION

Measuring range

Resolution

Accuracy

Ieq

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

±(5 % of reading)

FUNCTION

Measuring range

Resolution

Accuracy

Ulpe

0 V … 299 V

±(2 % of reading + 2 D)

FUNCTION

Measuring range

Resolution

Accuracy

0 W … 999 W

±(5 % of reading + 5 D)

1.00 kW … 3.70 kW

10 W

±5 % of reading

Ulpe (direct, differential, alternative)

Power (direct, differential)

Applied Part leakage current, Medical equipment (direct, alternative) FUNCTION

Measuring range

Resolution

Accuracy

Iap

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

±(5 % of reading)

FUNCTION

Measuring range

Resolution

Accuracy

Uap

0 V … 299 V

±(2 % of reading + 2 D)

FUNCTION

Measuring range

Resolution

Accuracy

0 W … 999 W

±(5 % of reading + 5 D)

1.00 kW … 3.70 kW

10 W

±5 % of reading

FUNCTION

Measuring range

Resolution

Accuracy

Itou

0.000 mA … 1.999 mA

1 µA

±(3 % of reading + 3 D)

2.00 mA … 19.99 mA

0.01 mA

±(5 % of reading)

FUNCTION

Measuring range

Resolution

Accuracy

Ulpe

0 V … 299 V

±(2 % of reading + 2 D)

FUNCTION

Measuring range

Resolution

Accuracy

0 W … 999 W

±(5 % of reading + 5 D)

1.00 kW … 3.70 kW

10 W

± 5 % of reading

Uap (direct, alternative)

Power (direct)

Touch current (Medical equipment)

Ulpe (direct)

Power (direct)

Measurements for electrical welding equipment per IEC/EN 60974-4 (Welding equipment) optional with A 1422 Insulation resistance Riso (Welding equipment) Welding Circuit leakage (Ileak W-PE), (Welding equipment) Primary Leakage (I diff), (Welding equipment) No-load voltage, (Welding equipment)

GENERAL DATA

STANDARDS

Mains supply Supply voltage, frequency 110 V / 230 V AC, 50 Hz / 60 Hz Max. load 10 A continuous, 16 A short duration, 1.5 kW motor Mains supply overvoltage category CAT II / 300V Altitude ≤ 2000 m Measuring categories Instrument: Cat II / 300 V Test socket: Cat II / 300 V Plug test cable: Cat II / 300 V Protection classifications Degree of protection IP 40 / IP 20 (mains test socket) Display Colour TFT display, 4.3 inch, 480 x 272 pixels Touch screen Capacitive Communication Memory depends on microSD card size RS232 interfaces 2 USB 2.0 Standard USB Type B Bluetooth Class 2 Dimensions 310 × 130 × 250 mm Weight 6.1 kg Operation conditions Working temperature range: 0 °C … +40 °C Maximum relative humidity: 85 % RH (0 °C … 40 °C), non-condensing

Functionality • EN 50699; • EN 50678; • VDE 0701-0702; • NEN 3140; • AS/NZS 3760; • IET COP 5th Ed.; • IEC/EN 62353 (VDE 0751); • IEC/EN 60974-4 (VDE 0544-4)

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 9

SUPPORTED INSTRUMENTS Due to the differences in testing standards globally, it has becoming increasingly important for manufacturers to ensure that their products are safe for the consumer and industrial markets. Depending on the application Metrel offers different sets in combination of tester plus accessories. Measuring function

MI 3360

MI 3360 25A

MI 3360 M

MI 3360 F

Visual inspections

•

Fuse test

•

Continuity // Protective earth resistance 200mA

•

Continuity // Protective earth resistance 10A, 25A Insulation Resistance (Riso, Riso-S),

•

Substitute Leakage Current, Substitute Leakage Current - S

•

Differential Leakage current

•

PE leakage current

•

Touch leakage current

•

Polarity / Active polarity test

•

Power (P, S, Q, PF, THDu, THDi, CosØ, I, U)

•

P-RCD, (2 pole, 3 pole, K/ Di (varistor), S (3-pole))

•

PRCD PE probe test, open conductor test, PE conductor test

•

RCD test, (type A, AC, B, B+, F)

•

Flash test, (1500V, 3000V)

•

Insulation resistance, IEC/EN 62353

•

Touch leakage current, IEC/EN 62353

•

Equipment leakage (direct, differential, alternative) IEC/EN 62353

•

Applied part leakage (direct, alternative), IEC/EN 62353

•

Insulation resistance, (optional A 1422) IEC/EN 60974-4

•

Welding circuit leakage, (optional A 1422) IEC/EN 60974-4

•

Primary leakage, (optional A 1422) IEC/EN 60974-4

•

No-load voltage, (optional A 1422) IEC/EN 60974-4

•

Clamp current (with optional A 1579)

•

Notes: • IEC/EN 60974-4 Clamp current leakage

in combination with optional accessories, measurements are supported with active 3-phase adapter A 1422 only, measurements are supported with optional clamps A 1579

WHY TEST PORTABLE APPLIANCES? The need for portable and fixed appliance testing is becoming more profound, since devices such as air conditioning units, hand dryers, electrical heaters and many more similar ones have become ubiquitous. But, with frequent use come heightened risks for mechanical an electrical failures. Current legislation therefore dictates, that all devices in public use require periodic testing to determine their safety. If they are damaged, they can cause a fire or even death through electrocution. We have prepared four different models of the MI 3360 OmegaGT XA to cover the entire spectrum of testing applications and give the user greater flexibility.

3. 10

Accessories 3.34

ORDERING INFORMATION STANDARD SET MI 3360 • Instrument MI 3360 (25A, M, F) OmegaGT XA • Bag for accessories • Smartball pen with touch screen function • Flash test probe (MI 3360 F only) • Crocodile clip, red (MI 3360 F only) • Crocodile clip, black • IEC test cable, 2 m • Test lead, black • Test tip, black • Mains cable • USB cable • Calibration Certificate • Short form instruction manual • CD with instruction manual (full version) • PC SW Metrel ES Manager BASIC* * Metrel ES Manager can be downloaded free of charge from Metrel Web server.

The MI 3360 OmegaGT XA is intended for testing applications, that don’t require a more robust testing of continuity, such as public institutions, hotels, schools etc. where used electrical devices fall mainly in I, II and III protection classes. But, despite limited functionality the instrument supports both (optional) 3-phase adapters.

The MI 3360 25A OmegaGT XA is intended for more demanding testing applications that encompass devices in environments such as construction sites, factories, electrical equipment rental services etc. where they are subjected to increased mechanical and electrical loads and therefore require more robust testing of continuity. Besides standard 200 mA, the instrument also offers 10 A and 25 A continuity testing.

The MI 3360 M OmegaGT XA is intended for testing of medical devices, since all supported tests are in accordance with IEC/EN 62353. Special emphasis is given on accurate testing of leakage current

The MI 3360 F OmegaGT XA is intended for testing of portable appliances after repair or maintenance with HV voltage tests with 1500 V or 3000 V for added assurance.

KEY FEATURES

• • • • •

• • • •

Single tests; AUTOSEQUENCE®s; Automatic PASS/FAIL evaluation; Printing of test reports; 8 GB memory card for saving test data; Label printing; Scanning of QR and barcodes; Use of aMESM Android app for scanning QR codes; PRCD testing.

• • • • • •

Single tests; AUTOSEQUENCE®s; Automatic PASS/FAIL evaluation; Printing of test reports; 8 GB memory card for saving test data; Label printing (serial or Bluetooth); Scanning of QR and barcodes (serial or Bluetooth); 3-phase device testing with A 1322 / A 1422; 3-phase extension cord testing; PRCD testing; Welding equipment testing (A 1422) in accordance with IEC/EN 60974-4 (option).

Measuring and Regulation Equipment Manufacturer

Single tests; AUTOSEQUENCE®s; Automatic PASS/FAIL evaluation; Printing of test reports; 8 GB memory card for saving test data; • Label printing (serial or Bluetooth); • Scanning of QR and barcodes (serial or Bluetooth); • Testing of electrical medical devices in accordance with IEC/EN 62353.

Accessories 3.34

Single tests; AUTOSEQUENCE®s; Automatic PASS/FAIL evaluation; Printing of test reports; 8 GB memory card for saving test data; • Label printing (serial printer); • Scanning of QR and barcodes (serial scanner); • Testing of electrical devices in service.

3. 11

Appliance / Machine / Switchboard Safety

GT testers MI 3309 BT DeltaGT The MI 3309 BT DeltaGT is both battery and mains powered multifunctional instrument intended to perform measurements for testing the electrical safety of portable electrical equipment. Integrated unique PRCD testing technology prevents tripping out of mains RCD during measurement. Due to dual power capability of MI 3309 it enables performing of differential leakage current test in spite of its lightweight portable design. Large graphical LCD with backlight, two PASS / FAIL LED indicators and HELP screens for each measurement make the handling of the instrument clear and simple. Up to 1500 test results with parameters can be stored in the internal memory of the instrument and then downloaded to the PC for further data handling and creation of test report. Lightweight design, pre-programmed and custom test sequences, optional barcoding, android keyboard application and RFID systems make the MI 3309 an ideal instrument for high volume professional safety testing of portable appliances.

MEASURING FUNCTIONS • • • • • • • • • • • • • •

Functional and visual inspection; Earth bond resistance; Insulation resistance; Insulation resistance of isolated accessible conductive parts; Substitute leakage current; Substitute leakage current of isolated accessible conductive parts; Differential leakage current test; Touch leakage test; RCD and portable RCD testing, type (K, S); Power test; IEC cord polarity test; Leakage and load currents with current clamp; TRMS voltage meter; Enhanced TRMS test.

KEY FEATURES • Autosequencing: pre-programmable VDE compatible autosequences, up to 50 custom prepared autosequences and barcode autotests speed up testing and ensure that no tests are missed. • Dual powered: the instrument can operate from mains power or batteries. • PASS / FAIL: large green and red lights

3. 12

• •

• • • •

• • •

for additional PASS / FAIL indication placed at the sides of the LCD. Fixed appliance testing: additional inputs and optional accessories enable testing of fixed installed appliances. Scan and test: optional QR or barcoding system and PASS / FAIL QR or barcode label printing make retesting quick and simple. RFID: support for advanced RFID identification system. RCD testing: instrument enables testing of parameters of RCDs and portable RCDs. Memory: large data flash memory allows to store up to 1500 test results and parameters for further downloading to PC. Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. Bluetooth: enables communication with PC, printers, and android devices. Android application: enables advanced data management, use of smart phones camera for scanning QR and bar-code. PC SW Metrel ES Manager: included in the standard set enables downloading, viewing, printing of test results, creation of user-defined AUTOSEQUENCE®s,

Accessories 3.34

and exporting of data to spreadsheet applications. Printing of PRO reports and professional export to excel is available with a PRO license.

APPLICATION • Professional GT safety testing; • General GT safety testing; • After repair GT safety testing.

STANDARDS Functionality • EN 50699; • EN 50678; • VDE 0701-0702; • NEN 3140; • AS/NZS 3760; • IET COP 5th Ed; • EN 61557 Electromagnetic compatibility • EN 61326 Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

PE continuity (200 mA)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(5 % of reading + 3 digits) Indication only Indication only

Insulation resistance (250 VDC, 500 VDC)

0.00 MΩ … 19.99 MΩ 20.0 MΩ … 49.9 MΩ 50.0 MΩ … 199.9 MΩ

0.01 MΩ 0.1 MΩ 0.1 MΩ

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) Indication only

Substitute leakage current (30 VAC)

0.00 mA … 9.99 mA 10.0 mA … 20.0 mA

0.01 mA 0.1 mA

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Touch leakage current

0.00 mA … 7.00 mA

0.01 mA

±(10 % of reading + 5 digits)

Differential leakage current

0.00 mA … 19.99 mA

0.01 mA

±(5 % of reading + 5 digits)

Functional test: apparent power

0.00 kVA … 4.00 kVA

0.01 kVA

±(5 % of reading + 3 digits)

RCD and portable RCD: trip-out time (IΔN= 10 mA, 15 mA, 30 mA)

0 ms … 300 ms (½xI∆N) 0 ms … 300 ms (I∆N) 0 ms … 40 ms (5xI∆N)

0.1 ms 0.1 ms 0.1 ms

±3 ms ±3 ms ±1 ms

Clamp current

0.00 mA ... 9.99 mA 10.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 9.99 A 10.0 A ... 16.0 A

0.01 mA 0.1 mA 1 mA 0.01 A 0.1 A

±(5 % of reading + 10 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits)

Voltage TRMS

80 V ... 300 V

±(2 % of reading + 2 digits)

Polarity test

Test voltage < 50 VAC

Enhanced TRMS test (Detects: No live, active neutral reversal, N fault, PE fault, Multiple fault) Voltage UL-N, UL-PE, UN-PE

80 V ... 300 V

±(2 % of reading + 2 digits)

R Loop

0.00 kΩ … 1.99 kΩ

0.01 kΩ

±(10 % of reading + 5 digits)

GENERAL 6 x 1.2 V NiMH rechargeable batteries, type AA; 230 V, 50 Hz / 60 Hz

Overvoltage category

CAT II / 300 V

COM port

RS232, USB and Bluetooth

Dimensions

140 x 80 x 230 mm

Weight

1.2 kg

STANDARD SET

• USB cable • NiMH rechargeable batteries, type AA, 6 pcs • Instruction manual on storage media • Short instruction manual • Calibration certificate

MI 3309 • Instrument MI 3309 BT DeltaGT • Small soft carrying bag • IEC cable, 2 m, 2 pcs • Test lead, black, green, brown, 1.5 m • Crocodile clip, black, green, brown • Test probe, black, green, brown • PC software Metrel ES Manager • RS232 cable

Measuring and Regulation Equipment Manufacturer

Picture of MI 3309 set

Power supply

Accessories 3.34

3. 13

Appliance / Machine / Switchboard Safety

GT testers MI 3311 GammaGT The MI 3311 GammaGT is a battery powered multifunctional instrument intended to perform measurements for testing the electrical safety of portable electrical equipment. Due to large graphical LCD with backlight, two PASS / FAIL LED indicators and HELP screens for each measurement the handling of the instrument is clear and simple. Up to 1500 test results with parameters can be stored in the internal memory of the instrument and then downloaded to the PC for further data handling and creation of test report. Lightweight design, pre-programmed and custom test sequences, optional barcoding, android keyboard application and RFID systems and built-in calibration unit make the MI 3311 an ideal instrument for high volume professional safety testing of portable appliances. READY

• Autosequencing: pre-programmable VDE compatible autosequences, up to 50 custom prepared autosequences and barcode autotests speed up testing and ensure that no tests are missed. • Checkbox: built-in calibration unit performs calibration of the instrument and the calibration results are automatically stored into instrument’s memory. • PASS / FAIL: large green and red lights of the LEDs indicate a PASS or FAIL evaluation of test result. • Scan and test: optional QR or barcoding system and PASS / FAIL QR or barcode label printing make retesting quick and simple.

• RFID: support for advanced RFID identification system. • User friendly: large LCD screen, two Pass / Fail LED indicators, help screens and warnings make the instrument an extremely easy to use. • Multi-tasking: instrument performs continuity test, 250 V and 500 V insulation tests, substitute leakage measurement, functional and polarity tests. • Memory: up to 1500 test results with measuring parameters can be stored in two level memory and downloaded to the PC with the help of PC SW PATLink PRO. • Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. • Android application: enables advanced data management, use of smart phones camera for scanning QR and bar-code. • PC SW PATLink PRO enables downloading, viewing, printing of test results and exporting of data to spreadsheet applications. • PC SW PATLink PRO Plus enables advanced analysis of test results, upload of pre-programmed custom autosequences and creation of professional test reports.

3. 14

Accessories 3.34

MEASURING FUNCTIONS • Continuity test with 200 mA; • Insulation resistance; • Insulation resistance of isolated accessible conductive parts; • Substitute leakage current; • Substitute leakage current of isolated accessible conductive parts; • IEC cord polarity test; • TRMS voltage; • Functional and visual inspection.

KEY FEATURES

APPLICATION • Professional GT testing; • General GT testing; • After repair GT safety testing.

STANDARDS Functionality • EN 50699; • EN 50678; • VDE 0701-0702; • AS/NZS 3760; • IET COP 5th Ed. Electromagnetic compatibility • EN 61326 Safety • EN 61010-1; • EN 61010-031

TECHNICAL DATA Measuring range

Resolution

Accuracy

PE continuity (200 mA)

0.00 Ω … 19.99 Ω 20.0 Ω … 199.9 Ω 200 Ω … 1999 Ω

0.01 Ω 0.1 Ω 1Ω

±(5 % of reading + 3 digits) Indication only Indication only

Insulation resistance (250 VDC, 500 VDC)

0.00 MΩ … 19.99 MΩ 20.0 MΩ ... 49.9 MΩ 50.0 MΩ ... 199.9 MΩ

0.01 MΩ 0.1 M Ω 0.1 M Ω

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) Indication only

Substitute leakage current

0.00 mA … 9.99 mA 10.0 mA … 20.0 mA

0.01 mA 0.1 mA

±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits)

Voltage

0 V … 300 V

±(2 % of reading + 2 digits)

Polarity test

Test voltage < 50 VAC

Power supply

6 x 1.2 V NiMH rechargeable batteries, type AA

Overvoltage category

CAT II / 300 V

COM port

RS232, USB and Bluetooth (optional A 1436 BT dongle)

Dimensions

140 x 80 x 230 mm

Weight

0.86 kg

STANDARD SET

• Instruction manual • Calibration certificate

MI 3311 • Instrument GammaGT • Small soft carrying bag • IEC cable, 2 m • Test probe, black • Test lead, black, 1.5 m • Crocodile clip, black • Power supply adapter • NiMH rechargeable batteries, type AA, 6 pcs

Measuring and Regulation Equipment Manufacturer

Picture of MI 3311 set

FUNCTION

Accessories 3.34

3. 15

Appliance / Machine / Switchboard Safety

Other instruments / Adapters / Accessories A 1322 and A 1422 Active 3-phase Adapter Metrel’s A 1322 Multifunctional test adapter is designed for troubleshooting, as well as for periodic testing on 3-phase appliances and machinery. Unique functions such as, active polarity testing, differential leakage testing and testing of 3-phase RCD’s make the A 1322 Active 3-phase Adapter an ideal instrument for advanced applications. The A 1322 adapter is designed for use alongside the MI 3360 OmegaGT, enabling functional tests to be carried out on machines up to 40 A. Several test socket outlets make this instrument an ideal tester for testing industrial extension leads that may also be RCD protected. The A 1422 Multifunctional test adapter has complete support for testing of Arc Welding Equipment in accordance to EN 60974-4 and VDE 0544-4.

APPLICATION

• Testing of Open-Circuit Voltage at ARC Welding Units in accordance to EN 60974-4 (A 1422 only); • All tests on 3-phase electrical equipment can be carried out, including live leakage test, power, polarity, RCD and Active polarity; • Simple connection to the GT/MACHINE tester with automatic detection; • Simple test procedures, identical to single phase equipment; • Test sequence for 3-phase tests are automatically set, based on entered test codes and input voltages; • Built-in CEE 3-PH/32A 5 pin, CEE 3-PH/16A 5 pin and CEE 1-PH/16A 3 pin test sockets; • Instrument comes complete with all accessories necessary for comfortable measurements and kept in a robust waterproof case.

• Testing of single and 3-phase ARC Welding equipment (A 1422 only); • Professional 3-PH portable appliance testing; • Professional 3-PH machine testing.

3. 16

Accessories 3.34

STANDARDS Functionality • IEC/EN 60974-4 (VDE 0544-4), (A 1422 only); • EN 50699; • EN 50678; • VDE 0701-0702; • IEC/EN 60204-1 Ed.5 (VDE 0113-1); • IEC/EN 61439-1 (VDE 0660-600-1); • AS/NZS 3760; • NEN 3140; • IET COP 5th Ed Electromagnetic compatibility • EN 61326-1 Safety • EN 61010-1; • EN 61010-031

STANDARD SET A 1322 • Active 3-Phase Adapter • Bag for accessories • Connection cable between Adapter and Instrument • 3-phase mains cable 16 A male / 32 A female, 5 pin, 2 m • RS232 cable • Instruction manual, short instruction manual • Calibration certificate A 1422 • Test lead, 1.5 m, (blue, red) • Test probe, (blue, red)

Picture of MI 1422 set

KEY FEATURES

TECHNICAL DATA FUNCTION

Measuring range

Resolution

Accuracy

Differential leakage current (230/400 VAC or 120/208 VAC)

0.00 mA … 9.99 mA

0.01 mA

±(5 % of reading + 5 digits)

Power / Functional test (230/400 VAC or 120/208 VAC)

0.00 kVA … 24.29 kVA

0.01 kVA

±(5 % of reading + 5 digits)

Active power readout

0.00 kW … 24.29 kW

0.01 kW

±(5 % of reading + 5 digits)

Reactive power readout

0.00 kVAr … 24.29 kVAr

0.01 kVAr

±(5 % of reading + 5 digits)

Power factor readout

0.00 … 1.00

0.01

±(5 % of reading + 5 digits)

3-phase RCD / Test current (10 mA, 15 mA, 30 mA, 100 mA, 300 mA) Type (AC, A, B)

0 ms … 300 ms (½ x I∆N, I∆N ) 0 ms … 150 ms (2 x I∆N) 0 ms … 40 ms (5 x I∆N)

1 ms 1 ms 1 ms

±3 ms ±3 ms ±3 ms

Portable RCD trip-out current readout (B type PRCD)

0.2 x I∆N … 2.2 x I∆N

0.05 x I∆N

±0.1 x I∆N

Power supply

230 V ±10 %

Overvoltage category

CAT II / 300 V

Protection class

COM port

RS232

Dimensions

335 x 160 x 335 mm

Weight

7.2 kg 0.00 mA ... 14.99 mA

0.01 mA

±(5 % of reading + 5 digits)

0.0 A ... 199.9 mA 0.0 A ... 139.9 mA

0.1 A 0.1 A

±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits)

A 1422 (only) Welding circuit leakage current; Primary leakage current readout No load voltage readout; (AC peak or DC peak) (AC RMS)

KEY FEATURES A 1322 and A 1422 Earth bond / continuity resistance 200 mA Earth bond / continuity resistance 4A / 10A / 25 A Insulation resistance Insulation resistance – s Substitute leakage current Substitute leakage – s Differential leakage current 3-phase differential leakage current Touch leakage current Polarity test Active polarity test 3-phase polarity test / 3-phase active polarity test P/RCD test, type (AC, A, B) 3-phase P/RCD test, type (AC, A, B) Power / functional test (P, S, Q) 3-phase power / functional test (P, S, Q) A 1422 (only) Continuity test (according to IEC/ EN 60974-4) Insulation resistance (according to IEC/ EN 60974-4) Leakage current (according to IEC/ EN 60974-4) No load voltage (according to IEC/ EN 60974-4) 1

MI 3360 • - /•1 / •1 • • • • • • • • • • • • • •

MI 3325 • •/•/• • • • • • • • • • • • • • •

• • • •

3360 25A, M, F

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 17

Good to know Testing the Safety of Machines and Switchboards Find out more about testing safety of machines. Typical hazardous situations related to electrical equipment are: • failures or faults in the electrical equipment resulting in the possibility of electric shock or electrical fire; • failures or faults in control circuits resulting in the malfunctioning of the machine; • disturbances or disruptions in power sources as well as failures or faults in the power circuits resulting in the malfunctioning of the machine; • loss of continuity of circuits that depends on sliding or rolling contacts, resulting in failure of a safety function; • electrical disturbances either from outside the electrical equipment or internally generated, resulting in the malfunctioning of the machine; • release of stored energy (either electrical or mechanical) resulting in electric shock or unexpected movement that can cause injury; • audible noise at levels that cause health problems to persons; • surface temperatures that can cause injury. To verify the electrical safety of machines the appropriate measurements should be performed: • after erection of machine; • after installation of machine; • after upgrading or changing of machine; • and during periodic retests of machine. Verification of safety of machines According to IEC/EN 60204, Ed.5 verification of electrical safety of machines is performed by inspection and measurements: • Inspection that the electrical equipment complies with its technical documentation; • Verification of protection against indirect contact by automatic disconnection; • Insulation resistance test; • High voltage test; • Protection against residual voltages; • Functional tests. Safety - measurements: Visual test A visual check must be carried out before each electrical safety test. The visual inspection discloses most of faults!

Check of: • Wiring connection points. Especially PE connections are important! • Protection covers, housings • Inscriptions and markings related to safety must be clearly readable. • Cable layout, radiuses, isolation • Switches, regulators, lamps, keys • Parts subjected to wear out • Electrical and mechanical protection devices (barriers, switches, fuses, alarms) • Openings, filters • Technical documentation, instructions for use available • Installation of the appliance must be performed according to the user manuals. • During visual inspection the measuring points for the electrical testing have to be determined too.

Size of test current should be between at least 0.2 A and approximately 10 A Higher currents are preferred, especially for low resistance values, i.e. larger cross sectional areas and/or lower conductor length.

Check that there are no signs of: • Damage • Pollution, moisture, dirt that can jeopardize safety • Corrosion • Overheating

Insulation resistance test This test discloses faults caused by pollution, moisture, deterioration of insulation metal, etc.

Verification of protection against indirect contact by automatic disconnection This verification step is quite complex and must always be carried out in some form. The standard EC/EN 60204, Ed.5 allows simplified testing procedures regarding to the status of machine. The status of the machine can be selected on base of: • Condition of supplied machine (dismantled, fully assembled); • Technical documentation (availability of existing verification report of electrical wiring of machine); • Length of conductors after installation; • Incoming supply characteristics - loop impedance. How to select the appropriate machine status and test extent is described in EN/ IEC 60204, Table 9. Once the machine status and test extent are defined the limits for the Continuity and/or ZLOOP test should be defined. Continuity test This test determines that the PE and equipotential connections inside the machine have proper resistance that corresponds to their length and crosssection.

A thorough visual check must be carried out before each electrical safety test.

3. 18

Accessories 3.34

Before continuity measurement test leads compensation is required to eliminate the influence of test leads resistance and instrument’s internal resistance.

Continuity test

Insulation resistance between live conductors and accessible (earthed or isolated) metal parts is checked.

Insulation resistance test

Components and devices that are not rated to withstand the test voltage shall be disconnected during the testing. Lower test voltages should be used for sensitive electronic equipment and surge protective devices. High voltage withstanding test The HV withstanding test is used to confirm integrity of the insulation materials. During the test the insulation materials in the machine are stressed with a higher voltage than during normal operation. A powerful AC high voltage source is applied between the live/ neutral input terminals and the metal housing of the machine. The instrument trips out if the leakage current exceeds the predefined limit.

HV withstanding test

Components and devices that are not rated to withstand the test voltage shall be disconnected during the testing. Components and devices that have been voltage tested in accordance with their product standards may be disconnected during testing. Loop impedance and prospective fault current The instrument measures the impedance of the fault loop and calculates the prospective fault current. The results can be compared to limit values set on base of selected protective circuit breakers or RCDs. The measurement complies with requirements of the standard EN 61557-3.

RCD testing Various test and measurements are required for verification of RCDs in RCD protected machines. Measurements are complies to the EN 61557-6 standard.

Live parts having a residual voltage greater than 60 V after the supply has been disconnected, shall be discharged to 60 V or less within a time period of 5 s after disconnection of the supply.

The following measurements and tests can be performed: • Contact voltage, • Trip-out time, • Trip-out current, • RCD autotest.

For plugs or similar devices with exposed conductors (for example pins) if plugged out it shall be discharged to 60 V or less within a time period of 1 s after disconnection of the supply.

Discharge time test Testing of RCD in RCD protected machine

Testing of RCD in electrical installation

Loop impedance test

Discharge Time If large capacitors in machines are disconnected from supply there is often a remaining (residual) charge on internal machine components.

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

Functional test Functional check explores if the machine is working properly. Following items should be checked while the machine is operating: • Temperature regulators, monitors; • RCDs and other disconnection devices; • Operation of functional disconnecting devices; • Operation of switches, lamps, keys; • Rotating parts, motors, pumps; • Power consumption, etc.

3. 19

Machine and switchboard testers Selection Guide for Machines and Switchboards Testers FEATURES

Description

MI 3394 CE MultiTesterXA

MI 3325 MultiServicerXD

MEASUREMENTS

Withstanding test 1000 VAC Withstanding test 1890 VAC Withstanding test 2200 VAC Withstanding test 100 ... 5100 VAC (500 VA) Withstanding test 500 ... 6000 VDC Continuity 200 mA Continuity 4 A Continuity 10 A Continuity 25 A Insulation resistance 50 VDC Insulation resistance 100 VDC Insulation resistance 250 VDC Insulation resistance 500 VDC Insulation resistance 1000 VDC Differential leakage current Touch leakage current Substitute leakage current PE leakage Discharge time Leakage current measurement with optional clamp RCD, (PRCD testing, optional via 3PH adapter) Line impedance Loop impedance Voltage measurement Frequency measurement Phase rotation indication Polarity test (IEC lead test) Functional (load) test PASS / FAIL evaluation Mains supply auto check Graphical LCD / Colur touch LCD Graphical on-line help Backlight Real time clock QWERTY keyboard Auto testing (organizer, custom autotests) Barcode shortcut auto testing Communication ports RS232 / USB / Bluetooth / Ethernet “Test and tag” (barcode scanner + label printer) Data download to PC Project upload from PC to instrument Memory Barcode scanner / RFID / NFC Label printer Metrel ES Manager Power supply Weight Dimensions (mm)

• • • • • • • • • • • • • • • • • • •

• • • • (250 VA)

ADITIONAL FEATURES

STANDARD / OPTIONAL ACCESSORIES GENERAL DATA

3. 20

Accessories 3.34

•

• • • •/• • • • Option • Option •/•/•/• • • up to (32 GB) Option / Option / Option Option • 115 V / 230 V 17 kg 435 x 155 x 292

• • • • • • • • • • • • • • • • • • • • • • • • • •/• • • • • • • •/•/• /• • • • up to (32GB) Option / Option / Option Option • 115 V / 230 V 13,3 kg / 15,1 (with accesories) 420 x 235 x 250

Appliance / Machine / Switchboard Safety

Machine and switchboard testers Rack mount adapter MI 3394 CE MultiTesterXA is a premium GT tester and undoubtedly the most advanced such product on the market today, offering great versatility in a variety of testing applications. Part of that adaptability is the option to use the instrument in the standalone mode or mounted in a rack, as a part of a larger testing line. Many of our customers have expressed greater interest in the latter and have reached to us for an adaptable mounting solution, for a variety of racks.

For them, we have designed two rack mount adapters, intended to be used with RITAL square hole racks, but also suitable for a number of third-party racks. The A 1584 Rack mount adapter for MI 3394 CE MultiTesterXA enables the mounting of the said instrument, while the A 1586 Rack mount adapter for A 1460 CE Adapter ensures that this useful accessory is close to the instrument and can be easily connected at the back. A 1584 Rack mount adapter for MI 3394 CE MultiTesterXA

A 1586 Rack mount adapter for A 1460 CE Adapter

A 1584 is a rack mount adapter for 19” rack, which is designed to hold the MI 3394 CE MultiTesterXA. This product kit includes the parts needed for complete and easy installation of the adaptor kit in RITAL square hole racks, and some third-party racks.

A 1586 is a rack mount adapter for 19” rack, which is designed to hold the A 1460 CE Adapter. This product kit includes the parts needed for complete and easy installation of the adaptor kit in RITAL square hole racks, and some third-party racks.

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 21

Appliance / Machine / Switchboard Safety

Machine and switchboard testers MI 3394 CE MultiTesterXA The MI 3394 CE MultiTesterXA is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production. The instrument features in strong data management facility enabling the user to create custom auto-tests with predefined limits for pass/fail evaluation, to import predefined structure including test sequences or complete projects from PC software, plus strong memory organizer. The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file, printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.

MEASURING FUNCTIONS • • • • • • • • • •

High Voltage, programmed (AC/DC). High Voltage, burn test (optional A 1560) Continuity tests. Insulation resistance measurement. Substitute leakage current. Differential leakage current. Touch leakage current. PE-leakage current. Discharge time. Functional test (power P/S/Q, voltage, current, cos fi, frequency, ThdU, ThdI,PF).

KEY FEATURES • Data management: the instrument features in unique user friendly data management facility and state of the art memory organizer. • Multiple test terminals: different test terminals enabling the user to choose from performing single tests or

3. 22

autosequences from single test socket. • MicroSD: support for microSD memory card (8-GB supplied with the instrument) up to 32GB. • High resolution colour touch screen, 4.3” TFT. • Hi-pot: high voltage AC (5.1kV at 500VA) and DC (6kV) test. • Continuity: 4 – wire continuity test with selectable test current (0.2 A, 4 A, 10A, 25A) enabling precise measurements. • Communication: 4 – RS232, USB, Ethernet and Bluetooth communication ports enabling downloading, uploading and remote control over instrument. • Multi-system testing: the instrument can be used on TT, TN, IT and 115 V supply systems.

APPLICATION • Laboratories, • Automated production lines, • Specialized workshops.

Accessories 3.34

STANDARDS Functionality • IEC/EN 60335; • IEC/EN 60204-1 Ed.5 (VDE 0113-1); • IEC/EN 61439-1 (VDE 0660-600-1); • IEC/EN 62368-1 (IEC/EN 60950-1); • IEC/EN 60598; • IEC/EN 61010; • IEC/EN 61180; • EN 50191 (BGI 891); • EN 50699; • EN 50678; • VDE 0701-0702; • AS/NZS 3760; • NEN 3140; • IET COP 5th Ed Electromagnetic compatibility • EN 61326-1 Safety • EN 61010-1; • EN 61010-2-030; • EN 61010-031; • EN 61557

TECHNICAL DATA FUNCTION

Measuring range

Resolution

HVAC, Programmable HV AC, Output voltage, 100 V - 5100 V / 10 V steps (Floating to earth) - Test voltage (AC) 0 ... 1999 V 1V 2.00 ... 5.99 kV 10 V - Test current apparent 0.0 ... 99.9 mA 0.1 mA - Capacitive 0.0 mA ... 99.9 mA 0.1 mA - Resistive -99.9 mA ... 99.9 mA 0.1 mA - Short circuit current > 200 mA - Output power 500 VAmax HV DC, Programmable HV DC, Output voltage, 500 V -6000 V / 50 V steps(Floating to earth) - Test voltage (DC) 0 ... 1999 V 1V 2.00 ... 6.99 kV 10 V - Test current 0.01 ... 9.99 mA 0.01 mA Discharging time -t 0.0 ... 9.9 s 0.1 s - Up 0 ... 550 V 1V Continuity (0.2A, 4A, 10A, 25A) -R 0.00 Ω ... 19.99 Ω 0.01Ω 20.0 Ω ... 99.9 Ω 0.1Ω 100.0 Ω ... 199.9 Ω 0.1Ω 200 Ω ... 999 Ω 1Ω Insulation resistance (250 V, 500 V, 1000 V), Insulation resistance - S (250 V, 500 V, 1000 V) - Riso/Riso-s 0.00 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 199.9 MΩ 0.1 MΩ - Output voltage 0 V ... 1200 V 1V Insulation resistance (50 V, 100 V), Insulation resistance - S (50 V, 100 V) - Riso/Riso-s 0.00 MΩΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩΩ ... 199.9 MΩ 0.1 MΩ - Output voltage 0 V ... 1200 V 1V (open circuit voltage <50 V a.c.) - Isub / Isub s 0.00 mA ... 19.99 mA 10 µA Differential Leakage current - Idiff 0.00 mA ... 19.99 mA 0.01 mA PE leakage current - Ipe 0.00 mA ... 19.99 mA 0.01 mA Touch leakage current - Itou 0.00 mA ... 19.99 mA 0.01 mA Power -P 0.00 W…19.99 W 0.01 W 20.0 W…199.9 W 0.1 W 200 W ... 1999 W 1W 2.00 kW ... 3.70 kW 10 W -S 0.00 VA…19.99 VA 0.01 VA 20.0 VA…199.9 VA 0.1 VA 200 VA ... 1999 VA 1 VA 2.00 kVA ... 3.70 kVA 10 VA -Q 0.00 VAr…19.99 VAr 0.01 VAr 20.0 VAr…199.9 VAr 0.1 VAr 200 VAr ... 1999 VAr 1 VAr 2.00 kVAr ... 3.70 kVAr 10 VAr - PF 0.00i ... 1.00i 0.01 0.00c ... 1.00c 0.01 - THDU 0.0% ... 99.9% 0.1% - THDI 0 mA…999 mA 1 mA 1.00 A ... 16.00 A 10 mA - Cos fi 0.00i ... 1.00i 0.01 0.00c ... 1.00c 0.01 -U 0.1 V ... 199.9 V 0.1 200 V ... 264 V 1V -I 0 mA…999 mA 1 mA 1.00 A ... 16.00 A 10 mA A Power supply 110 V / 230 V AC, 50 Hz / 60 Hz Overvoltage category CAT II / 300 V, CAT II / 600 V (DISCH1 / DISCH2, only) Protection class I HV output 5 kV a.c. / 6 kV d.c., double insulation COM port 4 x RS232, 1 x USB, 1 x Bluetooth Dimensions 435 x 292 x 155 mm Weight 17 kg

Accuracy ±(3 % of reading) ±(3 % of reading) ±(3 % of reading + 3 digits) Indicative Indicative

±(3 % of reading) ±(3 % of reading) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(5 % of reading + 3 digits) ±(2 % of reading + 2 digits) ±(3 % of reading) ±(5 % of reading) Indicative ±(3 % of reading + 2 digits) ±(10 % of reading) ±(3 % of reading + 2 digits) ±(5 % of reading + 2 digits) ±20 % of reading ±(3 % of reading + 2 digits) ±(5 % of reading + 3 digits) ±(3 % of reading + 5 digits) ±(3 % of reading + 3 digits) ±(3 % of reading + 3 digits) ±(5 % of reading + 5 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 10 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 10 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 D) ±(5 % of reading) ±(5 % of reading + 5 digits) ±(5 % of reading + 5 digits) ±(3 % of reading + 10 digits) ±(3 % of reading) ±(3 % of reading + 5 D) ±(3 % of reading)

Note: Technical specification relates to HW 3 version or higher.

MI 3394 Euro set • Instrument CE MultiTesterXA • HV test pistol with 2 m cable, 2 pcs • Continuity test lead, 2.5 m, 2 pcs • Continuity test lead, red, 1.5 m, 1pcs • Insulation test lead, red, 2.5 m • Insulation test lead, black, 2.5 m • Crocodile clip, black, 2 pcs • Crocodile clip, red, 3 pcs • Discharge time cable • Mains cable

• • • • • •

Bag for accessories Calibration certificate RS232 cable USB cable CD with instruction manual (full version) Metrel ES Manager BASIC Licence *

Picture of MI 3394 EU set

STANDARD SET

* Metrel ES Manager can be downloaded free of charge from Metrel Web server.

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 23

Appliance / Machine / Switchboard Safety

Machine and switchboard testers MI 3394 CE MultiTesterXA CE testing and certifying CE testing and certifying

Due to the differences in testing standards globally, it has becoming increasingly important for manufacturers to ensure that their products are safe for the consumer and industrial markets.

STANDARD

* Note: Personal computer is not a part of the set.

THE NEED FOR TESTING Protecting users from potentially life threatening injuries from electrocution as a result of faulty insulation, or inadequate grounding, is of paramount importance.

Metrel has designed and developed three separate models to address the varied tests and applications required.

3. 24

OPTIONAL

The new CE MultiTesterXA, in conjunction with the CE test adaptor A 1460, provides a thorough and expeditious solution in the execution of auto tests via a single test terminal. This solution is intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during production.

MI 3394 Instrument CE MultiTesterXA A 1460 CE Test adapter S 2073 HV test lead 5m, without pistols A 1560 Burn Link adapter A 1105 Barcode scanner A 1511 Tip Comander HV test pistol with 2 m cable, 2 pcs Continuity test lead, 2.5 m, 2 pcs Continuity test lead, red, 1.5 m, 1pcs Insulation test lead, red, 2.5 m Insulation test lead, black, 2.5 m Crocodile clip, black, 3 pcs Crocodile clip, red, 2 pcs Discharge time cable Mains cable Bag for accessories Calibration certificate RS232 cable USB cable A 1521 USB isolator CD with instruction manual (full version) Metrel ES Manager BASIC Licence A 1496 2-LED signal tower lamp HV

MI 3394 EURO SET •

MI 3394 LINE SET • •

MI 3394 ST SET •

MI 3394 LAB SET •

• • • • • • • • • • • • • • • •

• • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • • • •

• • •

A 1497 4-LED signal tower lamp

•

A 1495 Remote pedal

•

Accessories 3.34

• • • • • • • • • • • • •

The LINE set is defined to be most ideal for automated testing of equipment on production lines. The MI 3394, in combination with the A 1460, provides the user full hands free operation in executing the tests. Metrel ES manager software enables configuration of test procedures (sequences) which are uploaded to the tester and used for automated testing. Test sequences can be started via a remote pedal or tip commander. Predefined test limits are used for the evaluation of PASS/FAIL status, with results being automatically stored on the microSD memory card. Unique ID of tested equipment can be added via barcode scanner during the test procedure.

The STANDARD set is defined based on typical requirements for smaller production. The instrument’s intuitive touch screen display enables easy selection of required tests and test limits for fast test execution. Test limits are used for PASS/ FAILL evaluation, results of the test can be stored under different memory structure levels. The set enables execution of all available single tests. Optionally, the user can also use barcode scanner for entering the equipment’s ID.

The LAB set is defined to cover requirements that are most often required in test laboratories or R&D department’s for type testing. One of the most important test to be carried out is the dielectric withstand test which can be destructive or nondestructive. The MI 3394 supports the execution of both. To execute the destructive withstanding test, the Burn Link Adapter (A 1560) must be used. The set includes also a set of professional HV test pistols for carrying out AC + DC HV tests safely. The rest of the available tests can be carried out via different test terminals. All the tested data can be stored on an 8GB micro SD card.

KEY FEATURES

• Custom defined automatic test sequences via PCSW Metrel ES Manager, • Execution of test sequences via A 1460 CE test adapter, • Hands free operation, • PASS/FAIL and warning lamps, • Programmable inputs and outputs, • Programmable messages, pauses and several different flow commands, • Execution of all tests via single test terminal. • Built-in microSD memory card (8GB supplied with the instrument). • A 1460 has a built-in robust fuse housing, enabling countless change of protective fuses. • A 1460 has a built-in parallel test terminals to the test socket (enabling the user to plug in custom made test terminal). • Test commander has a built in LED torch lamp and PASS/FAIL status LED lamps. • Execution of test commands via test commander test button. • Bar-code scanner enabling identification of barcode labeled appliances.

• • • • •

• • • • • •

Creation of structure with dedicated tests, PASS/FAIL evaluation of test results, Execution of all single tests, Programmable High Voltage (AC + DC) test, 4-wire continuity test.

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

Execution of all single tests, Programmable High Voltage (AC + DC) test, HV burn test, with limited breakdown current, 4-wire continuity test, PASS/FAIL evaluation of test results. Execution of auto-test via test terminals of the instrument. • Built-in microSD memory card (8GB supplied with the instrument).

3. 25

Appliance / Machine / Switchboard Safety

Machine and switchboard testers MI 3325 MultiServicerXD The MI 3325 MultiServicerXD is a top-of-the-line multi-functional instrument covering diverse industrial applications, where robustness and reliability are a must. The new platform integrated in the MI 3325 features in support for colour touch screen technology, advanced memory organizer including large SDcard storage media and state of the art AUTOSEQUENCE®s.

• High resolution colour touch screen, 4.3” TFT. • Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like.

• Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device. • Support for RCD testing: all instruments support testing of A, AC, B, B+ and F RCDs. • Testing of welding equipment (only in combination with A 1422): MI 3325 support testing of welding equipment in accordance with IEC/EN 60974-4. • Functional inspections. • Visual inspections. • Custom inspections (visual and functional). • Built-in help screens for referencing on site. • Built-in fuse tables for automatic evaluation of the line / loop impedance result. • Monitoring of all 3 voltages in real-time. • Hi-pot: high voltage AC (5.1kV @ 250VA). • Continuity: 4 – wire continuity test with selectable test current (0.2 A, 4 A, 10A, 25A) enabling precise measurements. • Communication: 4 – RS232, USB, Ethernet and Bluetooth communication ports enabling downloading, uploading and remote control over instrument. • Multi-system testing: the instrument can be used on TT, TN, IT and 115 V supply systems. • Automated RCD testing procedure (RCD AUTO). • Automated Impedance testing procedure (Z AUTO). • Measurement filtering according to the selected area group. • Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although

3. 26

Accessories 3.34

MEASURING FUNCTIONS • Continuity (2W & 4W), 0.2A, 4A, 10A, 25A + Voltage drop @ 10A; • HV AC, HV AC programmable 100V - 5100V; • Insulation Resistance (Riso, Riso-S) 50V, 100V, 250V, 500V, 1000V (dc); • Sub-Leakage Current, (Isub, Isub-S) 110V a.c., 230V a.c.; • Z loop – Fault loop impedance and prospective fault current (Ipsc, Ulpe, Uc(P)); • Zs rcd – Fault loop impedance and prospective fault current in system with RCD (Ipsc, pe, Uc(P)); • Z line – Line impedance and prospective short-circuit current (Ipsc, Uln); • Functional test (power P/S/Q, voltage, current, cos fi, frequency, ThdU, ThdI, PF); • Touch leakage current;RCD testing (RCD Uc, RCD t, RCD I); • Differential Leakage current; • PE leakage current; • Polarity; • Clamp current; • Voltage, Frequency, Phase rotation; • Varistor test; • Voltage Drop; • Discharging time.

KEY FEATURES

that can be expanded to 32 GB. • PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.

APPLICATION • Factory machinery safety testing, • Industrial safety testing, • Periodic safety testing, • Production line safety testing, • Portable appliances safety testing, • Arc welding equipment safety testing, • Switchgear, control gear, safety testing.

STANDARDS Functionality: • IEC/EN 60204-1 Ed.5 (VDE 0113-1), IEC/ EN 61439-1 (VDE 0660-600-1), IEC/EN 60974-4 (VDE 0544-4), (A 1422 only), IEC/ EN 62368-1 (IEC/EN 60950-1), EN 61557; • IEC/EN 61180, EN 50191 (BGI 891), EN 50699, EN 50678, VDE 0701-0702, AS/ NZS 3760, NEN 3140, IET COP 5th Ed Safety: • EN 61010-1, EN 61010-2-030, EN 61010031, EN 61010-2-032, EN 61557 EMC • EN 61326-1

TECHNICAL DATA FUNCTION Measuring range Resolution Continuity 2W, 4W, test current (0.2A, 4A, 10A, 25A) -R 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 99.9 Ω 0.1 Ω 100.0 Ω ... 199.9 Ω 0.1 Ω 200 Ω ... 999 Ω 1Ω Voltage drop (Iout = 10 A) - ΔU 0.00 Ω ... 19.99 Ω 0.01 Ω 20.0 Ω ... 99.9 Ω 0.1 Ω HVAC, Programmable HV AC, Output voltage, 100 V - 5100 V / 10 V steps (Floating to earth) - Voltage (AC) 0 V ... 1999 V 1V 2.00 kV ... 5.99 kV 10 V - Current, apparent 0.0 mA ... 49.9 mA** / 99.9 mA* 0.1 mA - Current, resistive 0.0 mA ... 49.9 mA** / 99.9 mA* 0.1 mA - Current capacitive -49.9 mA ... 49.9 mA** 0.1 mA -99.9 mA ... 99.9 mA* 0.1 mA - Short circuit current > 200 mA - Output power 250 VA max Insulation resistance (250 V, 500 V), Insulation resistance - S (250 V, 500 V), Riso - PAT / Riso - Welding - Riso/Riso-s 0.08 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 0.1 MΩ 100.0 MΩ ... 199.9 MΩ 0.1 MΩ - Output voltage 0 V ... 600 V 1V Insulation resistance (500 V and 1000 V) ISO installation - Riso 0.15 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 199.9 MΩ 0.1 MΩ 200.0 MΩ ... 999 MΩ 1 MΩ - Output voltage 0 V ... 1200 V 1V Insulation resistance (50 V, 100 V and 250 V) ISO Installation - Riso 0.15 MΩ ... 19.99 MΩ 0.01 MΩ 20.0 MΩ ... 99.9 MΩ 0.1 MΩ 100.0 MΩ ... 199.9 MΩ 0.1 MΩ - Output voltage 0 V ... 300 V 1V Measuring range according to EN 61557 0.15 MOhm ... 999 MOhm Substitute leakage (Isub, Isub-S), open circuit voltage, 110 V a.c., 230 V a.c. - Isub 0.02 mA ... 1.99 mA 0.01 mA - Isub s 2.00 mA ... 19.99 mA 0.01 mA Differential Leakage current - Idiff 0.010 mA ... 1.999 mA 0.001 mA 2.00 mA … 19.99 mA 0.01 mA PE leakage current - Ipe 0.010 mA ... 1.999 mA 0.001 mA 2.00 mA … 19.99 mA 0.01 mA Touch leakage current - Itou 0.010 mA ... 1.999 mA 0.001 mA 2.00 mA … 19.99 mA 0.01 mA Operating range (acc. to EN 61557-16) 0.010 mA ..... 19.99 mA Power - P (active) 0.00 W … 19.99 W 0.01 W 20.0 W … 199.9 W 0.1 W 200 W ... 1999 W 1W 2.00 kW ... 3.70 kW 10 W - S (apparent) 0.00 VA … 19.99 VA 0.01 VA 20.0 VA … 199.9 VA 0.1 VA 200 VA ... 1999 VA 1 VA 2.00 kVA ... 3.70 kVA 10 VA - Q (reactive) 0.00 VAr … 19.99 VAr 0.01 VAr 20.0 VAr … 199.9 VAr 0.1 VAr 200 VAr ... 1999 VAr 1 VAr 2.00 kVAr ... 3.70 kVAr 10 VAr - PF 0.00 i ... 1.00 i 0.01 0.00 c ... 1.00 c 0.01 - THDU 0.0 % ... 99.9 % 0.1% - THDI 0 mA … 999 mA 1 mA 1.00 A ... 16.00 A 0.01 A - Cos Phi 0.00i ... 1.00i 0.01 0.00c ... 1.00c 0.01 -U 0.1 V ... 199.9 V 0.1 200 V ... 264 V 1V -I 0 mA … 999 mA 1 mA 1.00 A ... 16.00 A 0.01 A

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

Accuracy ±(2 % of reading + 2 D) ±(3 % of reading) ±(5 % of reading) Indicative ±(2 % of reading + 5 D) ±(3 % of reading) ±(3 % of reading) ±(3 % of reading) ±(3 % of reading + 3 D) Indicative Indicative Indicative

±(3 % of reading + 2 D) ±(5 % of reading) ±(10 % of reading) ±(3 % of reading + 2 D) ±(5 % of reading + 3 D) ±(5 % of reading) ±(10 % of reading) ±(3 % of reading + 3 D) ±(5 % of reading + 2 D) ±(10 % of reading) ±(20 % of reading) ±(3 % of reading + 3 D)

±(3 % of reading + 3 D) ±(5 % of reading) ±(3 % of reading + 10 D) ±(5 % of reading) ±(3 % of reading + 3 D) ±(5 % of reading) ±(3 % of reading + 3 D) ±(5 % of reading)

±(5 % of reading + 5 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 10 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 10 D) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading) ±(5 % of reading + 5 D) ±(5 % of reading + 5 D) ±(5 % of reading + 5 D) ±(5 % of reading + 5 D) ±(5 % of reading) ±(5 % of reading + 5 D) ±(3 % of reading + 10 D) ±(3 % of reading) ±(3 % of reading + 5 D) ±(3 % of reading)

3. 27

RCD testing / current shape AC, A, F, B, B+ / RCD type (non-delayed, S time-delayed, PRCD, PRCD-K, PRCD-S) - I• – Trip-out current

0.2 xI•N ... 1.1 xI•N (AC type); 0.2 xI•N ... 1.5 xI•N (A type, I•N≥30 mA); 0.2 xI•N ... 2.2 xI•N (A type, I•N<30 mA); 0.2 xI•N ... 2.2 xI•N (B type)

0.05 xI•N

±0.1 xI•N

- Uc – Contact voltage

0.0 V ... 19.9 V 20.0 V ... 99.9 V

0.1 V

(-0 % / +15 %) of reading ± 10 D (-0 % / +15 %) of reading

- Uc I•

0.0 V ... 19.9 V 20.0 V ... 99.9 V

0.1 V

(-0 % / +15 %) of reading ± 10 D (-0 % / +15 %) of reading

- t •N –Trip-out time

0.0 ms ... 40.0 ms 0.0 ms ... max. time* * For max. time refere to user manual.

0.1 ms

±1 ms ±3 ms

0 ms ... 300 ms

1 ms

±3 ms

0.01 mA 0.1 mA 1 mA 0.01 A 0.1 A

±(5 % of reading + 10 D) ±(5 % of reading + 5 D)

UC I•N - Contact coltage

Trip out time - t I•

Polarity, Test voltage (normal) < 50 V / Test voltage (active) mains voltage Power consumption of tested device during the active test…….< 25 VA Clamp current (True RMS current using 1000:1 current clamp) -I - Idiff - Ipe

0.00 mA ... 9.99 mA 10.0 mA ... 99.9 mA 100 mA ... 999 mA 1.00 A ... 9.99 A 10.0 A ... 24.9 A

Accuracy of current transformer is not considered. Frequency range of current clamp is not considered. Voltage (Online terminal voltage monitor (10 … 550 V) + Phase rotation) - TRMS (14 … 500 Hz) Uln, Ulpe, Unpe, U1pe, U2pe, U12, U13, U23

0 V … 550 V

±(2 % of reading + 2 D)

- Frequency

0.00 Hz ... 9.99 Hz 10.0 Hz ... 499.9 Hz

0.01 Hz 0.1 Hz

±(0.2 % of reading + 1 D)

- DC voltage

0 V … 1000 V

±(3 % of reading + 3 D)

- AC voltage

0 V … 625 V

Consider accuracy of DC voltage

0.01 Ω 0.1 Ω 1Ω

±(3 % of reading + 3 D) ±(5 % of reading) ±(5 % of reading)

0.1 Ω 1Ω

±(5 % of reading + 5 D) ±(5 % of reading + 5 D)

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 D) ±(10 % of reading) ±(10 % of reading) ±(10 % of reading)

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 12 D) ±(5 % of reading + 12 D) ±(10 % of reading) ±(10 % of reading)

Varistor test

R low - Resistance of earth connection and equipotential bonding -R

0.16 Ω ... 19.99 Ω 20.0 Ω ... 199.9 Ω 200 Ω ... 1999 Ω

Measuring range according to EN 61557 0.16 Ω ... 1999 Ω - R+,R-

0.0 Ω ... 199.9 Ω 200 Ω ... 1999 Ω

Open circuit voltage Measuring current Test lead compensation

6.5 Vdc ... 18 Vdc min. 200 mA into load resistance of 2 Ω up to 5 Ω

Impedance Z loop, (L-PE, Test current @ 230V … 20A (10ms)) - Z – Fault loop impedance

0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ ... 9.99 kΩ

Measuring range according to EN 61557 0.12 Ω ... 9.99 kΩ Impedance Zs rcd, L-PE - Z - Zs Rcd

0.00 Ω ... 9.99 Ω 10.0 Ω ... 99.9 Ω 100 Ω ... 999 Ω 1.00 kΩ .... 9.99 kΩ

Measuring range according to EN 61557 is 0.46 Ohm ... 9.99 kOhm for Itest = normal and 0.48 Ohm ... 9.99 kOhm for Itest = low. - Ipsc – Prospective fault current

0.00 A ... 9.99 A 10.0 A … 99.9 A 100 A … 999 A 1.00 kA … 9.99 kA 10.0 kA … 23.0 kA

0.01 A 0.1 A 1A 10 A 100 A

Consider accuracy of fault loop resistance measurement

- Ulpe – Voltage

0 V … 550 V 20.0 V ... 99.9 V* * for Z - Zs Rcd function

1V 0.1 V

±(2 % of reading + 2 D)

0.01 Ω 0.1 Ω 1Ω 10 Ω

±(5 % of reading + 5 D) ±(5 % of reading + 5 D) ± 10 % of reading ± 10 % of reading

Impedance Z line (L-L, L-N, Test current @ 230V … 20A (10ms)) - Z Line impedance

3. 28

0.12 Ω ... 9.99 Ω 10.0 Ω … 99.9 Ω 100 Ω … 999 Ω 1.00 kΩ … 9.99 kΩ

Accessories 3.34

- Ipsc – Prospective fault current

0.00 A … 0.99 A 1.0 A … 99.9 A 100 A … 999 A 1.00 kA … 99.99 kA 100 kA … 199 kA

0.01 A 0.1 A 1A 10 A 1000 A

Consider accuracy of line resistance measurement

- Uln – Voltage

0 V … 550 V

±(2 % of reading + 2 D)

0.0 % … 99.9 %

0.1 %

Consider accuracy of line resistance measurement (s)

- t – Discharging time

0.0 s ... 10.0 s

0.1 s

±(5 % of reading + 2 D)

- Up – Peak voltage Threshold voltage: 34 V, 60 V, 120 V

0 V ... 550 V

±(5 % of reading + 3 D)

Voltage Drop (Zref 0.00 Ω … 19.99 Ω, Test current @ 230V … 20A (10ms)) -dU – Voltage drop Discharging time

General data Power supply

110 V / 230 V AC, 50 Hz / 60 Hz

Max. power consumption

300 VA (without load on mains test socket)

Max. load

10 A continuous, 16 A short duration, 1.5 kW motor

Measuring categories Mains test socket, IEC test socket

CAT II / 300V

TC1 test socket, (C1,C2,P1,P2,P)

CAT III / 300 V

Protection classification Degree of protection

IP 54 (Closed case), IP 40 (Open case), IP 20 (Mains socket)

Communication Memory

Depends on microSD card size

RS232 interfaces

Two DB9 ports (RS 232-1(PC), RS 232-2)

INPUTs/OUTPUTs

24 Vmax (DB9 connector, 2X)

USB 2.0

Standard USB Type B

Bluetooth

Class 2

Ethernet

Dynamic IP (DHCP)

Display

Colour TFT display, 4.3 inch, 480 x 272 pixels

Dimensions

420 x 325 x 180 mm / 420 x 325 x 250 mm (with accessories)

Weight

13.3 kg / 15.1 kg (with accessories)

MI 3325 • Instrument MultiServicerXD • HV test lead with test probe • HV test lead with crocodile • Mains cable • IEC test cable • Residual voltage test cable • Plug test cable • 3-wire test lead, 3 m • Continuity test lead, 2.5 m, 2 pcs • Test lead, red, 1.5 m • Test probe, 4 pcs (black, red, green, blue)

• • • • • • • • • •

Crocodile clip, green Crocodile clip, blue Crocodile clip, black, 3 pcs Crocodile clip, red, 3 pcs Calibration certificate RS232 cable USB cable CD with instruction manual (full version) PC SW Metrel ES Manager BASIC * Protective bag for accessories **

Picture of MI 3325 set

STANDARD SET

* Metrel ES Manager can be downloaded free of charge from Metrel Web server. ** Mounted on the case

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 29

Good to know End-of-line safety testing in production End-of-line safety testing in production Ensure the electrical safety of your manufactured equipment and safety of your staff with Metrel end-of-line safety testing systems. Safety testing of electrical devices in production process requires special care for the operator, since the test procedures include application of dangerous test voltages, which translates to a heightened probability of electric shock. Almost all electrical equipment needs to be inspected and tested after production, as part of end-of-line testing. Metrel has developed MI 3394 CE MultiTesterXS product solution, safety modules and accessories to fully cover the European standard EN 50191 for erection and operation of test equipment. Safety systems Metrel offer 4 standard safety systems for erection of test installation, enabling the provision of the electrical safety testing according to EN 50191. Test stations with automatic protection against direct contact

S 2109 safety system with RFID sensor

S 2110 safety system with light barrier sensor

When we talk about electrical safety testing the first things that come to mind are usually electrical installation safety testing and machine and portable appliance safety testing (PAT). Simultaneously forgetting where electrical safety really starts – on the production floor. More specifically, at the end of the production line, before the various electrical and electronic devices and components are packed and shipped to customers. This type of testing is, not arbitrarily, called end-of-line (EOL) testing. There is some overlap between “regular” electrical safety testing (of appliances and machines) using portable testing equipment and that done at the end of the production line using integrated solutions, however differences are far more pronounced. Industry 4.0 is upon us and few if any standalone testing equipment supports easy integration in new or existing production/ testing line and seamless communication with other elements of the line, primarily the central control unit, using standard protocols. Not wanting to be left out and recognizing limitations of our existing products for integration (in production/testing lines), we have decided to expand our product portfolio with a dedicated tester, testing modules and accessories for EOL testing. Together they constitute a comprehensive testing suite for electrical safety testing of equipment in accordance with the EN 50191 standard and can be combined in any manner to best suit the customer’s needs. Part of the suite is also a versatile software package that includes a SDK for easy integration with third-party software and subsequent smooth data flow from and between all elements of the suite, starting with the central testing unit that “runs the show”.

3. 30

Accessories 3.34

One central unit Having unified control of various testing stages can be challenging and there are several design approaches on how to do this, some more customizable and therefore flexible than others. We have chosen the one-central-unit-manyaccessories approach. In other words, one main testing unit that controls the various testing modules and connected accessories and acts as communication relay between them and a central control unit for the entire line. The MI 3394 CE MultiTesterXA platform was chosen as the most appropriate and served as the basis for a dedicated EOL testing unit MI 3394 CE MultiTesterXS. In comparison with the base model, the MI 3394 CE MultiTesterXS has an additional communication port for connecting with selected module(s) and a revamped safety mechanism for current limitation in selected HV tests and many more new features. Features that enable reliable control of the various sub-units that comprise the testing system (as set up by the customer) and offer user-defined automatization of selected testing procedures, all the while maintaining the highest safety level as prescribed by the standard (EN 50191). However, the question of acceptable safety is ultimately in the realm of the users and predicated on their choice of the testing module, how it is integrated in the production/testing line and used accessories. Easy customization Testing modules or safety modules as we like to call them, are devices that act as both as connection hubs for the various testing accessories and safety equipment (emergency switches, light curtains etc.) and protective gateways between the user and the testing line. This latter function is provided by independently monitoring safety mechanism preventing direct contact with live voltage, and limiting output current in selected HV tests. Any fault (direct contact or testing current surge) triggers virtually immediate disconnection from the rest of the testing/ production line, thus providing the highest protection grade (PLe or SIL3). There are four distinct safety modules, differing in supported safety equipment, but offering identical flexibility in regard to testing accessories (i.e. which accessories can be connected to them). Safety equipment includes RFID sensors (open/ closed testing cage’s door), light curtains,

Test station without automatic protection against direct contact

two hand control protective device and a current limiting device – all in combination with emergency START/STOP switches. Modules as well as safety equipment can be easily installed in existing or new testing lines and come with bolt holes for that purpose, or in our prefabricated testing cages and cabinets. We offer two single chamber test cages and as well as one large rack cabinet with mounting adapters for the MI 3394 CE MultiTesterXS and one additional accessory. All are one size fits all – customized testing cage by a third party integrator may be needed if the customer has more specific requirements. Same goes for the software component of the suite. Seamless integration No modern EOL testing solution is complete without a versatile software and ours is no exception. We envisioned Metrel ES Manager (MESM) to fill this role since it offers a myriad of features that enable automatization of entire testing procedures, making them safer for the user and more time-efficient. Nevertheless, the customer likely already has dedicated software for the entire line and would like to integrate our EOL – as easy as possible. This is where the SDK (part of the software package) comes into play. The SDK enables customers to use their existing production line/testing software for communication with the various components of our testing suite without the need for proprietary software (MESM).

S 2111 safety system with Two hand control

Test station where requirements from EN 50191 can be omitted.

The customers therefore have virtually free hands when it comes to using our testing suite for their needs. They can buy the entire suite and use it as it is or purchase individual components and utilize them as they see fit. For more information visit the Metrel website or ask for a quotation at your local distributor.

S 2115 safety system with current limitation Itest < 3mA

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 31

NEW

End-of-line safety testing in production MI 3394 CE MultiTesterXS

Appliance / Machine / Switchboard Safety

The MI 3394 CE MultiTesterXS is a multi-functional test instrument that includes all features of CE MultiTester XA instrument. The instrument is intended for electrical equipment safety testing. It can be used in all kinds of applications such as type testing, in-line testing, maintenance testing, testing after repair, periodic (recurrent) testing. The XS (Extended Safety) version of the instrument is specially designed to supports connection of different safety modules for independent control of dangerous measuring circuits and/or limitation of output current. Supported safety modules make the instrument safer to use (up to Ple or SIL 3) and consequently ready for integration into production lines.

MEASURING FUNCTIONS

KEY FEATURES

STANDARDS

• • • • • • • • • •

• Control of measuring circuits with help of Safety sets; • Support for CE Switch 5 kV; • Limitation of current in HV test to safe level in combination with Safety sets; • Perfectly suited for use in working places according to EN 50191.

Functionality • EN 50191 (BGI 891); • IEC/EN 60335; • IEC/EN 60204-1 Ed.5 (VDE 0113-1); • IEC/EN 61439-1 (VDE 0660-600-1); • IEC/EN 62368-1 (IEC/EN 60950-1); • IEC/EN 60598; • IEC/EN 61010; • IEC/EN 61180; • EN 50699; • EN 50678; • VDE 0701-0702; • AS/NZS 3760; • NEN 3140; • IET COP 5th Ed

APPLICATION • Testing of electrical equipment; • CE marking and routine testing after production.

Electromagnetic compatibility • EN 61326-1 Safety • EN 61010-1; • EN 61010-2-030; • EN 61010-031; • EN 61557

3. 32

Accessories 3.34

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 33

Selection Guide for GT Accessories

•

A 1422

Active 3-phas Adapter Plus

A 1422 Multifunctional test adapter is designed for troubleshooting, as well as for periodic testing on 3-phase appliances, machinery, and ARC welding equipment.

•

A 1584

Rack mount adapter for MI 3394 CE MultiTesterXA

A 1585

Rack mount adapter for MI 3325 MultiServicerXD

A 1585 is a rack mount adapter for 19” rack, which is designed to hold the MI 3325 MultiServicerXD. This product kit includes the parts needed for complete and easy installation of the adaptor kit in RITAL square hole racks, and some third-party racks.

A 1586

Rack mount adapter for A 1460 CE Adapter

•1

A 1460 XA

CE Adapter

Provides a thorough and expeditious solution in the execution of auto tests via a single test terminal, A 1511 2M5 included in set.

•

A 1460 XD

CE Adapter

A 1560

Burn Link adapter

For performing insulation breakdown test with limited breakdown current "30˝mA".

A 1207

Three phase adapter

The 3-phase adapter for substitute leakage current, insulation resistance and continuity measurements on electric loads equipped with 16A and 32A CEE 3P sockets.

•

A 1556

Medical adapter

Medical multi-probe adapter for testing all applied parts with a single measurement. Adapter is designed to be used in combination with MI 3360 M model.

•

A 1610

Continuity test adapter

Continuity test adapter enabling point-to-point testing of earth continuity with 10 & 25 A test current.

•2

A 1474

115 V test adapter

115 V test adapter for testing 115 V appliances, (available for UK/NZ/ AUS models only).

•

A 1316

3-phase adapter (16 A CEE-Schuko)

3-phase adapter for testing 3-phase appliances.

•

•1

•

• Option •1 A 1460 CE Adapter only •2 MI 3360 25A, MI 3360 M, MI 3360 F only 3. 34

MI 3325

A 1322 Multifunctional test adapter is designed for troubleshooting, as well as for periodic testing on 3-phase appliances and machinery.

MI 3394

Active 3-phas Adapter

A 1322

A 1422

Target application

MI 3311

Description

MI 3309 BT

Part number

MI 3360

Photo

Accessories 3.34

•

A 1110

Three phase adapter

3-phase test adapter for installation safety testing on 3-phase sockets type 16 A 3CEE.

•

A 1111 A 1215

Three phase adapter with switch

3-phase adapter with selection switch for installation safety testing on 3-phase sockets type 16 A 3CEE. The adapter allows seamless switching between measurements.

•

A 1373

3-phase mains cable / adapter 32 A male / 32 A female, 5 pin, 2 m

3-phase test adapter, for testing of 3 phase extension leads in combination with A 1322 / Active 3-phase Adapter. 3-phase power supply cable for A 1322 / Active 3-phase adapter.

•

A 1375

1-phase mains cable / adapter 32 A / 16 A Schuko, 3 pin, 2 m

1-phase Power supply cable for A 1322 / Active 3-phase adapter.

•

A 1376

3-phase adapter 16 A male / 16 A female, 5 pin, 2 m

3-phase test adapter, for testing of 3 phase extension leads in combination with A 1322 / Active 3-phase Adapter.

•

A 1394

1-phase adapter 16 A male / 16 A female, 3 pin, 2 m

1-phase test adapter for, testing of 1 phase extension leads in combination with A 1322 / Active 3-phase Adapter.

•

A 1418

1-phase adapter 16 A, 3 pin female / 16 A Schuko male, 2 m

1-phase test adapter for, testing of 1 phase extension leads in combination with A 1322 / Active 3-phase Adapter.

•

A 1419

1-phase adapter 16 A, 3 pin male / 16 A Schuko female, 2 m

1-phase test adapter for, testing of 1 phase extension leads in combination with A 1322 / Active 3-phase Adapter.

•

A 1423

Adapter for welding equipment, fi 14/CX20

Test adapter for measuring leakage current, insulation, earth bond and no load voltage on ARC welding equipment.

A 1424

Adapter for welding equipment, fi 21/CX22

•

A 1425

Adapter for welding equipment, fi 21/CX25

•

A 1472

Leakage current clamp

Current clamp with high resolution for accurate leakage current measurements.

A 1579

Leakage current clamp

Current clamp with high resolution for accurate leakage current measurements.

•

MI 3325

3-phase adapter for testing 3-phase appliances.

MI 3394

3-phase adapter (32 A CEE-Schuko)

A 1422

A 1317

A 1322

Target application

MI 3311

Description

MI 3360

Part number

MI 3309 BT

Photo

•

• •

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 35

•

Measuring adapter for leakage current measurements: for measuring differential leakage current, protective conductor current, neutral current and load current, through leakage current clamp. All wires are separated.

•

A 1389

Adapter CEE 5-P 16A / CEE 5-P 16A

•

A 1390

Adapter CEE 5-P 32A / CEE 5-P 32A

•

A 1495

Remote control pedal

Remote control pedal is used for safe remote start of high voltage insulation test and additionally allows free hand operation of the worker.

•

A 1495 PL

Adapter for pedal and signal lamps

The adapteris designed to enable use of remote pedal and LED signal lights connected to the instrument.

•

A 1511 2M5

Tip Commander 2,5 m

•

A 1511 5M

Tip Commander 5 m

•

A 1511 10M

Tip Commander 10 m

Tip commander serves as a remote control for execution of passive tests, when used in combination with A 1460. Or for execution of 4-wire continuity test when used directly from MI 3325. The commander has a built in LED torch lamp including PASS/FAIL status LED's and start key for execution of the tests. When used directly from MI 3325 the connection cable A 1583 must be used.

•

A 1694

Tip Commander 2,5 m

Tip Commander A 1694 enables remote controlled execution of tests on large test objects, where test probe is distanced from the test instrument. Consecutive measurements within test loop can be started or stopped with TEST button. Tip Commander A 1694 should only be used with MI 3360 series of METREL test instruments. Full functionality of A 1694 is supported in AUTOSEQUENCE® and Single tests.

A 1583

Connection cable

Connection cable for use of A 1511 tip commander directly from MI 3325.

•

A 1497

Warning lamp / 4 LED’s signal tower with buzzer

Colour - LED signal tower with build-in buzzer visually and acoustically signalizes ongoing tests and test conditions for use with A 1460. If A 1497 is used in combination with MI 3325 or MI 3394, an external power supply adaptor A 1499 shall be used.

•

A 1496

Warning lamp / 2-LED signal tower HV

Warning lamps visually signalize ongoing HV insulation test and warn the user about dangerous voltage conditions for use with A 1460. If A 1496 is used in combination with MI 3325 or MI 3394, an external power supply adaptor A 1499 shall be used.

•

A 1496 MAG

Warning lamp / 2-LED signal tower HV ready for magnetic mounting

Warning lamps visually signalize ongoing HV insulation test and warn the user about dangerous voltage conditions.

•

Option

3. 36

Accessories 3.34

MI 3325

Adapter Schuko / Schuko

MI 3394

MI 3309 BT

A 1388

A 1322

Target application

A 1422

Description

MI 3311

Part number

MI 3360

Photo

•

MI 3394

MI 3325

External power supply 24V

If the LED tower lamp is used in combination with MI 3325 or MI 3394, the external power supply should be used.

•

A 1079

Discharge time cable

Adaptor for measuring discharge time on internal electronic components.

•

A 1060

Power splitter for discharge time measurement

T-type power splitter for measurements of discharge time on machinery and switchgear.

•

S 1058

Continuity test lead, 2 x 10 m, 2 pcs

Extension test leads for continuity measurements.

•

S 2073

HV test lead 5m, without pistols

High voltage extension test leads for measurements on larger electrical equipment.

•

A 1494 2M

HV test pistol with 2 m cable, blue

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

•

A 1494 15M HV test pistol with 15 m cable, blue A 1486 2M

HV test pistol with 2 m cable, red

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

A 1486 15M HV test pistol with 15 m cable, red S 2078 2M

HV test lead 2m, with pistols, 2pcs

High voltage safety test probe for manual high voltage testing. The test tip is protected by an arc-resistant teflon tube, and it has built in almost wear-free lungsten which assures a long lifetime.

S 2078 15M HV test lead 15m, with pistols, 2pcs

•

A 1422

A 1499

A 1322

Target application

MI 3311

Description

MI 3360

Part number

MI 3309 BT

Photo

A 1740

Calibration box 5kV

Calibration Box for checking insulation measurements in the field (max. test voltage = 5kV)

•

A 1593

Large Kelvin test clip

Large robust Kelvin crocodile clip for accurate resistance measurements on larger objects.

•

A 1595

Large test crocodile, black

Large robust crocodile clip for resistance measurements on larger objects.

•

A 1596

Large test crocodile, red

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 37

A 1639 BLU-5M

•

A 1598

Residual Voltage Adapter

3-phase adapter for measurements of discharge time on machinery and switchgear, equipped with 16A CEE 3P socket.

•

A 1599

Residual voltage cable

Adapter for measurements of discharge time on machinery and switchgear.

•

A 1677

Test lead, 3 x 3 m

3-wire test lead for measuring of single or three phase systems.

•

S 1072

Continuity test lead with crocodile clip, 2 x 2.5 m, 2 pcs

Extension test leads with protection shield and with crocodile clips for continuity testing with high test currents (10 A, 25 A).

•

S 2012

Continuity test lead, 10 m, 2 pcs (red, black)

2 pieces of extension test lead for continuity measurements.

•

S 2025

Test lead, 1.5 m, 2 pcs (black, red)

Connection leads for different measurements.

•

A 1153

Test lead, black, 20 m

Extension test lead for earth and continuity measurements.

•

A 1154

Test lead, black, 4 m

Extension test lead for earth and continuity measurements.

•

A 1331

Test lead with crocodile clip, black, 1,5 m

Test lead with crocodile clip for PAT testing.

•

A 1334

IEC cable, 2 m

Additional IEC cable for performing PRCD test.

Option

3. 38

MI 3325

HV test clip with cable for best contacting of different contact surfaces with 35 mm jaw opening.

MI 3394

Large HV Crocodile with cable

A 1322

A 1639 RED-2M5 A 1639 RED-5M A 1639 RED-10M A 1639 RED-15M A 1639 BLU-2M5

A 1422

Target application

MI 3311

Description

MI 3309 BT

Part number

MI 3360

Photo

Accessories 3.34

•

Test lead for PAT safety testing.

•

A 1342

Test lead, brown 1.5 m

Test lead for PAT safety testing.

•

A 1309

Crocodile clip, green

•

Crocodile clip, blue

Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.

•

A 1310 A 1297

Crocodile clip, brown

•

A 1013

Crocodile clip, black

A 1064

Crocodile clip, red

A 1062

Test probe, green

A 1015

Test probe, blue

A 1298

Test probe, brown

A 1014

Test probe, black

A 1016

Test probe, red

A 1268

Test probe, brush type, 4 mm

Test probe, brush type, assures good galvanic contact when measuring on revolving parts, flat surfaces, screw connections and similar. Equipped with standard 4 mm connector.

•

A 1488

BT Able printer, (battery or mains operated)

Printer supports printing of bar-codes which contain a complete appliance information and PASS or FAIL status of result, or QR codes which contain information of the previous results, the test status, and the previously used test sequence.

•

A 1489

Label printer Able, with power and data cables, (battery or mains operated)

•

S 2062

BT label printer set, (mains operated)

•

• •

•

• •

Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is present.

•

• •

•

• •

•

Printer supports printing of simple labels including PASS or FAIL status of result, Appliance name, ID number, User information and test date.

•

MI 3325

Test lead, green 1.5 m

MI 3394

MI 3360

A 1341

A 1422

Target application

A 1322

Description

MI 3311

Part number

MI 3309 BT

Photo

•

• •

A 1628

Spare label roll for S 2062

Spare label roll for s 2062, 45x90 mm, (800 labels per roll).

A 1379

Paper for A 1276, printer

Spare thermal receipt paper for printer A 1276.

A 1450

Spare label roll for S 2062

Spare label roll for s 2062, (2500 labels per roll)

•

A 1520

Labels for ABLE printer, (250 labels per roll)

Spare label roll for printer A 1488 and 1489, (250 labels per roll)

•

A 1105

Barcode scanner

Barcode scanner for identification of barcode labelled appliances.

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 39

•

MI 3394

MI 3325

Barcode scanner 2D RS232 connection

2D Barcode scanner for identification of barcode labelled appliances

•

A 1652

Barcode scanner (Bluetooth)

Barcode scanner for identification of barcode labelled appliances.

•

A 1653

QR / Barcode scanner (Bluetooth)

QR / Barcode scanner for identification of barcode labelled appliances.

•

A 1106

Barcode labels, 1000 pcs

Appliances can be marked with barcode labels for easier identification.

•

A 1107

RFID reader / writer

RFID reader / writer allows to read and upload test results and information about tested electrical equipment to the RFID tags.

A 1571

NFC reader / writer

NFC reader / writer allows to read and upload test results and information about tested electrical equipment to the NFC tags (NTAG 216).

•

A 1572

NFC tags, fi 34mm self-stick 50 pcs

NFC tags have sufficient memory space to store test results, test code and tested appliance information

•

A 1573

NFC labels, fi 29 mm self-stick 50 pcs

NFC labels have sufficient memory space to store test results, test code and tested appliance information

•

A 1574

NFC cable-tie, L 130 mm 50 pcs

NFC cable-ties have sufficient memory space to store test results, test code and tested appliance information

•

A 1108

RFID tags, self-stick, 25 pcs RFID tags, key tag, 25 pcs

RFID tags sufficient memory space to store test results and tested appliance information.

•

A 1337

RFID tags, self-stich 50 pcs

RFID tags have sufficient memory space to store test results and tested appliance information.

•

A 1160

Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA

Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.

•

Option

3. 40

Accessories 3.34

•

A 1322

A 1105 2D

A 1422

Target application

MI 3311

Description

MI 3309 BT

Part number

MI 3360

Photo

•

A 1017

Communication cable RS232

RS232 interface cable for connecting the instrument with the PC.

A 1171

RS232 / USB adapter with 1 m cable

RS232 / USB adapter for instruments without USB comunication port.

A 1578

RS232 to USB adapter for external USB keyboard

The A 1578 adapter enables the connection of external USB keyboard, for easy data entering.

A 1436

Bluetooth dongle

External Bluetooth adapter for wireless connection between Metrel’s instruments and Smart phones, tablets and PCs.

A 1305

PC SW PATLink PRO with USB and RS232PS/2 cable

PC Software PATLink PRO enables downloading, data management and printing of test reports. Comes delivered with RS232-PS/2 and USB communication cables.

A 1306

PC SW PATLink PRO Plus with USB and RS232-PS/2 cable

PATLink PRO Plus is an advanced PC SW which enables downloading, test results analysis, data upload to the instrument and professional test report creation. Delivered with RS232 and USB COM cables.

A 1203

Upgrade code PATLink PRO to PATLink PRO Plus

Password for upgrading standard PC software PATLink PRO to advanced PC SW PATLink PRO Plus with professional report creation facility.

•

A 1433

PATLink Android

Enables fast and simple data management of tested appliances, as well as a quick overview of already performed tests by simply scanning a QR code.

•

A 1434

aPATLink Android

P 1100

Metrel FW Profile Licence Key With BASIC SW Set

Licence key for an additional FW profile and BASIC MESM functionality.

•

P 1101

Metrel MESM BASIC to PRO licence key Upgrade

Licence key for upgrading the Metrel ES Manager to advanced version with professional report creation and Excel PRO export functionality.

•

P 1102

Metrel FW Profile Licence Key With PRO SW Set

Licence key for an additional FW profile and PRO MESM functionality.

•

MI 3325

Fast battery charger for up to 12 pcs AA, 6 pcs C or D rechargeable batteries, 4 pcs 9 V block batteries.

MI 3394

Fast charger for AA, C, D and 9 V block batteries

A 1422

A 1169

A 1322

Target application

MI 3311

Description

MI 3360

Part number

MI 3309 BT

Photo

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 3.34

3. 41

3. 42

SDK Licence key for instrument integration with 3rd party SW.

•

P 1301

MI 3360 M licence key

Licence key for unlocking medical device testing functionality (in accordance with EN 62353) on MI 3360 25A OmegaGT XA.

•

P 1102-AND Metrel aMESM PRO Licence Key Upgrade (A 1522)

•

A 1521

USB isolator

It is intended as galvanic insulation of USB interface between our products and PC to prevent damage of USB connected equipment in case of accidentally applied voltage difference between two types of equipment.

A 1458

SanDisk MicroSD card reader

Move data between your computer and memory card with memory card reader.

A 1737

Carrying case

•

S 2138

S 2138 Set of wheels for carrying cases A 1736, A 1737, A 1738

Wheels and trolley that can be added to carrying cases for easier transport.

•

A 1271

Carrying bag (S)

Small soft carrying bag for transport and storage of test instrument or accessories.

•

A 1289

Carrying bag (M)

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

•

A 1550

Carrying bag (XXL)

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

•

A 1302

Set of carrying straps

Set of carrying straps for carrying the measuring instrument around the neck allowing free hand use of the tester.

•

A 1303

Soft hand strap

Soft hand strap for holding the instrument.

•

Accessories 3.34

•

MI 3325

Metrel SDK Licence Key

MI 3394

MI 3309 BT

P 1104

A 1322

Target application

A 1422

Description

MI 3311

Part number

MI 3360

Photo

•

Content Power Quality Analysis 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

GOOD TO KNOW Power Quality Analysis

4.02

POWER QUALITY ANALYSERS Selection Guide for Power Quality Analysers Differences for Power Quality Analysers Comparison for Power Quality Analysers Selection Guide for Clamps MI 2893 Power Master XT MI 2892 Power Master MI 2885 Master Q4 MI 2884 Energy Master XA MI 2883 Energy Master

4.04 4.05 4.05 4.06 4.08 4.10 4.12 4.14 4.16

OTHER INSTRUMENTS / ADAPTERS / ACCESSORIES A 1685 / A 1565 / A 1577 Professional protective waterproof case CS 2890 Power Calibrator / Simulator

4.18 4.20

SELECTION GUIDE FOR PQA ACCESSORIES

4.22

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

Power Quality Analysis

Electrical Installation Safety High Voltage Insulation / Continuity / Earth / Transformer Appliance / Machine / Switchboard Safety POWER QUALITY ANALYSIS Equipment for laboratories and Schools Multimeters / Clamp meters / Voltage testers / Thermal cameras Software

4. 1

Good to know Power Quality Testing Find out more about modern power quality measurement techniques There are quite a few reasons for measuring and analysing power quality nowadays. Potential interactions between end use equipment and electric distribution system, external electromagnetic interferences, resonant states between electrical circuits and some other factors call for a need to be analysed in order that harmful consequences can be omitted or prevented. Power quality analysing includes measurements of: • Phase to ground voltages; • Phase to neutral voltages; • Neutral to ground voltages; • Phase to phase voltages in three-phase systems; • Phase currents; • Current in a neutral conductor; • Frequency; • Power Factor, cos fi; • Harmonic components of current and voltage and their direction; • Waveform of current and voltage at specific circumstances (peak magnitude, primary frequency, time of occurrence, rising rate); • Transients. Active Power (P) Active power is the power which is actually consumed or generated in an AC circuit over a resistive load . It is measured in watts (W) or kilowatts (kW). Reactive Power (Q) Reactive power is the power that is provided by generators, synchronous condensers, or electrostatic equipment such as capacitors and directly influences electric system voltage. The portion of electricity that establishes and sustains the electric and magnetic fields of alternatingcurrent equipment. This is measured in Volt-Ampere (var). Apparent Power (S) Apparent power is the perceived power from a load that has both active and reactive components. Apparent power is the vector sum of both active and reactive power and is usually measured in VoltAmperes (VA). Power Factor Power factor is a measure of a power system’s efficiency and is the ratio of real power to apparent power.

power over a period of time. This is usually expressed in kilowatt-hours (kWh). Fundamental frequency The fundamental frequency is the lowest and most predominant frequency in a power system (e.g. the fundamental frequency of the mains voltage in the EU is 50 Hz). The fundamental frequency is also called the 1st harmonic of the system. Voltage events Dips Supply voltage dip represents temporary drops of the voltage under the nominal level. Swells Supply voltage swells represents temporary voltage increases over the nominal level. Interruptions Interruption is classified as large decrease in the voltage supply level or a complete loss of voltage. Unbalance Supply voltage unbalance arises when rms values or phase angles between consecutive phases are not equal. Harmonics Harmonics are integer frequency multiplication of the fundamental frequency (e.g. with a fundamental of 50 Hz, the 2nd harmonic is 50 x 2 = 100 Hz, 3rd harmonic is 50 x 3 = 150 Hz). Harmonics can be caused by a variety of modern day equipment including resonating transformers, switch-mode power supplies, IT equipment, etc. Interharmonics Interharmonics are harmonics that are not an integer multiplication of the fundamental frequency. The main sources of interharmonic waveform distortion are static frequency converters, induction motors and arcing devices.

Transients Transient is a term for short, highly damped momentary voltage or current disturbance. They usually appear as a consequence of external electromagnetic interferences (atmospheric electric discharges, switching manoeuvres). Flickers Flicker appears as changing illumination intensity which is a reflection of a changing voltage level. Inrush current As a motor begins the current needed to start the motor can be 10 to 15 times the normal operating current. This initial surge of current can cause dips in voltage and can be hard to analyse with normal test instruments, for this reason an analyser with a fast logging function is required. Instrument connection to the LV and MV Power Systems When connecting the instrument it is essential that both current and voltage connections are correct. In particular the following rules have to be observed: Current clamp-on current transformers • The arrow marked on the clamp-on current transformer has to point in the direction of current flow, from supply to load; • If the clamp-on current transformer is connected in reverse the measured power in that phase would normally appear negative. Phase relationships • The clamp-on current transformer connected to current input connector I1 has to measure the current in the phase line to which the voltage probe from L1 is connected. In case of events capturing, it is recommended to connect unused voltage inputs to N voltage input.

Total Harmonic Distortion (THD) THD is the ratio of a wave’s harmonic content (for voltage or current) to its fundamental component.

Energy Energy is the generation or use of electric

Total Demand Distortion (TDD) Total Demand Distortion is calculated harmonic current distortion against the full load of the electrical system. TDD gives better insight about impact of harmonic distortion in the system.

4. 2

Accessories 4.22

Connection to 1-phase 3-wire system

In Office

START

Step 1: Instrument Setup • Set Time & Date • Recharge batteries • Clear memory

Connection to 3-phase 3-wire system

Step 2: Measurement Setup Step 2.1: Sync. & wiring • Conn.Type (4W,3W,1W) • Sync channel U1I1IU12

Step 2.2: Voltage range & ratio • Voltage range • Voltage ratio

Connection to 3-phase 4-wire system

Prepare instrument for new measurement before going to measuring site. Check: • Are time and date correct? • Are batteries in good condition? • Is the Memory List empty? If it is not, download all data from previous measurements and release storage for new measurement.

Setup instrument according to the measurement point nominal voltage, currents, load type. Optionally enable events or alarms and define parameter thresholds.

Step 3: Inspection • Phase diagram • U,I,f meter screen • Power meter screen

On Measuring site

Step 2.3: Clamps setup • Clamp type • Clamp ratio

Step 2.4: (Optional) Event Setup • Nominal voltage • Thresholds

Connecting instrument to the existing current transformers in medium voltage system Step 2.5: (Optional) Alarm Setup • Define alarm and its parameters

Recommended Recording Practice Power quality measurements are specific type of measurements, which can last several days or even up to several weeks. Usually recording campaign is performed to: • Statistically analyse some point in the network. • Troubleshoot malfunctioning device or machine.

Power quality improvement Captured with Power Analyser data can be

Step 5: (Optional) Step 4: Recorder setup On Line Measurement • Select signals for • Perform measurerecording ment • Define recording start • Save waveform time, duration and snapshots interval Start recording Step 6: Measurement conclusion • Stop recorder • Power off instrument • Remove wiring • Analyse recorder data with instrument (Memory list, Event and Alarm tables)

In Office

Mostly long-term measurements are performed only once, so why it is very important to properly set measuring equipment. Measuring with wrong setting can lead to false or useless measurement results. In the following flow chart recommended recorder procedure is shown (with MI 2892 PowerMaster).

Double check Measurement setup using Phase diagram, and various scope and metering screens. Using power meter check if power is flowing in right direction (power should be positive for load and negative for generator measurements).

Measuring and Regulation Equipment Manufacturer

Step 7: Report generation (PowerView3) • Download data • Analyse data • Export to Excel or Word

Accessories 4.22

used for improvement of supplied power quality. There are different ways to increase efficiency of power supply. Cutting power peaks One of the simplest and the most efficient way to decrease the electricity power bill is by lowering peaks of consumed power (peak demand). This can be achieved by: • reorganization of production processes; • embedded generation. The first solution can be implemented in systems where some tasks can be stopped or rescheduled. The second solution can be implemented in systems with generators that are often used as a back-up power supply. Both solutions require additional monitoring and control systems that are designed upon previously conducted measurement and analysis of the situation in the field. Another possibility to increase efficiency is by increasing the power factor using corrective techniques. Capacitor Banks Capacitor banks are the devices most susceptible to the presence of harmonics. Since consumer’s loads usually have inductive characteristics, capacitor banks are used for compensation of inductive currents. This feature allows: • better overall system performance; • increasing availability of active power; • decreasing transmission loses; • increasing voltage; • decreasing financial penalty because of poor power factor. EN 50160 Standard Overview EN 50160 is one of the most important standards in field of power quality which defines, describes and specifies the main characteristics of the voltage at a network user’s supply terminals in public low voltage and medium voltage distribution networks under normal operating conditions. This standard describes the limits or values within which the voltage characteristics can be expected to remain over the whole of the public distribution network and does not describe the average situation usually experienced by an individual network user.

4. 3

Power Quality Analysers Selection Guide for Power Quality Analysers MEASUREMENTS

STANDARD IEC 61000-4-30 Compliance; Ed. 3.0

MI 2893 Power Master XT

MI 2892 Power Master

MI 2885 Master Q4

MI 2884 Energy Master XA

MI 2883 Energy Master

Class A

Class S

4 4 •/• 4

4 3 •/• 3

• • • • • • • • • •

• • • • •/•/• • • (49 kSamples/sec) • • • • • • • 1 ... 7200 s •/•

• • • • •/•/• • • (49 kSamples/sec) • • • • • • Optional 1 ... 7200 s •/•

• With optional clamp • • •/•/• • (30 kSamples/sec) • •

• With optional clamp • • •/•/• •

• • Optional 1 ... 7200 s •/•

• • •

• •

• For GPS only Optional Optional •/•

•

• • • Over a year • • 1730 V rms 1000 V rms 6 kV 50 Hz /60 Hz 42.500Hz ... 69.000Hz VFD (5 Hz - 120 Hz) 400 Hz CAT IV / 600 V CAT III / 1000 V • • 6 x AA 0.96 kg 230 x 140 x 80

• • • Over a year • • 1730 V rms 1000 V rms

(Independant certificate)

INPUTS Number of current measuring channels 4 Number of voltage measuring channels 4 Automatic range selection/auto-ranging •/• 1-phase flexible current clamps 3000/300/30 A 4 (included in Advance set (AD) and Euro set (EU) set) MEASUREMENTS TRMS Current measurement (Min., Max., AvgON) • TRMS Voltage measurement (Min., Max., AvgON) • Scope function • On-line harmonics measurement • Frequency measurement • Power measurement (W, VA, VAr) • THD and harmonics analysis • Interharmonics analysis • Power Factor cos fi and tg fi • Registration of voltage events (sags, swells, • interruptions) Statistical evaluation • Current in neutral conductor • Phase diagram • Unbalance • EN 50160 Analysis / IEEE 519 / Energy consumption optimization • / • / • Flicker measurement • Transients measurement • (1 MSamples/sec) Waveform recording • Inrush currents • VFD (variable frequency drives) • Photo voltaic efficiency measurement • Energy measurement • Signalling • Temperature measurement • Integration period 1 ... 7200 s Power measurements in compliance with IEEE 1459 / • / • Classic (vector or arithmetic) Simultaneous General / waveform • Conection check • Colour coding • COMMUNICATION PORTS USB • RS232 For GPS only GPS time synchronisation Optional Remote instruments control (4G / WiFi) Optional Remote instruments control (Ethernet / Intranet) •/• GENERAL Graphical LCD with backlight (480x272 4.3" color TFT) • On-site analysis of recorded data • Built-in power supply for flexible clamps • Maximal recording time Over a year Memory module size 8 GB supplied (up to 32 GB) • PC Software PowerView3 • Maximal test voltage – interphase value 1730 V rms Maximal test voltage – between phase and N conductors 1000 V rms Maximum transient peak voltage 6 kV Frequency range 50 Hz /60 Hz 42.500Hz ... 69.000Hz VFD (5 Hz - 120 Hz) 400 Hz Over voltage category CAT IV / 600 V CAT III / 1000 V AC power supply • Built-in battery charger • Rechargeable batteries (NiMH) 6 x AA Weight 1.10 kg Dimensions (mm) 230 x 140 x 80

4. 4

(Independant certificate)

Accessories 4.22

(Independant certificate - 0,1%) (0,2%)

(0,2%)

50 Hz /60 Hz 50 Hz /60 Hz 42.500Hz ... 69.000Hz 42.500Hz ... 69.000Hz CAT IV / 600 V CAT III / 1000 V • • 6 x AA 0.96 kg 230 x 140 x 80

CAT IV / 600 V CAT III / 1000 V • • 6 x AA 0.96 kg 230 x 140 x 80

Power Quality Analysers Differences between Power Quality Analysers Class A MI 2893 Power Master XT

MI 2892 Power Master

Flagship of our line of Class A power quality analyzers with high sampling rate for transient capturing intended for professorial users specialized for investigating transients in the network and high accuracy measurements.

Advanced selection of power quality analysers and aimed primarily at dedicated professionals, who specialize in high accuracy measurements and analysis, whose validity is backed by a Class A independent certificate.

• Class A 0,1 % (independent certificate) • Top tier PQA instrument • General recorder • Waveform recorder • Transient recorder working simultaneously with waveform and general recorder (1 MSamples/sec)

• Class A 0,1 % (independent certificate) • Advanced PQA instrument • General recorder • Waveform recorder • Transient recorder (49 kSamples/sec)

Class S MI 2885 Master Q4

MI 2884 Energy Master XA

MI 2883 Energy Master

Designed for power quality assessment and troubleshooting in low and middle voltage electrical systems and checking power correction equipment performance and verification of electrical system capacity before adding new loads.

For advanced users interested in long term monitoring and analysis of electrical systems for the purpose of energy quality and consumption management and formulation of cost saving measures with additional simultaneous waveform, inrush recording and transient detection.

For users interested in long term monitoring and analysis of electrical systems for the purpose of energy quality and consumption management and formulation of cost saving measures.

• Class S 0,1% (independent certificate) • Intermediate PQA instrument • General recorder • Waveform recorder • Transient recorder (49 kSamples/sec)

• • • • •

Class S (0,2%) Enhanced PQA instrument General recorder Waveform recorder Transient recorder (30 kSamples/sec)

• Class S (0,2%) • Basic PQA instrument • General recorder

Power Quality Analysers Comparison between Power Quality Analysers MODEL

STANDARD

IEC 61000-4-30 Compliance

EN 50160 GENERAL Limited / Standard profile RECORDER Voltage AC + DC MEASUREMENTS Current AC +DC Frequency Power measurements in compliance with IEEE 1459 / Classic (vector or arithmetic) Energy Harmonics Interharmonics Flickers and RVC Phase diagram Signalling Under/Over voltage deviation Interrupts, Dips, Swells Alarms Phase diagram Neutral current Temperature WAVEFORM Events RECORDER Alarms (TRIGGERS ON) Level I (Inrush recorder) Level U (Inrush recorder) Time interval TRANSIENT Envelope RECORDER Level (I, In, U, Un) (TRIGGERS ON) Transient selection between N / GND TROUBLESHOOTING On-line scope mode FEATURES Waveform snapshoot GPS receiver WiFi / 4G modem REMOTE COM Ethernet / Intranet MICROSD CARD 8 GB PC SW PowerView3

Measuring and Regulation Equipment Manufacturer

MI 2893 MI 2892 Power Master XT Power Master

MI 2885 Master Q4

MI 2884 MI 2883 Energy Master XA Energy Master

Class A

Class S

(0.2%)

Class A

(independent certificate) (independent certificate) (Ind. certificate - 0,1%)

• •/• • • • •/•

• • • • • • • • • • • • • • • • • • • •/• • • Optional Optional •/• • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • Optional • • • • • • •

• • • • • • • • • • Optional Optional • • • • • • •

• • • • • • • • • • Optional Optional

• • Optional Optional •/• • •

• •

Accessories 4.22

4. 5

Power Quality Analysers Selection Guide for Clamps Smart Clamps •

Description

Target application

MI 2893

MI 2892

MI 2885

MI 2884

MI 2883

1-phase mini flexible current clamp 3000/300/30 A / 1V

•

1-phase mini flexible current clamp 3000/300/30 A / 1V

•

1-phase mini flexible current clamp 3000/300/30 A / 1V

•

1-phase mini flexible current clamp 6000/600/60 A / 1V

•

1-phase flexible current clamp 3000/300/30 A /1V

•

1-phase flexible current clamp 3000/300/30 A / 1 V; cable length 5 m

•

1-phase flexible current clamp 3000/300/30 A /1V

•

1-phase flexible current clamp 6000/600/60 A /1V

•

1-phase flexible current clamp 3000/300/30 A / 1 V; High temperature

•

Current clamp 0.5/5/100/1000 A / 1 V

Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument. Single phase, high temperature (sensor: -20 to 200 ºC, module: -20 to 70 ºC) flexible current clamp with three selectable measuring ranges. Does not require external power supply as it is powered by the measuring instrument High accuracy current clamp for precise current and power measurements including leakage current measurement.

•

Current clamp 0.5/5/50A / 1V

High accuracy current clamp for precise current and power measurements including leakage current measurement. Does not require external power supply as it is powered by the measuring instrument. Mini current clamp for power measurements. Requires A 1561 connection cable.

•

Current clamp AC/DC 10A / 1V

High accuracy current clamp for precise current and power measurements including leakage current measurements.

•

Current clamp 40/300 A/1V

AC + DC current clamp for power measurements. Battery 9V.

•

Current clamp AC/DC 1500 A

AC+DC current clamp intended for power measurements, specially for photo-voltaic inverters (DC side). Battery operated (9 V)

•

Current clamp AC/DC 100/1000A / 1V

AC+DC current clamp intended for power measurements, specially for photo-voltaic inverters and DC/AC converters /DC side). Battery operated (9V). Requires A 1561 connection cable.

•

Current transformer 5A/1V

3-phase transformer for power measurements on distribution panels.

•

Mini current clamp 100 A / 1 V

A 1037

A 1717

A 1636

A 1391 PQA

A 1398 PQA

A 1069

A 1588

A 1281

A 1582

A 1446

A 1445

A 1227 5M

A 1227

A 1503

A 1609

A 1502

A 1501

Part No.

•

SMART CLAMPS KEY FEATURES: • • • •

Cover wide current range; Are automatically recognized by the instrument; Are switchless (range selection on the instrument); Do not require external power supply.

4. 6

Accessories 4.22

Power Quality Analysers Selection Guide for Clamps Type

Jaw opening/loop

Ranges

Measurement Ranges

RMS accuracy 50/60 Hz

Phase accuracy 50/60 Hz

RMS accuracy 1500 Hz

Phase accuracy 1500 Hz

Overvoltage category; IP

s-Flex

fi 7 cm Sensor length: 25 cm

30 A 300 A 3000 A

3 A ... 60 A 5 A ... 600 A 50 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

s-Flex

fi 14 cm Sensor length: 48 cm

30 A 300 A 3000 A

3 A ... 60 A 5 A ... 600 A 50 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

s-Flex

fi 54 cm Sensor length: 175 cm

30 A 300 A 3000 A

3 A ... 60 A 5 A ... 600 A 50 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

s-Flex

fi 27 cm Sensor length: 90 cm

60 A 600 A 6000 A

6 A ... 120 A 10 A ... 1200 A 100 A ... 12000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Flex

fi 14 cm Sensor length: 48 cm

30 A 300A 3000 A

3 A ... 60 A 10 A ... 600 A 60 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Flex

fi 14 cm Sensor length: 48 cm Cable length: 5 m

30 A 300A 3000 A

3 A ... 60 A 10 A ... 600 A 60 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Flex

fi 19 cm Sensor length: 61 cm

30 A 300A 3000 A

3 A ... 60 A 10 A ... 600 A 60 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Flex

fi 27 cm Sensor length: 90 cm

60 A 600A 6000 A

6 A ... 120 A 20 A ... 1200 A 120 A ... 12000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Flex

fi 19 cm Sensor length: 61 cm

30 A 300A 3000 A

3 A ... 60 A 10 A ... 600 A 60 A ... 6000 A

±1% ±1% ±1%

< 1°

±3%

< 10°

CAT IV / 600 V; IP 64

Iron

Jaw opening: 5.2 cm Max. conductor size < 50 mm

0.5 A 5A 100 A 1000 A

50 mA ... 1 A 0.5 A ... 10 A 10 A ... 175 A 100 A ... 1200 A

± 0,5 % ± 0,5 % ± 0,5 % ± 1,2 %

< 0.5°

± 1.5 %

< 1.5°

CAT III / 600 V; IP 20

Iron

Jaw opening: 40 mm Max. conductor size < 50 mm

0.5A 5A 50A

50 mA ... 1 A 0.5 A ....10 A 5 A ... 100 A

± 0.5 % ± 0.5 % ± 0.5 %

< 0.5 °

± 1.5 %

<3°

CAT II / 600 V; IP 40

Iron

Jaw opening: 13 mm Jaw cross-section: 15 x 17 mm

100 A 10 A

5 A ... 200 A 500 mA ... 20 A

±1% ±1%

< 3°

±3%

< 2°

CAT III / 600 V; IP 20

Jaw opening: 13 mm Max. conductor size < 13 mm

10 A

0.5A .... 20 A

± 0.5%

< 0.45°

± 1.5 %

< 3°

CAT II / 300 V; IP 40

Iron

Jaw opening: 2.5 cm Max. conductor size < 22mm

40 A 300 A

2 A ... 40 A 20 A ... 300 A

±3% ±3%

< 3°

±3%

< 10°

CAT IV / 600 V; IP 64

Iron

Jaw opening: 7,3 cm Max. conductor size < 68 mm

AC/DC 1500 A

45 ... 1500 A

±3 % FS

<3°

±3 % FS

<6°

CAT III / 600 V; IP 40

Iron

Jaw opening: 5.1 cm Max. conductor size < 52 mm

100 A 1000 A

3 A ... 100 A 30 A ... 1000 A

±1 % m.v. ±1 A < 0.5°

±2%

< 1.5°

CAT III / 600 V; IP 40

Iron

N/A

0.5 A 5A

10 mA ... 1 A 0.5 A ... 10 A

±0,3 % ±0,3 %

±1%

< 1.0°

CAT III / 600 V; IP 40

A 1037

A 1717

A 1636

A 1391 PQA

A 1398 PQA

A 1069

A 1588

A 1281

A 1582

A 1446

A 1445

A 1227 5M

A 1227

A 1503

A 1609

A 1502

A 1501

Part No.

< 0.5°

Ranges are specified for pure sine wave, reduced crest factor (< 1.5),

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 7

Power Quality Analysers

Power Quality Analysers MI 2893 Power Master XT The MI 2893 Power Master XT is a hand-held three phase power quality analyzer with a large easyto-read graphical color display enabling the user to detect harmonics, phasors, waveforms and transients with sampling frequency 1 MSamples/sec in the installation simply by connecting the device. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in three-phase and singlephase power distribution systems. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview for troubleshooting. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct and remote reading from the micro SD memory card, analysis of long term records and automatic creation of professional test report.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Voltage: TRMS, peak, crest factor (4-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • VFD (variable frequency drive, 5 Hz – 120 Hz), 400 Hz; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics, THD and TDD measurements; • Energy (active, apparent, reactive, apparent, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Inrush currents monitoring and recording; • Waveform/inrush displaying, snapshot and recording; • Transients with sampling frequency 1 MSamples/sec; • Power quality analysis according to EN 50160, IEEE 519; • Recording up to 7 adjustable alarms; • Temperature measurement; • Power factor, cos fi and tg fi.

• 4-voltage channels with wide measurement range; • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Current clamp auto range selection; • Sampling frequency on transients recording > 1 MSamples/sec, on 8 channels simultaneously; • Compliance with power quality standard IEC 61000-4-30 Class A; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the AD/EU set; • Remote communication via Ethernet: • GPS clock synchronization (optional).

• High speed transient capturing; • Energy consumption optimization; • Power quality assessment and trou bleshooting in low and middle voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads.

4. 8

Accessories 4.22

STANDARDS Safety: • EN 61010-1 Measurements: • IEC/EN 61000-4-30,Class A; • IEC/EN 61557-12; • IEC/EN 61000-4-7, Class I; • IEC/EN 61000-4-15; • EN 50160; • IEEE 1459; • IEEE 519 Electromagnetic compatibility (EMC): • EN 61326

TECHNICAL DATA

Single phase connection Measuring range Three phase connection Single phase connection Max. transient peak voltage Accuracy Sampling rate Mains frequency range Current inputs Number of inputs Measuring range: Range 1 Range 2 Functions Power (P, Q, S, cos φ, PF…) Energy Harmonics (DC ... 50th) @50/60 Hz Harmonics (DC ... 13th) @400 Hz Harmonics (DC ... 20th) @VFD (5 - 16 Hz) Harmonics (DC ... 13th) @VFD (16 - 33 Hz) Harmonics (DC ... 5th) @VFD (33 - 120 Hz) Interharmonics (1 ... 50th) @ 50/60 Hz Interharmonics (1 ... 20th) @VFD (5 - 16 Hz) Interharmonics (1 ... 13th) @VFD (16 - 33 Hz) Interharmonics (1 ... 5th) @VFD (33 - 120 Hz) Flicker Mains signalling Unbalance Temperature Dips, Swell Interrupts Recorders Memory General recorder Integration period Recorded signals

Duration Waveform recorder Duration Trigger Transient recorder Sampling rate Duration Trigger

General Display Communication Time synchronisation Power supply Overvoltage category Weight Dimensions STANDARD SET MI 2893 Advanced set (AD) • Instrument Power Master XT • 1-phase flexible current clamps 3000 / 300 / 30 A • (A 1502), 4 pcs • Test probe, (brown, black, grey, green, blue), 5 pcs • Crocodile clip, (brown, black, grey, green, blue), 5 pcs • Voltage measurement lead, (brown, black, grey, • green, blue), 5 pcs • Labels for colour coding • Temperature probe • microSD memory card 8.0GB • microSD card reader

AC+DC 5 Phase (L-N): 50 … 1000 V RMS Line (L-L): 87 … 1730 V Phase (L-N): 50 … 500 V RMS 10 % … 150 % of nominal voltage 10 % … 110 % of nominal voltage ±6 kV IEC 61000-4-30 Class A, ±0.1% of nominal voltage, 7 kSamples per second @ 50/60 Hz, synchronization with main frequency 1.7 kSamples per second @ VFD (5 Hz - 120 Hz) 12.2 kSamples per second @ 400 Hz 42,5 ... 69,0 Hz ±10 mHz 5 ... 120 Hz ± 10 mHz (VFD) 335,0 ... 465,0 Hz ± 100 mHz AC+DC 4 10.0 mVRMS ... 300.0 mVRMS ±0.25 % URMS 50.0 mVRMS ... 3.000 VRMS ±0.25 % URMS Measuring range Depends on voltage and selected clamps Depends on voltage and selected clamps 0 ... 20% of nom. voltage

Accuracy IEC 61557-12 Class 1 Active: IEC 62053-21 Class 1 Reactive: IEC 62053-23 Class 2 IEC 61000-4-7 Class 1

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

0.2 ... 10 0 ... 15% of nom. voltage Voltage: 0 ... 5% Current: 0 ... 20% -10 ... 85 °C 10 ... 150% of nom. voltage

IEC 61000-4-15 Class F3 IEC 61000-4-30 Class A ±0.5 °C ±0.2 % of nominal voltage ±1 cycle ±1 cycle

0 ... 10% of nom. voltage 8GB microSD, up to 32GB supported

1s … 2h > 1000 (voltages, currents, harmonics, power…) Minimal, maximal, average and average ON value per interval, including - Voltage events (dip, swell, interupt) - Custom alarms (up to 7 programmable alarms) - Signalling (up to two selectable frequecies) - Transients - Inrush > 1 year (depends on size of SD card at 10 min registration period) Up to 60 seconds duration and 30 seconds pretrigger of voltage and current waveform Up to 1500 records Manual, Voltage Events, Custom Alarms, Voltage or current level (inrush), Time interval 1 MSamples/sec; simultaneously on all 8 channels One cycle of voltage and current waveforms Transient selection measurement between L-N/L-GND Envelope and level trigger simultaneously Transient recorder runs simultaneously with general and waveform recorder Set & go transient setup; predefined setup (low and high level) for current and voltage trigger 4.3 inch color TFT (480 x 272) USB, Ethernet GPS receiver (A 1355) With power supply adapter or 6 x NiMh rechargable batteries, size AA CAT IV / 600 V For three phase connection CAT III / 1000 V 1,1 kg 230 x 140 x 80 mm • • • • • • •

PC SW PowerView3 USB and Ethernet patch cable Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Professional protective waterproof case (A 1685) Instruction manual Calibration certificate

Picture of MI 2893 AD set

FUNCTION Voltage inputs Number of inputs Nominal voltage range Three phase connection

MI 2893 Euro set (EU) • With 1-phase flexible current clamps 3000 / 300 / 30 A (A 1227), 4pcs MI 2893 Standard set (ST) • Without flexible current clamps

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 9

Power Quality Analysers

Power Quality Analysers MI 2892 Power Master The MI 2892 Power Master is a hand-held three phase power quality analyser with a large easy-to-read graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by connecting the device. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in three-phase and singlephase power distribution systems. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview for troubleshooting. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Voltage: TRMS, peak, crest factor (4-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • VFD (variable frequency drive, 5 Hz – 120 Hz), 400 Hz; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics, THD and TDD measurement; • Energy (active, reactive, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Inrush currents monitoring and recording; • Waveform/inrush displaying, snapshot and recording; • Transients recording; • Power quality analysis according to EN 50160, IEEE 519; • Recording up to 7 adjustable alarms; • Temperature measurement; • Photo-voltaic inverter efficiency measurements; • Power factor cos fi and tg fi.

• 4-voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V); • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Sampling frequency on transients recording 49 kSamples/sec on 8 channels simultaneously; • Compliance with power quality standard IEC 61000-4-30 Class A; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Current clamp auto range selection; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro set; • Remote communication via Ethernet (GPS clock synchronization - optional).

• Energy consumption optimization; • Power quality assessment and trou bleshooting in low and middle voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads.

4. 10

Accessories 4.22

TECHNICAL DATA

Mains frequency range Current inputs Number of inputs Measuring range: Range 1 Range 2 Functions Power (P, Q, S, cos fi, PF…) Energy Harmonics (DC ... 50th) @50/60 Hz Harmonics (DC ... 13th) @400 Hz Harmonics (DC ... 20th) @VFD (5 - 16 Hz) Harmonics (DC ... 13th) @VFD (16 - 33 Hz) Harmonics (DC ... 5th) @VFD (33 - 120 Hz) Interharmonics (1 ... 50th) @ 50/60 Hz Interharmonics (1 ... 20th) @VFD (5 - 16 Hz) Interharmonics (1 ... 13th) @VFD (16 - 33 Hz) Interharmonics (1 ... 5th) @VFD (33 - 120 Hz) Flicker Mains signalling Unbalance Temperature Dips, Swell Interrupts Recorders Memory General recorder Integration period Recorded signals

Duration Waveform recorder Duration Trigger Transient recorder Sampling rate Duration Trigger General Display Communication Time synchronisation Power supply Overvoltage category Weight Dimensions

STANDARD SET MI 2892 Advanced set (AD) • Instrument Power Master • 1-phase flexible current clamps 3000 / 300 / 30 A (A 1502), 4 pcs • Test probe, (brown, black, grey, green, blue), 5 pcs • Crocodile clip, (brown, black, grey, green, blue), 5 pcs • Voltage measurement lead, (brown, black, grey, green, blue), 5 pcs • Labels for color coding • Temperature probe • microSD memory card 8.0GB • microSD card reader

AC+DC 5 Phase (L-N): 50 ... 1000 Vrms / Line (L-L): 50 ... 1730 Vrms 10% ... 150% of nominal voltage IEC 61000-4-30 Class A, ±0.1% of nominal voltage, 7 kSamples per sec @ 50/60 Hz, sync with mains freq. 1.7 kSamples per sec @ VFD (5 Hz - 120 Hz) 12.2 kSamples per sec @ 400 Hz 42,5 ... 69,0 Hz ±10 mHz 5 ... 120 Hz ± 10 mHz (VFD) 335,0 ... 465,0 Hz ± 100 mHz AC+DC 4 10.0 mVRMS ... 300.0 mVRMS ±0.25 % URMS 50.0 mVRMS ... 3.000 VRMS ±0.25 % URMS Measuring range Depends on voltage and selected clamps Depends on voltage and selected clamps 0 ... 20% of nom. voltage

Accuracy IEC 61557-12 Class 1 Active: IEC 62053-21 Class 1 Reactive: IEC 62053-23 Class 2 IEC 61000-4-7 Class 1

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

0.2 ... 10 0 ... 15% of nom. voltage Voltage: 0 ... 5% Current: 0 ... 20% -10 ... 85 °C 10 ... 150% of nom. voltage

IEC 61000-4-15 Class F3 IEC 61000-4-30 Class A ±0.5 °C ±0.2 % of nominal voltage ±1 cycle ±1 cycle

0 ... 10% of nom. voltage 8GB microSD, up to 32GB supported 1s … 2h > 1000 (voltages, currents, harmonics, power…) Minimal, maximal and average value per interval - Voltage events - Custom alarms > 1 year (depends on size of SD card)

Up to 60 seconds of voltage and current waveform Manual, Voltage Events, Custom Alarms, voltage or current level (inrush) > 49ksamples/sec Up to 50 cycles of voltage and current waveform Manual, voltage envelope or level 4.3 inch colour TFT (480 x 272) USB, Ethernet, RS-232 GPS receiver (A 1355) 110 ... 240 Vac or 6 x NiMh rechargeable batteries, size AA CAT IV / 600 V or CAT III / 1000 V 0,96 kg 230 x 140 x 80 mm

• • • • • • •

PC SW PowerView3 USB and Ethernet patch cable Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Professional protective waterproof case (A 1685) Instruction manual Calibration certificate

Picture of MI 2892 AD set

FUNCTION Voltage inputs Number of inputs Nominal voltage range (L – N) Measuring range Accuracy Sampling rate

MI 2892 Euro set (EU) • With 1-phase flexible current clamps 3000 / 300 / 30 A (A 1227), 4pcs MI 2892 Standard set (ST) • Without flexible current clamps

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 11

Power Quality Analysers

Power Quality Analysers MI 2885 Master Q4 The MI 2885 Master Q4 is an ideal troubleshooting tool. The recorders are designed to automatically record all important data and waveforms of voltage events like Dips and Swells. In addition the user can set 7 optional triggers for capturing waveforms of selected quantities. A large easy-toread graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by connecting the device. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in threephase and single-phase power distribution systems. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.

MEASURING FUNCTIONS

KEY FEATURES

• Voltage: TRMS, peak, crest factor (4-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • VFD (variable frequency drive, 5 Hz – 120 Hz), 400 Hz; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics, THD and THD measurement; • Energy (active, reactive, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Inrush currents monitoring and recording; • Waveform/inrush displaying, snapshot and recording; • Transients recording; • Power quality analysis according to EN 50160, IEEE 519; ; • Recording up to 7 adjustable alarms; • Temperature measurement; • Photo-voltaic inverter efficiency measurements; • Power factor cos fi and tg fi.

• 4-voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V); • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Sampling frequency on transients recording 49 kSamples/sec on 8 channels simultaneously; • Compliance with power quality standard IEC 61000-4-30 Class S (0.1%); • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32 GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Current clamp auto range selection; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro set;

4. 12

Accessories 4.22

• Remote communication via Ethernet (GPS clock synchronization - optional).

APPLICATION • Energy consumption optimization; • Power quality assessment and trou bleshooting in low and middle voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads.

STANDARDS Safety: • EN 61010-1 Measurements: • IEC/EN 61000-4-30,Class S; • IEC/EN 61557-12; • IEC/EN 61000-4-7, Class I; • IEC/EN 61000-4-15; • EN 50160; • IEEE 1459; • IEEE 519 Electromagnetic compatibility (EMC): • EN 61326

TECHNICAL DATA

Measuring range Accuracy Sampling rate Mains frequency range

Current inputs Number of inputs Measuring range: Range 1 Range 2 Functions Power (P, Q, S) Energy

AC+DC 5 Phase (L-N): 50 ... 1000 VRMS Line (L-L): 50 ... 1730 VRMS 10% ... 150% of nominal voltage IEC 61000-4-30 Class S, ±0.1% of nominal voltage, 7 kSamples per sec @ 50/60 Hz, sync with mains freq. 1.7 kSamples per sec @ VFD (5 Hz - 120 Hz) 12.2 kSamples per sec @ 400 Hz 42,5 ... 69,0 Hz ±10 mHz 5 ... 120 Hz ± 10 mHz (VFD) 335,0 ... 465,0 Hz ± 100 mHz AC+DC 4 10.0 mVRMS ... 300.0 mVRMS ±0.25 % URMS 50.0 mVRMS ... 3.000 VRMS ±0.25 % URMS Measuring range Depends on voltage and selected clamps Depends on voltage and selected clamps 0 ... 20% of nom. voltage

Accuracy IEC 61557-12 Class 1 Active: IEC 62053-21 Class 1 Reactive: IEC 62053-23 Class 2 IEC 61000-4-7 Class 1

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

IEC 61000-4-15 Class F3 IEC 61000-4-30 Class S

Temperature Dips, Swell

0.2 ... 10 0 ... 15% of nom. voltage Voltage: 0 ... 5% Current: 0 ... 20% -10 ... 85 °C 10 ... 150% of nom. voltage

Interrupts

0 ... 10% of nom. voltage

Harmonics (DC ... 50th) @50/60 Hz Harmonics (DC ... 20th) @VFD (5 - 16 Hz) Harmonics (DC ... 13th) @VFD (16 - 33 Hz) Harmonics (DC ... 5th) @VFD (33 - 120 Hz) Interharmonics (1 ... 50th) @ 50/60 Hz Interharmonics (1 ... 20th) @VFD (5 - 16 Hz) Interharmonics (1 ... 13th) @VFD (16 - 33 Hz) Interharmonics (1 ... 5th) @VFD (33 - 120 Hz) Flicker Mains signalling Unbalance

Recorders Memory General recorder Integration period Recorded signals

Duration Waveform recorder Duration Trigger Transient recorder Sampling rate Duration Trigger General Display Communication Time synchronisation Power supply Overvoltage category Weight Dimensions

STANDARD SET MI 2885 Advanced set (AD) • Instrument Power Q4 • 1-phase flexible current clamps 3000 / 300 / 30 A (A 1502), 4 pcs • Test probe, (brown, black, grey, green, blue), 5 pcs • Crocodile clip, (brown, black, grey, green, blue), 5 pcs • Voltage measurement lead, (brown, black, grey, green, blue), 5 pcs • Labels for color coding • microSD memory card 8.0GB • microSD card reader • PC SW PowerView3

±0.5 °C ±0.2 % of nominal voltage ±1 cycle ±1 cycle

8GB microSD, up to 32GB supported 1s … 2h > 1000 (voltages, currents, harmonics, power…) Minimal, maximal and average value per interval - Voltage events - Custom alarms > 1 year (depends on size of SD card) Up to 60 seconds of voltage and current waveform Manual, Voltage Events, Custom Alarms, Voltage or current level (inrush), Time interval > 49ksamples/sec Up to 50 cycles of voltage and current waveform Manual, voltage envelope or level 4.3 inch color TFT (480 x 272) USB, Ethernet GPS receiver (A 1355) 110 ... 240 Vac or 6 x NiMh rechargable batteries, size AA CAT IV / 600 V or CAT III / 1000 V 0,96 kg 230 x 140 x 80 mm

• • • • • •

USB and Ethernet patch cable Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate

Picture of MI 2885 AD set

FUNCTION Voltage inputs Number of inputs Nominal voltage range (L – N)

MI 2885 Euro set (EU) • With 1-phase flexible current clamps 3000 / 300 / 30 A (A 1227), 4pcs MI 2885 Standard set (ST) • Without flexible current clamps

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 13

Power Quality Analysers

Power Quality Analysers MI 2884 Energy Master XA The MI 2884 Energy Master XA is a hand-held three phase power quality analyser, specially designed for energy logging detection of harmonics, phasors and waveforms anomalies in the installation simply by connecting the device. Reducing energy use reduces energy costs and may result in a financial cost saving. Energy Master XA serves as a perfect tool for long term recording and later post processing of recorded data. Large easyto-read graphical colour display enabling the user on site analysis and data checks. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long-term records and automatic creation of professional test report.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Voltage: TRMS, peak, crest factor (3-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics, THD and TDD measurement; • Energy (active, reactive, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Inrush currents monitoring and recording; • Waveform/inrush displaying, snapshot and recording; • Transients recording; • Power quality analysis according to EN 50160, IEEE 519; • Recording up to 7 adjustable alarms; • Temperature measurement; • Power factor cos fi and tg fi.

• 3-voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V); • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Sampling frequency on transients recording 30 kSamples/sec; • Compliance with power quality standard IEC 61000-4-30 Class S; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Current clamp auto range selection; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro set.

• Energy consumption optimization; • Power quality assessment and troubleshooting in low and middle voltage electrical systems; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads.

4. 14

Accessories 4.22

TECHNICAL DATA FUNCTION

Measuring range Accuracy Sampling rate Mains frequency range

AC+DC 4 Phase (L-N): 50 ... 1000 VRMS Line (L-L): 50 ... 1730 VRMS 10% ... 150% of nominal voltage IEC 61000-4-30 Class S, ±0.2% of nominal voltage, 7 kSamples per sec @ 50/60 Hz, sync with mains freq. 42,5 ... 69,0 Hz ±10 mHz

Current inputs Number of inputs Measuring range: Range 1 Range 2

AC+DC 4

Functions

Measuring range

Accuracy

Power (P, Q, S)

Depends on voltage and selected clamps

IEC 61557-12 Class 2

Energy

Depends on voltage and selected clamps

Active: IEC 62053-21 Class 2 Reactive: IEC 62053-23 Class 3

Harmonics (DC ... 50th)

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

Interharmonics (1 ... 50th)

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

Flicker

0.2 ... 10

IEC 61000-4-15 Class F3

Mains signalling

0 ... 15% of nom. voltage

IEC 61000-4-30 Class S

Unbalance

Voltage: 0.5 ... 5.0% Current: 0.0 ... 20%

Temperature

-10 ... 85 °C

±0.5 °C

Dips, Swell

10 ... 150% of nom. voltage

±0.2 % of nominal voltage ±1 cycle

Interrupts

0 ... 10% of nom. voltage

±1 cycle

Recorders Memory

8GB microSD, up to 32GB supported

General recorder Integration period Recorded signals

10.0 mVRMS ... 300.0 mVRMS ±0.5 % URMS 50.0 mVRMS ... 3.000 VRMS ±0.5 % URMS

Duration

1s … 2h > 1000 (voltages, currents, harmonics, power…) Minimu, maximum, average and average ON value - Voltage events - Custom alarms > 1 year (depends on size of SD card)

Waveform recorder Duration Trigger

Up to 60 seconds of voltage and current waveform Manual, Voltage Events, Custom Alarms, voltage or current level (inrush)

Transient recorder Sampling rate Duration Trigger

30ksamples/sec Up to 50 cycles of voltage and current waveform Manual, voltage envelope or level

General Display Communication Power supply Overvoltage category Weight Dimensions

4.3 inch color TFT (480 x 272) USB 110 ... 240 Vac or 6 x NiMh rechargable batteries, size AA CAT IV / 600 V or CAT III / 1000 V 0,96 kg 230 x 140 x 80 mm

STANDARD SET MI 2884 Advanced set (AD) • Instrument Energy Master XA • 1-phase flexible current clamps 3000 / 300 / 30 A (A 1502), 3 pcs • Test probe, (brown, black, grey, blue), 4 pcs • Crocodile clip, (brown, black, grey, blue), 4 pcs • Voltage measurement lead, (brown, black, grey, blue), 4 pcs • Labels for color coding • microSD memory card 8.0GB • microSD card reader • PC SW PowerView3

• • • • • •

USB cable Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate

Picture of MI 2884 EU set

Voltage inputs Number of inputs Nominal voltage range (L – N)

MI 2884 Euro set (EU) • With 1-phase flexible current clamps 3000 / 300 / 30 A (A 1227), 3pcs MI 2884 Standard set (ST) • Without flexible current clamps

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 15

Power Quality Analysers

Power Quality Analysers MI 2883 Energy Master The MI 2883 Energy Master is a hand-held three phase power quality analyser, specially designed for energy logging and subsequently efficiency calculation. Reducing energy use reduces energy costs and may result in a financial cost saving. Energy Master serves as a perfect tool for long term logging and later post processing of recorded data. Large easy-to-read graphical colour display enabling the user on site analysis and data checks. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• Voltage: TRMS, peak, crest factor (3-channel); • Current: TRMS, peak, crest factor (4-channel); • Power (active, reactive, apparent); • Power measurements fully compliant with IEEE 1459 (active, non active, fundamental, harmonic, load unbalance) and classic (vector or arithmetic) method; • Unbalance, flicker measurement; • Harmonic and interharmonic analysis up to 50th harmonics THD and TDD measurement; • Energy (active, reactive, generated, consumed); • Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); • Power quality analysis according to EN 50160; • Recording up to 7 adjustable alarms; • Temperature measurement; • Power factor cos fi and tg fi.

• 3-voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V); • 4-current channels with support for automatic clamp recognition and “on instrument“ range selection; • Automatic Smart Clamp detection and Smart Clamp range selection; • Compliance with power quality standard IEC 61000-4-30 Class S; • Complete power quality analysis according to EN 50160 including signalling and interharmonics; • Support for microSD memory card (8-GB supplied with the instrument) up to 32GB; • Color-coded input terminals and terminal labels to suit your application region; • Intuitive main menu and large icons that makes the equipment very easy to navigate and configure; • Current clamp auto range selection; • Powerful PC SW PowerView3 enables downloading, view, analysis of recorded data and professional report creation; • Flexible clamps (without additional power supply) are included in the Euro set.

• Energy consumption optimization; • Checking power correction equipment performance; • Long-term analysis; • Predictive maintenance; • Verification of electrical system capacity before adding loads.

4. 16

Accessories 4.22

TECHNICAL DATA FUNCTION

Measuring range Accuracy Sampling rate Mains frequency range

Current inputs Number of inputs Measuring range: Range 1 Range 2

AC+DC 4

Functions

Measuring range

Accuracy

Power (P, Q, S)

Depends on voltage and selected clamps

IEC 61557-12 Class 2

Energy

Depends on voltage and selected clamps

Active: IEC 62053-21 Class 2 Reactive: IEC 62053-23 Class 3

Harmonics (DC ... 50th)

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

Interharmonics (1 ... 50th)

0 ... 20% of nom. voltage

IEC 61000-4-7 Class 1

Flicker

0.2 ... 10

IEC 61000-4-15 Class F3

Mains signalling

0 ... 15% of nom. voltage

IEC 61000-4-30 Class S

Unbalance

Voltage: 0.5 ... 5.0% Current: 0.0 ... 20%

Temperature

-10 ... 85 °C

±0.5 °C

Dips, Swell

10 ... 150% of nom. voltage

±0.2 % of nominal voltage ±1 cycle

Interrupts

0 ... 10% of nom. voltage

±1 cycle

Recorders Memory

8GB microSD, up to 32GB supported

General recorder Integration period Recorded signals

10.0 mVRMS ... 300.0 mVRMS ±0.5 % URMS 50.0 mVRMS ... 3.000 VRMS ±0.5 % URMS

Duration

1s … 2h > 1000 (voltages, currents, harmonics, power…) Minimu, maximum, average and average ON value - Voltage events - Custom alarms > 1 year (depends on size of SD card)

General Display Communication Power supply Overvoltage category Weight Dimensions

4.3 inch color TFT (480 x 272) USB 110 ... 240 Vac or 6 x NiMh rechargable batteries, size AA CAT IV / 600 V or CAT III / 1000 V 0,96 kg 230 x 140 x 80 mm

STANDARD SET MI 2883 Advanced set (AD) • Instrument Energy Master • 1-phase flexible current clamps 3000 / 300 / 30 A (A 1502), 3 pcs • Test probe, (brown, black, grey, blue), 4 pcs • Crocodile clip, (brown, black, grey, blue), 4 pcs • Voltage measurement lead, (brown, black, grey, blue), 4 pcs • Labels for color coding • microSD memory card 8.0GB • microSD card reader • PC SW PowerView3

• • • • • •

USB cable Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate

Picture of MI 2883 AD set

Voltage inputs Number of inputs Nominal voltage range (L – N)

MI 2883 Euro set (EU) • With 1-phase flexible current clamps 3000 / 300 / 30 A (A 1227), 3pcs MI 2883 Standard set (ST) • Without flexible current clamps

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 17

Power Quality Analysers

Power Quality Analysers A 1685 / A 1565 / A 1577 Professional protective waterproof case Extreme atmospheric conditions can wreak havoc on even the sturdiest of instruments, especially if left unprotected for some time. Still, many testing and measuring situations take place in outdoor environments, where there could be few appropriate shelters or the measured application itself is exposed to the weather. Power quality analysis or more specifically long-term recording of power parameters is one such example as it is performed over a longer period of time and often in more demanding environments. For such situations and for our line power quality analysers, we have developed the A 1565 Waterproof case for outdoor application and recordings (pylons, switchyards).

A 1685 - PROFESSIONAL WATERPROOF TRANSPORT CASE A 1685 Professional protective waterproof case is used for storing and suitable for easy transfer of PQA instrument and all accessories needed on the testing field, like: • A 1479 wide range power supply • A 1355 GPS receiver

A 1685 Professional protective waterproof carrying case, rated as an IP67, made from high-impact polypropylene. It has an automatic pressure equalization valve to ensure easy opening after altitude or temperature changes as well as a lock to discourage potential theft. The inside is

Dimensions: 464 x 366 x 176 mm Net weight: 3.0 kg Temp. resistant: -30 … 90 °C

• Optional flexible or iron current clamps • Additional batteries, test voltage leads, crocodiles, test probes, storage devices, card reader, SD memory card • All optional accessories including optional current clamps

covered in soft, pliant foam with cut-out compartments for the PQA instrument and all necessary accessories. Tough, yet lightweight, and entirely waterproof, this hard protective carrying case offer premium protection of Power Quality instruments.

Note: by default, A 1685 case does not include any equipment. The contents of the suitcase should be agreed with the sales representative.

4. 18

Accessories 4.22

A 1565 - PROFESSIONAL WATERPROOF TRANSPORT CASE FOR OUTDOOR INSTALLATION A 1565 Waterproof case for outdoor application and recordings (pylons, switchyards), enabling installation of: • PQA instrument • A 1479 Wide range power supply • A 1622 3G/Wi-Fi router • A 1355 GPS receiver • A 1227 Flexible current clamps

The inside is covered in soft, pliant foam with cut-out compartments for the PQA instrument and with wide range power supply A 1479, 3G/WiFi-Router A 1622 and a GPS receiver A 1355. The case includes standard voltage measurement cables for all voltage connections and 4 current probe adapter current clamps.

Dimensions: 420x 325x 250 mm Net weight: 4.0 kg

A 1565 Waterproof, portable case, rated as an IP 65, made from high-impact polypropylene intended for outdoor pylon installation of PQ instruments. This portable lockable case is intended to be used in combination with PQA instruments. It has an automatic pressure equalization valve to insure easy opening after altitude or temperature changes as well as a lock to discourage potential theft.

To facilitate even greater level of protection on the A 1565 model, the connection leads, including current clamps, for the instrument are integrated into the case itself and extend to the lid mounted bag with enough additional room for current clamps and other miscellaneous accessories. For installation of pylons, the case has two suspension rings on the back, through which lanyards can be threaded.

Note: A 1565 case includes voltage test leads and requested current clamps. Other optional equipment (accessories) should be agreed with the sales representative.

Overvoltage category: CAT IV / 600 V or CAT III / 1000 V Temp. resistant: -30 … 80 °C

A 1577 - PROFESSIONAL WATERPROOF TRANSPORT CASE WITH TELESCOPIC HANDLE AND WHEELS A 1577 Professional protective waterproof case is designed for storing and suitable for easy transfer of PQA instrument and all accessories needed on the testing field, like: • A 1479 wide range power supply • A 1622 3G/Wi-Fi router • A 1355 GPS receiver • Optional flexible or iron current clamps

from high-impact polypropylene. It has an automatic pressure equalization valve to insure easy opening after altitude or temperature changes as well as a lock to discourage potential theft. The inside is covered in soft, pliant foam with cut-out compartments for the PQA instrument and much more available and organized space for additional accessories.

Dimensions: 610 x 430 x 265 mm Net weight: 6.8 kg Temp. resistant: -30 … 80 °C

• Additional batteries, test voltage leads, crocodiles, test probes, storage devices, card reader, SD memory card • All optional accessories including optional current clamps

Case is equipped with a telescopic handle and smooth-running wheels for easiest transport and offers excellent mobile protection for all of your equipment. Tough, yet lightweight, and entirely waterproof, this hard protective carrying case offer premium protection of Power Quality instruments.

Note: by default, A 1577 case does not include any equipment. The contents of the suitcase should be agreed with the sales representative.

A 1577 Professional protective waterproof carrying case, rated as an IP67, made

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 19

Power Quality Analysers

Other instruments / adapters / accessories CS 2890 Power Calibrator / Simulator The CS 2890 Power Calibrator/ Simulator is handheld multifunction four-phase instrument intended for calibrating and adjusting Metrel Power Quality Class A and Class S instruments as well as simulation of typical voltages and current power quality phenomena’s and situations on electrical network.

GENERAL

POWER SIMULATOR

ADJUSTMENT

• Simple and powerful waveform generator with various settings. • 4 voltage channels with wide simulation range: up to 350 Vrms. • 4 current channels with current clamps simulation up to 2000 A. • Simultaneous voltage and current (8 channels) simulation, 16-bit Digital to Analogue conversion for accurate signal generation. • Saving current system settings on power off. • 4.3’’ TFT colour display. • Calibration of METREL Class A and Class S Power Quality devices. • Adjustment of METREL Class A and Class S Power Quality devices. • Training purposes. • Demonstration of PQA testing equipment by sales personnel. • Education of power quality phenomena.

• Dip, swell, interrupt, signalling, transient and inrush events simulation. • Voltage and current harmonics waveform simulation. • Unbalanced voltage and current waveform simulation. • Square flicker simulation. • Various character load/character type (inductive/capacitive) combination simulation. • Thorough signal parameters settings. • Programming event occurrence (key, manual, periodically, random). • Voltage, Current, Frequency; • Harmonics, Phase angle, Phase sequence, Unbalance (U,I);

• Adjustment of METREL power quality devices Class A (MI 2893, MI 2892) and Class S (MI 2885, MI 2883).

4. 20

CALIBRATOR • Calibration of METREL power quality devices Class A (MI 2893, MI 2892) and Class S (MI 2885, MI 2883) - predefined calibration points, related to the tested instruments.

Accessories 4.22

KEY FEATURES CALIBRATOR/ ADJUSTMENT • Voltage/current stability in the predefined calibration/adjustment points better than ±0.06% under prescribed environmental conditions. • Fine adjustment of calibration points with substandard volt-meter control measurements.

STANDARDS Safety: • EN 61010-1: 2010 Electromagnetic compatibility (EMC): • EN 61326-2-2: 2013

TECHNICAL SPECIFICATION - CALIBRATOR Warmup time Settling time Reference temperature Voltage/current stability Calibration currents Calibration voltages Frequency Uncertainty / 90 days Setup resolution (under Adjustment menu)

Minimum 30 minutes, connection to external power supply is obligatory Less than 10 seconds 23 °C ± 2 °C ±0.1% referred to Unom = 230 V 0.05 – 0.1 – 0.2 – 1 – 2 V 5-11-14-23-50-75-110-150-165-206-230-250-345-400-500 V 50 Hz / 60 Hz ± 0.06% 0.0001 V

TECHNICAL SPECIFICATION - SIMULATOR Fundamental RMS voltage output Output voltage AC Resolution Accuracy 50 ... 350 V 10 V ± 0.1 % Event RMS voltage output Output voltage AC Resolution Accuracy 0 ... 350 V 0.01 V ± 2% Fundamental RMS current Range Output voltage Overall current accuracy A 1033 (1 A ... 2000 A) 1 mV ... 1 V ±0.1 % Inrush RMS current output Inrush current Accuracy Crest factor Range 1: 2.0 mVRMS ... 200.0 mVRMS ± 0.5 % · URMS 1.5 Range 2: 20.0 mVRMS ... 2.0000 VRMS ± 0.5 % · URMS 1.5 Frequency Output range Resolution Accuracy 45 Hz ... 70 Hz 1 Hz ± 10 mHz Flickers Flicker type Measuring range Resolution Pst 0.5 ... 5.0 0.1 Voltage harmonics Measuring range Resolution Accuracy Uhn 1 % ... 100 % of fundamental output voltage 1% ± 5 % of Uhn Uhn: generated harmonic voltage n: harmonic component 2nd ... 50th Current harmonics and THD Measuring range Resolution Accuracy Ihn 1 % ... 100 % of fundamental current 1% ± 5 % of Ihn Ihn: measured harmonic current n: harmonic component 2th ... 50th Unbalance Unbalance range Resolution Accuracy u0.5 % ... 5.0 % 0.1 % u0 i0.0 % ... 20 % 0.1 % i0 Overdeviation and Underdeviation Measuring range Resolution Accuracy UOver 0 ... 50 % UNom 0.001 % UUnder 0 ... 90 % UNom 0.001 % Event duration and recorder time-stamp and uncertainty Measuring Range Resolution Error Event Duration 10 ms ... 7 days 1 ms Event Duration (Signaling) 1 s ... 100 s 100 ms Record and Event Time stamp N/A 1 ms General Measuring category CAT I / 300 V Dimensions 230 x 140 x 80 mm Weight (with batteries) 1,36 kg Display Colour 4.3 TFT liquid crystal display (LCD) with backlight, 480 x 272 dots. Batteries 6 x 1.2 V NiMH rechargeable batteries type HR 6 (AA) Working temperature range 0 °C ... +40 °C

CS 2890 • Instrument Power Calibrator/Simulator • Voltage measurement lead, (brown, black, grey, green, blue), 5 pcs • Special power supply cable for voltage offset measurement • Current measurement leads, 4pcs • Labels for colour coding • Power supply adapter • 1.2 V NiMH rechargeable battery, 6 pcs

• • • •

± 0.15 % ±1%

± 0.15 % ± 0.15 % ± 1 cycle ± 1 cycle

Soft carrying bag USB cable Instruction manual Calibration certificate

Measuring and Regulation Equipment Manufacturer

Picture of CS 2890 set

STANDARD SET

Accuracy* ±1%

Accessories 4.22

4. 21

Selection Guide for PQA Accessories MI 2885

MI 2883/84

A 1501

1-phase mini flexible current clamp 3000/300/30 A / 1V

Single phase smart flexible current clamp with three selectable measuring ranges (Sensor length: 25 cm; max. conductor size: 70 mm). Does not require external power supply as it is powered by the measuring instrument.

•

A 1502

1-phase mini flexible current clamp 3000/300/30 A / 1V

Single phase smart flexible current clamp with three selectable measuring ranges (Sensor length: 48 cm; max. conductor size: 140 mm). Does not require external power supply as it is powered by the measuring instrument.

•

1-phase mini flexible current clamp 3000/300/30 A / 1V

Single phase smart flexible current clamp with three selectable measuring ranges (Sensor length: 175 cm; max. conductor size: 540 mm). Does not require external power supply as it is powered by the measuring instrument.

•

A 1503

1-phase mini flexible current clamp 6000/600/60 A / 1V

Single phase smart flexible current clamp with three selectable measuring ranges (Sensor length: 90 cm; max. conductor size: 270 mm). Does not require external power supply as it is powered by the measuring instrument.

•

A 1227

1-phase flexible current clamp 3000/300/30 A/1V

•

A 1227 5M

1-phase flexible current clamp 3000/300/30 A / 1 V with cable length of 5 meters

Single phase smart flexible current clamp with three selectable measuring ranges Sensor length: 48 cm; max. conductor size: 140 mm, cable length: 5 meters. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

A 1445

1-phase flexible current clamp 3000/300/30 A / 1 V

Single phase smart flexible current clamp with three selectable measuring ranges Sensor length: 61 cm; max. conductor size: 190 mm. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

A 1446

1-phase flexible current clamp 6000/600/60 A / 1 V

Single phase smart flexible current clamp with three selectable measuring ranges Sensor length: 90 cm; max. conductor size: 270 mm. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

A 1582

1-phase flexible current clamp 3000/300/30 A / 1 V; High temperature

Single phase, high temperature (sensor: -20 to 200 ºC, module: -20 to 70 ºC) smart flexible current clamp with three selectable measuring ranges. Sensor length: 61 cm; max. conductor size: 190 mm. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

A 1281

Current clamp 0,5/5/100/1000 A /1V

•

A 1588

Current clamp 0.5/5/50 A

High smart accuracy current clamp 0.5/5/50 A, Jaw opening: 40 mm; Max. conductor size < 50 mm for precise current and power measurements including leakage current measurement

•

A 1609

•

Target application

MI 2892

Part numberDescription

MI 2893

Photo

Option

4. 22

Accessories 4.22

•

MI 2892

MI 2883/84

Target application

MI 2885

Part numberDescription

MI 2893

Photo

A 1069

Mini current clamp 100 A / 1 V

Mini current clamp 100 A / 1 V with jaw opening: 13 mm; jaw cross-section: 15 x 17 mm for power measurements. Requires A 1561 connection cable.

•

A 1398 PQA

Current clamp 10A / 1V

Highly accurate iron current clamp for current (including leakage current) and power measurements with smart clamp technology (automatic recognition by the analyser), powered by the connected PQA, and designed for measuring alternating currents in low-power installations (up to 20 A).

•

A 1391 PQA Current clamp AC/DC 40/300 A / 1 V

AC + DC current clamp 40/300 A / 1 V with jaw opening: 2.5 cm cm; Max. conductor size < 50 mm for power measurements. Battery Life, 66 hours typical (Alkaline).

•

A 1636

Current clamp AC/DC 1500 A

AC/DC current clamp 1500 A, with Jaw opening: 7,3 cm; Max. conductor size < 68 mm for power measurements (photo voltaic) Battery operated (9V)

•

A 1717

Current clamp AC/DC 100/1000 A / 1 V

AC/DC current clamp 100/1000A / 1V with jaw opening 51mm, max. conductor size 52 mm for power measurements (photo voltaic). Battery operated 9V, battery life with 500 mAh approx. 75 hours, 1200mAh approx. 6 1/2 days. Requires A 1561 connection cable.

•

A 1037

Current transformer 5A/1V

3-phase transformer for power measurements on distribution panels with 5 A nominal output current.

•

S 2086

4 x Mini current clamp A 1069, 100 A / 1 V

Set of four A 1069 current clamps for power measurements, including A 1561 connection cables.

•

S 2089

3 x Mini current clamp A 1069, 100 A / 1 V

Set of three A 1069 current clamps for power measurements, including A 1561 connection cables.

•

S 2087

1 x Mini current clamp A 1069, 100 A / 1 V

Set of one A 1069 current clamp for power measurements, including A 1561 connection cable.

•

S 2094

4 pcs A 1501, 1-phase flexible current clamp 3000/300/30 A / 1 V

Set of 4 - single phase flexible current clamp with three selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

S 2095

3 pcs A 1501, 1-phase flexible current clamp 3000/300/30 A / 1 V

Set of 3 - single phase flexible current clamp with three selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

Option

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

4. 23

•

MI 2885

MI 2883/84

Target application

MI 2892

Part numberDescription

MI 2893

Photo

S 2096

4 pcs A 1502, 1-phase flexible current clamp 3000/300/30 A / 1 V

•

S 2097

3 pcs A 1502, 1-phase flexible current clamp 3000/300/30 A / 1 V

•

S 2098

4 pcs A 1503, 1-phase flexible current clamp 6000/600/60 A / 1 V

•

S 2099

3 pcs A 1503, 1-phase flexible current clamp 6000/600/60 A / 1 V

•

S 2091

3 pcs A 1582, 1-phase, high temperature flexible current clamp 3000/300/30 A / 1 V

Set of 3 - single phase, high temperature flexible current clamp with three selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the measuring instrument.

•

S 2043

3 pcs A 1227, 1-phase flexible current clamp 3000/300/30 A / 1 V

•

S 2043 5M 3 pcs A 1227 5M, 1-phase flexible current clamp 3000/300/30 A / 1 V with 5 meters connection cable

•

S 2059

3 pcs A 1445, 1-phase flexible current clamp 3000/300/30 A / 1 V

•

S 2060

3 pcs A 1446, 1-phase flexible current clamp 6000/600/60 A / 1 V

•

S 2124

DC current clamp with cable adapter

100A / 1000A DC current clamp with adapter A 1561

•

S 2049

3 pcs A 1281, Current clamp 0,5/5/100/1000 A/ 1 V

Set of 3 - current clamps with four selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the instrument.

•

Option

4. 24

Accessories 4.22

MI 2892

MI 2883/84

Target application

MI 2885

Part numberDescription

MI 2893

Photo

S 2051

4 pcs A 1281, Current clamp 0,5/5/100/1000 A/ 1 V

Set of 4 - current clamps with four selectable measuring smart ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the instrument.

•

S 2107

3 pcs A 1588 Current clamp 0.5/5/50 A / 1 V

Set of 3 - current clamps with three selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the instrument.

•

S 2106

4 pcs A 1588 Current clamp 0.5/5/50 A / 1 V

Set of 4 - current clamps with three selectable measuring ranges. Current clamp is automatically recognized by the instrument. Clamp does not require external power supply as it is powered by the instrument.

•

A 1561

Connection cable for current clamp

Connection cable for connecting current clamps A 1069 and A 1717, on Metrel power quality analysers.

•

A 1354

Temperature probe

Temperature probe can be used for monitoring and recording of temperature trend at measuring objects, such as capacitors, motors, transformers, etc.

•

A 1648

Current clamp extension cable, 5 m

Extension cable for current clamps

A 1479

Wide range power supply

Wide range power supply (Unom: 85V ÷ 650 Vac / 920 Vdc ) provide power supply for PQ device and modem directly from voltage measuring terminals. Applicable when standard electrical sockets are not available on measurement site.

•

A 1778

Magnetic contact probe

The A 1778 magnetic probe (with a Ø6.6 mm right-angle magnetic adapter and a Ø4 mm socket) is designed for semi-temporary measurement of voltage on steel screw terminal blocks.

•

A 1355

GPS receiver

GPS Synchronization unit for ensuring exact date & time, which guaranties that the time clock uncertainty of the Metrel power quality analyzers does not exceed ±10 ms for 50 Hz signals, according to IEC 61000-4-30.

•

A 1750

GPS Cable extension

Cable extension for A 1355 GPS receiver, 10 m.

•

A 1753

4G modem

4G modem for remote instrument access.

•

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

Option

4. 25

Photo-scanning head

Optically sensitive device, which reads the blinking of a LED on electronic electricity meters as well as color marks on the disc of induction electricity meters. It is intended for accuracy measurement (active/reactive energy) of electronic and mechanical electricity meters.

A 1631

EV monitoring cable

A special accessory designed for current, voltage and CP signal, monitoring during Electric Vehicle (EV) charging process.

Test probe, brown

Test probe with fi 4 mm connection is suitable for performing measurements both in mains outlets and in situations when no schuko outlet is not present.

MI 2883/84

•

A 1014

Test probe, black

•

A 1453

Test probe, grey

•

A 1015

Test probe, blue

•

A 1062

Test probe, green

•

A 1016

Test probe, red

•

A 1297

Crocodile clip, brown

•

A 1013

Crocodile clip, black

•

A 1547

Crocodile clip, grey

•

A 1310

Crocodile clip, blue

•

A 1309

Crocodile clip, green

•

A 1064

Crocodile clip, red

•

S 2014

Safety fuse adapter, 3 pcs

Fuse adapters protect the instrument and the user against current strike and overload.

•

S 2015

Safety flat clamp, 4 pcs

Safety flat clamps assure good contact when connecting the test leads on busbars and other larger flat surfaces.

•

A 1458

microSD card reader

Move data between your computer and memory card with memory card reader.

•

Micro SD card 32GB

32GB memory card to store large amount of data

•

USB storage device (for backup of data)

USB stick enables you to backup your data to a USB drive. This is a practical backup solution as it allows you to store recorded data files to external device, offering increased portability.

•

A 1673

S 2072

Crocodile clip assures secure and permanent contact during the measurement on bus bars, fixing screws, etc.

Option

4. 26

MI 2885

A 1756

A 1298

•

Target application

MI 2892

Part numberDescription

MI 2893

Photo

Accessories 4.22

•

MI 2883/84

•

A 1459

Set of measuring leads, 5 x 2m

A 1459 5M

Set of measuring leads, 5 x 5m

A 1512

Set of measuring leads, 4 x 2m

High quality measuring leads for use up to CAT III / 1000 V.

A 1577

Professional protective waterproof case with a telescopic handle and smoothrunning wheels

Professional protective waterproof carrying case with telescopic handle and smooth-running wheels, made from high-impact plastic intended for easiest transportation to testing place. Huge volume enables storage of all needed accessories. It also has an automatic pressure equalization valve to insure easy opening after altitude or temperature changes.

•

A 1685

Professional protective waterproof case

Professional protective waterproof carrying case, made from high-impact plastic. It also has an automatic pressure equalization valve to insure easy opening after altitude or temperature changes. Tough, yet lightweight, and entirely waterproof, this hard protective carrying case offer premium protection of Power Quality instruments.

•

A 1565

Waterproof case for outdoor application and recordings (pylons, switchyards)

Waterproof, portable case, rated as an IP 65, for outdoor application of PQ instruments. This portable lockable case is intended to be used in combination with PQA instruments. It is designed to be used with wide range power supply A 1479, 3G/WiFi-Router A 1622 and a GPS receiver A 1355. The case includes standard voltage measurement cables for all voltage connections and 4 current clamps, A 1227.

•

A 1006

Soft carrying bag

Large soft carrying bag for transport and storage of test instrument and belonging accessories.

•

A 1020

Small soft carrying bag

Small soft carrying bag for transport and storage of test instrument or accessories.

•

S 2125

A 1160

1,2 V, 2400 mAh AA rechargeable NiMH batteries type AA, 6 pcs

Fast charger for 8 AA batteries with a set of 6 NiMH bat., type AA

High quality measuring leads for use up to CAT III / 1000 V.

MI 2892

Target application

MI 2885

Part numberDescription

MI 2893

Photo

A set of 6 pieces of rechargeable batteries type AA.

Fast battery charger for up to 8 pieces of AA rechargeable batteries, and a set of 6 pcs NiMH rechargeable batteries, type AA.

Measuring and Regulation Equipment Manufacturer

Accessories 4.22

•

4. 27

4. 28

Accessories 4.22

Content Equipment for laboratories and Schools

DEMONSTRATION BOARDS MI 3399 Electrical Safety and Quality Application Trainer MI 3298 P1 Earth/Ground trainer module MI 3298 T Transformer/Insulation trainer module MI 3088 PV Demonstration Board MA 2067 Demonstration Board MI 3099 Demonstration Board MI 2166 Demonstration Board MI 3300 Portable Appliance Simulation Board MI 3299 HV demo BOX MI 2891 Power Simulator

Measuring and Regulation Equipment Manufacturer

1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

Equipment for laboratories and Schools

Electrical Installation Safety High Voltage Insulation / Continuity / Earth / Transformer Appliance / Machine / Switchboard Safety Power Quality Analysis EQUIPMENT FOR LABORATORIES AND SCHOOLS Multimeters / Clamp meters / Voltage testers / Thermal cameras Software

5.02 5.04 5.06 5.08 5.09 5.10 5.11 5.12 5.13 5.14

5. 1

Equipment for laboratories and Schools

Demonstration boards MI 3399 Electrical Safety & Quality Application Trainer The MI 3399 Electrical Safety & Quality Application Trainer is a 3D simulator of real-life safety and quality situation’s with many adjustable risks and errors. The model is designed as a stand-alone unit for demonstrations, trainings and educational purposes. The MI 3399 is ideally suited for training and education of larger groups of people as well as for independent practice. Due to various integrated electrical elements the model enables complete testing and troubleshooting of power quality analysis as well as LV electrical installations, lightning systems, earthing systems, PV systems, appliances, equipment, machines or switchboards by using modern methods, testing procedures and instruments.

KEY FEATURES • • • • • • • • • • • • • • • •

Insulation resistance; Continuity of PE conductors; Line impedance; Loop impedance; RCD testing (Contact voltage, trip-out tome, trip-out current, Autotest); IMD, ELM, RCM leakage and insulation monitors adjustment and test; Earth resistance (4-wire, 3-wire, 2-wire, two current clamps); Specific earth resistance; Lightning protection loops and legs resistance; Surge protector test; Leakage current; Phase rotation; Voltage; Frequency; AUTO SEQUENCE ® procedure for TN, TT or IT earthing system; Power quality.

More than 65 different measurements and testing methods could be demonstrated all in accordance to IEC 61557 and IEC 60364-6. The most significant elements are integrated: RCDs of different types, Fuses, PE equalization bars, 1-phase and 3-phase sockets, various grounding systems (TT,

5. 2

TN, IT), Surge protector, IMD insulation monitor and more.

APPLICATION • Trainings and seminars for gaining theoretical knowledge and for performing practical exercises; • For conducting exams when upgrading the professional’s competence level; • Educational and practical training of electrical contractors about safety procedures, measuring methods and knowledge; • Demonstration on how to use different measurement instruments and testers.

MODULES AND COURSES • LV Electrical Installation Safety Trainer Module; • TN / TT / IT Earthing Systems Trainer Module; • Lightning Protection Trainer, Surge Protection Trainer Module; • Special Installations and Locations Safety Trainer Module; • Vehicles and Mobile Units Safety Trainer Module.

Additionally there are several optional modules available: • Power and Voltage Quality Trainer Module; • Appliances and Machines Safety Trainer Module; • Photovoltaic Systems Trainer Module. All modules are supported with Handbooks, Posters, Charts, Presentations, Exercises, Catalogue of Knowledge and Catalogue of Exams. Approved certificates may be issued when localizing modules to meet the required country's regulation. More than 30 different errors can be simulated all of which enable the trainee to practice analysis and troubleshooting procedures.

STANDARDS Functionality • IEC 61557 Safety • IEC 60364-6

MI 3399 APPLICATION TRAINER SET MODULES AD1 MI 3399 – EIS ELECTRICAL INSTALLATION SAFETY TRAINER Module includes the following equipment: • MI 3155 ST EurotestXD - Multifunctional installation tester • MI 3110 EurotestIM - Special installation tester • MI 3242 MicroOhm 2A - Earth bonding 4-wire • MI 3121H Smartec 2,5 kV - HV Insulation analyser • MI 3123 Smartec - Earth/Clamp tester • MD 9272 Leakage clamp TRMS with Power & Harmonics • A 1018 Current clamp (low range, leakage) • A 1019 Current clamp • S 2009 Test lead set, 2 m, 4 pcs • 25 pcs Electrical Inspector’s guide • 25 pcs Chart: Verification on Low-voltage electrical installations • Poster: Verification on Low-voltage electrical installations • Poster: Medical sites • Poster: Firebrigades AD2 MI 3399 – PQA POWER AND VOLTAGE QUALITY TRAINER Module includes the following equipment: • MI·2892 Power Master - Power Quality Analyser Includes also: • Quick guide: Power Quality Analysing and troubleshooting procedures AD3 MI 3399 – GT APPLIANCES & MACHINES SAFETY TRAINER Module includes the following equipment: • MI 3309 BT DeltaGT • A 1488 BT Able printer (with battery charger and one role of labels) • 25 pcs Chart: Machines & switchboards safety & quality testing • 25 pcs Chart: Portable appliances and electri-cal equipment testing • Poster: Portable appliances and electrical equipment testing AD4 MI 3399 – PV PHOTOVOLTAIC SYSTEMS TRAINER Module includes the following equipment: • MI 3109 PS EurotestPV Pro Set Includes also: • A 1378 EurotestPV Remote • A 1391 AC/DC Current clamp • A 1427 PV Reference cell • A 1400 PV Temperature probe • A 1384 PV Safety probe

Measuring and Regulation Equipment Manufacturer

5. 3

Equipment for laboratories and Schools

Demonstration boards MI 3298 P1 Earth/Ground trainer module MI 3298 P1 Earth/Ground trainer module is designed as a stand-alone module for training different earth measuring methods. Due to the puzzle concept, other MI 3298 P1 Earth/Ground trainer modules and/ or MI 3298 T Transformer/Insulation trainer modules can be joined together to simulate a complete transmission line .with a switchyard at the end. The module also offers simulation of different errors and object states through the use of a selectable switch and ground wire.

KEY FEATURES

MODULES AND COURSES

• • • • •

• Earth/ground network impedance analysis; • Power generator, transformer and coils; • Insulating material analysis.

Ground networks impedance; Earth surface potentials; Fault simulated step & contact voltage; Pylon (selective legs); HF earth impedance.

Different modules can be evaluated separately as an independent system and / or connected together to demonstrate the interconnectivity problems and influences between them. This approach could give trained personnel clear information about testing methods, measured values and results on known systems and an overview of situations where systems become more complex when connected together.

APPLICATION • Trainings and seminars for gaining theoretical knowledge and demonstrating/performing practical exercises; • Conducting exams when upgrading the examined professional’s competence level; • Education and practical training of electrical contractors about safety procedures, measuring methods and general knowledge; • Demonstration on how to use different measurement instruments and testers. 5. 4

All modules are supported with handbooks, posters, charts, presentations, exercises, catalogue of knowledge and catalogue of exams. Approved certificates may be issued when localizing modules to meet the required country's regulation. Both training modules offer simple error simulation, thus enabling trainees to practice troubleshooting procedures. MI 3298 P1 is compatible with: • MI 3295 Step Contact Voltage Measuring System • MI 3205 TeraOhmXA 5kV • MI 3280 Digital Transformer Analyser • MI 3250 MicroOhm 10A • MI 3290 GX 1 Earth Analyser

STANDARDS Functionality • IEC 61557-5 • IEEE Std 81-2012 Safety • IEC 61010-1:2010

Different measuring procedures and methods can be demonstrated/trained on the MI 3298 P1 Earth/Ground trainer module: • 3-pole measurin method; • 4-pole measurin method; • S-flex measuring method by using one or more flex clamps; • HF measuring method; • Impulse measuring method; • GPR measurement; • Step and contact voltage measurement; • Pylon ground wire (PGW) test. Different measuring procedures can be demonstrated/trained under various simulated errors and types of objects: • Simulation of broken connection pylon foot resistance; • Pylon grounding ring simulation for GPR measurements; • Simulation of a ground wire connection; • Simulation of different earthing types.

The MI 3298 Power Network Application Trainer (MI 3298 P1 and MI 3298 T) based on “puzzle” concept for simulation and training of different measurement situations on the high voltage field. It could be used as stand-alone training module or any numbers of training modules connected together. Training modules are designed for demonstrations, trainings and educational purposes. The “puzzle” concept is ideally suited for training and education of larger groups of people as well as for independent practice. Due to various integrated electrical elements the module enables complete testing, troubleshooting and practice on earth, insulation measurements as well as power transformer measurements.

Picture of MI 3298 P1 set

STANDARD SET MI 3298 P1 Training module includes: • MI 3298 P1 Earth/Ground trainer module, code 20 919 237 • Step voltage probe, code 20 052 009, 2 pcs • Pylon, code 20 052 006 • Ground wire connection, code 20 692 042 • Puzzle interconnection part, code 20 052 010 • Set of measuring cables • Flex current clamps A 1612 (fi 14 cm), code 20 051 222 • Optional: Flex current clamps A 1612 (fi 14 cm), code 20 051 222, 3 pcs

Picture of AD1 MI 3298 set

AD1 MI 3298 – Earth/Transformer/Insulation Resistance Trainer Module includes the following equipment: • MI 3298 P1 Earth/Ground trainer module • MI 3298 T Transformer/Insulation trainer module • MI 3295 Step Contact Voltage Measuring System • MI 3205 TeraOhmXA 5kV • MI 3280 Digital Transformer Analyser • MI 3290 GX 1 Earth Analyser

Picture of AD2 MI 3298 set

AD2 MI 3298 – Earth/Transformer/Insulation Resistance Trainer Module includes the following equipment: • MI 3298 P1 Earth/Ground trainer module • MI 3298 T Transformer/Insulation trainer module • MI 3295 Step Contact Voltage Measuring System • MI 3205 TeraOhmXA 5kV • MI 3280 Digital Transformer Analyser • MI 3290 GX 1 Earth Analyser

Picture of AD3 MI 3298 set

AD3 MI 3298 – Earth Trainer Module includes the following equipment: • MI 3298 P1 Earth/Ground trainer module • MI 3295 Step Contact Voltage Measuring System • MI 3290 GX 1 Earth Analyser

Measuring and Regulation Equipment Manufacturer

5. 5

Equipment for laboratories and Schools

Demonstration boards MI 3298 T Transformer/Insulation trainer module The MI 3298 T Transformer/ Insulation trainer module is designed as a stand-alone module for training of different insulation measuring methods as well as basic .measuring procedures on voltage transformers. Due to the puzzle concept, other MI 3298 P1 Earth/Ground trainer modules and/or MI 3298 T Transformer/Insulation trainer modules can be joined together to simulate a complete transmission line with a switchyard at the end. It is possible to simulate different types of errors on the transformer.

KEY FEATURES

APPLICATION

• Cable impedance, resistance and insulation; • HV insulation resistance; • Transformer impedance measurement; • Winding resistance measurement; • Transformer turn ration analysis.

• Trainings and seminars for gaining theoretical knowledge and demonstrating/performing practical exercises; • Conducting exams when upgrading the examined professional’s competence level; • Education and practical training of electrical contractors about safety procedures, measuring methods and general knowledge; • Demonstration on how to use different measurement instruments and testers.

Different measuring procedures and methods can be demonstrated/trained on the MI 3298 T Transformer/Insulation trainer module: Insulation measurements: • Insulation resistance test (spot test); • Diagnostic tests (DAR, PI, DD); • Step voltage test. Transformer analysis: • Transformer turn ratio measurement; • Winding resistance measurement. Different measuring procedures can be demonstrated/trained under various simulated errors: • Broken windings; • Short-circuit faults on windings.

5. 6

MODULES AND COURSES • Earth/ground network impedance analysis; • Power generator, transformer and coils; • Insulating material analysis. All modules are supported with handbooks, posters, charts, presentations, exercises, catalogue of knowledge and catalogue of exams. Approved certificates may be issued when localizing modules to meet the required country's regulation.

Both training modules offer simple error simulation, thus enabling trainees to practice troubleshooting procedures. MI 3298 P1 is compatible with: • MI 3295 Step Contact Voltage Measuring System • MI 3205 TeraOhmXA 5kV • MI 3280 Digital Transformer Analyser • MI 3250 MicroOhm 10A • MI 3290 GX 1 Earth Analyser

STANDARDS Functionality • IEC 61557-5 • IEEE Std 81-2012 Safety • IEC 61010-1:2010

Picture of MI 3298 P1 set

STANDARD SET MI 3298 T Training module includes • MI 3298 T Transformer/Insulation trainer module, code 20 919 238 • Puzzle interconnection part, code 20 052 010

Picture of AD1 MI 3298 set

Picture of AD2 MI 3298 set

Picture of AD4 MI 3298 set

AD4 MI 3298 – Transformer/Insulation Resistance Trainer Module includes the following equipment: • MI 3298 T Transformer/Insulation trainer module • MI 3205 TeraOhmXA5 kV • MI 3280 Digital Transformer Analyser

Measuring and Regulation Equipment Manufacturer

5. 7

Equipment for laboratories and Schools

Demonstration boards MI 3088 PV Demonstration Board Demonstration board MI 3088 simulates typical photovoltaic (PV) system with one PV module and DC/ AC inverter. It represents a typical installation that consist of PV string, DC switch box, DC/AC inverter and one phase connection to the power grid. It is intended for use preferably by sales personnel for demonstration of the measuring methods and procedures on DC and partially on AC side of a PV system.

APPLICATION

• With this demo board all electrical tests according to EN 625446 can be demonstrated: continuity, isolation, open circuit voltage Uoc, short circuit current Isc and polarity. • It simulates an I/V characteristic of a PV module/string. • Simulated output of the irradiance and temperature sensor. • Simulation of a DC/AC inverter with one DC input and single phase output.

• Presentation of testing of a PV system; • Demonstration of PV test equipment by sales personnel.

STANDARDS Functionality • EN 62446 Electromagnetic compatibility • IEC/EN 61326 Safety • EN 61010 -1

TECHNICAL DATA Power supply Overvoltage category Dimensions Weight

5. 8

115 V/ 230 V, 50 Hz / 60 Hz CAT II / 300 V 450 × 330 × 110 mm 4.47 kg

STANDARD SET MI 3088 • Demonstration board • Mains cable • PS2 male / male adapter • Test lead 1.5 m, black • Test lead 1.5 m, red • User manual

Picture of MI 3088 set

KEY FEATURES

Equipment for laboratories and Schools

Demonstration boards MA 2067 Demonstration Board Demonstration Board MA 2067 is an excellent demonstration and educational tool that simulates real conditions in low voltage electrical installations. The Demonstration board consists of all significant elements of electrical installations like RCDs of different types, fuses, PE equalization bars, 1-phase and 3-phase sockets, various consumers of electrical energy and various grounding systems (TT, TN, IT). The MA 2067 Demonstration Board provides simulation of different types of faults in electro installation. Complete testing and troubleshooting of the installation is possible by using suitable instruments.

KEY FEATURES

APPLICATION

• 65 different measurements in accordance to EN 61557 are possible (insulation resistance, continuity of PE conductors, earth resistance, specific earth resistance, line and loop impedance, phase rotation, leakage current, RCD testing, voltage and frequency). • 19 different errors can be selected on a lockable distributor. • Different types of RCD are integrated for measurement of trip-out time, trip- out current and contact voltage • Simulation of TT, TN and IT earth systems. • Possibility of connection to single phase or 3-phase supply system. • Booklet with theory and exercises for schools and training centres is included in a standard set.

• Education of students of electro technical specialities; • Education and practical training of electrical contractors about measurements on low voltage electro installations; • Demonstration on how to use different measurement instruments by sales personnel.

STANDARD SET MA 2067 • Demonstration board • Jumper, 4 pcs • Board support for vertical use • Three phase to one phase adapter • 1-phase mains cable • Instruction manual • Booklet with exercises • Calibration certificate

STANDARDS

Picture of MA 2067 set

Electromagnetic compatibility • IEC/EN 61326 Safety • IEC/EN 61010 -1;

TECHNICAL DATA Power supply Dimensions Weight

230 V / 400 V, 50 Hz 680 x 450 mm (w x h) 12.5 kg

Measuring and Regulation Equipment Manufacturer

5. 9

Equipment for laboratories and Schools

Demonstration boards MI 3099 Demonstration Board Demonstration board MI 3099 simulates typical electrical installation usually met in individual houses or apartments with important elements on switchboard and on circuit site. Demonstration board is intended for use preferably by sales personnel when demonstrating operation of electrical installation test equipment, especially the new Metrel’s electrically installations safety testers with built-in AUTOSEQUENCE procedure.

KEY FEATURES

APPLICATION

STANDARD SET

• The board contains real elements of electrical installation like RCD, mains switch, automatic fuses, switches, lamps, 1-phase and 3-phase mains test outlet, N and PE collector. • All standardised testing methods can be presented. • TN or TT system with or without RCD can be simulated. • Possibility of connection to single phase or 3-phase supply system. • Various Autosequence test procedures are supported for demonstration of testing safety by new EurotestAT and EurotestXA. • Demonstration board is put in the strong rugged case with a handle for comfortable carrying.

• Presentation of complete testing of any electrical installation; • Demonstration of electrical installation test equipment operation by sales personnel.

MI 3099 • Demonstration board • Jumper • Special probe, 3 pcs • Mains cable • Three phase to one phase adapter • Instruction manual • Calibration certificate

Functionality • EN 62446 Electromagnetic compatibility • IEC/EN 61326 Safety • EN 61010 -1

TECHNICAL DATA Power supply Overvoltage category Dimensions Weight

5. 10

230 V / 400 V, 50 Hz CAT II / 300 V 480 × 387 × 136 mm 5 kg

Picture of MI 3099 set

STANDARDS

Equipment for laboratories and Schools

Demonstration boards MI 2166 Demonstration Board Demonstration board MI 2166 simulates common electrical installation usually met in individual house or apartment. Demonstration board is to be used preferably by sales personnel when demonstrating operation of electrical installation test equipment. Various test methods supported by different test instruments can be presented. MI 2166 is compatible with all Metrel’s Installation Safety Testers.

KEY FEATURES

APPLICATION

• A number of different measurements in accordance to EN 61557 are possible (insulation resistance, continuity of PE conductors, earth resistance (four-lead and two clamp methods), specific earth resistance, line and loop impedance, phase rotation, load current, RCD testing, contact voltage, etc.). • Real elements of electrical installation are placed on the front panel like RCD, ON/OFF switch with lamp, mains test outlet and connection terminals. • All standardised testing methods can be presented. • 5 different errors can be pre-set by »fault« switches. • TN or TT system can be simulated. • Demonstration board is put in the strong rugged case with a handle for comfortable carrying.

• Presentation of complete testing of any electrical installation; • Demonstration of electrical installation test equipment operation by sales personnel.

STANDARD SET MI 2166 • Demonstration board • Jumper, 2 pcs • Mains cable • Instruction manual • Calibration certificate

STANDARDS

Picture of MI 2166 set

Electromagnetic compatibility • IEC/EN 61326 Safety • IEC/EN 61010 -1;

TECHNICAL DATA Power supply Dimensions Weight

230 V, 50 Hz 450 × 330 × 110 mm 3.56 kg

Measuring and Regulation Equipment Manufacturer

5. 11

Equipment for laboratories and Schools

Demonstration boards MI 3300 Portable Appliance Simulation Board The MI 3300 GT Demoboard is an excellent instrument for teaching or demonstrating GT testing. The MI 3300 simulates a wide variety of portable equipment in normal operation or in fault conditions with the simple flick of a switch. The strong rugged portable case with detachable lid allows the unit to be easily moved between sites. The ability of the unit to simulate unlimited number of different equipment and the possibility to set fault conditions make the GT Demoboard the ideal unit for teaching or assessing learning in classrooms, training sessions, demonstration sessions, seminars and on GT training courses.

• Practically unlimited number of different equipment (portable appliances, machines and switchgears) can be simulated by using different tables (eight are included in a standard set). • On demand the demonstration board can be simply upgraded with new tables. • Normal and fault situations can be switched on and off, offering fault conditions for the assessment of learning. • Demoboard simulates the following faults: PE continuity faults, insulation

resistance faults, leakage and touch leakage faults, polarity and functional faults. • The demonstration board is built into a strong rugged case with a handle and detachable lid for storing leads, adapters and manuals.

APPLICATION • Presentation of complete safety testing of any portable appliance, machine or switchgear; • Demonstration of PAT test equipment operation by sales personnel.

TECHNICAL DATA Protection class

Nominal input voltage

230 V

Optional on request

115 V

Power consumption

15 VA max.

Overvoltage category

CAT II / 300 V

Frequency range

45 Hz … 66 Hz

Pollution degree

Dimensions

345 x 160 x 335 mm

Weight

2.76 kg

5. 12

STANDARDS Safety • EN 61010-1 STANDARD SET MI 3300 • Instrument GT Demoboard • 8 demonstration tables (iron, receiver, IEC cord, extension drum, coffee machine, washing machine, switchgear) • Jumper • IEC cord • Mains cable • Class I mains cable • Class II mains cable • Test cable for discharge time testing • Carrying bag for demonstration tables • Handbook “Electrical Equipment Testing” on storage media • Instruction manual • Calibration certificate

Picture of MI 3300 set

KEY FEATURES

Equipment for laboratories and Schools

Demonstration boards MI 3299 HV demo BOX The MI 3299 High voltage Demonstration Box 10 kV has been developed for demonstration purposes at high voltage insulation diagnostics. It simulates typical electrical insulation usually met in the industrial environment. It is equipped with high quality resistors in different ranges, high voltage capacitors and a discharge facility to simulate a breakdown phenomenon in gases. Additionally measurements of polarization index (PI), dielectric discharge (DD) and dielectric absorption ratio (DAR) can be demonstrated. Packed with all these features the demonstration box is also well suited for basic calibration of DC high voltage insulation resistance measuring instruments.

KEY FEATURES

APPLICATION

• 10 kV rated resistors with very low voltage coefficient. • Resistive decade with 200 kΩ, 500 MΩ, 200 GΩ and 2 TΩ resistors. • HV capacitors in 2.5 μF and 5 nF range. • Built-in spark gap and gas discharge tube. • Demonstration of insulation breakdown in gases is possible. • Two models of insulation material (good and bad cables) enable the demonstration of real insulation behaviour under high DC voltage. • Demonstration box is put in the strong rugged case with handle for comfortable carrying.

• Demonstration of insulation diagnostics measurement with DC test voltage; • Demonstration of functionality of HV insulation measuring instruments; • Training centres, schools, laboratories; • Basic calibration of DC high voltage insulation testers.

STANDARD SET MI 3299 • HV demo BOX 10 kV • HV test leads, 2 pcs • Instruction manual • Handbook on storage media • Calibration certificate

STANDARDS

Picture of MI 3299 set

Safety • EN 61010 -1

TECHNICAL DATA Dimensions Weight

440 × 320 × 110 mm 4 kg

Measuring and Regulation Equipment Manufacturer

5. 13

Equipment for laboratories and Schools

Demonstration Boards MI 2891 Power Simulator The MI 2891 Power Simulator is a multi-purpose three phase power simulator for simulating typical situations in low voltage power supply systems. It is an excellent tool for training, demonstration purposes, or as an electrical didactic tool. The simulator has some pre-programmed scenarios, and also the option of a complete manual mode. The user can decide between different load character adjustments, adjustable current and voltage level with a simulation of varios different faulty conditions

SIMULATING FUNCTIONS

KEY FEATURES

APPLICATION

• • • • • • • • • •

• Simple and powerful waveform generator with various settings. • 4 voltage channels with wide simulation range: up to 350 Vrms. • 4 current channels with current clamps simulation up to 2 kA. • Simultaneous voltage and current (8 channels) simulation, 16 bit DA conversion for accurate signal generation, • Dip, swell, interrupt, signalling, transient and inrush events simulation. • Voltage and current harmonics waveform simulation. • Unbalanced voltage and current waveform simulation. • Square flicker simulation. • Various character load/character type combination simulation. • Thorough signal parameters settings. • Saving current system settings on power off. • 4.3’’ TFT colour display.

• Training purposes; • Demonstration of PQA testing equipment by sales personnel; • Education of students of electro technical specialities.

Voltage; Current; Frequency; Harmonics (U,I); Phase angle (U,I); Flicker; Load character; Network type (Load/Generator); Unbalance (U,I); Phase sequence (U,I).

5. 14

STANDARDS Safety: • EN 61010-1: 2010 Electromagnetic compatibility (EMC): • EN 61326-2-2: 2013

TECHNICAL DATA Fundamental RMS voltage output Output voltage AC 50 ... 300 V

Resolution 10V

Accuracy ± 0.1 %

Event RMS voltage output Output voltage AC 0 ... 350 V

Resolution 10V

Accuracy ± 0.1 %

Fundamental RMS current Range A 1033 (100 A ... 2000 A)

Output voltage 100 mV ... 1 V

Overall current accuracy ±0.1 %

Inrush RMS current output Inrush current Range 1: 2.0 mVRMS ... 200.0 mVRMS Range 2: 20.0 mVRMS ... 2.0000 VRMS

Accuracy ± 0.5 % · URMS ± 0.5 % · URMS

Crest factor 1.5 1.5

Frequency Output range 45 Hz ... 70 Hz

Resolution 1 Hz

Accuracy ± 10 mHz

Flickers Flicker type Pst

Measuring range 0.5 ... 5.0

Resolution 0.1

Voltage harmonics Measuring range UhN 1 % ... 100 % of fundamental output voltage UhN: N:

Resolution 1% generated harmonic voltage harmonic component 2nd ... 50th

Accuracy ± 5 % of UhN

Current harmonics and THD Measuring range IhN 1 % ... 100 % of fundamental current IhN: N:

Resolution 1% measured harmonic current harmonic component 2th ... 50th

Accuracy ± 5 % of IhN

Unbalance range 0.5 % ... 5.0 %

Resolution 0.1 %

Accuracy ± 0.15 %

u0 i-

0.0 % ... 20 %

0.1 %

±1%

Measuring range 0 ... 50 % UNom 0 ... 90 % UNom

Resolution 0.001 % 0.001 %

Accuracy ± 0.15 % ± 0.15 %

Resolution 1 ms 1 ms

Error ± 1 cycle ± 1 cycle

Unbalance

Accuracy* ±1%

UOver UUnder

Event duration and recorder time-stamp and uncertainty Measuring Range Event Duration 10 ms ... 7 days Record and Event Time stamp N/A General Measuring category Dimensions Weight (with batteries) Display Batteries Working temperature range

STANDARD SET MI 2891 • Instrument Power Simulator • Voltage measurement lead, (brown, black, grey, green, blue), 5 pcs • Current measurement leads, 4pcs

CAT I / 300 V 230 x 140 x 80 mm 1,34 kg Colour 4.3 TFT liquid crystal display (LCD) with backlight, 480 x 272 dots. 6 x 1.2 V NiMH rechargeable batteries type HR 6 (AA) -20 °C ... +40 °C

• • • • • •

Labels for color coding Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag USB cable Instruction manual

Measuring and Regulation Equipment Manufacturer

Picture of MI 2891 set

Overdeviation and Underdeviation

5. 15

Notes

5. 16

Content Multimeters / Clamp meters / Voltage testers / Thermal cameras 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

GOOD TO KNOW Multimeters / Clamp meters / Voltage testers / Thermal cameras

6.02

DIGITAL MULTIMETERS Selection Guide for Digital Multimeters MD 9070 Insulation/continuity Digital Multimeter MD 9060 TRMS, 100 kHz Voltage Bandwidth Heavy Duty Industrial Multimeter MD 9050 TRMS Heavy Duty Industrial Digital Multimeter MD 9040 TRMS Industrial Digital Multimeter MD 9030 TRMS General Purpose Digital Multimeter MD 9020 General Purpose Digital Multimeter MD 9016 Electrical Field Service Multimeter MD 9010 General Purpose Autocheck Digital Multimeter

6.04 6.06 6.08 6.09 6.10 6.12 6.13 6.14 6.15

CLAMP METERS Selection Guide for Clamp Meters MD 9272 Leakage Clamp TRMS Meter with Power Functions MD 9250 Industrial TRMS AC/DC CAT IV /1000 V MD 9240 TRMS Power Clamp Meter MD 9235 TRMS Power Clamp Meter, 3-Phase, Unbalanced-Load MD 9231 Industrial TRMS AC/DC Current Clamp Meter MD 9226 TRMS AC/DC Current Clamp Meter MD 9225 Most Complete Industrial TRMS AC/DC Current Clamp Meter MD 9210 Mini Clamp Meter

6.16 6.18 6.19 6.20 6.21 6.22 6.23 6.24 6.25

VOLTAGE AND CONTINUITY TESTERS Selection Guide for Voltage and Continuity Testers MD 1160 LED Voltage / Continuity Tester MD 1060 LCD Voltage / Continuity Tester

6.26 6.27 6.28

NON CONTACT VOLTAGE DETECTORS Selection Guide for Non Contact Voltage Detector MD 126 Non-contact voltage and phase rotation detector MD 116 Non Contact Voltage Detector MD 106 Non Contact Voltage Detector

6.29 6.31 6.32 6.33

THERMAL CAMERAS Selection Guide for Thermal cameras MD 9930 Thermal camera MD 9910 Thermal camera MD 9880 TRMS thermal multimeter

6.34 6.35 6.36 6.37

SELECTION GUIDE FOR DMM ACCESSORIES

6.38

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

Multimeters / Clamp meters / Voltage testers / Thermal cameras

Electrical Installation Safety High Voltage Insulation / Continuity / Earth / Transformer Appliance / Machine / Switchboard Safety Power Quality Analysis Equipment for laboratories and Schools MULTIMETERS / CLAMP METERS / VOLTAGE TESTERS / THERMAL CAMERAS Software

6. 1

Good to know Multimeters / Clamp meters / Voltage testers / Thermal cameras Find out more about DMMs, clamp meters and thermal cameras. Handheld digital multimeters (DMM) are among the most widely used instruments for equipment testing when it comes to servicing, repairing, and installing applications. A DMM is a digital meter that is capable of making various types of measurement. It may have any number of special features, but mainly a DMM measures volts, ohms, and amperes. DMMs are used to troubleshoot electrical problems in a wide array of industrial and household devices such as batteries, motor controls, appliances, power supplies, and wiring systems. Metrel DMMs are appropriate for testing under tough conditions and can be tossed into tool cases. When choosing a clamp meter not only look at specifications, but also pay attention to features, functions, and the overall value represented by a meter’s design: • Choose a clamp meter that gives accurate and repeatable results. • For precise measurements choose a clamp meter which reports TRMS reading. Otherwise noise from everything from a variable frequency drive to compact fluorescent bulbs can result in a less accurate reading. • Make sure that the clamp meter is specified to work in the environment you do and that are rugged enough to continue to give reliable results even in case they drop from ladders or bouncing in your tool case. • Be sure the clamp meter display has large, easy to read characters. RMS (Root Mean Square) value When an AC supply is placed onto a circuit, it produces heat. The RMS value is the equivalent DC supply that would produce the same amount of thermal heat as the actual AC supply. TRMS (True RMS) value TRMS is a specific method of measuring the RMS value of a signal. With inductive and capacitive systems distorting the sinusoidal wave of the mains supply, this method provides the most accurate RMS value regardless of the shape of the waveform.

Accuracy Accuracy is a value to show how accurately an instrument can read a specific value. This is usually written as a percentage (e.g. 5 V ± 5 %). An accuracy of one percent of reading means that for a displayed reading of 100 volts, the actual value of the voltage could be anywhere between 99 volts and 101 volts. Number of Counts The number of divisions into which a given measuring range is divided. This can be used to evaluate the resolution of an instrument. The basics of measurements DC and AC voltage One of the most basic tasks of a DMM is measuring voltage. A typical DC voltage source are the batteries while AC voltage is usually created by a generator. The wall outlets are common sources of AC voltage. Testing for proper supply voltage is usually the first step when troubleshooting a circuit. If there is no voltage present, or if it is too high or too low, the voltage problem should be corrected before investigating further. A DMM’s ability to measure AC voltage can be limited by the frequency of the signal. Most DMMs can accurately measure AC voltages with frequencies from 50 Hz to 500 Hz, but a DMMs AC measurement bandwidth may be hundreds of kilohertz wide. Such a meter may read a higher value because it is capable to see more of a complex ac signal. DMM accuracy specifications for AC voltage and AC current should state the frequency range along with the range’s accuracy. Frequency is measured in hertz (Hz) the number of times per second a waveform repeats. Maintaining the right frequency is crucial for devices that rely on AC voltage and current. Crest factor The crest factor describes the ratio of the peak value to the RMS value of an electrical variable (AC voltage and AC current). High crest factors cause distortion of the reactive power and harmonics in the supply network, and so are undesirable.

Resolution Resolution is the smallest possible change in a signal that would produce a change in the value on the screen of the test instrument. For example, if the DMM has a resolution of 1 mV on the 4 V range, it is possible to see a change of 1 mV (1/1000 of a volt) while reading 1 V.

Resistance Resistance values can vary greatly, from a few milliohms (mΩ) for contact resistance to billions of ohms for insulators. Most DMMs measure from 0.1 Ω, up to 300 MΩ. At Metrel DMM display is infinite resistance (open circuit) read as “OL” and means that the resistance is greater than the meter can measure. Resistance measurements must be made with the circuit power off – otherwise, the meter or circuit could be damaged.

6. 2

Accessories 6.38

Continuity Continuity is a quick “go/no-go” resistance test that distinguishes between an open and a closed circuit. A DMM with a continuity beeper allows you to complete many continuity tests easily and quickly. The DMM will beep if there is good continuity, or a good path that allows current to flow. If there is no continuity, the DMM won’t beep. Diode test This mode measures and displays the actual voltage drop across a junction. A silicon junction should have a voltage drop less than 0.7 V when applied in the forward direction and an open circuit when applied in the reverse direction. When the red (+) lead is connected to the anode and the black (-) to the cathode, the diode should conduct and the meter will display a value (usually the voltage across the diode in mV, 1000mV = 1V). After reversing the connections the diode should not conduct this way so the meter will display “OL”. Capacitance To test capacitance, set the dial on the DMM to the capacitance function and plug in your leads. After ensuring that the capacitor has been discharged, connect the test leads to the capacitor terminals and take a reading. If the measurement is similar to the rating listed on the capacitor, the capacitor is good. A significant variation from the rating indicates the capacitor should be replaced. DC and AC current Current measurements are different from other DMM measurements. Current measurements taken with the DMM alone require placing the meter in series with the circuit being measured. This means opening the circuit and using the DMM test leads to complete the circuit. This way all the circuit current flows through the DMMs circuitry. Current with Clamp Meter Today’s clamp meters are capable of measuring both AC and DC current. Typical current measurements are taken on various branch circuits of an electrical distribution system. By taking current measurements along the run of a branch circuit, it can be easily determined how much each load along the branch circuit is drawing from the distribution system. Many problems in buildings are invisible to the eye at first and only show up when damage is bad in irreversible, like leaks in buildings or bearing damage in engines. Cameras visualise the cool and hot spots that indicate such problems. They translate the temperature of the scene to a range of false colours.

Temperature The most obvious measuring capability of a thermal camera is temperature measurement. Apart from the sensors that form the image, cameras possesses a laser thermometer that usually indicates the temperature in the central point of the image. It also uses the thermometer to self-calibrate, adjusting the image so that the hottest point in it corresponds to one edge of the false colour spectrum and the coldest to the lowest. This makes for greatest temperature resolution in a single scene. To compare virtually similar scenes or the same scene at different times, the range must be locked. Reflected temperature The camera measures the amount of radiation coming off the measured item. This amount can be a combination of different sources. The most obvious source of heat apart from the item is usually the ambient temperature. The camera can measure it when pointed into a distance, away from anything it could focus on. The measured ambient temperature can be set as global parameter to correct the image and the measurements. Reflective index Another factor that influences amount of radiation emitting from an item is its emissivity or reflectivity. It can mostly radiate from inside, or it can mostly reflect heat from other sources. Emissivity as factor for a material can be found in tables. MD 9930 has them built in to make accurate measurements easier. One has to keep in mind that once set, the emissivity will hold for the whole image, not just the item of interest. Camera features Optical and other features of a thermal camera are the same as for a visible light one. Resolution of the sensor speaks about a number of points where temperature was measured. Focal length is a measure of magnification of the scene and of angle of view. Shorter lengths mean lower magnification and wider angle of view. Spatial resolution is the real dimension that is represented by a pixel on an image. It is expressed as a spatial angle, as it depends on distance from the lens. The smaller the angle, the higher the resolution. Minimum focus distance is the minimum distance the camera can focus the lens to. Cheaper models have fixed focus, which means all the items further than that are focused. Manual focus means different distances can be focused by hand. Combined with zoom, it can bring details from the distance. Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 3

Digital multimeters Selection Guide for Multimeters FEATURES

Description

MD 9070 Digital multimeter

MD 9060 Digital multimeter

MD 9050 Digital multimeter

MEASUREMENTS

True RMS Count

• 6000

• 9999 (AC/DCV, Hz, nS), 6000 (mV, µ/m/A, W , F)

Update rate (/s) DC voltage ranges (V) Best accuracy (%) Maximum resolution (µV) AC voltage ranges (V) Best accuracy (%) Maximum resolution (µV) DC current ranges (A) Best accuracy (%) Maximum resolution (µA) AC current ranges (A) Best accuracy (%) Maximum resolution (µA) Resistance measurement ranges Best accuracy (%) Maximum resolution (mΩ) Acoustic continuity test Diode test Capacitance ranges Best accuracy (%) Frequency measurement Best accuracy (%) Temperature measurement (Type K sensor) Best accuracy (%) Earth continuity test Insulation resistance Compare to threshold PI / DAR Conductance (nS) Duty cycle (%) Logic frequency dBm measurement 100 kHz Voltage Bandwidth Variable frequency drive Non-contact eletrical field detection (EF) 4-20 mA DC current loop (%) Analogue bar-graph Bar-graph update rate (/s) Automatic and manual range selection Compensation for test leads Incorrect lead connection alert Autocheck® with Lo-Z Hold fast data/crest capture Data hold Recording (MAX / MIN / AVG) Relative value Dual data display Backlight Flashlight Optical interface Automatic switch off Overvoltage category

5 6 V … 1000 V 0,2 1000 6 V … 1000 V 1 1000

• 50,000 (fast mode), 500,000 (stable DCV), 99,999 (Hz) fast mode 5, stable mode 1.25 500 mV … 1000 V 0,02 10 500 mV … 1000 V 0,3 10 500 µA … 10 A 0,15 0,1 500 µA … 10 A 0,5 0,1 500 Ω … 50 MΩ 0,07 100 • • 50 nF … 25 mF 0.8 10 Hz … 200 kHz 0.02 -50.0°C … 1000.0°C with comparison 0.3

•

• • • • • •

61 segment 40 •

• 41 segment 60 •

•

Dimensions with holster (mm) Weight with holster (g) IP CE mark

208 x 103 x 64,5 635 IP 40 •

SPECIAL FEATURES

GENERAL

6. 4

600 Ω … 60 MΩ 0,9 100 • •

10 Hz … 20 kHz 0.02

5 60 mV … 1000 V 0,06 10 60 mV … 1000 V 0,5 10 600 µA … 10 A 0,2 0,1 600 µA … 10 A 0,6 0,1 600 Ω … 60 MΩ 0,1 100 • • 60 nF … 25 mF 0.8 15 Hz … 50 kHz 0.04 -50.0°C … 1000.0°C with comparison 0.3

• • • •

• •

•

• MAX / MIN • •

• CAT IV / 600 V CAT III / 1000 V

Accessories 6.38

1 ms • MAX / MIN / AVG • • •

41 segment 60 • • • ACV/DCV/Ω 1 ms • MAX / MIN / AVG • • •

• • CAT IV / 1000 V

208 x 103 x 64,5 635 IP 54 •

MD 9040 Digital multimeter

MD 9016 Digital multimeter

MD 9030 Digital multimeter

MD 9020 Digital multimeter

MD 9010 Digital multimeter

• 9999 (AC/DCV, Hz, nS), 6000 (mV, µ/m/A, W , F)

6000

• 4000

4000

6000

5 60 mV … 1000 V 0,06 10 60 mV … 1000 V 0,5 10 600 µA … 10 A 0,2 0,1 600 µA … 10 A 0,6 0,1 600 Ω … 60 MΩ 0,1 100 • • 60 nF ... 25 mF 0.8 15 Hz … 50 kHz 0.04

3 60 mV … 1000 V 0.2 10 60 mV … 1000 V 1 10 600 μA … 10 A 0,5 0,1 600 μA … 10 A 1 0,1 600 Ω … 60 MΩ 0,5 100 • • 60 nF … 3000 μF 1.5 10 Hz … 50 kHz 0.03 -50.0°C … 1000.0°C

3 400mV … 1000 V 0,3 100 400mV … 1000 V 1,5 100 400 µA … 10 A 1,2 0,1 400 µA … 10 A 1,5 0,1 400 Ω … 40 MΩ 0,6 100 • • 500 nF ... 3000 μF 3.5 50 Hz … 1 MHz 0.5 -20.0°C … 300.0°C

5 6 V … 600 V 0,5 1000 6 V … 600 V 1,5 1000 400 µA, 2000 µA 1.2 0,1 400 µA, 2000 µA 1,5 0,1 600 Ω … 6 MΩ 1 100 • • 100 nF ... 2000 μF 3.5 10 Hz … 1 kHz 0.5

0.3

• •

•

• 41 segment 61 • • •

•

24 segment 40 •

•

−

•

Auto

ACV/DCV/Ω • • •

• MAX •

• • • CAT IV / 1000 V 208 x 103 x 64,5 635 IP 54 •

• • CAT IV / 300 V CAT III / 600 V CAT II / 1000 V 161 x 80 x 50 340 IP 40 •

Measuring and Regulation Equipment Manufacturer

• CAT IV / 300 V CAT III / 600 V CAT II / 1000 V 198 x 97 x 55 396 IP 40 •

Accessories 6.38

• CAT III / 300 V CAT II / 600 V 113 x 53 x 10,2 78 IP 40 •

6. 5

Digital multimeters

Digital multimeter MD 9070 TRMS Insulation / Continuity Digital Multimeter The MD 9070 is a high accuracy insulation and continuity multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The instrument is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.

MEASURING FUNCTIONS • • • • • • •

TRMS measurement; Insulation resistance measurement; Earth continuity measurement; Resistance measurement; Diode test; Mains supply frequency measurement; Frequency of digital signals measurement.

KEY FEATURES • TRMS: accurate readings on sinusoidal and non-sinusoidal signals. • VFD: feature makes the instrument capable of measuring the true values in accordance with frequency. • Auto-ranging: user can switch between auto and manual ranging.

• Relative zero mode: relative function for comparing the difference between signals or removing background noise. • MAX/MIN: recording of maximum, minimum and average values. • Data Hold: data hold feature freezes the display for later view. • PI/DAR: feature. • Safety: CAT IV / 600 V and CAT III / 1000 V overvoltage protection. • Backlight: working in dark conditions.

APPLICATION • Insulation and earth continuity tester for preventive maintenance; • High level industrial testing; • High level electronic fault finding; • Field servicing; • Heavy duty electrical testing.

STANDARDS • • • • • • • • • • • • • • • • • •

CAN/CSA-C22.2 No. 61010-1-12 Ed. 3.0 EN61326-1:2006 EN55022 EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 IEC/UL/EN61010-1 Ed. 3.0 IEC/EN61010-2-030 Ed. 1.0 IEC/EN61010-2-033 Ed. 1.0 IEC/UL/EN61010-031 Ed. 1.1 IEC/EN61557-1 IEC/EN61557-2

Directives • 2004/108/EC EMC • 2006/95/EC LVD

6. 6

Accessories 6.38

TECHNICAL DATA FUNCTION

Range

Accuracy

TRMS AC Voltage (50 Hz ... 5 kHz)

6.000 V … 1000 V

From ±(1.0% of reading + 3 digits) to ±(4.0% of reading + 5 digits)

VFD AC Voltage (10 Hz ... 440 Hz)

600.0 V

From ±(4.0% of reading + 5 digits) to ±(7.0% of reading + 5 digits)

DC Voltage

6.000 V … 1000 V

From ±(0.2% of reading + 3 digits) to ±(0.3% of reading + 3 digits)

DC Current

60 mA ... 600 mA

From ±(0,5% of reading + 3 digits)

AC Current (50 Hz ... 1 kHz)

60 mA ... 600 mA

to ±(1,5% of reading + 3digits)

Ohms

600.0 Ω … 60.00 MΩ

From ±(0.9% of reading + 2 digits) to ±(3.0% of reading + 6 digits)

Audible Continuity Tester

between 20 Ω and 200 Ω

Response time < 30 ms

Diode Tester

2.000 V

±(1.5% of reading + 4 digits)

Earth Continuity Test

0.015 Ω … 2.199 Ω at Itest > 200 mA 0.15 Ω … 21.99 Ω at Itest > 90 mA

±(1.5% of reading + 3 digits) ±(1.5% of reading + 3 digits)

Hz Line Level Frequency

10 Hz … 440 Hz; range VFD 600 V 10 Hz … 20 kHz; range 6 V … 1000 V

±(0.02% of reading + 4 digits) ±(0.02% of reading + 4 digits)

Insulation Resistance

3.000 MΩ … 55.0 MΩ at 50 V 3.000 MΩ … 110.0 MΩ at 100 V 3.000 MΩ … 275.0 MΩ at 250 V 3.000 MΩ … 550.0 MΩ at 500 V 3.000 MΩ … 300.0 MΩ at 1000 V 3000 MΩ at 1000 V 25.0 GΩ at 1000 V

±(1.5% of reading + 5 digits) ±(1.5% of reading + 5 digits) ±(1.5% of reading + 5 digits) ±(1.5% of reading + 5 digits) ±(1.5% of reading + 5 digits) ±(2.0% of reading + 5 digits) ±(10.0% of reading + 5 digits)

Sensing

AC, True RMS.

Overload Protections

Insulation Resistance: 0.4 A / 1 KV, IR 30 kA or better Earth Continuity Test: 0,25 A /1 KV, IR 30 kA or better. V: 1100 Vrms. mV, Ω & Others: 1000 Vrms.

Power Supply

Four Alkaline AA batteries (IEC LR6).

Power Consumption

4.5mA typical

Dimension (L x W x H)

208 x 103 x 64,5 mm with holster.

Weight

635 g with holster.

STANDARD SET

• • • •

Picture of MD 9070 set

MD 9070 • Multimeter MD 9070 with rubber holster • Test lead with probe, 2 pcs • Insulated crocodile clip, 2 pcs

Insulation/Continuity test lead with probe, 1 pcs 1,5 V AA battery (IEC LR6), 4 pcs Instruction manual Warranty

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 7

Digital multimeters

Digital multimeters MD 9060 TRMS, 100 kHz Voltage Bandwidth Heavy Duty Industrial Multimeter The MD 9060 ranks among the most accurate multimeters with a large bandwidth and very high resolution. Metrel MD 9060 is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, conductance measurement and fast one-handed operation. MD 9060 has a wide range of extra features, including data hold, memory, min / max, average, differential, peak, peak / peak with extra fast 1ms response time, auto power off, frequency filter, reset and relative function. The MD 9060 is the ideal choice for demanding measurement tasks in industry, in the laboratories and in everyday repair and maintenance practice.

MEASURING FUNCTIONS

KEY FEATURES

APPLICATION

• • • • • • • •

TRMS AC, DC voltage measurement; TRMS AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Duty Cycle; Mains supply frequency measurement; Frequency of digital signals measurement; • Continuity test (acoustic signalling); • Conductance measurement; • Temperature measurement.

• TRMS: accurate readings on sinusoidal and non-sinusoidal signals. • VFD: feature makes the instrument capable of measuring the true values in accordance with frequency. • Duty cycle: measure digital logic level duty cycle. • Auto-ranging: user can switch between auto and manual ranging. • Temperature measurement: measures T1, T2 and T1 + T2 temperature in Celsius and in Fahrenheit. • Lead alert: incorrect lead connection alert. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • MAX/MIN/AVG: recording of maximum, minimum and average values. • Data Hold: data hold feature freezes the display for later view. • Peak Hold: Crest (instantaneous peak) capture mode. • PC Link: test results can be downloaded to the computer via the optional PC software. • Safety: CAT IV / 1000 V overvoltage protection. • Backlight: large bright 500.000 counts dual LCD display with backlight for working in dark conditions.

• • • •

6. 8

Accessories 6.38

High level industrial testing; High level electronic fault finding; Field servicing; Heavy duty electrical testing.

TECHNICAL DATA FUNCTION

Range

Accuracy

TRMS AC and AC+DC voltage (20 Hz … 40kHz)

500.00 mV … 1000.0 V

from ±(0.45% of reading + 40 digits) to ±(4.0% of reading + 40 digits)

DC Voltage

500.00 mV … 1000.0 V

from ±(0.02% of reading + 2 digits) to ±(0.15% of reading + 2 digits)

AC Voltage (20 Hz … 100 kHz)

500.00 mV … 1000.0 V

from ±(0.3% of reading + 20 digits) to ±(4.0% of reading + 40 digits)

DC Current

500.00 µA … 10.000 A

from ±(0.15% of reading + 20 digits) to ±(0.5% of reading + 20 digits)

TRMS AC and AC+DC Current (40 Hz … 100 kHz)

600.0 µA … 10.00 A

from ±(0.5% of reading + 50 digits) to ±(5.0% of reading + 50 digits)

Diode Test

2.0000 V

±(1.0% of reading + 1 digit)

Open-circuit voltage < 3.5 V DC, Test current 0.4 mA Resistance

500.00 Ω … 50.000 MΩ

from ±(0.07% of reading + 10 digits) to ±(2.0% of reading + 6 digits)

Conductance

99.99 nS

±(2.0% of reading + 10 digits)

Capacitance

50.00 nF … 25.00 mF

from ±(0.8% of reading + 3 digits) to ±(6.5% of reading + 5 digits)

Temperature

-50.0 °C … 1000.0 °C

±(0.3% of reading + 1.5 °C)

-58.0 °F … 1832.0 °F

±(0.3% of reading + 3.0 °F)

Variable Frequency Drive AC

5 Hz … 440 Hz

from ±(2.0% of reading + 50 digits) to ±(6.0% of reading + 80 digits)

Frequency of digital equipment

5.000 Hz … 1.0000 MHz

±(0.002% of reading + 4 digits)

Mains frequency

10 Hz … 200 kHz

±(0.02% of reading + 4 digits)

Power supply

9V battery (NEDA1604G, JIS006P, or IEC6F22)

Overvoltage category

CAT IV / 1000 V

Dimensions

208 x 103 x 64.5 mm

Weight

635 g

MD 9060

• Multimeter MD 9060 with rubber holster • Test lead with probe, 2 pcs • Thermocouple probe, type K

• 9 V battery, • Instruction manual • Warranty

Measuring and Regulation Equipment Manufacturer

Picture of MD 9060 set

STANDARD SET

Accessories 6.38

6. 9

Digital multimeters

Digital multimeters MD 9050 TRMS Heavy Duty Industrial Digital Multimeter The MD 9050 ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, non-contact voltage detection, conductance measurement, auto check function and fast one-handed operation are highlights of the multimeter. The MD 9050 is the ideal choice for demanding measurement tasks in industry, in the laboratories and in everyday repair and maintenance practice.

MEASURING FUNCTIONS • • • • • • • • • • •

TRMS AC, DC voltage measurement; TRMS AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Mains supply frequency measurement; Frequency of digital signals measurement; Continuity test (acoustic signalling); Conductance measurement; Electric field detection; Temperature measurement.

KEY FEATURES • TRMS: accurate readings on sinusoidal and non-sinusoidal signals. • Autocheck function: automatic detection of AC voltage, DC voltage or resistance. • Auto-ranging: user can switch between auto and manual ranging. • Temperature measurement: measures T1, T2 and T1 + T2 temperature in Celsius and in Fahrenheit. • EF detection: non-contact and probecontact electric field detection. • Lead alert: incorrect lead connection alert. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • MAX/MIN/AVG: recording of maximum, minimum and average values. • Data Hold: data hold feature freezes the display for later view. • Peak Hold: Crest (instantaneous peak) cupture mode. • PC Link: test results can be downloaded to the computer via the optional PC software. • Safety: CAT IV / 1000 V overvoltage protection. 6. 10

• Backlight: large bright 4 digits 9999 counts dual LCD display with backlight for working in dark conditions.

APPLICATION • • • •

High level industrial testing; High level electronic fault finding; Field servicing; Heavy duty electrical testing.

STANDARD SET MD 9050 • Multimeter MD 9050 with rubber holster • Test lead with probe, 2 pcs • Thermocouple probe, type K • 9 V battery • Instruction manual • Warranty

TECHNICAL DATA FUNCTION TRMS AC and AC+DC voltage (40 Hz … 20 kHz) Autocheck (ACV) DC voltage Autocheck (DCV) DC current TRMS AC and AC+DC current (40 Hz … 1 kHz) Diode test Resistance Conductance Autocheck (resistance) Mains frequency Frequency of digital equipment Capacitance Temperature Power supply Overvoltage category Dimensions Weight

Accessories 6.38

Range 60.00 mV … 999.9 V

Accuracy from ±(0.5 % of reading + 3 digits) to ±(3.0 % of reading + 4 digits) 9.999 V … 999.9 V ±(1.0 % of reading + 4 digits) 60.00 mV … 999.9 V from ±(0.06 % of reading + 2 digits) to ±(0.12 % of reading + 2 digits) 9.999 V … 999.9 V ± (0.5 % of reading + 3 digits) 600.0 µA … 10.00 A ±(0.2 % of reading + 4 digits) 600.0 µA … 10.00 A from ±(0.6 % of reading + 3 digits) to ±(1.0 % of reading + 4 digits) 2.000 V ±(1.0 % of reading + 1 digit) Open-circuit voltage <3.5 VDC, test current 0.4 mA 600.0 Ω … 60.00 MΩ from ±(0.1 % of reading + 3 digits) to ±(1.5 % of reading + 5 digits) 99.99 nS ±(0.8 % of reading + 10 digits) 600.0 Ω … 60.00 MΩ from ± (0,5 % of reading + 4 digits) to ±(2 % of reading + 5 digits) 15.00 Hz … 50.00 kHz ±(0.04 % of reading + 4 digits) 5.00 Hz … 1.000 MHz ±(0.004 % of reading + 4 digits) 60.00 nF … 25.00 mF from ±(0.8 % of reading + 3 digits) to ±(6.5 % of reading + 5 digits) -50 °C … +1000 °C ±(0.3 % of reading +2 °C) 9 V battery (NEDA1604G, JIS006P, or IEC6F22) CAT IV / 1000 V 208 x 103 x 64.5 mm 635 g

Digital multimeters

Digital multimeters MD 9040 TRMS Industrial Digital Multimeter CAT IV / 1000 V overvoltage category and TRMS measurement of AC current and voltage are key features of the MD 9040. That’s why it is particularly suitable for performing measurements on power supply sources in the most demanding applications in the industrial sector. Its high accuracy, 2-line LCD display, diverse measurement functions, fast one-handed operation and outstanding value for money open up a wide range of possible uses.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • •

• • • •

MD 9040 • Multimeter MD 9040 with rubber holster • Test lead with probe, 2 pcs • 9 V battery • Instruction manual • Warranty

KEY FEATURES • TRMS: accurate readings on sinusoidal and non-sinusoidal signals. • Lead alert: incorrect lead connection alert. • Auto-ranging: user can switch between auto and manual ranging. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Data Hold: data hold feature freezes the display for later view. • PC Link: test results can be downloaded to the computer via the optional PC software. • Frequency measurement: up to 1 MHz. • Safety: CAT IV / 1000 V overvoltage protection. • Easy to read: large bright 4 digits 9999 counts dual LCD display.

High level industrial testing; High level electronic fault finding; Field servicing; Heavy duty electrical testing.

TECHNICAL DATA FUNCTION

Range

Accuracy

TRMS AC voltage (40 Hz … 20 kHz)

60.00 mV … 999.9 V

from ±(0.5 % of reading + 3 digits) to ±(3.0 % of reading + 4 digits)

DC voltage

60.00 mV … 999.9 V

from ±(0.06 % of reading + 2 digits) to ±(0.12 % of reading + 2 digits)

DC current

600.0 µA … 10.00 A

±(0.2 % of reading + 4 digits)

TRMS AC current (40 Hz … 1 kHz)

600.0 µA … 10.00 A

from ±(0.6 % of reading + 3 digits) to ±(1.0 % of reading + 4 digits)

Diode test

2.000 V

±(1.0 % of reading + 1 digit)

Open-circuit voltage <3.5 VDC, Test current 0.4 mA Resistance

600.0 Ω … 60.00 MΩ

from ±(0.1 % of reading + 3 digits) to ±(1.5 % of reading + 5 digits)

Mains frequency

15.00 Hz … 50.00 kHz

±(0.04 % of reading + 4 digits)

Frequency of digital equipment

5.00 Hz … 1.000 MHz

±(0.004 % of reading + 4 digits)

Capacitance

60.00 nF … 25.00 mF

from ±(0.8 % of reading + 3 digits) to ±(6.5 % of reading + 5 digits)

Power supply

9 V battery (NEDA1604G, JIS006P, or IEC6F22)

Overvoltage category

CAT IV / 1000 V

Dimensions

208 x 103 x 64.5 mm

Weight

635 g

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 11

Digital multimeters

Digital multimeters MD 9030 TRMS General Purpose Digital Multimeter The MD 9030 TRMS digital multimeter has been designed for use both in the laboratories and in the harsh industrial maintenance and repair sector. TRMS functionality makes the multimeter suitable for a multitude of situations, while the large bright screen with backlight and incorrect lead connection alert make it ideal for working in dark areas.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • • •

• • • •

MD 9030 • Multimeter MD 9030 with rubber holster • Test lead with probe, 2 pcs • 1.5 V battery, type AAA, 2 pcs • Instruction manual • Warranty

TRMS AC, DC voltage measurement; TRMS AC, DC current measurement; Capacitance measurement; Resistance measurement; Diod test; Frequency measurement; Continuity test (acoustic signalling); Temperature measurement.

KEY FEATURES

Mid level electrical testing; Mid level electronic fault finding; Field servicing; General purpose.

TECHNICAL DATA FUNCTION

Range

Accuracy

• TRMS: accurate readings on sinusoidal and non-sinusoidal signals. • Temperature measurement: measures temperature in Celsius up to 300 °C and in Fahrenheit up to 572 °F. • Frequency measurement: up to 1 MHz. • Lead alert: incorrect lead connection alert. • Auto-ranging: user can switch between auto and manual ranging. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Data Hold: data hold feature freezes the display for later view. • MAX Hold: MAX hold feature freezes the maximum measured value. • Safe: CAT IV / 300 V, CAT III / 600 V and CAT II / 1000 V overvoltage protection. • Backlight: large bright 3-3/4 digits, 4000 counts LCD display with backlight for working in dark conditions.

DC voltage

400.0 mV … 1000 V

from ±(0.3 % of reading + 4 digits) to ±(1.0 % of reading + 4 digits)

TRMS AC voltage (50 … 500 Hz)

400.0 mV … 1000 V

from ±(1.5 % of reading + 5 digits) to ±(4.0 % of reading + 5 digits)

DC current

400.0 µA … 10.00 A

from ±(1.2 % of reading + 3 digits) to ±(2.0 % of reading + 5 digits)

TRMS AC current

400.0 µA … 10.00 A

from ±(1.5 % of reading + 4 digits) to ±(2.0 % of reading + 6 digits)

Diode test

Open-circuit voltage <1.6 VDC, Test current 0.25 mA

Resistance

400.0 Ω … 40.00 MΩ

from ±(0.6 % of reading + 4 digits) to ±(2.0 % of reading + 4 digits)

Temperature

-20 °C … 300 °C

±(2.0 % of reading + 3 °C)

Frequency

50.00 Hz … 1.000 MHz

±(0.5 % of reading + 4 digits)

Capacitance

500.0 nF … 3000 µF

±(3.5 % of reading + 6 digits)

Power supply

2 x 1.5 V batteries, type AAA

Overvoltage category

CAT IV / 300 V; CAT III / 600 V; CAT II / 1000 V

Dimensions

198 x 97 x 55 mm

Weight

396 g

6. 12

Accessories 6.38

Digital multimeters

Digital multimeters MD 9020 General Purpose Digital Multimeter The MD 9020 is a high-quality digital multimeter, designed for everyday use in the laboratory and for maintenance and repair work in the field and in the industrial sector as well.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • • •

• • • •

MD 9020 • Multimeter MD 9020 with rubber holster • Test lead with probe, 2 pcs • 1.5 V battery, type AAA, 2 pcs • Instruction manual • Warranty

AC, DC voltage measurement; AC, DC current measurement; Capacitance measurement; Resistance measurement; Diod test; Frequency measurement; Continuity test (acoustic signalling); Temperature measurement.

KEY FEATURES • Temperature measurement: measures temperature in Celsius up to 300 °C and in Fahrenheit up to 572 °F. • Frequency measurement: up to 1 MHz. • Lead alert: incorrect lead connection alert. • Auto-ranging: user can switch between auto and manual ranging. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Data Hold: data hold feature freezes the display for later view. • MAX Hold: MAX hold feature freezes the maximum measured value. • Safe: CAT IV / 300 V, CAT III / 600 V and CAT II / 1000 V overvoltage protection.

Mid level electrical testing; Mid level electronic fault finding; Field servicing; General purpose.

TECHNICAL DATA FUNCTION

Range

Accuracy

DC voltage

400.0 mV … 1000 V

from ±(0.3 % of reading + 4 digits) to ±(1.0 % of reading + 4 digits)

AC voltage (50 … 500 Hz)

400.0 mV … 1000 V

from ±(1.5 % of reading + 5 digits) to ±(4.0 % of reading + 5 digits)

DC current

400.0 µA … 10.00 A

from ±(1.2 % of reading + 3 digits) to ±(2.0 % of reading + 5 digits)

AC current

400.0 µA … 10.00 A

from ±(1.5 % of reading + 4 digits) to ±(2.0 % of reading + 6 digits)

Diode test

Open-circuit voltage <1.6 VDC, Test current 0.25 mA

Resistance

400.0 Ω … 40.00 MΩ

from ±(0.6 % of reading + 4 digits) to ±(2.0 % of reading + 4 digits)

Temperature

-20 °C … 300 °C

±(2.0 % of reading + 3 °C)

Frequency

50.00 Hz … 1.000 MHz

±(0.5 % of reading + 4 digits)

Capacitance

500.0 nF … 3000 µF

±(3.5 % of reading + 6 digits)

Power supply

2 x 1.5 V batteries, type AAA

Overvoltage category

CAT IV / 300 V; CAT III / 600 V; CAT II / 1000 V

Dimensions

198 x 97 x 55 mm

Weight

396 g

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 13

Digital multimeters

Digital multimeters MD 9016 Electrical Field Service Multimeter The digital multimeter MD 9016 is a perfect combination of size, Innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electro technical problems. Display with large easy-to-read figures and one-handed operation make MD 9016 an extremely easyto-use. This compact instrument combines a high level of functionality and small size and portability.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • • • •

• HVAC (heating, ventilation and air conditioning) troubleshooting; • Low level electrical testing; • Low level electronic fault finding; • Basic field servicing; • Hobby work.

MD 9016 • Multimeter MD 9016 with rubber holster • Test lead with probe, 2 pcs • Thermocouple probe, type K • 1.5 V battery, type AAA, 2 pcs • Instruction manual • Warranty

AC, DC voltage measurement; AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Frequency measurement; Continuity test (acoustic signalling); Electric field detection; Temperature measurement.

KEY FEATURES • Auto-ranging: user can switch between auto and manual ranging. • EF detection: non-contact and probe contact electric field detection. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Hold: data hold function freezes the display for later view. • PC Link: test results can be downloaded to the computer via the optional PC software. • Safe: CAT II / 1000 V, CAT III / 600 V and CAT IV / 300 V overvoltage protection.

6. 14

TECHNICAL DATA FUNCTION DC Voltage AC Voltage (50 Hz … 500 Hz) DC Current AC Current (50 Hz … 400 Hz) Diode Test Resistance Capacitance Temperature Frequency of digital equipment Mains frequency Power supply Overvoltage category Dimensions Weight

Accessories 6.38

Range 60.00 mV … 1000 V

Accuracy from ±(0.4% of reading + 5 digits) to ±(0.2% of reading + 3 digits) 60.00 mV … 1000 V ±(1.0% of reading + 5 digits) 600.0 µA … 10.00 A from ±(0.5% of reading + 5 digits) to ±(1.8% of reading + 6 digits) 600.0 µA … 10.00 A from ±(1.0% of reading + 3 digits) to ±(1.8% of reading + 6 digits) 1.000 V ±(1.0% of reading + 3 digits) Open-circuit voltage < 1.8 V DC, Test current 0.56 mA 600.0 Ω … 60.00 MΩ from ±(0.5% of reading + 4 digits) to ±(1.2% of reading + 4 digits) 60.00 nF … 3000 µF from ±(1.5% of reading + 5 digits) to ±(2.0% of reading + 5 digits) -50 °C … 1000 °C ±(0.3% of reading + 3 digits) -58 °F … 1832 °F ±(0.3% of reading + 6 digits) 5.00 Hz … 1.000 MHz ±(0.003% of reading + 2 digits) 10 Hz … 50 kHz ±(0.003% of reading + 3 digits) 2 x 1.5 V batteries, type AAA CAT IV / 300 V; CAT III / 600 V; CAT II / 1000 V 161 x 80 x 50 mm 340 g

Digital multimeters

Digital multimeters MD 9010 General Purpose Autocheck Digital Multimeter The MD 9010 is one of the smallest and lightest of our digital multimeters. The MD 9010 unit can be used for a wide variety of applications. The high accuracy, LCD display and features including non-contact voltage detection and an autocheck function make the multimeter extremely versatile and great value for money.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • • •

• • • •

MD 9010 • Multimeter MD 9010 with rubber holster • Test lead with probe, 2 pcs • Battery • Instruction manual • Warranty

AC, DC voltage measurement; AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Frequency measurement; Continuity test; Electric field detection.

Low level electrical testing; Low level electronic fault finding; Basic field servicing; Hobby work.

TECHNICAL DATA FUNCTION

Range

Accuracy

KEY FEATURES

DC voltage

6.000 V … 600.0 V

from ±(0.5 % of reading + 3 digits) to ±(2.0 % of reading + 5 digits)

• Autocheck function: automatic detection of AC voltage, DC voltage or resistance. • Auto-ranging: no need of manual ranging. • Pocket-sized: small, thin, ergonomic design. • Lightweight: 78 g only. • Acoustic signalling on continuity test. • EF detection: non-contact and probecontact electric field detection. • Safe: protected against wrong connection and overvoltage (CAT III / 300 V and CAT II / 600 V). • Easy to read: LCD display, 3-5/6 digits, 6000 counts.

AC voltage (50 … 60 Hz)

6.000 V … 600.0 V

±(1.5 % of reading + 5 digits)

DC current

400.0 µA 2000 µA

±(1.5 % of reading + 3 digits) ±(1.2 % of reading + 3 digits)

AC current

400.0 µA 2000 µA

±(2.0 % of reading + 3 digits) ±(1.5 % of reading + 3 digits)

Diode test

Open-circuit voltage <1.6 VDC

Resistance

600.0 Ω … 6.000 MΩ

from ±(1.0 % of reading + 4 digits) to ±(2.0 % of reading + 6 digits)

Frequency

10.00 Hz … 30.00 kHz

±(0.5 % of reading + 4 digits)

Capacitance

100.0 nF … 2000 µF

±(3.5 % of reading + 6 digits)

Power supply

3 V button battery (IEC-CR2032)

Overvoltage category

CAT III / 300 V; CAT II / 600 V

Dimensions

113 x 53 x 10.2 mm

Weight

78 g

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 15

Clamp Meters Selection Guide for Clamp Meters FEATURES

Description

MD 9272 Current Meter

MD 9250 Current Meter

MD 9240 Current Meter

MEASUREMENTS

Clamp type

AC/DC

True RMS

•

Counts

3000

6000

4000, 6000, 9999

Best update rate (/s)

AC current ranges (A)

40mA … 100 A

200 A … 2000 A

40 A … 1000 A

Best accuracy (%)

0,8

DC current range (A)

200 A … 2000 A

Best accuracy (%)

Low range AmpTip clamp AC/DC Best accuracy (%) AC voltage ranges (V)

40V … 600 V

6 V … 1000 V

600 V

Best accuracy (%)

0.5

1.2

0.5

DC voltage ranges (V)

6 V … 1000 V

600 V

Best accuracy (%)

0,5

Resistance ranges (Ω)

40.00 MΩ

999.9 Ω

Best accuracy (%)

0,5

Capacitance ranges

60 nF ... 2000 μF

Best accuracy (%) Frequency max range

45.00 Hz … 500 Hz

Best accuracy (%)

0.05

Acoustic continuity test Range selection

Auto

Diode test

5.00 Hz … 500 Hz 0.5

•

Auto/manual

Auto

•

Temperature measurement (Type K probe) SPECIAL FEATURES

40.00 Hz … 1999.9 Hz

Power and power factor measurement (W, VA, VAR)

-50°C … 1000°C •

-50°C … 300°C •

Energy kWh recording 3-phase power measurement Autocheck®

V-Ω

Lo-Z (low input impedance)

•

Filter for frequency measurement

Variable frequency drive

V-A

3-phase rotation detection Non-contact electrical field detection

•

Harmonic analysis

•

Backlight

•

Flashlight COM port (data transfer)

•

MAX/MIN/AVG hold

MAX/MIN

MAX

Fast data hold - Peak hold

25 μs

5 ms

65 ms

Data hold

•

Relative value GENERAL

6. 16

•

Automatic switch off

•

Jaw opening

28 mm

55 mm

45 mm

Overvoltage category

CAT IV / 300 V CAT III / 600 V

CAT IV / 1000 V

CAT IV / 300 V CAT III / 600 V

Dimensions (mm)

190 x 60 x 13

264 x 97 x 43

224 x 78 x 40

Weight (g)

255

608

224

IP 40

CE mark

•

Accessories 6.38

MD 9235 Current Meter

MD 9231 Current Meter

MD 9225 Current Meter

MD 9226 Current Meter

MD 9210 Current Meter

AC/DC

•

6000

4000

6000

4000

40 A ...600 A

60 A … 1000 A

400 A

60 A … 600 A

600 A

1.8

1.0

1.8

1.5

60A … 1000A

400 A

60 A … 600 A

1.5

1.0

2.0

20 A/60 A

60 A/60 A

1.5

600 V

600 V, 1000 V

4 V ... 600 V

600V

600 V

0.5

0.8

1.0

1.5

600 V

600 V, 1000 V

400mV … 600 V

600V

600 V

0,5

0.8

0.3

1.2

0.3

999.9 Ω

600 Ω ... 60 kΩ

40.00 MΩ

600 Ω ... 60 kΩ

400 Ω … 40 MΩ

0,8

0,6

200 μF, 2500 μF

500 nF … 3000 μF

200 μF, 2500 μF

2.0

3.5

2.0

5.00 Hz … 500 Hz

5.00 Hz … 999.9 Hz

5 Hz … 100 kHz

5.00 Hz … 999.9 Hz

10 … 100 kHz

0.5

•

Auto

•

-20°C … 537°C • • • V-A

V-Ω • Variable frequency drive

•

Variable frequency drive

•

• • MAX

MAX/MIN/AVG

MAX

MAX/MIN/AVG

MAX

65 ms

5 ms

30 ms

80 ms

30ms

•

26 mm

51mm

26 mm

35mm

26 mm

CAT IV / 300 V CAT III / 600 V

CAT IV / 600 V CAT III / 1000 V

CAT IV / 300 V CAT III / 600 V

189 x 78 x 40

258 x 94 x 44

188 x 63 x 40

223 x 76 x 37

190 x 63 x 32

192

392

192

234

139

IP 40

IP40

IP 40

IP40

IP 40

•

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 17

Clamp Meters

Clamp Meters MD 9272 Leakage Clamp TRMS Meter with Power Functions The MD 9272 is a unique earth leakage clamp meter. It not just has the ability to accurately read the TRMS AC leakage current of a system, it can also detect losses in the system and suggest possible reasons for the loss. The voltage, power, harmonic, power factor (PF), total harmonic distortion (THD) and crest factor measurements make this instrument suitable for any electrician and engineer.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • •

• • • • •

MD 9272 • Current clamp MD 9272 • Test lead with probe, 2 pcs • 1.5 V battery, type AAA, 2 pcs • Pouch • Instruction manual • Warranty

TRMS AC voltage measurement; TRMS AC current measurement; Frequency measurement; Power parameters measurement.

KEY FEATURES • TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. • Jaw size: 28 mm. • Shielded Jaw: shielded jaw allows the clamp meter to be used in the noisiest environments. • Accurate: readings of AC current with an accuracy of 0.8 % and a base resolution of 0.01 mA and voltage with an accuracy of 0.5 % and a base resolution of 0.1 V. • Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement). • Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss. • Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th. • THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF). • Peak value: the peak value of the waveform or crest factor can be displayed. • MAX/MIN/HOLD mode: displays maximum, minimum or last measured value. 6. 18

Load and leakage current measurement; System maintenance; Power system checking; RCD fault finding; Process engineering.

TECHNICAL DATA FUNCTION AC current

Range 40.00 mA, 400.0 mA, 4000 mA 40.00 A 100.0 A 45.0 Hz … 500.0 Hz

Accuracy ±(0.8 % of reading + 3 digits) ±(1.0 % of reading + 3 digits) ±(1.2 % of reading + 3 digits) ±(0.5% of reading ± 1 digit)

Power factor (PF)

40.0 V 400.0 V, 600.0 V 0 … 99.9 % 100 … 999 % 1.00 … 2.99 3.00 … 9.99 40.00 … 100.0 A 40.00 … 600.0 V 0.00 … 1.00

±(0.5 % of reading + 4 digits) ±(0.5 % of reading + 2 digits) ±(2.0 % of reading + 3 digits) ±(2.0 % of reading + 3 digits) ±(2.0 % of reading + 2 digits) ±(3.0 % of reading + 5 digits) ±(3.0 % of reading + 3 digits) ±(3.0 % of reading + 3 digits) ± 5 digits

Phase

-180.0° … +180.0°

± 10 digits

Power (W, Var, VA)

0 … 9999

±(1 % of reading + 30)

Power (kW, kVar, kVA)

10.00 … 99.99

±(2 % of reading + 30)

Power supply

2 x 1.5 V batteries, type AAA

Overvoltage category

CAT IV / 300 V; CAT III / 600 V

Dimensions

190 x 60 x 43 mm

Weight

255 g

Mains frequency AC/DC voltage THD Crest Factor Peak value

Accessories 6.38

Clamp Meters

Clamp meters MD 9250 Industrial TRMS AC/DC CAT IV /1000 V The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MD 9250 is a high quality clamp meter specially designed for single-hand operation, built-in measuring functions; TRMS AC/ DC (current, voltage), capacitance, temperature and full range resistance makes this instrument an ideal tool for the most demanding applications in the industrial sector. The large jaws capacity of (max. 55 mm) in diameter allows AC/DC - current measurements up to 2000 A. High resolution and accuracy, 2-line LCD display fast data acquisition and transfer (via optical interface), noncontact voltage detection, and autocheck function are highlights of the instrument.

MEASURING FUNCTIONS

APPLICATION

STANDARD SET

• • • • • • • • •

• • • • •

MD 9250 • Current clamp MD 9250 • Test lead with probe, 2 pcs • Thermocouple probe, type K • Pouch • 1.5 V battery, type AAA, 2 pcs • Instruction manual • Warranty

TRMS AC, DC voltage measurement; TRMS AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Frequency measurement; Electric field detection; Continuity test (acoustic signalling); Temperature measurement.

KEY FEATURES • Large jaws: for measuring on 55mm size conductors. • TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. • VFD: feature makes the instrument capable of measuring the true values in accordance with frequency. • High current: 2000 A DC & AC clamp on measurement. • Lo-Z: AutoCheck® mode provides low (rampup) input impedance to drain ghost voltages. • Auto-check function: automatic detection of AC voltage, DC voltage or resistance. • Auto-ranging: user can switch between auto and manual ranging. • Transient protection: it protects user in case of lightning strike or switching surge up to 12 kV. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • PC Link: test results can be downloaded to the computer via the optional PC software. • In-rush: fast 5ms Crest-MAX mode to capture in-rush currents. • Temperature: measures temperature in Celsius up to 1000 °C and in Fahrenheit up to 1832 °F. • Hold: data hold function freezes the display for later view. • Backlight: large bright 3-5/6 digits 6,000 counts + 1,999 counts dual LCD display with backlight for working in dark conditions. • Safe: CAT IV / 1000 V overvoltage protection.

Solar and wind power system testing; UPS system testing; Utility scale battery system testing; High level industrial testing; High level electrical testing.

TECHNICAL DATA FUNCTION DC Voltage Autocheck (DCV) AC Voltage (50 Hz … 400 Hz) AC+DC Voltage (DC, 50Hz … 400 Hz) Autocheck (ACV) Variable Frequency Drive AC DC Current AC Current (50 Hz … 400 Hz) Diode Test Resistance & Autocheck Capacitance Temperature Mains frequency Power supply Overvoltage category Dimensions Weight

Measuring and Regulation Equipment Manufacturer

Range 6.000 V … 1000 V 6.000 V … 1000 V 6.000 V … 1000 V 6.000 V … 1000 V 6.000 V … 1000 V 10 Hz … 400 Hz

Accuracy ±(0.5% of reading + 5 digits) ±(1.3% of reading + 5 digits) ±(1.2% of reading + 5 digits) ±(1.4% of reading + 7 digits) ±(1.5% of reading + 5 digits) from ±(4.0% of reading + 80 digits) to ±(7.0% of reading + 80 digits) 200.0 A … 2000 A from ±(2.0% of reading + 5 digits) to ±(2.5% of reading + 5 digits) 200.0 A … 2000 A from ±(2.0% of reading + 5 digits) to ±(3.5% of reading + 5 digits) 1.000 V ±(1.0% of reading + 3 digit) Open-circuit voltage < 1.8 V DC, Test current 0.56 mA 600.0 Ω … 40.00 MΩ from ±(0.5% of reading + 5 digits) to ±(2.3% of reading + 5 digits) 60.00 nF … 2000 µF from ±(2.0% of reading + 5 digits) to ±(4.0% of reading + 5 digits) -50 °C … 1000 °C ±(0.3% of reading + 4 digits) -58 °F … 1832 °F ±(0.3% of reading + 6 digits) 10 Hz … 1999 Hz ±(0.1% of reading + 4 digits) 2 x 1.5 V batteries, type AA CAT IV / 1000 V 264 x 97 x 43 mm 608 g

Accessories 6.38

6. 19

Clamp Meters

Clamp Meters MD 9240 TRMS Power Clamp Meter The MD 9240 is a high-quality and extremely easy to handle power clamp meter. The MD 9240 enables TRMS AC current measurement up to 1000 A, AC and DC voltage measurement, single-phase power analysis, temperature measurement and more. As a result the current clamp meter is suitable for maintenance and checking of distribution systems, switchboards and motors or systems where the supply network is heavily contaminated with harmonics.

MEASURING FUNCTIONS

APPLICATION

• • • • • • •

• • • •

TRMS AC, DC voltage measurement; TRMS AC current measurement; Frequency measurement; Resistance measurement; Continuity test; Temperature measurement; Power parameters measurement.

KEY FEATURES • TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. • Jaw size: 45 mm. • High current: measures up to 1000 A AC. • Autocheck function: automatic detection of AC voltage, DC voltage or AC current. • Power: measures various power parameters (active, reactive, apparent power, PF). • Temperature: measures temperature in Celsius up to 300 °C and in Fahrenheit up to 572 °F. • PC Link: test results can be downloaded to the computer via the optional PC software. • Data Hold: data hold feature freezes the display for later view. • Peak Hold: peak hold feature displays maximum RMS value of surge voltage or current. 6. 20

STANDARD SET

System maintenance; Power system checking; High level Industrial testing; High level electrical testing.

MD 9240 • Current clamp MD 9240 • Test lead with probe, 2 pcs • Thermocouple probe, type K • 1.5 V battery, type AAA, 2 pcs • Pouch • Instruction manual • Warranty

TECHNICAL DATA FUNCTION DC voltage AC voltage (50 … 60 Hz; 45 … 500 Hz; 500 Hz … 3.1 kHz) AC current (50 … 60 Hz) AC current (45 … 500 Hz) AC current (500 Hz … 3.1 kHz) Temperature Resistance Continuity test Frequency Power factor (PF) Apparent power Active power, reactive power Power supply Overvoltage category Dimensions Weight

Accessories 6.38

Range 600.0 V 600.0 V 40.00 A, 400.0 A, 1000 A 40.00 A, 400.0 A, 1000 A 40.00 A, 400.0 A, 1000 A -50 °C … 300 °C 999.9 Ω 10 … 300 Ω 5.00 Hz … 500.0 Hz 0.10 … 0.99

Accuracy ±(0.5 % of reading + 5 digits) from ±(0.5 % of reading + 5 digits), to ±(2.5 % of reading + 5 digits) ±(1.0 % of reading + 5 digits) ±(2.0 % of reading + 5 digits) ±(2.5 % of reading + 5 digits) ±(2.5 % of reading + 5 digits) ±(3.0 % of reading + 5 digits) ±(2.0 % of reading + 3 °C) ±(1.0 % of reading + 6 digits)

±(0.5 % of reading + 4 digits) ±(3 digits), H from 1. to 21. ±(5 digits), H from 22. to 51. 0 … 600.0 kVA ±(2.0 % of reading + 6 digits), H 1./10. ±(3.5 % of reading + 6 digits), H 11./46. ±(5.5 % of reading + 6 digits), H 47./51. 0 … 600.0 kW, kVar from ±(2.0 % of reading + 6 digits) 2 x 1.5 V batteries, type AAA CAT IV / 300 V; CAT III / 600 V 224 x 78 x 40 mm 224 g

Clamp Meters

Clamp meters MD 9235 TRMS Power Clamp Meter, 3-Phase, Unbalanced-Load The MD 9235 is a Slim-Jaw current clamp meter with ability to measure 3-Phase Unbalanced-Load + kWHr recording. The MD 9235 enables TRMS AC current measurement up to 600 A, single and 3-phase power analysis, total power factor and resistance measurement. Display with large easy-to-read figures and one-handed operation make MD 9235 an extremely easy-to-use. This compact instrument combines a high level of functionality, small size and portability. All built-in features make MD 9235 a perfect tool for advanced Power applications.

MEASURING FUNCTIONS

STANDARD SET

• • • • • •

MD 9235

TRMS AC, DC voltage measurement; TRMS AC current measurement; Resistance measurement; Frequency measurement; Continuity test (acoustic signalling); Power parameters measurement.

• • • •

• Current clamp MD 9235 • Test lead with probe, 2 pcs

Pouch 1.5 V battery, type AAA, 2 pcs Instruction manual Warranty

KEY FEATURES • Slim-Jaws: ultra-slim jaws to access tight places. • TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. • kWHr: Kilo-Watt-Hour recording function (with memory recall). • Peak Hold: peak hold feature displays maximum RMS value of surge voltage or current. • Jaw size: 26 mm. • Transient protection: it protects user in case of lightning strike or switching surge up to 6.5 kV. • Hold: data hold function freezes the display for later view. • Safe: CAT IV / 300 V, CAT III / 600 V overvoltage protection.

APPLICATION • Power system checking; • High level industrial testing; • High level electrical testing.

TECHNICAL DATA FUNCTION DC Voltage AC Voltage (50 Hz … 3.1 kHz) AC Current (40 Hz … 3.1 kHz) Resistance Apparent power Active power, reactive power

Power factor (PF) Mains frequency Power supply Overvoltage category Dimensions Weight

Measuring and Regulation Equipment Manufacturer

Range 600.0 V 600.0 V

Accuracy ±(0.5% of reading + 5 digits) from ±(0.5% of reading + 5 digits) to ±(2.5% of reading + 5 digits) 40.00 A … 600 A from ±(1.0% of reading + 5 digits) to ±(3.0% of reading + 5 digits) 999.9 Ω ±(1.0% of reading + 6 digits) 0 kVA … 600.0 kVA ±(2.0% of reading + 6 digits), H 1./10. ±(3.5% of reading + 6 digits), H 11./46. ±(5.5% of reading + 6 digits), H 46./51. 0 kVA … 600.0 kW, kVar from ±(2.0% of reading + 6 digits) to ±(10.0% of reading + 6 digits), H 1./10. from ±(3.5% of reading + 6 digits) to ±(10.0% of reading + 6 digits), H 11./25. from ±(4.5% of reading + 6 digits) to ±(15.0% of reading + 6 digits), H 26./45. from ±(10.0% of reading + 6 digits) to ±(15.0% of reading + 6 digits), H 46./51. 0.10 … 0.99 ±( 3 digits), H 1./21. ±( 5 digits), H 22./51. 5 Hz … 500 Hz ±(0.5% of reading + 4 digits) 2 x 1.5 V batteries, type AAA CAT IV / 300 V, CAT III / 600 V 189 x 78 x 40 mm 192 g

Accessories 6.38

6. 21

Clamp Meters

Clamp Meters MD 9231 Industrial TRMS AC/DC Current Clamp Meter The MD 9231 is an industrial TRMS AC and DC current clamp meter with a wide jaw opening and is capable of measuring currents up to 1000 A. It has the ability to measure capacitance and frequency and is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency. The MD 9231 has a wide range of extra features, including peak value, data and MAX hold functions, auto power off, auto-ranging and a relative zero function. It uses state-of-the-art measurement technology and is housed in a sturdy industrial-grade case. It also has a flashlight for work in dark conditions.

MEASURING FUNCTIONS

STANDARD SET

• DC and TRMS AC voltage measurement up to 1000 V; • DC and TRMS AC current measurement up to 1000 A; • Resistance measurement; • Acoustic continuity test; • Diode test; • Frequency measurement; • Capacitance measurement.

MD 9231 • Current clamp MD 9231 • Test lead, 2 pcs

KEY FEATURES • Auto-ranging. • LCD display with backlight, 3-5/6 digit, 6000 count. • Flashlight. • AmpTip™ Low current & Hz: clamp tip for measuring AC and DC current up to 60 A. • Automatic, non-contact detection of electromagnetic fields to locate and trace live conductors. • Data hold function. • MIN/MAX/AVG function. • Relative zero. • 51 mm jaw opening. • CAT IV / 600 V, CAT III / 1000 V overvoltage categories.

FUNCTION DC Voltage AC Voltage (50 Hz ... 400 Hz) DC+AC Voltage (DC, 50 Hz ... 400 Hz) PEAK-rms (ACV & ACA) CREST (Peak-Hold) Audible Continuity Tester Ohm Capacitance Diode Tester AmpTip™ clamp-on DCA

APPLICATION • • • •

Power Supply Power Consumption Dimension (L x W x H) Weight Jaw opening & Conductor diameter

6. 22

Battery, 2 pcs Pouch Instruction manual Warranty

TECHNICAL DATA

AmpTip™ clamp-on ACA (40 Hz ... 400 Hz) AmpTip™ clamp-on DC+ACA (DC, 40 Hz ... 400 Hz) Regular Clamp-on DCA Regular Clamp-on ACA (40 Hz ... 400 Hz) Regular Clamp-on DC+ACA (DC, 40 Hz ... 400 Hz) Hz Line Level Frequency Non-Contact EF-Detection Detection Frequency Transient Protection Overload Protections

System maintenance; Power system checking; High level industrial testing; High level electrical testing.

• • • •

Accessories 6.38

Range 600.0 V ... 1000.0 V 600.0 V ... 1000.0 V 600.0 V ... 1000.0 V

Accuracy ±(0.8% of reading + 5 digits) from ±(0.8% of reading + 5 digits) to ±(10% of reading + 5 digits) from ±(1.0% of reading + 7 digits) to ±(12% of reading + 7 digits)

Response: 80 ms to > 90%. Accuracy: Add 250 digits to specified accuracy for changes > 5ms Audible Threshold: At between 10 Ω and 250 Ω. Response time: 32 ms approx. 600.0 Ω, 6.000 kΩ, 60.00 kΩ ±(1.0% of reading + 5 digits) 200.0 μF, 2500 μF ±(2.0% of reading + 4 digits) 2.000 V ±(1.5% of reading + 5 digits) 00.00 A … 60.00 A from ±(1.5% of reading + 5 digits) to ±(3.0% of reading + 5 digits) 00.00 A … 60.00 A from ±(1.5% of reading + 5 digits) to ±(3.0% of reading + 5 digits) 00.00 A … 60,00 A from ±(2.0% of reading + 7 digits) to ±(3.0% of reading + 7 digits) 60.00 A … 1000 A ±(1.8% of reading + 5 digits) 60.00 A … 1000 A from ±(1.8% of reading + 5 digits) to ±(2.2% of reading + 5 digits) 60.00 A … 1000 A from ±(2.2% of reading + 7 digits) to ±(2.5% of reading + 7 digits) 5.00 Hz … 999.9 Hz ±(1.0% of reading + 5 digits) 20 V … 440 V Tolerance: 10 V … 1000 V 50/60Hz 8.0 kV (1.2/50 µs surge) Current & Hz functions via jaws: 1000 ADC/AAC rms at < 400 Hz Other functions via terminals: 1000 VDC/VAC rms 2 x 1.5 V batteries, type AAA Typical 13 mA for Current functions 258 x 94 x 44 mm 392 g 51 mm max

Clamp Meters

Clamp meters MD 9226 TRMS AC/DC Current Clamp Meter The MD 9226 is a professional DC and TRMS AC current clamp meter capable of measuring capacitance and frequency. It is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency. The MD 9226 has a wide range of extra features, including peak value, data and MAX hold functions, auto power off, auto-ranging and a relative zero function. It uses state-of-the-art measurement technology and is housed in a sturdy industrial-grade case.

MEASURING FUNCTIONS

STANDARD SET

• DC and TRMS AC voltage up to 600 V; • TRMS AC current measurement up to 600 A; • Resistance measurement; • Acoustic continuity test; • Diode test; • Frequency measurement; • Capacitance measurement; • Temperature measurement.

MD 9226 • Current clamp MD 9226 • Test lead, 2 pcs

KEY FEATURES • Auto-ranging. • LCD display with backlight, 3-5/6 digit, 6000 count. • AmpTip™ Low current & Hz: clamp tip for measuring AC and DC current up to 60 A. • Automatic, non-contact detection of electromagnetic fields to locate and trace live conductors. • Data hold function. • MIN/MAX/AVG function. • Peak value. • Relative zero. • 35 mm jaw opening. • CAT IV / 300 V, CAT III / 600 V overvoltage categories.

APPLICATION • • • •

System maintenance; Power system checking; High level industrial testing; High level electrical testing.

• • • •

Battery, 2 pcs Pouch Instruction manual Warranty

TECHNICAL DATA FUNCTION DC Voltage AC Voltage (50 Hz … 60 Hz) DC+AC Voltage (DC, 50 Hz … 60 Hz) PEAK-rms (ACV & ACA) Audible Continuity Tester Ohm Capacitance Diode Tester AmpTip™ clamp-on ACA (50 Hz … 60 Hz) AmpTip™ clamp-on DCA AmpTip™ clamp-on DC+ACA (DC, 50 Hz … 60 Hz) Regular Clamp-on ACA (50 Hz … 400 Hz) Regular Clamp-on DCA Regular Clamp-on DC+ACA (DC, 50 Hz … 400 Hz) Hz Line Level Frequency Non-Contact EF-Detection Detection Frequency Transient Protection Overload Protections Power Supply Power Consumption Dimension (L x W x H) Weight Jaw opening & Conductor diameter

Measuring and Regulation Equipment Manufacturer

Range Accuracy 600.0 V ±(1.0% of reading + 5 digits) 600.0 V ±(1.0% of reading + 5 digits) 600.0 V ±(1.2% of reading + 7 digits) Response: 80 ms to > 90% Audible Threshold: At between 10 Ω and 250 Ω. Response time: 32ms approx. 600.0 Ω, 6.000 kΩ, 60.00 kΩ ±(1.0% of reading + 5 digits) 200.0 µF, 2500 µF ±(2.0% of reading + 4 digits) 2.000 V ±(1.5% of reading + 5 digits) 60.00 A ±(1.5% of reading + 5 digits) 60.00 A 60.00 A

±(2.0% of reading + 5 digits) ±(2.0% of reading + 7 digits)

60.00 A … 600.0 A

from ±(1.8% of reading + 5 digits) to ±(2.0% of reading + 5 digits) ±(2.0% of reading + 5 digits) from ±(2.2% of reading + 7 digits) to ±(2.7% of reading + 7 digits) ±(1.0% of reading + 5 digits) Tolerance: 10 V … 600 V

60.00 A … 600.0 A 60.00 A … 600.0 A

5.00 Hz … 999.9 Hz 20 V … 440 V 50/60 Hz 6.0 kV (1.2/50 µs surge) Current & Hz functions via jaws: 600 A DC/ A AC rms at < 400 Hz Other functions via terminals: 600 V DC / V AC rms 2 x 1.5 V batteries, type AAA 13 mA 223 x 76 x 37 mm 234 g 35 mm

Accessories 6.38

6. 23

Clamp Meters

Clamp meters MD 9225 Most Complete Industrial TRMS AC/DC Current Clamp Meter The MD 9225 is a versatile current clamp meter with perfect combination of size and builtin functions. It measures AC/DC current and voltage, capacitance, temperature, full range resistance and captures In-rush current. Display with large easy-to-read figures and one-handed operation make MD 9225 an extremely easy-to-use. This compact instrument combines a high level of functionality, small size and portability. All built-in features make MD 9225 a perfect tool for advanced applications.

MEASURING FUNCTIONS

APPLICATION

• • • • • • • •

• • • •

TRMS AC, DC voltage measurement; TRMS AC, DC current measurement; Capacitance measurement; Resistance measurement; Diode test; Frequency measurement; Continuity test (acoustic signalling); Temperature measurement.

STANDARD SET

Solar and wind power system testing; UPS system testing; Utility scale battery system testing; Working in small enclosures.

MD 9225 • Current clamp MD 9225 • Test lead with probe, 2 pcs • Thermocouple probe, type K • Pouch • 1.5 V battery, type AAA, 2 pcs • Instruction manual • Warranty

KEY FEATURES • Clamp on + Full Multimeter ranges: measures current up to 400 A AC/DC. • Jaw size: 26 mm. • In-rush: fast 30 ms Crest-MAX mode to capture in-rush currents. • Temperature: measures temperature in Celsius up to 537 °C and in Fahrenheit up to 999 °F. • Transient protection: it protects user in case of lightning strike or switching surge up to 6.5 kV. • High resolution: 4000 counts enable fast measurements. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Hold: data hold function freezes the display for later view. • Safe: CAT IV / 300 V, CAT III / 600 V overvoltage protection. 6. 24

TECHNICAL DATA FUNCTION DC Voltage AC Voltage (50 Hz … 500 Hz) DC Current AC Current (40 Hz … 400 Hz) Diode Test Resistance Capacitance Temperature

Mains frequency Power supply Overvoltage category Dimensions Weight

Accessories 6.38

Range 400.0 mV … 600 V

Accuracy From ±(0.3% of reading + 3 digits) to ±(1.0% of reading + 4 digits) 4.000 V … 600 V From ±(1.0% of reading + 4 digits) to ±(2.0% of reading + 4 digits) 0.0 A … 400.0 A From ±(1.0% of reading + 4 digits) to ±(2.5% of reading + 5 digits) 0 A … 400 A From ±(1.0% of reading + 6 digits) to ±(2.5% of reading + 5 digits) Open-circuit voltage < 1.6 V DC, Test current 0.4 mA 400.0 Ω ... 40.00 MΩ From ±(0.8% of reading + 6 digits) to ±(2.0% of reading + 4 digits) 500.0 nF … 3000 µF ±(3.5% of reading + 6 digits) -20 °C … 537 °C From ±(2.0% of reading + 3 digits) to ±(3.0% of reading + 3 digits) -4 °F … 1000 °F From ±(2.0% of reading + 6 digits) to ±(3.0% of reading + 6 digits) 5 Hz …100 kHz ±(0.5% of reading + 4 digits) 2 x 1.5 V batteries, type AAA CAT IV / 300 V, CAT III / 600 V 188 x 63 x 40 mm 218 g

Clamp Meters

Clamp meters MD 9210 Mini Clamp Meter Versatility, sturdy case, high accuracy and lots of measurement functions are key features of the current clamp MD 9210. This universal current clamp offers good value for money.

STANDARD SET

MEASURING FUNCTIONS

APPLICATION

• • • • • • •

• Working in small enclosures; • General purpose; • 3-phase machinery testing.

AC, DC voltage measurement; AC current measurement; Frequency measurement; Resistance measurement; Continuity testing; Capacitance measurement; Diode test.

KEY FEATURES • Jaw size: 26 mm. • Lightweight: 139 g only. • High specification: readings up to 600 A with excellent accuracy. • Auto-ranging: no need of manual ranging. • Relative zero mode: relative function for comparing the difference between signals or removing background noise. • Data Hold: data hold feature freezes the display for later view. • MAX Hold: MAX hold feature freezes the maximum measured value. • Easy to read: large bright 3-3/4 digits 4000 counts LCD display.

MD 9210 • Current clamp MD 9210 • Test lead with probe, 2 pcs • 3 V battery • Pouch • Instruction manual • Warranty

TECHNICAL DATA FUNCTION DC voltage AC voltage (50 Hz … 500 Hz) AC current (50 / 60 Hz) Resistance

Diode test Frequency Capacitance Power supply Overvoltage category Dimensions Weight

Measuring and Regulation Equipment Manufacturer

Range Accuracy 400.0 mV ±(0.3 % of reading + 4 digits) 4.000 V, 40.00 V, 400.0 V ±(0.5 % of reading + 3 digits) 600 V ±(1.0 % of reading + 4 digits) 4.000 V, 40.00 V, 400.0 V ±(1.5 % of reading + 5 digits) 600 V ±(2.0 % of reading + 5 digits) 40.00 A, 400.0 A, 600 A ±(1.5 % of reading + 8 digits) 400.0 Ω ±(0.8 % of reading + 8 digits) 4.000 kΩ, 40.00 kΩ, 400.0 kΩ ±(0.6 % of reading + 4 digits) 4.000 MΩ ±(1.0 % of reading + 4 digits) 40.00 MΩ ±(2.0 % of reading + 4 digits) Open-circuit voltage <1.6 VDC, test current 0.25 mA 10 Hz … 100 kHz ±(0.5 % of reading + 4 digits) 500.0 nF … 3000 µF ±(3.5 % of reading + 6 digits) 3 V battery (IEC-CR2032) CAT IV / 300 V; CAT III / 600 V 190 x 63 x 32 mm 139 g

Accessories 6.38

6. 25

Voltage and continuity testers Selection Guide for Voltage and Continuity Testers FEATURES

Description

MD 1160 LCD Voltage / Continuity Tester

MD 1060 LCD Voltage / Continuity Tester

AC VOLTAGE

Test Range

12 V ... 690 V

Response Time

<1s

Frequency Range

16 ... 400 Hz

Test Range

12 V ... 690 V

Response Time

<1s

Indication

Acoustical and LED indication

Continuity test (Acoustic)

0 ... 500 kΩ +50%

Test current

3.5 mA

Phase Testing

Single-Pole Phase testing

Phase Sequence

Two-Pole Phase Sequence testing

Phase indication

>100 V AC

Type

LC display

LED display

Tolerance

0 V ... 690 V ± (3% ± 5dgt)

12 V, 24 V, 50 V, 120 V, 230 V, 400 V, 690 V

Torch lamp

LED

Overload Category

CAT IV 600 V

Compliant to standards

IEC/EN 61243-3:2014, DIN VDE 0411, IEC 61010, GS38

Protection degree

IP64 For outdoor use: Water jet and dust tight protection

Temperature range

-15 ... 55 °C

Battery type

2 x 1,5 V Type AAA Micro

Dimensions

240 x 60 x 20 mm

Weight

200 g

DC VOLTAGE RESISTANCE & CONTINUITY TEST PHASE TESTING

DISPLAY

GENERAL

6. 26

Accessories 6.38

Voltage and continuity testers

Voltage and continuity testers MD 1160 LCD Voltage / Continuity Tester A two-pole voltage detector is a basic tool kit for electricians. High quality rubber construction make this the professional’s choice. Both models support Voltage measurement, Continuity measurement, Single pole test, Phase rotating field test and a torch function via a white LED for working in dark areas. The products are built in accordance to the latest voltage tester standard IEC/EN 61243-3:2014 and are GS approved by TÜV test lab.

MEASURING FUNCTIONS • • • •

AC, DC voltage testing; Phase testing; Rotary field testing; Continuity testing.

KEY FEATURES • Voltage testing up to 690 V; • Automatic AC/DC recognition; • Continuity buzzer and led to indicate resistances below 500 kΩ; • Phase & Rotating Field Test; • Auto Power Off; • LCD display (MD 1160); • Optical and Acoustic indication of Protective Extra Low Voltage.

TECHNICAL DATA FUNCTION

Range

Nominal voltage range

12 V … 690 V AC TRMS (automatic range selection)

Nominal voltage range

12 V … 690 V DC (automatic range selection)

Frequency range

16 … 400 Hz

Continuity test (Acoustic)

0 … 500 kΩ

RCD test current

3.5 mA

Phase indication

>100 VAC

Phase rotation determination

2-pole

Reaction time

< 0.1 s

Display

LC display

Power supply

2 x 1.5 V batteries, type AAA

Overvoltage category

CAT IV / 600 V

Dimensions

240 x 60 x 20 mm

Weight

200 g

APPLICATION • • • •

Mid-level electrical testing; Mid-level electronic fault finding; Field servicing; General purpose.

STANDARD SET MD 1160 • Voltage tester MD 1160 • 1.5 V battery, type AAA, 2 pcs • Plastic probe guard (in accordance with GS38) • Instruction manual • Warranty

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 27

Voltage and continuity testers

Voltage and continuity testers MD 1060 LCD Voltage / Continuity Tester A two-pole voltage detector is a basic tool kit for electricians. High quality rubber construction make this the professional’s choice. Both models support Voltage measurement, Continuity measurement, Single pole test, Phase rotating field test and a torch function via a white LED for working in dark areas. The products are built in accordance to the latest voltage tester standard IEC/EN 61243-3:2014 and are GS approved by TÜV test lab.

MEASURING FUNCTIONS • • • •

AC, DC voltage testing; Phase testing; Rotary field testing; Continuity testing.

KEY FEATURES • Voltage testing up to 690 V; • Automatic AC/DC recognition; • Continuity buzzer and led to indicate resistances below 500 kΩ; • Phase & Rotating Field Test; • Auto Power Off; • LED display (MD 1060); • Optical and Acoustic indication of Protective Extra Low Voltage.

APPLICATION • • • •

TECHNICAL DATA FUNCTION

Range

Nominal voltage range

12 V … 690 V AC TRMS (automatic range selection)

Nominal voltage range

12 V … 690 V DC (automatic range selection)

Frequency range

16 … 400 Hz

Continuity test (Acoustic)

0 … 500 kΩ

RCD test current

3.5 mA

Phase indication

>100 VAC

Phase rotation determination

2-pole

Reaction time

< 0.1 s

Display

LED bargraph

Power supply

2 x 1.5 V batteries, type AAA

Overvoltage category

CAT IV / 600 V

Dimensions

240 x 60 x 20 mm

Weight

200 g

Mid-level electrical testing; Mid-level electronic fault finding; Field servicing; General purpose.

STANDARD SET MD 1060 • Voltage tester MD 1060 • 1.5 V battery, type AAA, 2 pcs • Plastic probe guard (in accordance with GS38) • Instruction manual • Warranty

6. 28

Accessories 6.38

Non contact voltage detectors Selection Guide for Non Contact Voltage Detector FEATURES

Description

MD 126 MD 116 MD 106 Non-contact voltage and Non Contact Voltage Detector Non Contact Voltage Detector phase rotation detector NEW

MEASUREMENTS

Measurement range

100 … 1000 V AC

12 … 1000 V AC

90 … 1000 V AC

Frequency Range

45 ... 60 Hz

40 ... 400 Hz

50 … 60 Hz

Phase sequence

•

Optical

•

Acoustical

•

DISPLAY

•

Vibrating GENERAL

Overvoltage category

CAT IV / 1000 V

Degree of protection

IP67

IP65

Battery type

2 x 1,5 V LR03 batteries (type AAA)

Dimensions

162 x 24 x 29 mm

155 x 25 x 23 mm

Weight

69 g

58 g

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 29

6. 30

Accessories 6.38

NEW

Non contact voltage detectors MD 126 Non-contact voltage and phase rotation detector

Non contact voltage detectors

Voltage detection is the most basic safety test. The MD 126 offers a non-contact detection using coloured LED lights as indication. In a three phase system, the coloured lights indicate the phase sequence. A practical flashlight completes the functionality. The housing is small and light with the IP67 protection against water and dust, and 3 m drop test for robustness.

MEASURING FUNCTIONS

TECHNICAL DATA

• Voltage detection; • Phase sequence detection.

FUNCTION

Range

Detection voltage range

100 V … 1000 V

Phase sequence range

200 V … 1000 V

Frequency range

50/60 Hz

Batteries

2 AAA, 1.5 V

Operating temperature

0 … 50 °C

Operating humidity

80 % max

Storage temperature

-10 °C … 60 °C

Altitude limit

2000 m

Pollution degree

Safety

CAT IV / 1000 V

Dimensions

162 x 24 x 29 mm

Weight

Approx. 69 g

KEY FEATURES • Measures both voltage presence and phase sequence; • Wide measuring range 100 V ... 1000 V; • Robust housing with IP67 and 3 m drop test; • Flashlight; • Sound and coloured light indication.

APPLICATION • Basic electrical safety; • Low-level electrical testing. STANDARD SET MD 126 • MD 126 Non-contact voltage and phase rotation detector • 2 AAA 1.5V batteries • Instruction manual • Warranty

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 31

Non contact voltage detectors

Non contact voltage detectors MD 116 Non Contact Voltage Detector The MD 116 is a non-contact voltage tester that features an optical, acoustical and a vibrating indicator. It comes complete with a pocket clip. It is easy to operate and is an essential tool for both home handymen and professionals. The MD 116 can detect live-voltage wires in splices, cable plugs, cable drums, sockets, switches and junction boxes. The operation of the MD 116 is self-tested automatically after power up. No extra button required. It supports switching between low and high sensitivity (12 / 90 V AC) and has an integrated LED flashlight for working in dark conditions. The Metrel MD 116 uses a capacitive measuring process. In contrast to inductive measurements, no flow of current is required.

MEASURING FUNCTIONS

TECHNICAL DATA

• Non-contact voltage detection from 12 V AC; • High performance LED flashlight; • Optical, acoustical and vibrating indication in case of power.

FUNCTION

Range

Display

Optical, acoustical, vibrating

Overvoltage category

CAT IV / 1000 V

Measurement range

12 … 1000 V AC

Frequency range

40 … 400 Hz

Temperature range

0 … 40°C, < 80% relative humidity

Current consumption

80 mA

Duty cycle

Continuous

Power supply

2 x 1,5 V LR03 batteries (type AAA)

Degree of protection

IP 65

Dimensions

155 x 25 x 23 mm

Weight

Approx. 58 g

KEY FEATURES • 12 V … 1000 V AC measurement range. • Optical, acoustical and vibrating indication. • CAT IV / 1000 V overvoltage protection.

APPLICATION • General purpose. • Low level electrical testing. • Hobby work. STANDARD SET MD 116 • Non-contact voltage detector MD 116 • 1.5 V battery test, type AAA, 2 pcs • Instruction manual • Warranty

6. 32

Accessories 6.38

Non contact voltage detectors

Non contact voltage detectors MD 106 Non Contact Voltage Detector The MD 106 is a basic non-contact voltage tester that features an optical and acoustical indicator. It comes complete with a pocket clip. It is easy to operate and is an essential tool for both home handymen and professionals. The MD 106 can detect live-voltage wires in splices, cable plugs, cable drums, sockets, switches and junction boxes. The operation of the MD 106 can be verified with the self-test button. The Metrel MD 106 uses a capacitive measuring process. In contrast to inductive measurements, no flow of current is required.

MEASURING FUNCTIONS

TECHNICAL DATA

• Non-contact voltage detection from 90 V AC. • Optical and acoustical indication in case of power.

FUNCTION

Range

Display

Optical, acoustical

Overvoltage category

CAT IV / 1000 V

Measurement range

90 … 1000 V AC

Frequency range

50 … 60 Hz

Temperature range

-10°C ...+50°C, < 75% relative humidity

Current consumption

80 mA

Duty cycle

Continuous

Power supply

2 x 1,5 V LR03 batteries (type AAA)

Degree of protection

IP 65

Dimensions

155 x 25 x 23 mm

Weight

Approx. 56 g

KEY FEATURES • 90 V … 1000 V AC measurement range. • Optical and acoustical indication. • CAT IV / 1000 V overvoltage protection.

APPLICATION • General purpose. • Low level electrical testing. • Hobby work. STANDARD SET MD 106 • Non-contact voltage detector MD 106 • 1.5 V battery test, type AAA, 2 pcs • Instruction manual • Warranty

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

6. 33

Thermal cameras Selection Guide for Thermal cameras FEATURES

Description

MD 9930 Thermal camera

MD 9910 Thermal camera

MD 9880 TRMS thermal multimeter

FEATURES

IR sensor resolution

160 x 120 pxl

80 x 80 pxl

80 x 81 pxl

Temperature range

-20 ... 350°C

-20 ... 380 °C

-20 ... 260°C

Thermal sensitivity/NETD

0.1°C @ 30°C / 100 mK

Thermal accuracy

±2°C or ±2 %

±2°C or ± 2 %

±3°C or ±3.0 %

Field of vision

25° x 19°

21° x 21°

Spectral range

8 ... 14 µm

Emmisivity range

0.01 ... 1.0

Frame rate

50 Hz

50 HZ

Focal length

9 mm

7.5 mm

Spatial resolution

2.78 mrad

4.53 mrad

Level and span

Auto and manual

Auto

Min focused distance

0.5m

Focus

Manual

Fixed

Visible light camera

•

Fusion view

•

Display resolution

240 x 320 pxl

Thermal video

•

Data storage

Internal 100 MB + SD card up to 32 GB

Internal 20 images

Battery

Li-Ion, up to 4h

Li-Ion, up to 6h

GENERAL

Multimeter

6. 34

Li-Ion, up to 6h •

Accessories 6.38

Thermal cameras

Thermal cameras MD 9930 Thermal camera MD 9930 is the go-to imager for most applications. Extremely versatile, with a great thermal resolution, it can view and check nearly any thermally stressed object. From electrical distribution boards, motors, bearings and friction, to hidden fault finding in the water supply or electrical systems in buildings. It can shoot both thermal, visible light and combined images that help with orientating and locating the fault from the image. Thermal focus is can be set manually and there is 32x digital zoom available. Cursors and central thermometer make images easy to read while thermal videos with high frame rate can follow quick changes in temperature. Audio comments can be added to the videos.

MEASURING FUNCTIONS

STANDARD SET

• Temperature; • Temperature difference.

MD 9930 • MD 9930 Thermal camera • USB cable • USB OTG cable • MicroSD card

KEY FEATURES • Very fast frame rate 50 hz; • Automatic markers on screen; • 4 different palletes; • Lock and compare feature; • Temperature in °C, °F or K; • Laser pointer; • LED flashlight; • Thermal and visible light videos; • Simultaneous storage of visible light and IR images for video; • Live transmission of video over HDMI or USB; • Included 8 GB micro SD card; • Included card reader for PC; • PC software for image editing and report building included; • Li-Ion batteries with long life; • Internal memory and optional SD card; • Hold image feature.

APPLICATION • Troubleshooting electrical installations and equipment; • Solar farm inspection; • Building and facility maintenance; • Field service; • Energy loss analysis; • Troubleshooting other installations.

• • • • • •

Li-ion battery AC adapter Non-slip strap Carrying case Instruction manual Download link for PC software

TECHNICAL DATA FUNCTION IR sensor resolution Temperature range Thermal sensitivity/NETD Thermal accuracy Field of vision Spectral range Emmisivity Frame rate Focal length Spatial resolution Min focused distance Focus Visible light camera resolution Visible light lens FOV Fusion view Color palettes Display resolution Video format Image format Data storage Data communication IP protection Operation temperature range Storage temperature range Humidity (operation and storage) Drop test Weight Dimensions

Measuring and Regulation Equipment Manufacturer

Accessories 6.38

160 x 120 pxl -20 ... 350°C 0,1°C @ 30°C / 100 mK Higher value ±2°C or ±2 % 25° x 19° 8 ... 14 µm 0.01 ... 1.0 50 Hz 9 mm 2,78 mrad 0.5 m Manual 5 Mpxl 59° yes 4 240 x 320 pxl MPEG-4, 1280 x 960 @ 30fps JPEG, measurement data included 100 MB internal + SD card USB, HDMI IP 40 -15°C ... 50°C -40°C ... 70°C 10% ... 90% 2m 500 g 224 x 77 x 96 mm

6. 35

Thermal cameras

Thermal cameras MD 9910 Thermal camera MD 9910 is a small thermal imager with large ambitions. Frame rate is extremely fast at 50 Hz. 80x80 pixel thermal resolution can show damage on contacts in electrical switchboards or distribution boards, stressed overcurrent or overvoltage protection, or unnecessary friction on motor axle. PCB troubleshooting is made easier by discovering hot spots at close range. At the same time, short focal length allows to go through large areas quickly. Center shot temperature, hot and cold markers give a better sense to the image and its span. Shot images can be immediately transfered to Android device using the app and Bluetooth connection. Span can be set manually to be able to take advantage of its great thermal resolution. Large Li-ion battery allows for 4 to 5h work. It was drop-tested to 2m.

MEASURING FUNCTIONS • Temperature; • Temperature difference.

• Building and facility maintenance;

STANDARD SET

• Field service;

MD 9910 • MD 9910 Thermal camera • USB cable • Non-slip strap • Carrying case • Instruction manual

• Energy loss analysis; • Troubleshooting in other applications

KEY FEATURES • Very fast frame rate 50 hz; • Three markers on screen (hottest, coldest, central); • 5 different palletes; • Lock and compare feature; • Temperature in °C, °F or K; • LED flashlight; • Android apps for Bluetooth connection; • Instant share of image over Bluetooth; • Shooting images from Android app; • Rechargeable Li-Ion batteries with long life; • Internal memory; • Hold image feature.

(pipes, carpentry, windows, etc).

TECHNICAL DATA

• Troubleshooting electrical installations (switchboards, contacts, busbars, etc.); • Troubleshooting electrical equipment (motors, transformers, etc.);

FUNCTION IR sensor resolution Temperature range Thermal sensitivity/NETD Thermal accuracy Field of vision Spectral range Emmisivity Frame rate Focal length Spatial resolution Min focus distance Focus Display resolution Color palettes Data storage Data communication Storage image format IP protection Operating temperature Storage temperature Humidity (storage and operation) Weight Dimensions

6. 36

Accessories 6.38

APPLICATION

80 x 80 pixel -20 ... 380°C 0,1°C @ 30°C / 100 mK Higher value ±2°C or ±2 % 21 x 21° 8 ... 14 µm 0.01 ... 1.0 50 Hz 7,5 mm 4,53 mrad 0.5 m Fixed 240 x 320 pxl 5 100 images Bluetooth Bmp with temperature and emissivity IP 54 -10°C – 45°C -30°C – 55°C < 80% 260 g 180 x 60 x 75 mm

Thermal cameras

Thermal cameras MD 9880 TRMS thermal multimeter MD 9880 is the ultimate troubleshooting tool. Combining essential multimeter functions with thermal viewer, it allows a service provider to quickly locate a wide array of possible faults. Hot spots can be then simply tested with electrical measurement. Thermal view also expands the usefulness of the instrument to other applications in the facility or vehicle, locating leaks, frictions stress and thermal losses.

MEASURING FUNCTIONS

STANDARD SET

• Temperature with cursor on camera; • TRMS DC and AC voltage; • TRMS DC and AC current; • Resistance; • Frequency; • Capacitance; • Duty cycle; • Diode test.

MD 9880 • MD 9880 TRMS thermal multimeter • USB cable

KEY FEATURES • Thermal view; • Automatic and manual range; • Hold and auto-hold modes; • MIN/MAX values capture; • Relative mode; • Peak capture mode; • Temperature in °C, °F or K.

APPLICATION • Troubleshooting electrical installations (switchboards, contacts, busbars, etc.); • Troubleshooting electrical equipment; • Troubleshooting electrical vehicles; • Mid-level electrical testing; • Field service; • Building and facility maintenance; • Energy loss analysis; • Troubleshooting other installations (pipes, carpentry, windows, etc); • Hobby work.

• Carrying case • Measuring probes • Instruction manual

TECHNICAL DATA - THERMAL VIEWER FUNCTION IR sensor resolution Temperature range Thermal sensitivity/NETD Thermal accuracy Field of vision Spectral range Frame rate Focal length Spatial resolution Emissivity Min focus distance Focus Colour palettes IP protection

80x80 pxl -20 – 260°C 0,1°C @ 30°C / 100 mK Higher value ±3°C or ±3 % 21° x 21° 8 – 14 µm 50 Hz 7.5 mm 4.53 mrad 0.01 – 0.99 0.5m Fixed 4 40

TECHNICAL DATA - THERMAL VIEWER - MULTIMETER FUNCTION DC voltage AC TRMS voltage AC + DC TRMS voltage DC current AC TRMS current Resistance/continuity Frequency Capacitance Duty cycle Diode test

Measuring and Regulation Equipment Manufacturer

Ranges Accuracy 400.0 mV … 600.0 V From ±(0.5 % + 5d) to ±(0.8 % + 8d) 4.000 V … 600.0 V From ±(1.0 % + 5d) to ±(2.5 % + 5d) 4.000 V … 600.0 V ±(2.5 % + 5d) 400.0 µA … 10.00 A From ±(1.5 % + 5d) to ±(2.0 % + 8d) 400.0 µA … 10.00 A From ±(2.0 % + 5d) to ±(2.5 % + 8d) 400.0 Ω … 40.00 MΩ From ±(1.0 % + 5d) to ±(2.5 % + 10d) 40.00 Hz … 10.00 MHz From ±(0.2 % + 5d) to ±(0.5 % + 0d) 40.00 nF … 4000 µF From ±(3.0 % + 8d) to ±(3.5 % + 20d) 10.0 % … 90.0 % ±(1.2 % + 2d) Test current <1.5 mA. max open circuit voltage 3.3 V

Accessories 6.38

6. 37

Photo

Part number

Target application

Probe with switch for starting insulation or continuity test.

•

AMD 9028 Alligator clip

Insulated test lead accessory for gripping the measured item.

•

AMD 9026 Test lead with probe, 2 pcs

Test lead with probe, 2 pcs.

•

AMD 1190

Probe caps and metal pins

Probe caps and metal pins.

AMD 9023

Thermocouple probe, type K

Probe for contact temperature measurement.

•

AMD 9024

Adapter for thermocouple probe AMD 9023

Adapter is intended to connect the thermocouple probe with a multimeter.

•

AMD 9025

PC Software for MD 9016 with RS232 cable

Basic downloading software supplied on CD and RS232 communication cable.

AMD 9027

•

Description

Remote probe

AMD 9050 USB interface set

Communication set contains USB adapter, USB and RS232 drivers and PC software on CD.

AMD 9240

PC interface set for MD 9240

AMD 9250

PC interface set for MD 9250

PC interface set enables data transferring to the PC. Set contains optical adapter, cable and PC software on CD.

AMD 9022

Magnetic Hanging Strap

The universal hanger allows you to hang your meter on metal surfaces.

AMD 9030 Spare Li-ion Battery

Spare Li-ion Battery for MD 9930

AMD 9100

Soft carrying pouch for digital mulitmeter storage. Dimensions: 220 x 125 x 70 mm.

Soft carrying pouch

Option

6. 38

MD 9070 MD 9060 MD 9050 MD 9040 MD 9030 MD 9020 MD 9016 MD 9272 MD 9250 MD 9240 MD 9235 MD 9231 MD 9226 MD 9225 MD 9210 MD 1060 MD 1160 MD 9930

Selection Guide for DMM Accessories

Accessories 6.38

•

• •

•

• • •

•

Content Software 1.1 - 1.72 2.1 - 2.46 3.1 - 3.42 4.1 - 4.26 5.1 - 5.16 6.1 - 6.38 7.1 - 7.17

SOFTWARE Selection Guide for Software

7.02

PC SOFTWARE SW 1201 Metrel Electrical Safety Manager (MESM) SW 1203 Metrel SDK SW 0802 PowerView3 SW 0201 PATLink PRO SW 0101 EuroLink PRO SW 0113 HVLink PRO

7.04 7.06 7.08 7.10 7.11 7.12

ANDROID SW 1304 aMESM Android SW 1303 aPAT Android SW 1306 EuroLinkPV Android SW 1308 PATLink Android SW 1307 EuroLink Android

7.13 7.14 7.15 7.16 7.17

Measuring and Regulation Equipment Manufacturer

Software

Electrical Installation Safety High Voltage Insulation / Continuity / Earth / Transformer Appliance / Machine / Switchboard Safety Power Quality Analysis Equipment for laboratories and Schools Multimeters / Clamp meters / Voltage testers / Thermal cameras SOFTWARE

7. 1

Software Selection Guide for Software GROUP

Instrument/Software

SW 1201 MESM

SW 1203 SW 0802 Metrel SDK** PowerView3

SW 0201 SW 0101 PATLink PRO EuroLink PRO

LICENCE

P 1101 (Licence)

P 1104 (Licence)

A 1203 (Licence)

ELECTRICAL INSTALLATION MI 3155 EurotestXD SAFETY MI 3152 EurotestXC

•

MI 3152H EurotestXC 2,5 kV

•

MI 3102 BT EurotestXE

•

MI 3102H BT EurotestXE 2,5 kV

•

MI 3102H SE EurotestXE 2,5 kV

•

MI 3100 SE EurotestEASI

•

MI 3125 BT EurotestCOMBO

•

MI 3108 EurotestPV

•

MI 3109 EurotestPV Lite

•

MI 3144 Euro Z 800 V

•

MI 3143 Euro Z 440 V

•

MI 3121 Insulation / Continuity

•

MI 3121H Insulation / Continuity

•

MI 3122 Z Line-Loop / RCD

•

MI 3123 Earth / Clamp APPLIANCE / MACHINE / SWITCHBOARD SAFETY

•

MI 3325 MultiServicerXD

•

MI 3394 CE MultiTesterXA

•

MI 3394 CE MultiTesterXS NEW

•

MI 3360 OmegaPAT XA

•

MI 3309 BT DeltaGT

•

MI 3311 GammaGT POWER QUALITY ANALYSIS

•

MI 2893 Power Master XT

•

MI 2892 Power Master

•

MI 2885 Master Q4

•

MI 2884 Energy Master XA

•

MI 2883 Energy Master

•

HIGH VOLTAGE INSULATION MI 3252 MicroOhm 100A / CONTINUITY / EARTH / MI 3210 TeraOhmXA 10 kV TRANSFORMER MI 3209 TeraOhmLT 10 kV NEW MI 3201 TeraOhm 5 kV Plus

DIGITAL MULTIMETERS / CLAMP METERS

MI 3290 Earth Analyser

•

MI 3288 Earth Insulation Tester NEW

•

MI 3280 DT Analyser

•

MI 3281 WR Analyser NEW

•

MI 3295 Step Contact Voltage Measuring System

•

MD 9060 Digital multimeter MD 9050 Digital multimeter MD 9040 Digital multimeter MD 9016 Digital multimeter MD 9250 Current clamp MD 9240 Current clamp MD 9930 Thermal camera MD 9910 Thermal camera

7. 2

A 1292 (Licence)

• •

SW 0113 SW 1309 HVLink PRO MIRA

SW 1304 aMESM Android

SW 1303 aPAT Android

SW 1306 SW 1308 EuroLinkPV PATLink Android Android

SW 1307 EuroLink Android

A 1275 (Licence)

P 1102-AND A 1434 (Licence) (Licence)

A 1431 (Licence)

A 1433 (Licence)

SW 1305 aMIRA Android

SW 1310 Data Recording

SW 1311 Data Recording

SW 1312 Data Recording

SW 1313 Data Recording

• • • •

•

•*

•

• •*

•*

•* • •

• • • • •

• •*

• • • •

• • • • • • • • • * Supported by BT dongle. ** Please contact your local distributor or contact person at Metrel for detailed information regarding implementation and distribution of the SDK and blackbox protocol.

Measuring and Regulation Equipment Manufacturer

7. 3

PC Software

Software SW 1201 Metrel Electrical Safety Manager (MESM) The Metrel Electrical Safety Manager is a common application for management of wide palette of Metrel’s electrical safety testers, portable appliance testers, machine testers and industrial safety testers. This application has a unified user interface with the new generation of Metrel’s instruments - same view same meaning. It enables the pretreatment for the measurements, viewing and editing of the measurement results and generation of professional reports. Depending on the instrument model or type, the user can create AUTOSEQUENCEs, custom tests or single tests. They can be integrated into the custom created test structures and then uploaded onto the measurement instrument.

The downloaded measurement results can be viewed, analysed, edited and finally a professional report can be created and printed. These professional reports are predefined templates according to national standards and regulatory organisations where the user enters all the needed protocol data while the measurement results are automatically inserted into the predefined forms. This application is fully compatible with the new generation of Metrel’s multifunction testers, starting with CE MultitesterXA and EurotestXC. With limited functionality some of the predecessor models like EurotestXE or EurotestCombo are also supported.

KEY FEATURES • Common platform for a wide range of Metrel’s instruments: a Windows based application for most of the future Metrel’s instruments. • Multilevel test structure editor: the installation structure can be created in advance on the PC and then simply uploaded to your tester. • Measurement editor: enables definition of tests within the test structure with

7. 4

• •

all parameters and sub parameters. After the structure is uploaded to the instrument, such predefined tests can be selected and started without additional settings. AUTO SEQUENCEs editor: application for easy and efficient preparation of AUTO SEQENCEs or custom tests. Report creator: enables automatic generation of professional test reports which include visual inspections of tested objects and test results in tabular form. Multilingual reports according to local regulations: different languages for the application and reporting are supported. Export of test results: test results in text (.csv) or .xml format can be exported to other programs.

The BASIC Licence allows the user to: • Upload structures with empty or already performed measurements to the measuring device. • Upload and download Auto Sequences (not supported by MI 3152). • Download structures prepared with the measuring device (e.g. MI 3152) to MESM.

• • • •

Download measured data to MESM. Print results and create a basic report. Upgrade FW on the device. Synchronize Licences between the measuring device and the PC.

The PRO Licence allows the user to: • Perform all operations as described above for BASIC Licence. • Print professional reports. • PRO export to Excel. * Fully featured export to Excel * Integrated SDK and Black-box protocol.

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

Custom Auto Sequence(R), or a group of them can be created on PC SW and uploaded to the instrument.

User defined structure with measurements and limits can be created on PC SW and uploaded to instrument.

User can define several different databases, containing information about Contacts, Structure names and Custom Lists.

Measuring and Regulation Equipment Manufacturer

7. 5

PC Software

Software SW 1203 Metrel SDK

BLACK-BOX PROTOCOL

Bluetooth

USB

Ethernet

ION SDK

The Metrel SDK communication capabilities.

SDK CAPABILITIES

SDK SUPPORTED FUNCTIONALITIES

• SDK enables access to all measurements on all new generations of Metrel instruments in case the whole database is coupled with the Ion SDK. • It is possible to get access to only a subset of Metrel instruments. In this case the SDK is compiled with a database subset. The SDK compiled in such a way will be able to recognize only the measurements of supported instruments. • If required, Metrel may decide to add new instruments. In this case the customer would obtain a new version of the SDK with added instruments and measurements in the SDK database.

The SDK supports the following functionalities: • Get basic instrument information. • Instrument Firmware update check (check-fw). • Lists, uploads/downloads workspaces in a file or on an instrument. • Measurement upload/download based on the SDK included database. • Auto Sequence® upload/download based on the SDK included database. • Black-Box protocol for online communication with portable appliance testers. 2 (footnote) • Structure object creation. • Empty measurement creation. • Export to XML. • Exports workspace data to selected target. • Licence upgrade. • The SDK recognises: the licence, the profile and the workspace. • SDK comes together with a mini demo GUI and DataDisplay Framework Visualizer which also supports exporting data to XML. • The export to XML function also

7. 6

The advanced communication protocol SDK is an interface for data communication with Metrel new generation test instruments and can be used to conveniently download and upload projects and Auto Sequence®s. The SDK itself is a set of subroutine definitions, protocols, and tools for building application software. It is intended for those who want to develop software using .NET platform and need to interface with Metrel instruments.The Metrel Instrument Communication SDK bundles client libraries for accessing Metrel instruments and provides a unified programming interface using C# programming language. The SDK includes a set of API calls which makes communication with Metrel instruments simple for the user. It provides a way to manipulate data from instruments using a generic data model and makes available a set of rules for extracting and viewing data.

exports the XML scheme, which the programmer may use for creating POCO (Plain Old Common language runtime Object) objects in various programming languages. • Supports Command Line Interface CLI (calls) and includes CLI help. • Black-Box protocol for remote communication via Ethernet, RS232, USB or Bluetooth. • The Metrel Electrical Safety Manager (MESM) uses the SDK for communication with Metrel instruments.

Preparing a structure with measurement in Metrel SDK DemoApp. 1

Basic instrument information obtained via Metrel SDK DemoApp. 1

THE BLACK-BOX PROTOCOL SDK enables easier handling of Metrel’s communication protocol called the Black-Box protocol (BB protocol). The BB protocol may be enabled or disabled via the Metrel SDK library. With it a two-way communication intended for controlling an instrument as a Black-Box is enabled. The BB protocol is a system of rules that allows a PC as a master to start communication by sending the request command to the instrument, which answers according to the protocol. This enables hands free operation as the control over the tester is delegated to an automatized system. The BB protocol solution is primarily suitable for automatized production line testing, but has found its use in other applications such as portable appliance testing and in some rare cases also in electrical installation safety testing.

The Black-Box demo enables the user to start an Auto Sequence® from the tester remotely and it enables an automatic print out of the test report after the Auto Sequence® is completed. The Black-Box protocol is also designed to be used with other PC SW engineering tools such as Visual Basic, C++ and LabView, which, with some effort, can be used to perform remote communications between your computer and test instrument, as well as gather and store data for later analysis. However, if you simply wish to manually enter one command at a time through a communication port (Ethernet, RS232, USB or Bluetooth), a communications package, such as HyperTerminal, can be very useful. Although the Black-box protocol may be used independently of the Metrel SDK we strongly advise to use it through the Metrel SDK. Using the Metrel SDK will shorten the development time and decrease the development effort.

For presentation purposes Metrel has developed a PC SW application called BlackBox Demo, which allows remote control over the tester via different communication ports (Ethernet, RS232, USB or Bluetooth).

Measuring and Regulation Equipment Manufacturer

POSSIBLE BUSINESS MODELS Metrel proposes three types of business models. For each business model the way support is handled differs. The models are: • Enterprise SDK • Professional SDK • Basic SDK • SDK as a service (SDKaaS)

ADDITIONAL INFORMATION AND DISTRIBUTION Please contact your local distributor or contact person at Metrel for detailed information regarding implementation and distribution.

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 7

PC Software

Software SW 0802 PowerView3 PowerView3 software is a powerful platform for downloading, analysing recorded data and creation of power quality test reports. PC Software contains a package of functionalities needed for profound evaluation of power quality phenomena, data comparison and creation of complex test reports. It works in conjunction with Metrel new generation power quality analysers. For the instruments equipped with GPRS functionality PowerView3 enables remote control of the instrument as well.

KEY FEATURES • User friendly interface: wide range of quick buttons, possibility to customize the environment by dragging, docking and resizing the window tabs. • Structure: downloaded data is organized into Windows Explorer-like tree structure. • “Drag and drop”: downloaded data can be easily organized into multiple sites and sub-site locations. • Data filtering: data in a structure can be grouped by quantity or by phase. • Views: depending on selected record type, different views are available (Record Information view, Trend Chart view, Table view, Waveform Scope view, Voltage Quality view, etc.) • EN 50160 analysis: automatic voltage quality analysis in compliance with custom or predefined EN 50160 Power Quality criteria and quick report printing. • Chart zoom: chart can be zoomed depending on selected in a table value range.

7. 8

• Remore control: via GPRS communication remote handling of the instrument and its data can be executed. • GPS synchronization: simultaneous measurement on the different network points by using 2 or more synchronized instruments. • On-line monitoring: when instrument is connected with PC, real-time observing of signals and parameters is possible via PowerView3 while instrument is measuring / recording in the background. • Export of test results: test results can be filtered and exported to other programs (MS Excel, MS Word,CSV, TXT). • Reports: automatic generation of test reports from the selected views and data with attached graphs according specific standards/national specification, like: IEEE 519, GOST 32144/33073, Energy report, Energy demand report • SW update: PowerView3 checks for new versions of the application and downloads updates from the Internet if necessary.

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

Logged data can be analysed according to custom or predefined EN 50160 Power Quality criteria

Results can be represented in both trend and table view simultaneously for easier analysis

Selected data can be organized into multiple tabs for easier interpretation

Measuring and Regulation Equipment Manufacturer

7. 9

PC Software

Software SW 0201 PATLink PRO PC software PATLink PRO is an advanced, user friendly software package designed with the portable appliance testing engineer in mind. The graphical interface with drag and drop data relocation, data filtering, data archiving functions and automatic report generation allows a variety of users with a range of different skills and abilities to create professional reports which include company logos. The PATLink PRO Plus software introduces extra features including the ability to reload data onto Metrel uploadable / downloadable testers, perform trend analysis on equipment and introduces PRO Plus certificates and individual appliance reports.

KEY FEATURES • Full data filtering: All data can be filtered by different parameters: Retest Date, Test Date, Project, User, etc. • Tree style or table style: Data can be represented in tree or table view. • Drag and drop: The elements of the structure can be relocated and renamed. • Customer database: It allows test engineer to create his own database of customers fully equipped with all appropriate data. • Company logo loading: Load company logos into the software so that they can be printed on test reports. • Data backup: All downloaded data can be backed up to prevent the loss of valuable data for example in case of hard disk failure. • Appliance information editing: Allows you to edit data, e.g. to set up Retest Date, Repair Code, add Comments, etc. • Export of test results: Data of selected appliances together with test results can be exported to other programs (MS Excel, MS Word). • PDF report: Test Report can be transformed into PDF format. • Full built-in help files: Integrated help

7. 10

•

• •

•

• • •

menu contains detailed explanation of PC SW handling. Automatic self-test record keeping: Results of the CHECKBOX function (MI 3311 only) can be automatically transferred to the PC and printed onto the test reports. “Plug & Play”: When meter is connected to the PC it is automatically recognized by the software. Upload data back to GT tester: User can upload test results from the previous measurement session (e.g. from last year) so the same tests can be simply repeated and results of both measurements can be compared. Autosequences upload: Test autosequences can be prepared via PATLink PRO and then sent to the tester (MI 3309, MI 3311) for testing speedup. Structures upload: The structure of test site can be created in advance on the PC and then simply uploaded to the tester; if needed any deviations can be adjusted on the tester on site. Trend analysis: Enables to compare test results of the last and previous tests. Automatic PRO report generation: Enables automatic generation of Test Report (standard or full detailed). PATLink PRO Plus professional reports:

The PRO Plus report displays results as the PRO version but enables editing the information before printing the report. The following Certificates for PRO version are available: • Full detailed PRO Electrical equipment test report; • METREL PAT PRO Electrical equipment test report. The following Certificates for PRO Plus version are available: • METREL PRO Plus (Single) Electrical equipment test report; • METREL Full detailed PRO Electrical equipment test report; • METREL PAT PRO Plus Electrical equipment test report.

ORDERING INFORMATION • A 1305 PC SW PATLink PRO with USB and RS232-PS/2 cable

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

PC Software

Software SW 0101 EuroLink PRO Plus The EuroLink PRO / PRO Plus software works in conjunction with Metrel’s downloadable installation testers. The software automatically finds the instrument and allows the test engineer to download test results saved on the instrument, review the results, relocate test results (if required), print test reports and print installation structures for storing in the distribution board. With the more advanced Metrel installation testers, structures can be built with the software and uploaded to the instrument for easy installation navigation while performing on-site testing. Additionally the EuroLink PRO Plus software offers the ability to automatically generate professional PRO Plus Reports.

KEY FEATURES • Automatic recognition of the instrument: when connecting your instrument to the PC it is automatically recognized by the software. • Simple graphical visualisation of the installation structure: enables graphical representation of the tested installation which makes it easy to navigate in the installation. • 10-level structures: in conjunction with MI 3105 and MI 3101 PC software enables creating the electrical installation structures with up to 10 levels and 4 levels for other models. • Rearranging of structures: the elements of the structure can be relocated and renamed. • Installation structures printing: structures can be printed and stored in the distribution board for easier later identification of the installation elements. • Structures upload: the installation structure can be created in advance on the PC and then simply uploaded to your tester.

• Export of test results: test results in text format can be exported to other programs (MS Excel, MS Word). • Automatic PRO Test Report generation: enables automatic generation of PRO Test Report (low, medium and high detailed). • Automatic PRO Plus Test Report generation (PRO Plus version only): enables automatic generation of PRO Plus Test Report which include visual inspection of tested object and test results in tabular form. • Suport of EuroLink Android: supports extended file format from EuroLink Android app. Key features of PRO Plus Test Reports: • Downloaded test results are automatically inserted onto PRO Plus forms. • Allows to fill out visual inspection form for tested fuse cabinet or earthing system. • Automatically selects worst case test results for form completion. • Easy test report generation and reviewing facilities.

Measuring and Regulation Equipment Manufacturer

Eurolink PRO Plus enables creation of the following test reports: • PRO Plus Test Report • NICEIC certificates (UK) • ZVEH certificates (Germany) • SiNa certificates (Switzerland) • ÖVE certificates (Austria) • HD 384 certificates (Greek) • KEHE certificates (Greek) • GOST R 50571 (Russia) • UNE – 202008 certificates (Spain)

ORDERING INFORMATION • A 1291 PC SW EuroLink PRO with USB and RS232-PS/2 cable • A 1290 PC SW EuroLink PRO Plus with USB and RS232-PS/2 cable • A 1292 Upgrade code EuroLink PRO to EuroLink PRO Plus

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 11

PC Software

Software SW 0113 HVLink PRO The HVLink PRO software works in conjunction with Metrel newest HV insulation testers, Step Contact Voltage Measuring System and MicroOhms. The software automatically recognizes connected instrument and allows the customer to download test results saved on the instrument, review the results, rename and relocate data if needed and print test reports.

KEY FEATURES • Automatic recognition of the instrument: when connecting your instrument to the PC it is automatically recognized by the software. • Tree view: all the results are represented in tree view for easy data management. • Rearranging of structures: the elements of the tree structure can be relocated and renamed. • R(t) graphs: if graph R(t) was enabled when testing with the instrument MI 3201 then it can be plotted and printed with the software.

7. 12

• Measurement tables: if graph R(t) was enabled when testing with the instrument MI 3201 then a table with fixed R(t) values can be viewed and printed. • Export of test results: test results in text format can be exported to other programs (MS Excel, MS Word). • Automatic Test Report generation: enables automatic generation of Test Report (low, medium and high detailed).

ORDERING INFORMATION • A 1275 PC SW HVLink PRO with USB and RS232-PS/2 cable

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

Android

Software SW 1304 aMESM Android The aMESM is an advanced electrical installation safety Testing tool for Android devices. It enables fast and simple data management of tested installations, as well as a quick overview of already performed tests. The Application enables the user to send results to the office before leaving the test site and enter and save data to the test instrument by using the smart phones’ keyboard. It enables creation of customer and test location database as well as adding text and pictures, videos or voice records to the specific position in the test structure. All these features enable the user faster and easier data handling.

KEY FEATURES • Complete database of tested installations in one location; • Easy data entering; • Projects can be stored to your drop box account; • Sending data to the main office before leaving the test site; • Overview of testing parameters; • Adding text, picture, video or voice records to test results; • Creation of customer and test location database. • Creation of a simple PDF test report. • Remote starting of tests on MI 3143 Euro Z 440 V and MI 3144 Euro Z 800 V.

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

Measuring and Regulation Equipment Manufacturer

7. 13

Android

Software SW 1303 aPAT Android The aPATLink Android is Advanced Portable Appliance Testing tool. It enables fast and simple data management of tested appliances, as well as a quick overview of already performed tests by simply scanning a QR code. The application enables the user to send results to the main office before leaving test site, enter and save data to the test instrument by using a Smart phones’ keyboard. Also it enables a creation of the custom made database for portable appliances’ ID’s, the appliances’ names and the appliances’ locations. All these features enable the user a faster and easier data handling.

KEY FEATURES

ADDITIONAL FEATURES

COMPATIBILITY

• Complete database of tested appliances on one location; • Upcoming retest warning on your smart phone or tablet; • Simple, custom auto-test creation; • Use of smart phones barcode or QR code scanner for quicker data entry; • Remote control of GT tester; • Easy data entering; • Projects can be stored to your drop box account; • Sending data to main office, before leaving test site; • Built in risk assessment calculator; • None skilled user can perform test simply by scanning the QR code containing all needed information for specific appliance; • Overview of testing parameters by simple scanning QR code.

• In Built Risk Assessment tool to provide correct Re-Test periods in accordance with COP version 4; • Protect your business by applying QR codes instead of Bar Codes.

• Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 14

Android

Software SW 1306 EuroLinkPV Android The EuroLinkPV Android is a data management tool for android tablets and smart phones. It is used at the site of testing together with Metrel’s Photovoltaic testers as a measurement pre- and postprocessing tool. It enables the wireless communication between instrument and Android device. With this application testing of PV is more comfortable and effective.

KEY FEATURES • View the results of the I/V measurement in graphical or numerical form. • Compare the results with the nominal values and characteristic. • Edit the module data stored in instrument memory using the Android Keyboard. • Edit the module list stored in instrument memory.

• The module data can be selected from the huge module Data Base delivered within the EuroLinkPV Android application. • It supports Bluetooth dongle enabling a communication channel between the below listed measuring instruments and a smart phone or a tablet with Android OS and installed application EuroLinkPV Android.

Measuring and Regulation Equipment Manufacturer

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 15

Android

Software SW 1308 PATLink Android The PATLink Android is a powerful tool. It enables fast and simple data management of tested appliances, as well as a quick overview of already performed tests by simply scanning a QR code. The application enables the user to enter and save data to the test instrument by using a Smart phones’ keyboard. Also it enables a creation of the custom made database for portable appliances’ ID’s, the appliances’ names and the appliances’ locations. All these features enable the user a faster and easier data handling. PATLink Android enables the user to scan the QR codes which contain information of the previous results, the test status, and the previously used test sequence. Based on this information the user can start the retest of the appliance with a single press on the Android application.

KEY FEATURES

ADDITIONAL FEATURES

COMPATIBILITY

• On - site comparison of the test results; • Creation of the custom database; • Use of Smart phones camera for the QR and Barcode scanning; • Use of Smart Phones virtual keyboard.

• In Built Risk Assessment tool to provide correct Re-Test periods in accordance with COP version 4; • Protect your business by applying QR codes instead of Bar Codes.

• Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 16

Android

Software SW 1307 EuroLink Android The EuroLink Android is a data management tool for android tablets and smart phones. It is used in the field together with Metrel’s Electrical Installation Safety testers to serve as a measurement pre- and postprocessing tool. It also enables the wireless communication between instrument and Android device on one side and bunch of wireless communication methods between Android device and PC.

KEY FEATURES • Attach notes, Photographs, Audio or Video Files! • Create Structure of Electrical Installation at the site. • Upload Structure of Electrical Installation to your test instrument • Download measurement results to EuroLink Android application.

• Transfer Data, Share files or Send them through your Tablet or Smart Phone Tools to your Office for further manipulation. • It is compatible with EuroLink PRO and EuroLinkPRO Plus PC SW. • It supports Bluetooth dongle or built-in BT enabling communication channel between the below listed measuring instruments and a smart phone or a tablet with Android OS and installed application EuroLink Android.

Measuring and Regulation Equipment Manufacturer

COMPATIBILITY • Consult the Selection Guide for Software on page 8.2 for detailed information about compatibility with selected test and measurement instruments.

7. 17

METREL d.d. Measuring and Regulation Equipment Manufacturer Ljubljanska 77, SI-1354 Horjul, Slovenia T +386 (0)1 75 58 200, F +386 (0)1 75 49 226 info@metrel.si, www.metrel.si

Distributor:

Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.

7. 18

GENERAL_2022_Ang_March

Metrel General Catalogue_2022

Articles inside

Selection Guide for Single-functional Testers 1

MI 3152 EurotestXC 1

Selection Guide for Multifunctional Testers 1

A 1532 XA EVSE adapter 1

MI 2088 Earth Insulation Tester 1

MI 2093 Line Tracer 1

MI 3155 EurotestXD 1

A 1199 Ro - Adapter 1