Configurator PRIMERGY CX400 M4 - Fujitsu CX400 M4 System configurator and order information guide Edition 2018/05/10 Rack version for 19'' racks with 2 height units No PSU included

8

10

CPURAM

List of content, Instructions for usage of this configurator, abbreviations

describes base unit of CX400 M4Description System Description for easier understanding

describes rack mount kits and services

6GFX Graphics-, Grid-cards, GPU and Xeon Co processors and

other graphics optionsHD_cage

16 System Management, ATD, RS232 port, TPM module

LTO drives & RDX drive

BasePower supply units, power cables, country specific opt.3

PRIMERGY CX400 M4Multi Node Server

1

7

5

LAN ComponentsFibre Channel ControllerInfiniband Controller

optical disk drives (DVD, DVD-rw, Blu ray)

Storage drives - PCIe SSD - SAS/SATA SSD & HDD

Order code and Infos of E5-26xxv5 series processorsDDR4 System memory (RAM) and memory modes

Drive cage and PCIe riser optionsSAS / RAID Controller and components

Chapter

4

2

FolderCover

LAN_FC_IB

Content

Backup

RAIDODD

HD_SSD

9

14

111213

Keyboards, Mice, USB devices15othersUSB_devices

<-- order code E-part (bold) --

<-- order code L-part (bold)

<-- "name" of this part

<--description of this part, in same cases as well description of content

<--requires a free PCIe slot --> means total amount of PCIe slots reduced

<--indicates how often this part can be configured in the related Server

For further information see:

(internet)

(extranet)

Chapter xx - description of chapter

Fujitsu is providing the content of this document with very high accuracy. In case you identify a mistake, we would kindly encourage you to inform us. We kindly ask for understanding, that errors still may occur and that Fujitsu may change this document without notice

InstructionsThis document contains basic product and configuration information supporting you in more complicated configurations.

In any case we recommend to use the PC-/SystemArchitect to make sure, that you configure a valid system.

This System configurator is divided into several chapters. They are identical to the current price list and PC-/SystemArchitect.

Please follow this document step by step from the top to the bottom.

PCIe Gen2 x4 full height card

max. 6x per system

Text fields with grey color offer extra information for related topics (e.g prerequesites, technical back ground, configuration rules, limitations, …

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/default.aspx

S26361-F4610-E2

PLAN 2x1Gb Ethern. Controller

i350-T2 chip (based on Intel Powerville) offers 2x1Gb RJ45 connectors

S26361-F4610-L3

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/default.aspx

AbbreviationsSAS Drives, RAID Serial attached SCSI Device (HDD, SSD, LTO drives); SAS2.0 = 6GBit/s; SAS3.0 = 12GBit/s

SSD Drives Solid state disk (Non volatile storage device), 2.5" (SFF)

SFF Drives small form factor (=2.5")

SATA Drives, RAID Serial ATA (HDD, SSD) current SATA speed = 6GBit/s

HDD Drives Hard disk drive (Non volatile storage device), 2.5" (SFF) or 3.5" (LFF)

RAID Drives, RAID RAID 0 = max speed, RAID 1 = mirroring, RAID 5 = 1 out of x drives is spare

Spaces OS Microsoft spaces, optimized in Win2012 R2 offers software RAID and storage tiering

LFF Drives large form factor (=3.5")

CPU Processor central processing unit ("processor")

optical disk drive (i.e. DVD-player, DVD-burner, Blu ray player, blu ray burner)

E-Part "Einbau-Part" "e.g. S26361-F1234-E240" ordercode with "E" means it is either integrated into to Server (CPU, Mem, ..) or integrated in the shipping box (Keyboard, Mouse, ..)

L-Part "Lose Lieferung-Part" "e.g. S26361-F1234-L240" ordercode with "L" means, the part will be shipped with extra package, may be as well with extra shipment

vSAN OS

storage tiering RAID offers optimized storage allocation (fast area for "hot data"; slower area for "cold data")

OS operating system OS=operating system - required for running, organize and administrating the server

hot data Drives Data which are currently being processed

cold data Drives Data which are currently not processed (only stored)

ODD Drives

PRIMERGY CX400 M4 System configurator and order information guide

Edition2018/05/10

HDD less configuration for Node CX2550/CX2560/CX2570 M4

Front HDD bay option enabled configuration for Node CX2560 M4

Each CX2560 M4 use up to 6 drives (respective Slot 1-4)


Each CX2550 M4 use up to 2 drives (respective Slot 1-4)


Each CX2570 M4 use up 6 drives (respective Slot 1, Slot 3)

Node CX2550 / CX2560 M4 CX2570 M4

CX400 M4 Front view

CX400 M4 Rear View

No mixture with different type of server nodes are not supported.

cnfgCX400M4_CX25x0M4.xlsx Description Page 4 of 44


Edition2018/05/10

Installing condition* by configuration of Power Supply Unit*PSU redundancy (1+1) support depends on the configuration of server, please check the total power consumption

in SystemArchtect for making PSU redundant configuration

** No mixture of CX2550 M4 Air Cooling / CX2550 M4 Liquid Cooling / CX2560 M4 /CX2570 M4 Air Cooling / CX2570 M4 Liquid Cooling in one chassis must not be allowed.

Air Cooling Liquid Cooling

2 AC 100VUp to two nodes with

below 150W CPU

Up to two nodes with

below 150W CPU

Up to two nodes with

below 130W CPU

2 AC 200VNo configuration

limitationUp to 165W CPU Up to 130W CPU

1 AC 200VUp to three nodes with

below 150W CPU

Up to three nodes with

below 150W CPU

Up to three nodes with

below 130W CPU


limitation

No configuration

limitation

No configuration

limitation

1600W PSU

2400W PSU

CX2560 M4CX2550 M4

Power Supply Unit Number of PSU Input Voltage

PCIe card / Air Cooling SXM2 / Liquid Cooling

2 AC 100V Up to 1 node No support


limitationUp to 1 node

1 AC 200V Up to 1 node No support


limitation

No configuration

limitation

CX2570 M4Power Supply Unit Number of PSU Input Voltage

1600W PSU

2400W PSU

cnfgCX400M4_CX25x0M4.xlsx Description Page 5 of 44


Edition2018/05/10

Rack version for 19'' racks with 2 height units

No PSU included in base unit Front HDD cage kit must be ordered under node config

Basic unit is without node Please refer to "HD_cage" sheet

Basic units for CX2550/CX2560/CX2570 M4 LC

0-24x 2.5" HDD bays

For EMEIA market S26361-K1614-V100

For APAC/US market S26361-K1614-V300

Up tp 4 x CX2550/CX2560 M4, Up to 2x CX2570 M4 LC

Basic units for CX2570 M4 AC

0-24x 2.5" HDD bays S26361-K1614-V200

Up to 2x CX2570 M4 AC In case of front HDD is used

Bridge board for HDD Loose delivery

In case of HDD less configuration Bridge board for HDD

S26361-F5651-E180 S26361-F5651-L180

1x per CX400 M4

VGA/USB Dongle Loose delivery

Y-cable VGA/USB Y-Dongle cable

S26361-F5651-E310 S26361-F5651-L310

* * At least 1x dongle cable

is required per customer

site

In case of liquid cooling

Liquid cooing requires PCR M2 Rack LC Tube for CX2550 M4 LC Tube for CX2550 M4

(800mm wide / 1200mm depth / 42U) S26361-F5651-E200/L200 S26361-F5651-E210/L210

For RackCDU, please select below rack 1x per CX400 M4 1x per CX400 M4

S26361-K828-V942 LC Tube for CX2580 M4 LC Tube for CX2580 M4

LC Tube for CX2570 M4 LC Tube for CX2570 M4

Chapter 1 - Base unit

Start

Power supply units & coolingThe PRIMERGY CX400 M4 offers bays for 1x or 2x direct attached hot plug (opt. redundant) power supply units of 1,600W, 2400W with up to 94% efficiency. The PRIMERGY CX400 M4 supports high performance hot plug fans (N+1 redundant).Server ManagementiRMC S5 (integrated Remote Management Controller) on-board with dedicated (or shared) 10/100/1000 Service LAN-port and integrated graphics controller. With the integrated onboard indicators and controls you can easily highlight failed components via LEDs. The LEDs can be displayed during service even without mains connection by simply pressing the "indicate CSS" button.Platform

* ServerView Suite Software incl. ServerStart, ServerBooks, Management Software and Updates

For RackCDU For Internal RackCDU

item CX2560 M4 CX2550 M4 CX2570 M4

Use Case Allround (cloud) HPC HPC / VDI

Form Factor (Height x Width) Single x Half (4N) Single x Half (4N) Double x Half (2N)

# of CPU/Node 2 2 2

# of UPI 3 3 3

Liquid Cooling - Yes (option) Yes (option)

CPU (W) 150W165W

(205W: liquid cooling)

150W

(205W: liquid cooling)

# of DIMM 16 16 16

# of 2.5”/3.5” HDDs (/ chassis) 24/0 8/0 12/0

# of 2.5” HDDs (/ Node) 6/6/6/6 2/2/2/2 6/6

# of HDD / Type

(included)

6x SAS/SATA

(2x PCIex4)2x SATA

6x SAS/SATA

(2x PCIex4)

# of 3.5” HDDs (/ Node) - - -

PCIe slot (type) 2 (Gen3 x16, 25W) 2 (Gen3 x16, 25W) 1 (Gen3 x16, 25W)

GPU slot - - 2x (Gen3 x16)

TPM slot / MicroSD for BMC 1 / 1 1/1 1 / 1

Internal boot device

USB mirrored device 1 1 1

# of M.2 slot 2 2 2

Form Factor 2242 2242 2242

M.2 I/F type SAS / PCIe(Gen3)x2 SAS/PCIe(Gen3)x2 SAS / PCIe(Gen3)x2

BMC (IPMI) LAN 1x 1000 Base-T 1x 1000 Base-T 1x 1000 Base-T

Onboard NIC 1x 1000 Base-T 1x 1000 Base-T 1x 1000 Base-T

1x OCP Mezz slotPHY (selectable NIC option)

4x 1000Baset-T

2x 10G Base-T

2x 10G SFP+

4x 10G SFP+

-

4x 1000Baset-T

2x 10G Base-T

2x 10G SFP+

4x 10G SFP+

PCIe PCIe Gen3 x16 PCIe Gen3 x16 PCIe Gen3 x16

cnfgCX400M4_CX25x0M4.xlsx Base Page 6 of 44


Edition2018/05/10

Liquid cooling has no support mixed S26361-F5651-E220/L220 S26361-F5651-E230/L230

node configuration 1x per CX400 M4 1x per CX400 M4

LC Tube for CX2560 M4 LC Tube for CX2560 M4

S26361-F5651-E200/L200 S26361-F5651-E210/L210

1x per CX400 M4 1x per CX400 M4

Special release Special release

for CX2560 M4 for CX2560 M4

Basic units for CX2560 M4 Basic units for CX2550 M4 LC

0-6x 2.5" HDD bays S26361-K1617-V100 0-2x 2.5" HDD bays S26361-K1618-V200

Up to 4x per CX400 M4 Up to 4x per CX400 M4

Basic units for CX2550 M4 Basic units for CX2570 M4 LC (SXM2)

0-2x 2.5" HDD bays S26361-K1618-V100 0-6x 2.5" HDD bays S26361-K1616-V500


Basic units for CX2570 M4 (PCI) Dummy node (Half wide, 1U)

0-6x 2.5" HDD bays S26361-K1616-V100 S26361-F5651-E150/L150


Dummy node (Half wide, 1U) Basic units for CX2560 M4 LC Special release

S26361-F5651-E150/L150 0-2x 2.5" HDD bays S26361-K1617-V200


Empty slots must be filled

by the dummy nodes.

Dummy node (full wide, 1U)

Up to 1x per CX400 M4 Basic unit for CX2570M4 (SXM2)always 4x SXM2 required

S26361-F4575-E11 S26361-F4575-E21

Service for CX-Server nodes CX-Server nodes individually

installation in the CX400 packed/deliverd for CX400

HDD cage standard HDD cage standard

max. 4x per system unit max. 1x per CX-Server node

B



Edition2018/05/10

as soon as available

Pleaese refer to "Installing condition by configuration of Power Supply Uniton "Description" page

2.400W (S26113-F620-E30) must use Power Cord 16A (S26361-F3151-E301)

for CX400 M4 within rackplease choose only 1 of this 2 cables

S26361-F3151-E351 S26361-F3151-E301 S26361-F3151-E500 T26139-Y3850-E10

Power Cord 10A Power Cord 16A Power Cord No Power Cord

IEC 320 C19 -> C14 IEC 320 C19 -> C20 IEC320 C19 ->

US NEMA L6-20p

default within rack for 100V-115V only*) without rack only without rack only *) in System architect please

1x per PSU 1x per PSU 1x per PSU 1x per PSU change the default 16A connection

to a 10A connection for all PSU

S26361-F3151-E301100-120V / 200-240V

100-120V /200-240V

closes hot plug PSU slot

max. 1x per system

1600W PSU 2400W PSU

S26361-F3151-E351 200-240V Not supported

Dummy modulefor closing the 2nd PSU hole, in case only 1 PSU is equipped

1600W PSU module platinum 1st or 2nd PSU for redundancy. 94% efficiency

2400W PSU module platinum 1st or 2nd PSU for redundancy. 94% efficiency

100-240V, 50-60Hz 100-240V, 50-60Hz

occupies hot plug PSU slot occupies hot plug PSU slot

min. 2 / max. 2x per system min. 1 / max. 2x per system

S26361-F5651-E190

S26361-F5651-L190

Dummy module instead PSU

1600W platinum power supply unit 2400W platinum power supply unit

Chapter 2 - Rack architecture

PRIMECENTER Rack

Rack Architecture Remark

Rack Cable Arm 2U 1x Cable mgmt. arm for 2U S26361-F5651-E100 S26361-F5651-L100

Required in case of hotplug FAN operaiton

Chapter 3 - Power supply unit, power cable, country specific options

S26113-F617-E50 S26113-F620-E30

S26113-F617-L50 S26113-F620-L30



Edition2018/05/10

S26361-F4530-E12 S26361-F4530-E10 S26361-F2735-L10

Mounting 2U server in Mounting in Adapter angle PC/DC-Rack, till 50Kgasymmetrical racks symmetrical & 3rd party racks necessary for mounting RMKs in

with 2U support bracket (no support bracket needed) asymmetrical racks

SNP:SY-F1647E301-P

Installation ex works for one

server or subsystem.

Hereby the rack will be delivered "Rack-mounting ex factory"

completely pre-mounted and This service is to be ordered once

all wired connections are tested. per installable server/storage

With PCR M1 16U, 24U, 42U: subsystem, in order to get the

Systems and components server/storage subsystem

will be delivered installed in the rack mounted into the racks. In case of

not-installed server and subsystems

this service has to be ordered,

to get the mounting kits and the

To be ordered only together with cables installed.

a PRIMECENTER rack

refer PCR S2 or M1 rack configurator

for air cooling

refer to M2 rack configurator

for liquid cooling

max. 1x per System

S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130

REGION KIT APAC/EMEA/India REGION KIT JP REGION KIT America

For Shipments to EMEA / Asia For Shipments to Japan regions For Shipments to America region

and Pacific regions

1x per system 1x per system 1x per system

A



X X

X X

X X

X X

X X

X X

X X

X X

Xeon Gold 5118 12C 2.3GHz 105W X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

B1

Xeon Gold 6142M 16C 2.6GHz 150W S26361-F4051-E342 S26361-F4051-L342

Xeon Platinum 8100M - Advanced (1.5TB p. Socket)

64-bit Intel Xeon processor supporting HT*, DDR4 @ 2666 MHz & QPI Bus @ 10.4 GT/s

Xeon Platinum 8160M 24C 2.1GHz 150W S26361-F4051-E360 S26361-F4051-L360

Xeon Gold 6100M - Advanced (Shelf 4; 1.5TB p. Socket)




Xeon Platinum 8160 24C 2.1GHz 150W S26361-F4051-E160 S26361-F4051-L160


Xeon Gold 6142 16C 2.6GHz 150W S26361-F4051-E242 S26361-F4051-L242

Xeon Platinum 8100 Advanced (Shelf 4)







Xeon Gold 6152 22C2.1GHz 140W S26361-F4051-E152 S26361-F4051-L152

Xeon Gold 6100 - Frequency Optimized (Shelf 4)





Xeon Gold 6100 - Advanced (Shelf 4)










S26361-F4051-E118 S26361-F4051-L118

Xeon Silver 4100 - Frequency Optimized (Shelf 2)


Xeon Silver 4112 4C 2.6GHz 85W S26361-F4051-E212 S26361-F4051-L212





Xeon Bronze 3100 - Basic (Shelf 1)

64-bit Intel Xeon processor supporting DDR4 @ 2133MHz & QPI Bus @ 9.6 GT/s

Xeon Bronze 3104 6C nHT 1.7GHz 85W S26361-F4051-E104 S26361-F4051-L104


Chapter 3 - CPU (CX2560 M4)

B

BaseUnitThere are 2 processor sockets available. Please configure 1 or 2 Processors.

>> All processors have to be the same type.

>> With one processor LOM, iRMC and 8x DIMM slots are available

>> With two processors all 16x DIMM slots are available.

>> If 128GB memory modules are required CPU "M" SKU is necessary

>> To configure 2nd CPU an additional cooler kit is required.

>> Empty CPU slot have to be filled up with a CPU Dummy! * HT = Hyper Threading

Restriction for CPUs above 150W TDP:

Ambient temperature requirement for CPUs between 150W and 165W TDP is 30℃

CPUs above 165W TDP require a liquid cooled base unit

Liquid cooling base unit requires always 2 CPUs

Stan

dard

(S2

6361

-K16

17-V

100)

Spec

ial r

elea

se |

Liq

uid

Coo

led

(S2

63

61

-K1

61

7-V

20

0)

Xeon Silver 4100 - Standard (Shelf 2)

64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus 9.6 GT/s


cnfgCX400M4_CX25x0M4.xlsx CPU_CX2560 Page 10 of 44


X X

X X

X

S26361-F4051-L950 X

Cooling Kit 2nd CPU S26361-F3849-E100

Cooling Kit for 2nd CPU (upgrade option for Standard BU)

C

Xeon Gold 5100 - Embedded (Shelf 3)


Xeon Gold 5119T 14C 1.9GHz 85W S26361-F4051-E419 S26361-F4051-L419

Cooler Kit (see comment above; for upgrade please use according kit to the selected CPU)

B1

Xeon Silver 4100 - Embedded (Shelf 2)


Xeon Silver 4114T 10C 2.2GHz 85W (only Special Release) S26361-F4051-E414 S26361-F4051-L414



X X


X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

Xeon Gold 6144 8C 3.5GHz 150W X


X X

X

X X

X X

X X

X X

X X

X

X

X X

X X

X XXeon Gold 6142M 16C 2.6GHz 150W S26361-F4051-E342 S26361-F4051-L342

B1




Xeon Platinum 8100 - Frequency Optimized















S26361-F4051-E244 S26361-F4051-L244

S26361-F4051-E246 S26361-F4051-L246















B


>> All processors have to be the same type.>> Exeption: If only one CPU "F" SKU is required, second CPU can be without "F" extension>> With one processor LOM, iRMC and 8x DIMM slots are available>> With two processors all 16x DIMM slots are available.>> If 128GB memory modules are required CPU "M" SKU is necessary>> To configure 2nd CPU an additional cooler kit is required.>> Empty CPU slot have to be filled up with a CPU Dummy! * HT = Hyper Threading

Restriction for CPUs above 150W TDP: Ambient temperature requirement for CPUs between 150W and 165W TDP is 30℃CPUs above 165W TDP require a liquid cooled base unit


Stan

dar

d (

S26

36

1-K

16

18

-V1

00

)Li

qu

id C

oole

d (

S26

36

1-K

16

18

-V2

00

)





S26361-F4051-E118 S26361-F4051-L118




X X

X X

X X

X

X

S26361-F4051-L950 X

Remark: Only one OMNI Path / Storm Lake CPU can be installed. If second CPU is required please use same type without "F" at the end of the SKU number



Cooling Kit for 2nd CPU (upgrade option for Standard BU)

C






B1




X X

X X

X X

X X

X X

X X

X X

X X


X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X

X X



X

X

X X

X X

X X

X

X

X

X

X X

X X

X XXeon Gold 6142M 16C 2.6GHz 150W S26361-F4051-E342 S26361-F4051-L342

B1




Xeon Platinum 8100 - Frequency Optimized















S26361-F4051-E244 S26361-F4051-L244

S26361-F4051-E246 S26361-F4051-L246





















S26361-F4051-E118 S26361-F4051-L118

Xeon Silver 4100 - Frequency Optimized (Shelf 2)







Xeon Bronze 3100 - Basic (Shelf 1)

64-bit Intel Xeon processor supporting DDR4 @ 2133MHz & QPI Bus @ 9.6 GT/s




B


>> All processors have to be the same type.

>> With one processor LOM, iRMC and 8x DIMM slots are available

>> With two processors all 16x DIMM slots are available.

>> If 128GB memory modules are required CPU "M" SKU is necessary

>> To configure 2nd CPU an additional cooler kit is required.

>> Empty CPU slot have to be filled up with a CPU Dummy! * HT = Hyper Threading

Restriction for CPUs above 150W TDP:

Ambient temperature requirement for CPUs between 150W and 165W TDP is 30℃

CPUs above 165W TDP require a liquid cooled base unit


Stan

dard

(S2

6361

-K16

16-V

100)

Liq

uid

Coo

led

(S26

361-

K16

16-V

500)

Xeon Silver 4100 - Standard (Shelf 2)

64-bit Intel Xeon processor supporting HT*, DDR4 @ 2400 MHz & QPI Bus 9.6 GT/s




X X

X

X

X

X X

X X

X

S26361-F4051-L950 XCooling Kit for 2nd CPU (upgrade option for Standard BU)

C


Xeon Gold 5119T 14C 1.9GHz 85W S26361-F4051-E419 S26361-F4051-L419



Xeon Silver 4100 - Embedded (Shelf 2)


Xeon Silver 4114T 10C 2.2GHz 85W (only Special Release) S26361-F4051-E414 S26361-F4051-L414

Xeon Gold 5100 - Embedded (Shelf 3)






B1




Edition2017/09/15

CX2550 M4/CX2550 M4 LC does not support Rank Sparing Mode / Mirroed Channel Mode

16GB (1x16GB) 1Rx4 DDR4-2666 R ECC S26361-F4026-E616 S26361-F4026-L616


DDR4 lr 2666

64GB (1x64GB) 4Rx4 DDR4-2666 LR ECC S26361-F4026-E864

64GB (1x64GB) 4Rx4 DDR4-2666 3DS ECC S26361-F4026-E764 S26361-F4026-L764

DDR4 rg 2666 3DS

DDR4 rg x4 2666



DDR4 rg x8 2666

112GB 240GB

4R 128GB 8R

BIOS Setup factory preinstalled to this mode. Six identical memory modules are always equipped in one memory bank to use the Mirrored channel Mode. Only three modules contain active data, the remain three modules contain mirrored data.

Multiple of 6 identical modules to be configured per CPU

Resulting memory capacity / Rank Sparing Mode, 1 Channel populated

32GB 2R 64GB

RDIMM LRDIMM

16GB 1R 16GB 2R

Chapter 4 - DDR4 System memory

C

Node CX2550 / CX2560 / CX2570 M4 16x DIMM configuraiton (Mix configuration for 1DPC / 2DPC)

There are 2 different kinds of DDR4 Memory Modules available: RDIMM and RDIMM 3DS (also known as TSV)Mix of RDIMM and RDIMM 3DS is under investigation.

The memory speed is independent from the configuration (1DPC or 2DPC) but restricted by the CPU SKU (max. 2.666 MT/s).DDR4 memory is operated at 1.2V

Max memory capacity is 768GB/CPU. If >768GB/CPU is required, please take 6100M or 8100M CPU SKU

Preview on NVDIMM support in 2018 (not POR for release in 2017)Up to 12 NVDIMMs are supported per System (6 per CPU)

This leads to the following maximum memory capacity per System:7.680 GB DDR4 with 12x 512GB NVDIMM (6.144GB) + 12x 128GB RDIMM 3DS (1.536GB)

S26361-F3694-E10 Independent Mode Installation

S26361-F3694-E2 Perfomance Mode Installation

BIOS Setup factory preinstalled for maximum Performance, six identical memory modules will be equipped in one memory bank to achieve highest memory performance. All six modules are active and full capacity can be used.

Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined

Requires minimum 1 memory Module per CPU

S26361-F3694-E1 Rank Sparing Mode Installation

BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory.For effective capacity within a channel, please have a look below.

Requires minimum 2x 1R/2R or 1x 4R/8R modules per CPU

Multiple of 6 identical modules to be configured per CPU

S26361-F3694-E3 Mirrored Channel Mode Installation

128GB (1x128GB) 8Rx4 DDR4-2666 3DS ECC S26361-F4026-E728 S26361-F4026-L728

D

S26361-F4026-L864

1DPC 8GB 16GB 48GB 112GB

2DPC 16GB 24GB 48GB

cnfgCX400M4_CX25x0M4.xlsx RAM Page 16 of 44


Edition2017/09/15

*) For the delivery ex factory the system will be prepared with dedicated BIOS setting.

For CX2550 M4 / CX2550 M4 LC / CX2560 M4 / CX2570 M4 / CX2570 M4 LC

required

required if 2nd CPU

Bank I Data Data Data Data Data Data Data Data Data Data Data Data is configured

(black sockets)

Bank II Data Data Data Data optional, same type

(blue sockets) in Bank per CPU

optional, any type

Bank I black sockets Bank II blue sockets

Independant channel mode

Cha

nn

el A

Detailed infomation

Mode ConfigurationRDIMM

RDIMM

Use case, advantage

supports detecting multi-bit errors

Independant channel mode 1 or 2 Modules per Bank yes yes offers max. flexibility, upgradeability, capacity

LRDIMM

x8 x4

SDDC (chipkill) support any no yes

Mirrored channel mode *) 6 identical Modules / Bank no yes offers maximum security

Performance mode 6 identical Modules / Bank yes yes offers maximum performance and capacity

Rank sparing mode *) min. 2 Ranks / Channel no yes balances performance and capacity

Capacity Configuration RDIMM RDIMM 3DS Notes

Max. Memory per System 16 Modules / System 512GB 2,048GB if second CPU is configured

The memory sockets on the Systemboards are color coded

Min. Memory per CPU 1 Module / CPU 1x8GB 1x64GB with one CPU

Max. Memory per CPU 8 Modules / CPU 8x32GB 8x128GB with one CPU

Rank sparing mode --- 1-Rank Memory modules (RDIMM)

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el C

Cha

nn

el B

No support for 1 RANK Memory module

Cha

nn

el D

Cha

nn

el E

Cha

nn

el M

1st XEON CPU (4 - 28 Core)

2nd XEON CPU (4 - 28 Core)

For Node CX2550/CX2560/CX2570 M4



Edition2017/09/15

required

required if 2nd CPU

Bank I Spare Spare Spare Spare Spare Spare R1 Spare Spare Spare Spare Spare Spare is configured

(black) Data Data Data Data Data Data R2 Data Data Data Data Data Data

optional, same type

Bank II R1 in Channel per CPU

(blue) R2

optional, any type

required

required if 2nd CPU

Bank I Spare Spare Spare Spare Spare Spare R1 Spare Spare Spare Spare Spare Spare is configured

(black) Data Data Data Data Data Data R2 Data Data Data Data Data Data

Data Data Data Data Data Data R3 Data Data Data Data Data Data optional, same type

Data Data Data Data Data Data R4 Data Data Data Data Data Data in Channel per CPU

Bank II optional, any type

(blue)

Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M




Rank sparing mode --- 4-Rank Memory modules (RDIMM 3DS)

Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M


Cha

nn

el J

For Node CX2560/CX2570 M4 (only supported on 1DPC)




Edition2017/09/15

required

required if 2nd CPU

Bank I Data Data Data Data Data Data Data Data Data Data Data Data is configured

(black sockets)

Bank II optional, same type


optional, any type

required

required if 2nd CPU

Bank I Data Mirror Data Data Data Data Data Mirror Data Data Data Data is configured

(black sockets)



optional, any type

required

required if 2nd CPU

Bank I D/M D/M D/M Data Data Data D/M D/M D/M Data Data Data is configured

(black sockets)



optional, any type

Mirror Channel Mode (2 DIMMS per CPU)

Performance Channel Mode

Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J



Mirrored Channel Mode (2 DIMMs per CPU) requires identical modules on channel A & B (1st CPU) or channel G & H (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 2 identical modules has to be ordered.

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M

Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M




Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M



Mirrored Channel Mode (3 DIMMs per CPU) requires identical modules on channel A, B & C (1st CPU) or channel G, H & J (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 3 identical modules has to be ordered.

For Node CX2550/CX2560/CX2570 M4





Edition2017/09/15

required

required if 2nd CPU

Bank I Data Mirror Data Data Mirror Data Data Mirror Data Data Mirror Data is configured

(black sockets)



optional, any type

required

required if 2nd CPU

Bank I D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M D/M is configured

(black sockets)



optional, any type

Mirror Channel Mode (4 DIMMS per CPU)Ch

an

ne

l A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M



Mirrored Channel Mode requires identical modules on channel A, B, C, D, E, F (1st CPU) or channel G, H, J, K, L and M (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 6 identical modules has to be ordered.



Mirrored Channel Mode (4 DIMMs per CPU) requires identical modules on channel A, B, D & E (1st CPU) or channel G, H, K & L (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory. If this mode is used, a multiple of 4 identical modules has to be ordered.


Cha

nn

el A

Cha

nn

el B

Cha

nn

el C

Cha

nn

el D

Cha

nn

el E

Cha

nn

el F

Cha

nn

el G

Cha

nn

el H

Cha

nn

el J

Cha

nn

el K

Cha

nn

el L

Cha

nn

el M





Edition2017/09/15



Edition21st of December 2016

Will be available beginning of September 2018

Liquid cooling Liquid cooling Liquid cooling

Basic unit for CX2570M4 (SXM2)

Always 4x SXM2 required

S26361-F5653-E740 S26361-F5653-L740

8pin power cable for 1st P100 or M60

max. 1x per system required For later upgrade a service technician needed

S26361-F5653-L750

8pin power cable for 2nd P100 or M60

S26361-F5653-E750 For later upgrade a service technician needed

max. 1x per system required, needs 2nd GPGPU

Will be available September 2018

S26361-F5651-L580

8pin power cable for 1st M10

For later upgrade a service technician neededS26361-F5651-L590

8pin power cable for 2nd M10

S26361-F5653-E740 S26361-F5651-E580 For later upgrade a service technician needed

max. 1x per system required max. 1x per system required

S26361-F5653-E750 S26361-F5651-E590

max. 1x per system required, needs 2nd GPGPU max. 1x per system required, needs 2nd GPGPU

Perpetual Software license

as soon as available as soon as available as soon as available

as soon as available as soon as available as soon as availablethis SKU was EOL this SKU was EOL this SKU was EOL

as soon as availableNVIDIA SUMS License (6 months) for renewal - Loose Delivery -

NVIDIA SUMS License (1 year) for renewal - Loose Delivery -

as soon as availableNVIDIA SUMS License (2 years) for renewal - Loose Delivery -



S26361-F4024-L972

NVIDIA GRID vApps Prod SUMS 2yrs Renew, 1CCU NVIDIA GRID vPC Prod SUMS 2yrs Renew, 1 CCU NVIDIA GRID vWS Prod SUMS 2yrs Renew, 1 CCU

NVIDIA SUMS License (2years) for renewal. It needs if you need to

continue SUMs.


continue SUMs.


continue SUMs.

S26361-F4024-L901 S26361-F4024-L911 S26361-F4024-L921

NVIDIA GRID vApps Prod SUMS 1yr Renew, 1CCU NVIDIA GRID vPC Prod SUMS 1yr Renew, 1 CCU NVIDIA GRID vWS Prod SUMS 1yr Renew, 1 CCU

NVIDIA SUMS License (1year) for renewal. It needs if you need to

continue SUMs.


continue SUMs.


continue SUMs.


continue SUMs.

S26361-F4024-L953 S26361-F4024-L963 S26361-F4024-L973



continue SUMs.


continue SUMs.


continue SUMs.

NVIDIA GRID vWS Prod SUMS 4yrs Renew, 1 CCU


continue SUMs.


continue SUMs.

same volume with

perpetual license

S26361-F4024-L956 S26361-F4024-L966

NVIDIA GRID vApps Prod SUMS 6 months Renew, 1CCU NVIDIA GRID vPC Prod SUMS 6 months Renew, 1 CCU

NVIDIA SUMS License (6 months) for renewal. It needs if you need to

continue SUMs.


continue SUMs.

S26361-F4024-L954 S26361-F4024-L964

NVIDIA GRID vApps Prod SUMS 4yrs Renew, 1CCU NVIDIA GRID vPC Prod SUMS 4yrs Renew, 1 CCU

S26361-F4024-L952 S26361-F4024-L962

L26361-F4024-L825

S26361-F4024-S823

L26361-F4024-L823

NVIDIA Quadro vDWS

Prod SUMS 3 year, 1

CCU

same volume with

perpetual license

S26361-F4024-S814

L26361-F4024-L814

NVIDIA GRID vPC Prod SUMS

4 year, 1 CCU

same volume with

perpetual license

NVIDIA Quadro vDWS

Prod SUMS 4 year, 1

CCU

NVIDIA Quadro vDWS

Prod SUMS 5 year, 1

CCU

S26361-F4024-E821 S26361-F4024-S824 S26361-F4024-S825

L26361-F4024-L824

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

same volume with

perpetual license

S26361-F4024-L976

NVIDIA GRID vWS Prod SUMS 6 months Renew, 1 CCU


continue SUMs.

S26361-F4024-L974

NVIDIA GRID vApps Prod

SUMS 1st year, 1CCU


SUMS 3 year, 1CCU


SUMS 5 year, 1CCU


1st year, 1 CCU


3 year, 1 CCU

NVIDIA GRID vPC Prod

SUMS 5 year, 1 CCU

NVIDIA GRID vWS

Prod SUMS 1st year,

1 CCU

S26361-F4024-E801 S26361-F4024-S803 S26361-F4024-S805 S26361-F4024-E811 S26361-F4024-S813 S26361-F4024-S815

L26361-F4024-L803 L26361-F4024-L805 L26361-F4024-L813 L26361-F4024-L815

S26361-F4024-S804

L26361-F4024-L804


SUMS 4 year, 1CCU

GRID Virtual Applications

(vApps) Perpetual License,

1 CCU

NVIDIA GRID Virtual PC

(vPC) Perpetual License,

1 CCU

NVIDIA Quadro

Virtual Datacenter

Work Station (vDWS)

Perpetual License, 1

CCU

SUMs must be ordered in equal numbers with each SW perpetual licences. Please refer data sheet.32x per M60 card 32x per M60 card 32x per M60 card

64x per M10 card 64x per M10 card 64x per M10 card

24x per P40 card 24x per P40 card 24x per P40 card

S26361-F4024-L101 S26361-F4024-L201 S26361-F4024-L301

PCIe *16 (Gen3) - double width - occupies space for two PCIe

slots, Full height bracket





max. 2x per system max. 2x per system max. 2x per system Cards personality is set to graphic card ex factory!

S26361-F4024-S101 S26361-F4024-S201 S26361-F4024-S301

PGRA CP NVIDIA Tesla M10

NVIDIA Tesla M60 Card with 4096 graphic cores & 16GB GDDR5

RAM. PCIe Gen3

NVIDIA Tesla P40 Card with 3840 graphic cores & 24GB GDDR5

RAM. PCIe Gen3

NVIDIA Tesla M10 Card with 2560 graphic cores & 32GB GDDR5

RAM. PCIe Gen3

8pin power cable for 2nd P100 or M60 8pin power cable for M10

S26361-F2222-E964 S26361-F4025-E140 S26361-F2222-E910 For GRID SW to use the virtual graphic (GRID) funtionality, a SW

activation key and support licence has to be purchased

additionally. Please refer to additional licence oferings for Virtual

Applications / Virtual PC / Virtual Workstation plus SUMs (Support,

Updates & Maintenance subscriptions).

Not released as GPGPU card.

PGRA CP NVIDIA Tesla M60 PY NVIDIA Tesla P40

Supported for GPU pass through and vGPU (shared GPU) under Citrix XenServer 6.5 and

XenDesktop. Workload depends on application. Ideal for virtualized GPU or shared GPU

workload like "Power Users" or "Knowlegde Workers", including "Designer" as full power

graphic USER (GRID K2 only).

Supported for VMware ESXi 5.5 shared (vSGA) & dedicated (vDGA) virtual graphic support

and Microsoft RemoteFX under Windows Server 2012 R2.

All guests OSes are supported if listed at OS vendors HCL.

NOT certified for CAD / CAM / CAX type of applications using dedicated GPU.

NVIDIA TESLA M60/M10 GPU pass through / vGPU

8pin power cable for 1st P100 or M60 8pin power cable for M10

NVIDIA Tesla P100 Card with 3584 graphic cores &

16GB graphic memory. PCIe Gen3

NVIDIA Tesla P100 Card with 3584 graphic cores &

12GB graphic memory. PCIe Gen3

NVIDIA Tesla V100 Card with 5120 graphic cores &

32GB HBM2 memory. PCIe Gen3

PCIe *16 (Gen3) - single width - occupies space for one

PCIe slots, Full height bracket





NVIDIA Tesla V100 Card with 5120 graphic cores &

16GB HBM2 memory. PCIe Gen3



max. 2x per system

8pin power cable for 2nd P100 or M60

S26361-F4025-L225

for later upgrade

min./max. 4x per CX2570 M4 LC (SXM2) min./max. 4x per CX2570 M4 LC (SXM2)

NVIDIA Tesla P100 /V100 for PCIe

8pin power cable for 1st P100 or M60

S26361-F4025-L112S26361-F4025-E116 S26361-F4025-E112 S26361-F4025-E232

PY NVIDIA Tesla P100 for PCIe PY NVIDIA Tesla P100 for PCIe PY NVIDIA Tesla V100 for PCIe for later upgrade

S26361-F4025-L116

for later upgrade

max. 2x per system max. 2x per system max. 2x per system

min./max. 4x per CX2570 M4 LC (SXM2)

S26361-F4025-E225

PY NVIDIA Tesla V100 for PCIe

NVIDIA Tesla P100 with 3584 graphic cores & 16GB graphic

memory. NVLink

NVIDIA Tesla V100 with 5120 graphic cores & 32GB HBM2

memory. NVLink

power cables from PSU need to be ordered separately. 2400

PSU is recommended


PSU is recommended

PCIe *16 (Gen3) - mezz

Support OS is only RHEL7

PCIe *16 (Gen3) - mezz type


Chapter 5 - Graphics options

D

NVIDIA Tesla P100/V100 for SXM2

S26361-F4025-E100/L100 S26361-F4025-E202/L202

PY NVIDIA Tesla P100 for SXM2 PY NVIDIA Tesla V100 for SXM2

S26361-F4025-E200/L200

PY NVIDIA Tesla V100 for SXM2

NVIDIA Tesla V100 with 5120 graphic cores & 16GB HBM2

memory. NVLink


PSU is recommended

PCIe *16 (Gen3) - mezz type


cnfgCX400M4_CX25x0M4.xlsx GFX Page 22 of 44





continue SUMs.


continue SUMs.


continue SUMs.

S26361-F4024-L955 S26361-F4024-L965 S26361-F4024-L975





Subscription Software licenseas soon as available as soon as available as soon as available

as soon as availableNVIDIA Subscription License (6 months) for renewal - Loose Delivery -

NVIDIA Subscription License (1year) for renewal - Loose Delivery -

as soon as availableNVIDIA Subscription License (2years) for renewal - Loose Delivery -



Education Software license

as soon as available as soon as available

Perpetual license Subscription license

this SKU was EOL

as soon as available as soon as availableNVIDIA EDU SUMS License (6 months) for renewal - Loose Delivery - NVIDIA Subscription License (6 months) for renewal - Loose Delivery -

NVIDIA EDU SUMS License (1year) for renewal - Loose Delivery - NVIDIA Subscription License (1year) for renewal - Loose Delivery -

as soon as available as soon as availableNVIDIA EDU SUMS License (2 years) for renewal - Loose Delivery - NVIDIA Subscription License (2years) for renewal - Loose Delivery -

as soon as available as soon as availableNVIDIA EDU SUMS License (3 years) for renewal - Loose Delivery - NVIDIA Subscription License (3years) for renewal - Loose Delivery -

as soon as availableNVIDIA EDU SUMS License (4 years) for renewal - Loose Delivery -

as soon as availableNVIDIA EDU SUMS License (5 years) for renewal - Loose Delivery -

S26361-F4024-L943

NVIDIA GRID EDU Subscription License 3yrs Renew, 1CCU

NVIDIA Subscription License (3 years) for ｒｅｎｅｗａｌ. It needs if you need

to continue Subscription.

S26361-F4024-L946

NVIDIA GRID EDU Subscription License 6 months Renew, 1CCU

NVIDIA Subscription License (6 months) for ｒｅｎｅｗａｌ. It needs if you

need to continue Subscription.

S26361-F4024-L941

NVIDIA GRID EDU Subscription License 1yr Renew, 1CCU

NVIDIA Subscription License (1 year) for ｒｅｎｅｗａｌ. It needs if you need


S26361-F4024-L942

NVIDIA GRID EDU Subscription License 2yrs Renew, 1CCU

NVIDIA Subscription License (2 years) for ｒｅｎｅｗａｌ. It needs if you need


S26361-F4024-L833 S26361-F4024-L835

S26361-F4024-S413

S26361-F4024-L413

NVIDIA GRID EDU

Subscription License,

3 year, 1 CCU

24x per P40 card

32x per M60 card

64x per M10 card

S26361-F4024-L401

NVIDIA GRID EDU Perpetual

License,

1 CCU

S26361-F4024-S835

EDU SUMs must be ordered in equal numbers with each SW perpetual licences. Please refer data sheet.

64x per M10 card

S26361-F4024-S315

S26361-F4024-L315

NVIDIA Quadro

Virtual Datacenter

Work Station (vDWS)


5 years, 1 CCU24x per P40 card

32x per M60 card

64x per M10 card

NVIDIA EDU SUMS License (5 years) for ｒｅｎｅｗａｌ. It needs if you need to

continue EDU SUMs.

S26361-F4024-S411

S26361-F4024-L411

NVIDIA GRID EDU


1 year, 1 CCU

24x per P40 card

32x per M60 card

64x per M10 card


continue EDU SUMs.

S26361-F4024-L931

NVIDIA GRID EDU SUMS 1yr Renew, 1CCU

NVIDIA EDU SUMS License (1year) for ｒｅｎｅｗａｌ. It needs if you need to

continue EDU SUMs.

S26361-F4024-L933

NVIDIA GRID EDU SUMS 3yrs Renew, 1CCU


continue EDU SUMs.

S26361-F4024-L935


(vPC) Subscription License,

3 years, 1 CCU

24x per P40 card

32x per M60 card

64x per M10 card

S26361-F4024-S313

S26361-F4024-L313

NVIDIA Quadro

Virtual Datacenter

Work Station (vDWS)


3 years, 1 CCU24x per P40 card

32x per M60 card

64x per M10 card

NVIDIA Subscription License (6 months) for renewal. It needs if you


24x per P40 card

32x per M60 card 32x per M60 card

24x per P40 card

32x per M60 card

64x per M10 card

S26361-F4024-S111 S26361-F4024-S113 S26361-F4024-S115 S26361-F4024-S211 S26361-F4024-S213 S26361-F4024-S215

S26361-F4024-L113


(vApps) Subscription

License, 3 years, 1 CCU

24x per P40 card

32x per M60 card

64x per M10 card

S26361-F4024-L115



License, 5 years, 1 CCU

24x per P40 card

32x per M60 card

64x per M10 card

S26361-F4024-L213

S26361-F4024-L834

NVIDIA GRID EDU SUMS 4

year, 1 CCU

same volume with EDU

perpetual license

S26361-F4024-E831 S26361-F4024-S833 S26361-F4024-S834

S26361-F4024-S401

24x per P40 card

24x per P40 card

32x per M60 card

NVIDIA GRID vApps Subscription License 2yrs Renew, 1CCU

E

NVIDIA GRID EDU SUMS 1st

year, 1 CCU


year, 1 CCU


year, 1 CCU


perpetual license


perpetual license


perpetual license

S26361-F4024-L930

NVIDIA GRID EDU SUMS 6 months Renew, 1CCU

NVIDIA EDU SUMS License (6 months) for ｒｅｎｅｗａｌ. It needs if you need

to continue EDU SUMs.

S26361-F4024-L932



continue EDU SUMs.

S26361-F4024-L934



NVIDIA Subscription License (3 years) for renewal. It needs if you need to

continue Subscription.

NVIDIA Subscription License (3 years) for renewal. It needs if you




S26361-F4024-L905 S26361-F4024-L915 S26361-F4024-L925

NVIDIA GRID vApps Subscription License 5yrs Renew, 1CCU NVIDIA GRID vPC Subscription License 5yrs Renew, 1 CCU NVIDIA GRID Quadro vDWS Subscription License 5yrs Renew, 1 CCU

This license model is NOT requirement for SUMS(Support license). It is including it.

24x per P40 card

S26361-F4024-L903 S26361-F4024-L913 S26361-F4024-L923







NVIDIA GRID vPC Subscription License 2yrs Renew, 1 CCU NVIDIA GRID Quadro vDWS Subscription License 2yrs Renew, 1 CCU







S26361-F4024-L902 S26361-F4024-L912 S26361-F4024-L922

NVIDIA GRID vApps Subscription License 1yr Renew, 1CCU NVIDIA GRID vPC Subscription License 1yr Renew, 1 CCU NVIDIA GRID Quadro vDWS Subscription License 1yr Renew, 1 CCU

NVIDIA Subscription License (1 year) for renewal. It needs if you need to


NVIDIA Subscription License (1 year) for renewal. It needs if you


NVIDIA Subscription License (1 year) for renewal. It needs if you


S26361-F4024-L215

NVIDIA GRID vApps Subscription License 3yrs Renew, 1CCU NVIDIA GRID vPC Subscription License 3yrs Renew, 1 CCU NVIDIA GRID Quadro vDWS Subscription License 3yrs Renew, 1 CCU

S26361-F4024-L900 S26361-F4024-L910 S26361-F4024-L920

S26361-F4024-L111 S26361-F4024-L211 S26361-F4024-L311



License, 1 year, 1 CCU



1 year, 1 CCU

NVIDIA Quadro

Virtual Datacenter

Work Station (vDWS)


1 year, 1 CCU

32x per M60 card

64x per M10 card 64x per M10 card 64x per M10 card

S26361-F4024-L906 S26361-F4024-L916 S26361-F4024-L926

NVIDIA GRID vApps Subscription License 6 months Renew, 1CCU NVIDIA GRID vPC Subscription License 6 months Renew, 1 CCU NVIDIA GRID Quadro vDWS Subscription License 6 months Renew, 1 CCU

NVIDIA Subscription License (6 months) for renewal. It needs if you need


NVIDIA Subscription License (6 months) for renewal. It needs if you




5 years, 1 CCU

S26361-F4024-S311



Edition2018/05/10

In case of Node CX2560/CX2570 M4

6x 2.5" HDD cage HDD cage dummy If S26361-F4575-E11 is ordered,

S26361-F5651-E350/L350 S26361-F5651-E340/L340 either HDD cage or dummy needs to be ordered

1x per Node 1x per Node

SATA cable for onb. SATA cont. If 6x 2.5" HDD cage is ordered, bridge board (S26361-F5651-E180)

S26361-F5651-E260/L260 needs to be ordered for CX400 M4 chassis

1x per Node

Loose delivery of SAS cable when RAID card used

S26361-F5651-L320

In case of CX2550 M4

2x 2.5" HDD cage HDD cage dummy If S26361-F4575-E11 is ordered,

S26361-F5651-E430/L430 S26361-F5651-E340/L340 either HDD cage or dummy needs to be ordered

1x per Node 1x per Node

If 2x 2.5" HDD cage is ordered, bridge board (S26361-F5651-E180)

SATA cable for onb. SATA cont. needs to be ordered for CX400 M4 chassis

S26361-F5651-E260/L260

1x per Node

In case of Node CX2560/CX2550/CX2570 M4 system for low profile slot

for CX2560 M4 for CX2550 M4 for CX2570 M4

As soon as availble As soon as availble

Right PCIe riser Right PCIe riser(IB) Right PCIe riser(Excluding IB) Right PCIe riser (IB) Right PCIe riser (Excluding IB)

S26361-F5651-E290 S26361-F5651-E390 S26361-F5651-E500 S26361-F5651-E390 S26361-F5651-E500

Connected to CPU1 Connected to CPU2 Connected to CPU2 Connected to CPU2 Connected to CPU2

1x per Node 1x per Node 1x per Node 1x per Node 1x per Node

Right PCIe riser

S26361-F5651-E290

Connected to CPU1

1x per Node

Only for air cooling for left PCIe riser

Left PCIe riser Left PCIe riser Loose delivery of riser card Right PCIe riser required

S26361-F5651-E280 S26361-F5651-E280 Please see below table if 2CPU configuration

Connected to CPU1 Connected to CPU1 Right PCIe riser : It is necessary

1x per Node 1x per Node when Liquid cooling

Left PCIe riser : It is not necessary

when Liquid cooling

Left L-Number

Mandatory for CX2570 M4 (PCIe), please select 1 out of 2 GPU riser cards below CPU1 S26361-F5651-L520

CPU1 S26361-F5651-L520

GPU riser card (CPU1) GPU riser card (CPU2)

S26361-F1618-E100/L100 S26361-F1618-E110/L110

Two GPGPU connected to CPU1 Two GPGPU conencted to CPU1 / 2

1x per CX2570 M4 1x per CX2570 M4

2x CPU required

F

CPU1

CX2560 M4 Air CPU1

CX2550 M4 Air

Right

Chapter 6 - Drive cage and PCIe riser options

E

Drive cage

PCIe riser

GPGPU riser

cnfgCX400M4_CX25x0M4.xlsx HD_cage Page 25 of 44


Edition2017/05/21

for all CX2550 / CX2560 / CX2570 M4

Support for CX2550 / CX2560 / CX2570 Air cooling

PRAID CP400i RAID Contr. No Cache

PSAS CP400i HBA SAS Contr. No Cache


Note: Not possible to connect SATA Device FBU is supported only for CX2560 / CX2570 Air cooilng

RAID 0,1,1E,10,5,50,6,60

optional Licence Activation Key, a free of charge test licence is available at PRIMERGY-PM, FastPath is included in Controller FW

License Activation Key for CacheCade 2.0CacheRAID Advanced SW Option CacheCade ®Broadcom: SSD-cache-based HDD accelleration

optional Transportable Flash module (TFM) and Flash Backup Unit (FBU), both components required

PRAID EP420i for SafeStore R. Contr.



optional TFM module and Flash Backup Unit (FBU), both components required

intenal HBA and RAID controller, no 2nd Level cache

internal drive RAID / HBA controllers for SAS, SATA HDD or SSD drives

RAID 0, 1, 1E, 10, 5, 50 1x S26361-F3842-E1 S26361-F3842-L501

Chapter 7 - SAS / RAID Controller

G

onboard SATA controller with SW-RAID

onboard controller for SATA HDD or SSD drives

6Gb/s SATA HDD/SSD based on Intel chipset No Cache SW-RAID 0, 1 1x onboard, included

HBA + RAID 0, 1 1x S26361-F3842-E2 S26361-F3842-L502

8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, supports up to 8 devices without expanderrequires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3008

internal RAID controller with 2nd Level cache 1GB, 2GB

internal drive RAID / SAS, SATA controllers with Cache and opt. TFM module + Flash Backup Unit and opt. Advanced SW Options

PRAID EP400i RAID Contr. 1GB Cache 1x S26361-F5243-E11 S26361-F5243-L11


1x S26361-F5243-E670 S26361-F5243-L670

TFM module for 1GB Cache NV-RAM & FBU control logic 1x S26361-F5243-E100 S26361-F5243-L100

FBU Option for PRAID EP4xx : Supercap securing the power supply of the RAID controller in

case of power failure including cable with 55cm lenght

1x S26361-F5243-E156 S26361-F5243-L112

PRAID EP420i RAID Contr. 2GB Cache RAID 0,1,1E,10,5,50,6,60 1x S26361-F5243-E12 S26361-F5243-L12


2GB Cache RAID 0,1,1E,10,5,50,6,60 1x S26361-F5243-E14** S26361-F5243-L14**


1x S26361-F5243-E670 S26361-F5243-L670

FBU Option for PRAID EP4xx: Supercap securing the power supply of the RAID controller in

case of power failure including cable with 55cm lenght

1x S26361-F5243-E156 S26361-F5243-L112

cnfgCX400M4_CX25x0M4.xlsx RAID Page 26 of 44


Edition2017/05/21


PSAS CP400e HBA SAS Contr. LP No Cache


FBU is supported only for CX2560 / CX2570 Air cooling

PRAID EP420e for SafeStore LP



optional TFM module and Flash Backup Unit (FBU), both components required

G **It is strongly recommended to order SafeStore (SED) RAID controller with SED HDD or SSD devices for SafeStore (SED) functionalityexternal SAS controller

HBA controller for ext. drives SAS, SATA HDD or SSD drives

HBA, no RAID 2x S26361-F3845-E201 S26361-F3845-L501

8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, 2x SFF8644 (external Mini-SAS HD)requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3008

external SAS, RAID controller with 2nd Level cache 2GB

RAID / SAS, SATA controllers for external drives with Cache and opt. TFM module + Flash Backup Unit and opt. Advanced SW Options

PRAID EP420e RAID Contr. LP 2GB Cache RAID 0,1,1E,10,5,50,6,60 1x S26361-F3847-E202 S26361-F3847-L502

2GB Cache RAID 0,1,1E,10,5,50,6,60 1x S26361-F3847-E204 S26361-F3847-L504

8 ports 3, 6 & 12Gb/s SAS/SATA HDD/ SSD, 2x SFF8644 (external Mini-SAS HD)requires 1x LP PCIe 3.0 x8 (int.) slot, based on LSI SAS3108

1x S26361-F5243-E670 S26361-F5243-L670

H

FBU Option for PRAID EP4xx for base : Supercap securing the power supply of the RAID

controller in case of power failure including cable with 55cm lenght

1x S26361-F5243-E156 S26361-F5243-L112


cnfgCX400M4_CX25x0M4.xlsx RAID Page 27 of 44


Edition21th of December 2016

I

Chapter 8 - ODD optical disk drives

No internal ODD support

cnfgCX400M4_CX25x0M4.xlsx ODD Page 28 of 44


EditionDec 21th, 2016

Chapter 9 - backup drives

L

No internal backup drive support

cnfgCX400M4_CX25x0M4.xlsx backup Page 29 of 44


Edition2018/03/02

max. 6x - CX2560 M4 / CX2570 M4 with air cooling

1.6TB 2.5" (SFF) SAS 12Gb/s Write Intensive 10 S26361-F5608-E160 S26361-F5608-L160

400GB 2.5" (SFF) SAS 12Gb/s Write Intensive 10 SED S26361-F5611-E400 S26361-F5611-L40010 SED S26361-F5611-E800 S26361-F5611-L800

1.92TB 2.5" (SFF) SAS 12Gb/s Read Intensive 1 S26361-F5670-E192 S26361-F5670-L192

S26361-F5666-E800 S26361-F5666-L800

1.6TB

800GB 2.5" (SFF) SAS 12Gb/s Write Intensive

3.2TB 2.5" (SFF) SAS 12Gb/s Mixed Use S26361-F5666-E320

7.68TB


order code E-part order code L-part

480GB 2.5" (SFF) SAS 12Gb/s Read Intensive 1 S26361-F5670-E480 S26361-F5670-L480

960GB 2.5" (SFF) SAS 12Gb/s Read Intensive 1 S26361-F5670-E960 S26361-F5670-L960

3.84TB 2.5" (SFF) SAS 12Gb/s

S26361-F5666-L320

Formfactor Interface Endurance DWPD order code E-part order code L-part

400GB 2.5" (SFF) SAS 12Gb/s Mixed Use 3 S26361-F5666-E400 S26361-F5666-L400

2.5" (SFF) SAS 12Gb/s Mixed Use 3 S26361-F5666-E160 S26361-F5666-L160

Read IntensiveSAS 12Gb/s2.5" (SFF)

Read Intensive 1 S26361-F5670-E384 S26361-F5670-L384


960GB 2.5" (SFF) SATA 6Gb/s Mixed Use 3 S26361-F5588-E960 S26361-F5588-L960

240GB 2.5" (SFF) SATA 6Gb/s Mixed Use 3.6 S26361-F5675-E240 S26361-F5675-L240

480GB 2.5" (SFF) SATA 6Gb/s Mixed Use S26361-F5675-L480

S26361-F5608-E800 S26361-F5608-L800

2.3

SSD SAS 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray

Capacity

800GB 2.5" (SFF) SAS 12Gb/s Mixed Use 3

SSD SAS 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray

Capacity Formfactor Interface Endurance DWPD

S26361-F5670-L768S26361-F5670-E7680.9

SSD SATA 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray

800GB 2.5" (SFF) SAS 12Gb/s Write Intensive 10


1.92TB 2.5" (SFF) SATA 6Gb/s Mixed Use 3

S26361-F5675-E480


I

1.6TB 2.5" (SFF) SAS 12Gb/s Write Intensive 10 SED S26361-F5611-E160 S26361-F5611-L160


400GB 2.5" (SFF) SAS 12Gb/s Write Intensive 10 S26361-F5608-E400 S26361-F5608-L400

Chapter 10 - storage drives

H

2.5" (SFF) SAS and SATA SSD

SSD SAS 2.5" Write Intensive (SFF) Enterprise with hot plug/hot replace tray


S26361-F5588-E192 S26361-F5588-L192

max. 6x - CX2560 M4 / CX2570 M4, max. 2x - CX2550 M4

3.6

SAS drives and SATA drives can be mixed, but cannot be used in one logical RAID volume.SATA drives can be connected to the onboard Controller (max. 8x),SAS drives require a dedicated SAS / RAID ControllerHard Disk Sector Format Information:

512n HDD: 512 byte sectors on the drive media.512e (e=emulation) HDD: 4K physical sectors on the drive media with 512 byte logical configuration.

512e HDD Disk Drives: VMware is not supported.512n & 512e HDDs can be mixed, but cannot be used in one logical RAID volume.

When using SSDs with VMware ESXi, select the SSDs that meet the endurance requirement described in KB2145210 below.

https://kb.vmware.com/kb/2145210DWPD (5y): Drive Writes Per Day over 5 years. SED (=Self Encrypting Drives) require either a RAID controller with ®SafeStore (SED) support or an HBA and in addition a software instance, supporting SED Key Management.It is strongly recommended to order SafeStore (SED) RAID controller with SED HDD or SSD devices for SafeStore (SED) functionality.

HDD Classes:Business-Critical (BC) -SATA=Nearline SATA Enterprise Drives / 7.2Krpm, SATA 6G.Business-Critical (BC) -SAS=Nearline SAS Enterprise Drives / 7.2Krpm, SAS 6G or SAS 12G .Mission-Critical (MC)=SAS 10K and SAS 15K Enterprise Drives with max. performance and reliability.

Warranty:SSD and SATA DOM have a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.

Toshiba Phoenix-M3 / M4

SanDisk Odyssey

Samsung SM863 / SM863a /SM883

SanDisk Odyssey

cnfgCX400M4_CX25x0M4.xlsx HD_SSD Page 30 of 44


Edition2018/03/02

Note: If HDD selected, CPU must be below 140W and Ambient temparature is below 30 deg-C.






J

2TB 7 200 SATA 6Gb/s 512e S26361-F3907-E200 S26361-F3907-L200


Capacity RPM Interface Sector order code E-part order code L-part

1TB 7 200 SATA 6Gb/s 512e S26361-F3907-E100 S26361-F3907-L100

HDD SATA 2.5" 7.2K 512e (SFF) Enterprise Business Critical with hot plug/hot replace tray


1TB 7 200 SATA 6Gb/s 512n S26361-F3956-E100 S26361-F3956-L100

2TB 7 200 SATA 6Gb/s 512n S26361-F3956-E200 S26361-F3956-L200


HDD SATA 2.5" 7.2K 512n (SFF) Enterprise Business Critical with hot plug/hot replace tray


1TB 7 200 SAS 12Gb/s 512n S26361-F5600-E100 S26361-F5600-L100


Interface Sector order code E-part order code L-part


HDD SAS 2.5" 7.2K 512n (SFF) Enterprise Business Critical with hot plug/hot replace tray

900GB 10 000 SAS 12Gb/s 512e S26361-F5543-E190 S26361-F5543-L190

1.2TB 10 000 SAS 12Gb/s 512e S26361-F5543-E112 S26361-F5543-L112

Capacity RPM

1.2TB 10 000 SAS 12Gb/s 512n S26361-F5550-E112 S26361-F5550-L112


HDD SAS 2.5" 10K 512e (SFF) Enterprise Mission Critical with hot plug/hot replace tray

300GB 10 000 SAS 12Gb/s 512n SED S26361-F5581-E130 S26361-F5581-L130


900GB 10 000 SAS 12Gb/s 512n S26361-F5550-E190 S26361-F5550-L190

S26361-F5531-L560


HDD SAS 2.5" 10K 512n (SFF) Enterprise Mission Critical with hot plug/hot replace tray



900GB 15 000 SAS 12Gb/s

I

512n S26361-F5531-E590 S26361-F5531-L590

2.5" (SFF) Hard drives

HDD SAS 2.5" 15K (SFF) Enterprise Mission Critical with hot plug/hot replace tray


600GB 15 000 SAS 12Gb/s 512n S26361-F5531-E560



Edition2018/03/02

2x M.2 drive for any Hypervisor by the onboard chipset Software RAID is not supported.

S26361-F5634-E152　VMware vSphere Embed. M.2 32GB

M.2 drive for VMware ESXi and for other OSs cannot be mixed


max. 2x - CX2550 M4 / CX2560 M4 / CX2570 M4; connector located on Motherboard. VMware is not supported.


max. 2x - CX2550 M4 / CX2560 M4 / CX2570 M4; connector located on Motherboard. VMware is not supported.

max. 2x - CX2560 M4 / CX2570 M4 with air and liquid cooling

2TB 2.5" (SFF) PCIe3.0 x4 Read Intensive 0.6

1.0 S26361-F5649-E100 S26361-F5649-L100

PCIe-SSD Low Power 2.5" Read Intensive (SFF) Enterprise with hot plug/hot replace tray

Capacity Formfactor Interface Endurance DWPD order code E-part order code L-part

500GB 2.5" (SFF) PCIe3.0 x4

S26361-F5649-E200 S26361-F5649-L200

4TB 2.5" (SFF) PCIe3.0 x4 Read Intensive 0.6 S26361-F5649-E400 S26361-F5649-L400

6.4TB 2.5" (SFF) PCIe3.0 x4 Mixed Use 3.2 S26361-F5648-E640 S26361-F5648-L640

max. 2x - CX2560 M4 / CX2570 M4 with air and liquid cooling

Read Intensive 0.7 S26361-F5649-E50 S26361-F5649-L50

1TB 2.5" (SFF) PCIe3.0 x4 Read Intensive



J

M.2 SATA SSD

order code E-part

2.5" (SFF) PCIe-SSD


K

order code L-partPCIe-SSD 2.5" Mixed Use (SFF) Enterprise with hot plug/hot replace tray

SSD SATA M.2 drive for booting, non hot-plug, for VMware ESXi

Capacity Formfactor Interface Category order code E-part order code L-part

max. 1x - CX2560 M4 / CX2570 M4; connector located on Motherboard. VMware ESXi is only supported.

SSD SATA M.2 drive for booting, non hot-plug

Capacity Formfactor Interface DWPD Category order code E-part order code L-part

32GB M.2 SATA 6Gb/s Boot S26361-F5657-E32 S26361-F5657-L32

M.2 drive is designed for use as a VMware ESXi boot drive.

128GB M.2 SATA 6Gb/s 0.13 Boot S26361-F5658-E128 S26361-F5658-L128

M.2 drive is designed for use as a boot drive with the Endurance Spec. above.

SSD SATA M.2 drive for booting, non hot-plug

Capacity Formfactor Interface DWPD Category order code E-part order code L-part

256GB M.2 SATA 6Gb/s 0.13 Boot S26361-F5658-E256 S26361-F5658-L256

M.2 drive is designed for use as a boot drive with the Endurance Spec. above.



Edition2018/07/11

I

For CX2560/CX2570Interface card to provide the external connectors for on-board LAN

PLAN EM 4x 1Gb T OCP interface Intel 4x RJ45 plug for 1000BASE-T

PLAN EM 2x 10Gb T OCP interface Intel 2x RJ45 plug for 10GBASE-T

PLAN EM 2x 10GB SFP+ OCP interface Intel

PLAN EM 4x 10GB SFP+ OCP interface Intel

Optional for products with SFP+ cages: SFP+ optical transceiver modules or twinax cables

Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP XXV710-DA2 and MCX4-LX

max. 1x per cage

as soon as

optional 10Gb SFP+ module with LC connector for Fujitsu / Intel based controller avaliable

SFP+ Optical Transceiver 10G/1G Dual Rate LR ** LC, SMF / LR SFP+ module, up to 10km, Intel S26361-F3986-E6 S26361-F3986-L6

4 port NIC, Intel X710-DA4 (Fortville)

2 port NIC, Intel X710-DA2 (Fortville)

SFP+ Optical Transceiver 10G/1G Dual Rate SR ** LC, MMF / SR SFP+ module, up to 400m, Intel S26361-F3986-E5 S26361-F3986-L5

PLAN EP X710-T4 4x10GBASE-T LP * 4 port 10 Gbit Intel X710-T4 (Fortville)

S26361-F3640-E202 S26361-F3640-L502PLAN EP X710-DA2 2x10Gb SFP+ LP

S26361-F3948-E204

PLAN EP OCe14102 2x 10GBase-T LP *

*

2 port NIC with RDMA, Emulex S26361-F5557-E201

Dual rate 10G/1G support requires 10G/1G Dual Rate SFP+ Optical Transceiver Modules

SFP+ Optical Transceiver 10G/1G Dual Rate SR 2x .. 4x LC, MMF / SR SFP+ module, up to 400m, Intel S26361-F3986-E5 S26361-F3986-L5

SFP+ Optical Transceiver 10G/1G Dual Rate LR 2x .. 4x

S26361-F5651-L540

Default: 1x RJ45 1GbE ports on systemboard

S26361-F5651-E510 S26361-F5651-L510

S26361-F4054-E302 S26361-F4054-L302

2x SFP+ cages for SFP+ optical transceivers or twinax cables

2x SFP28 cages for25G optical transceivers or 25G DAC cables

LC, SMF / LR SFP+ module, up to 10km, Intel

2x SFP28 cages for25G optical transceivers or 25G DAC cables

S26361-F4055-E302 S26361-F4055-L302

4x SFP+ cages for SFP+ optical transceivers or twinax cables

S26361-F5651-E550 S26361-F5651-L550

PLAN EP XXV710-DA2 2x 25GB SFP28 OCP Intel XXV710-DA2

PLAN EP MCX4-LX 2x 25GB SFP28 OCP Mellanox ConnectX4-LX

Chapter 11 - LAN Components

1Gb Ethernet network components

1Gb Ethernet controller with RJ45 interface (1000BASE-T)

Dynamic LoM OCP PHY/PCIe interface cards

S26361-F5651-E530 S26361-F5651-L530

S26361-F5651-E540

S26361-F4610-E202

*

*max. 1 for CX2570 M4, max. 2 for CX2550/CX2560 M4


10Gb Ethernet controller with RJ45 interface (10GBASE-T)

SFP+ Optical Transceiver 10G Single Rate SR ** LC, MMF / SR SFP+ module, up to 400m, Finisar S26361-F3986-E3 S26361-F3986-L3

S26361-F3640-E204 S26361-F3640-L504PLAN EP X710-DA4 4x10Gb SFP+ LP

LC, SMF / LR SFP+ module, up to 10km, Finisar S26361-F3986-E4 S26361-F3986-L4SFP+ Optical Transceiver 10G Single Rate LR **

S26361-F3986-E6 S26361-F3986-L6

S26361-F3986-L3

SFP+ Optical Transceiver 10G Single Rate LR 2x .. 4x

SFP+ Optical Transceiver 10G Single Rate SR 2x .. 4x LC, MMF / SR SFP+ module, up to 400m, Finisar

SFP+ active Twinax Cable Fujitsu 2x .. 4xcustomized cable length

(best fitting cable length is defined during rack installation at the factory)

SFP28 Optical Transceiver 25G SR E25GSFP28SR LC

S26361-F3986-E3

S26361-F3989-E600 see table at the

botton of this pageSFP+ active Twinax Cable Brocade 2x .. 4x S26361-F3873-E500

LC, SMF / LR SFP+ module, up to 10km, Finisar S26361-F3986-E4 S26361-F3986-L4

Twinax Anschlussplatz Primergy 2x .. 4x virtual connector for twinax cables V:TWX CONNECTOR-PY

2xMMF / SR SFP28 module, Intel. Max reach supported 30m

S26361-F4055-E701 S26361-F4055-L701

PLAN CP 2x1Gbit Cu Intel I350-T2 LP Up to 2 2 port, Intel S26361-F4610-L502

PLAN CP 4x1Gbit Cu Intel I350-T4 LP Up to 2 4 port, Intel S26361-F4610-E204 S26361-F4610-L504

S26361-F3948-L504

S26361-F5557-L501

PLAN EP X550-T2 2x10GBASE-T LP * 2 port 10 Gbit Intel X550-T2 (Sageville) S26361-F3948-E202 S26361-F3948-L502

10/1Gb Ethernet controller with SFP+ cage requires SFP+ modules or twinax cables, Fujitsu / Intel based)

SFP28 Optical Transceiver 25G SR MMA2P00-AS LC 2x

MMF / SR SFP28 module, Mellanox. Max reach supported 100m

S26361-F4054-E701 S26361-F4054-L701

"Virtual Connector" for DAC/AOC cables 2x Enablement for System Architect V:DAC/AOC-CONNECTOR-25

25G DAC - Brocade 2x DAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

25G DAC - Cisco 2x

25G DAC - Intel 2x

25G AOC - Brocade 2x AOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

25G AOC - Cisco 2x

25G AOC - Intel 2x

x1

cnfgCX400M4_CX25x0M4.xlsx LAN_FC_IB Page 33 of 44


Edition2018/07/11

**max. 4x (OCP PHY, DA4), and 2x SFP+ or Twinax Cable per controller*max. 1 for CX2570 M4, max. 2 for CX2550/CX2560 M4

customized cable length(best fitting cable length is defined during

S26361-F3989-E600 see table at the botton of this pageSFP+ active Twinax Cable Brocade ** S26361-F3873-E500

SFP+ active Twinax Cable Fujitsu **

Twinax Anschlussplatz Primergy ** virtual connector for twinax cables V:TWX CONNECTOR-PY



Edition2018/07/11

optional 10Gb SFP+ module with LC connector for Emulex controller

***max. 2x SFP+ or Twinax Cable per controller

(*1) Only linux support

25/10Gb Ethernet controller with 2x SFP28 cages (requires twinax cables or optical transceiver SFP28 or SFP+ modules)

Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP QL41212 25Gb 2p SFP28

Max. 2x SFP28 or DAC/AOC Cable per PLAN EP QL41212 25Gb 2p SFP28

Optional, 10Gb SFP+ Optical Transceiver module with LC connector for PLAN EP QL41212 25Gb 2p SFP28

SFP+ active Twinax Cable - Brocade 2x S26361-F3873-E500

max. 2x SFP+ or Twinax Cable per PLAN EP QL41212 25Gb 2p SFP28

*) max. 2x PLAN EP QL41212 25Gb 2p SFP28 for CX2550 M4, max 2x for CX2560 M4, max 1x for CX2570 M4.


Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP XXV710-DA2

Max. 2x SFP28 or DAC/AOC Cable per PLAN EP XXV710-DA2. No SFP28 for OCP Type 1 allowed.

Optional, 10Gb SFP+ Optical Transceiver module with LC connector for PLAN EP XXV710-DA2


SFP28 Optical Transceiver 25G SR MMA2P00-AS LC

S26361-F4054-E701

"Virtual Connector" for Twinax cables

S26361-F4054-L701

2xMMF / SR SFP28 module, Mellanox. Max reach supported 100m

Multiple speed support, auto-sense - supports 25Gbps, 10Gbps and 1Gbps line rate per-port

PLAN EP XXV710-DA2 2x25Gb LP *) Dual Port NIC, Intel S26361-F4055-E202 S26361-F4055-L502

S26361-F3989-E600

customized cable length(best fitting cable length is defined during rack installation at the factory)

2x

see table at the botton of this page

SFP+ active Twinax Cable Brocade

SFP28 Optical Transceiver 25G SR MMA2P00-AS LC

Dual Port NIC, iWARP & RoCE RDMA, Cavium S26361-F4056-E202 S26361-F4056-L502

Enablement for System Architect

virtual connector for twinax cables V:TWX CONNECTOR-PY

SFP+ active Twinax Cable Fujitsu ***

S26361-F3986-L3

SFP+ Optical Transceiver 10G Single Rate LR 2x LC, SMF / LR SFP+ module, up to 10km S26361-F3986-E4 S26361-F3986-L4

*** S26361-F3873-E500

25G AOC - Cisco 2xAOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch

vendors. 25G AOC - Mellanox 2x

S26361-F4054-E701

SFP28 Optical Transceiver 25G SR E25GSFP28SR LC 2x

MMF / SR SFP28 module, Intel. Max reach supported 30m

S26361-F4055-E701

Enablement for System Architect V:DAC/AOC-CONNECTOR-25

25G DAC - Cisco 2xDAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

SFP+ Optical Transceiver 10G Single Rate SR

2x

2x LC, MMF / SR SFP+ module, up to 400m

S26361-F4055-L701

2x

see table at the botton of this page

SFP+ active Twinax Cable Brocade 2x

25G DAC - Intel 2x

2x

25G AOC - Brocade 2x AOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

25G AOC - Cisco 2x

25G AOC - Intel

SFP+ Optical Transceiver 10G Single Rate LR

PCNA SFP+ MMF Modul OCe14102 *** MMF / SR SFP+ module, up to 400m, Emulex S26361-F5250-E110 S26361-F5250-L110

PLAN EP OCe14102 2x10Gb LP * 2 port NIC with RDMA, Emulex S26361-F5536-E202 S26361-F5536-L502

PCNA EP OCe14102 2x 10Gb LP (*1) * 2 port CNA with FCoE & RDMA, Emulex S26361-F5250-E201 S26361-F5250-L501

10Gb Ethernet controller with SFP+ interface (for SFP+ modules or twinax cables, Emulex)

S26361-F3989-E600

*max. 1 for CX2570 M4, max. 2 for node CX2550 / CX2560 M4

25/10Gb Ethernet network components

"Virtual Connector" for DAC/AOC cables 2x Enablement for System Architect

Twinax Anschlussplatz Primergy ***

S26361-F3986-L6

SFP+ Optical Transceiver 10G Single Rate SR 2x LC, MMF / SR SFP+ module, up to 400m S26361-F3986-E3 S26361-F3986-L3

SFP+ Optical Transceiver 10G/1G Dual Rate SR

SFP+ active Twinax Cable - Fujitsu 2x customized cable length(best fitting cable length is defined during rack installation at the factory)

V:DAC/AOC-CONNECTOR-25

25G DAC - Brocade 2x DAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

S26361-F4054-L701

"Virtual Connector" for DAC/AOC cables 2x

25G DAC - Cisco

Dual speed support, auto-sense - supports 25Gbps and 10Gbps line rate per-port

*)PLAN EP QL41212 25Gb 2p SFP28 LP

25G DAC - Mellanox 2x

S26361-F3986-E3

2xMMF / SR SFP28 module, Mellanox. Max reach supported 100m

V:TWX CONNECTOR-10

SFP+ active Twinax Cable - Fujitsu 2x customized cable length(best fitting cable length is defined during rack installation at the factory)

S26361-F3989-E600 see table at the botton of this page

SFP+ active Twinax Cable Brocade

2x Enablement for System Architect V:TWX CONNECTOR-10

2x

LC, SMF / LR SFP+ module, up to 10km S26361-F3986-E4 S26361-F3986-L4

"Virtual Connector" for Twinax cables

2x LC, MMF / SR SFP+ module, up to 400m S26361-F3986-E5 S26361-F3986-L5

SFP+ Optical Transceiver 10G/1G Dual Rate LR2x LC, SMF / LR SFP+ module, up to 10km S26361-F3986-E6



Edition2018/07/11

max. 2x SFP+ or Twinax Cable per controller

*) max. 2 controllers per CX2550 M4; max. 2 controllers per CX2560 M4; max. 1 controller for CX2570 M4.


Optional, 25Gb SFP28 Optical Transceiver module with LC connector for PLAN EP MCX4-LX 25Gb 2p SFP28

Max. 2x SFP28 or DAC/AOC Cable per PLAN EP MCX4-LX 25Gb 2p SFP28

Optional, 10Gb SFP+ Optical Transceiver module with LC connector for PLAN EP MCX4-LX 25Gb 2p SFP28


max. 2x SFP+ or Twinax Cable per controller

*) max. 2x PLAN EP MCX4-LX 25Gb 2p SFP28 for CX2550 M4, max 2x for CX2560 M4, max 1x for CX2570 M4.

40Gb Ethernet controller with QSFP cage (requires DAC, AOC cables or optical transceiver QSFP modules)

Optional, 40Gb QSFP Optical Transceiver module with MPO connector for PLAN EP MCX4-EN 40Gb 2p QSFP

rmax. 2x QSFP or DAC, AOC per PLAN EP MCX4-EN 40Gb 2p QSFP

*) max. 2x PLAN EP MCX4 EN 40Gb 2p QSFP for CX2550 M4, max 2x for CX2560 M4, max 1x for CX2570 M4.

100Gb Ethernet controller with 1x QSFP28 cage (requires twinax cables or optical transceiver QSFP28 modules)

Optional, 100Gb QSFP28 Optical Transceiver module with MPO connector for PLAN EP QL45611 100Gb 1p QSFP28

S26361-F4057-E201 S26361-F4057-L501



*) Single Port NIC, RoCE RDMA, Cavium

2x

PLAN EP MCX4-LX 25Gb 2p SFP28 LP *) Dual Port NIC, RoCE RDMA, Mellanox S26361-F4054-E202

25G DAC - Cisco 2xDAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 25G DAC - Mellanox

Dual speed support, auto-sense - supports 25Gbps and 10Gbps line rate per-port

S26361-F4054-L502

SFP28 Optical Transceiver 25G SR MMA2P00-AS LC 2x


MMF / SR SFP28 module, Mellanox. Max reach supported 100m

S26361-F4054-E701 S26361-F4054-L701

25G AOC - Cisco 2xAOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 25G AOC - Mellanox 2x

SFP+ Optical Transceiver 10G/1G Dual Rate SR2x LC, MMF / SR SFP+ module, up to 400m S26361-F3986-E5 S26361-F3986-L5

SFP+ Optical Transceiver 10G/1G Dual Rate LR2x LC, SMF / LR SFP+ module, up to 10km S26361-F3986-E6 S26361-F3986-L6

"Virtual Connector" for Twinax cables 2x Enablement for System Architect V:TWX CONNECTOR-10

SFP+ active Twinax Cable - Fujitsu

Supports 40Gbps line rate per-port

PLAN EP MCX4-EN 40Gb 2p QSFP LP *) Dual Port NIC, RoCE RDMA, Mellanox

2x customized cable length(best fitting cable length is defined during

rack installation at the factory)

S26361-F3989-E600 see table at the botton of this page

SFP+ active Twinax Cable Brocade 2x

S26361-F4053-E202 S26361-F4053-L502

SFP+ Optical Transceiver 10G Single Rate SR 2x LC, MMF / SR SFP+ module, up to 400m S26361-F3986-E3 S26361-F3986-L3

SFP+ Optical Transceiver 10G Single Rate LR 2x LC, SMF / LR SFP+ module, up to 10km S26361-F3986-E4 S26361-F3986-L4

QSFP 40G SR4L MPO 850nm 30m

MC2210411-SR4L2x MMF / SR4L QSFP module, Mellanox. Max

reach supported 30mS26361-F4053-E701 S26361-F4053-L701

MMF / SR4 QSFP module, Mellanox. Max reach supported 150m

S26361-F4053-E702 S26361-F4053-L702


QSFP 40G SR4 MPO 850nm 150m MC2210411-SR4

2x

2xAOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 40G AOC - Mellanox 2x

QSFP28 100G PSM4 1310nm 500m MMS1C10-CM

1x

QSFP28 100G SR4 MPO 850nm 100m MMA1B00-C100D

1x MMF / SR4 QSFP28 module, Mellanox. Max reach supported 100m

S26361-F4052-E701 S26361-F4052-L701

40G AOC - Cisco

Supports 100Gbps line rate

PLAN EP QL45611 100Gb 1p QSFP28 LP

MMF / SR QSFP28 module, Mellanox. Max reach supported 500m

S26361-F4052-E801 S26361-F4052-L801

40G DAC - Cisco 2xDAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 40G DAC - Mellanox 2x



Edition2018/07/11

Max. 1x QSFP28 or DAC/AOC Cable per PLAN EP QL45611 100Gb 1p QSFP28

*) max. 2x PLAN EP QL45611 100Gb 1p QSFP28 for CX2550 M4, max 2x for CX2560 M4, max 1x for CX2570 M4.

100Gb Ethernet controller with 1x QSFP28 cage (requires twinax cables or optical transceiver QSFP28 modules)

Optional, 100Gb QSFP28 Optical Transceiver module with MPO connector for PLAN EP MCX4-EN 100Gb 1p QSFP28

Max. 1x QSFP28 or DAC/AOC Cable per PLAN EP MCX4-EN 100Gb 1p QSFP28

*) max. 2x PLAN EP MCX4 EN 100Gb 1p QSFP28 for CX2550 M4, max 2x for CX2560 M4, max 1x for CX2570 M4.

I

J

K

Liquid cooling base unit / CX2550 M4 does not support FC controller

Dual speed support - supports 16Gb and 8Gb

16Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM3 or OM4)

S26361-F4043-E202 S26361-F4043-L502

S26361-F4044-L501

PFC EP LPe32002 2x 32Gb LP *****

PFC EP QLE2742 2x 32Gb LP

S26361-F4052-E701 S26361-F4052-L701MMF / SR4 QSFP28 module, Mellanox. Max reach supported 100m

Brocade active SFP+ Twinax 10Gb cable

S26361-F4044-E202

S26361-F4052-L801

Supports 100Gbps line rate

100G AOC - Cisco

2 port, low profile, Cavium/Qlogic

Network cables for later upgrade

Fujitsu active SFP+ Twinax 10Gb cable

SFP+ active Twinax Cable Fujitsu 2m

*)

S26361-F4052-E801

32Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM3 or OM4)

Dual speed support - supports 32Gb and 16Gb

S26361-F3873-L501

SFP+ active Twinax Cable Fujitsu 10m S26361-F3989-L110

PFC EP QLE2740 1x 32Gb LP ***** 1 port, low profile, Cavium/Qlogic

2 port, low profile, Broadcom/Emulex

PFC EP LPe32000 1x 32Gb LP ***** 1 port, low profile, Broadcom/Emulex

K

SFP+ active Twinax Cable Brocade 1m

*****

SFP+ active Twinax Cable Fujitsu 5m

QSFP28 100G PSM4 1310nm 500m MMS1C10-CM

1x

S26361-F3989-L105

"Virtual Connector" for DAC/AOC cables 1x

QSFP28 100G SR4 MPO 850nm 100m MMA1B00-C100D

1x

1xAOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors.

MMF / SR QSFP28 module, Mellanox. Max reach supported 500m

Single Port NIC, RoCE RDMA, Mellanox

Chapter 12 - Fibre Channel Controller

S26361-F4044-E201

SFP+ active Twinax Cable Brocade 5m S26361-F3873-L505

SFP+ active Twinax Cable Brocade 3m S26361-F3873-L503

S26361-F3989-L102

S26361-F4043-L501

S26361-F4044-L502

S26361-F4043-E201

Enablement for System Architect V:DAC/AOC-CONNECTOR-100DAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 100G DAC - Mellanox 1x

100G DAC - Cisco 1x


PLAN EP MCX4-EN 100Gb 1p QSFP28 LP S26361-F4052-E201 S26361-F4052-L501

100G AOC - Mellanox 1x

100G DAC - Cisco

1x

DAC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 100G DAC - Mellanox

100G AOC - Cisco 1xAOC are not in Fujitsu's portfolio yet. Thus, test only and purchase from switch vendors. 100G AOC - Mellanox 1x

1x



Edition2018/07/11

Please select when use OmniPath port inXeon Gold 61xxF/81XXF

S26361-F5562-E10

POP EP 100Gb 1port Omni Path

100GBit 1channel HFI Card

Q-SFP+ connector

PCIe x16

Supported only with Linux

Omni Path

PFC EP QLE2692 2x 16Gb LP

1 port, low profile, Cavium/Qlogic

S26361-F5540-L202

100Gbit/s 1ch Infiniband Controller

56Gbit/s 1ch Infiniband Controller S26361-F4533-L102

56Gbit/s 2ch Infiniband Controller S26361-F4533-L202

S26361-F5580-L502

L

QSFP, IB 56Gb, 3m S26361-F3996-L563

QSFP, IB 100Gb, 1m S26361-F5549-L561

QSFP, IB 100Gb, 3m S26361-F5549-L563

100Gbit/s 1ch Omni Path HFI Card S26361-F5562-L10

QSFP, Omni 100Gb, 1.5m S26361-F5563-L150

QSFP, Omni 100Gb, 2m S26361-F5563-L200

QSFP, Omni 100Gb, 3m S26361-F5563-L300

100Gbit/s 1 port Omni Path PHY Card S26361-F5651-L460

QSFP, IB 56Gb, 1m

100Gbit/s 2ch Infiniband Controller

***** 2 port, low profile, Cavium/Qlogic S26361-F5580-E202

S26361-F3996-L561

max. 1x per CX2570, 2 for the other

S26361-F5540-L102

PFC EP LPe31002 2x 16Gb LP

S26361-F5596-E201 S26361-F5596-L501PFC EP LPe31000 1x 16Gb LP ***** 1 port, low profile, Broadcom/Emulex

S26361-F5540-E102/E202

S26361-F5580-E201 S26361-F5580-L501PFC EP QLE2690 1x 16Gb LP *****

*****

*****max. 1 for CX2570 M4, max. 2 for CX2560 M4 (No FC card support for CX2550 M4)

2 port, low profile, Broadcom/Emulex S26361-F5596-E202 S26361-F5596-L502

max. 1x per CX2570, 2 for the other

max. 1x per CX2570, 2 for the other max. 1x per CX2570, 2 for the other

Chapter 13 - Infiniband Controllers

S26361-F4533-E102 S26361-F4533-E202

IB HCA 56Gb 1channel FDR IB HCA 56Gb 2channel FDR

56GBit 1channel Infiniband Controller with FDR technology

56GBit 2channel Infiniband Controller with FDR technology

1x / 2x Q-SFP+ connector

S26361-F5540-L102/L202

IB HCA 100Gb 1 / 2channel EDR

100GBit 1 / 2channel Infiniband Controller EDR technology (8.0GT/s)

Q-SFP+ connector Q-SFP+ connector

Network Components, Controller and cables for later upgrade

PCIe x8, 170mm PCIe x8, 170mm

PCIe Gen3 x16, 170mm

The following card can not be mixed Infiniband card(S26361-F4533-E102/S26361-F4533-E202/S26361-F5540-E102/E202)

S26361-F4054-E302/S26361-F4052-E201/S26361-F4052-E1/S26361-F4053-E2/S26361-F4053-E202S26361-F4054-E2/S26361-F4054-E202

The following card can not be mixed with Infiniband card(S26361-F5562-E10)

S26361-F4054-E302/S26361-F4052-E201/S26361-F4052-E1/S26361-F4053-E2/S26361-F4053-E202S26361-F4054-E2/S26361-F4054-E202


PRIMERGY CX400 M4 System configurator and

order information guide

Edition

25th of December 2016

http://www.fujitsu.com/fts/products/computing/peripheral/accessories/index-facts.html

Chapter 15 - Accessories

Q

USB Mouse:

Mouse M520 Black S26381-K467-E100 S26381-K467-L100

Mouse M530 Grey n/a S26381-K468-L101

USB sticks (FOR PROJECTS ONLY) - no standard release

ADATA USB 3.0 Flash Stick UE700 – 32GB S26391-F6048-L332

Mouse M520 Grey S26381-K467-E101 S26381-K467-L101

Mouse M530 Black n/a S26381-K468-L100

ADATA USB 3.0 Flash Stick UE700 – 64GB S26391-F6048-L364

USB Keyboards for Tower Servers for following countries:

USB professional Keyboard KBPC PX ECO Country version FUJITSU Keyboard KB521 USB (grey)

US/ int 105 keys (UK keyboard + US int. Layout) S26381-K521-E102

S26381-K341-E104 Czech/Slovak S26381-K521-E104

S26381-K341-E110 US 104 keys (US keyboard + US layout) S26381-K521-E110

S26381-K341-E120 Germany S26381-K521-E120

S26381-K341-E122 Germany / Int S26381-K521-E122

S26381-K341-E140 France S26381-K521-E140

S26381-K341-E154 Sweden / Finland S26381-K521-E154

S26381-K521-E180

S26381-K341-E185 Italy S26381-K521-E185

S26381-K341-E165 United Kingdom S26381-K521-E165

S26381-K341-E170 Switzerland S26381-K521-E170

USB Optical Disc Drive

Fujitsu External Super Multi Drive S26341-F103-L142

R

S26381-K341-E180 Spain

Please find the layout of all Fujitsu keyboards here: http://abg0355a.abg.fsc.net/

http://www.fujitsu.com/fts/products/computing/peripheral/accessories/index-facts.html

http://abg0355a.abg.fsc.net/


Edition2017/05/02

as soon as available as soon as available

S26361-F1790-E311

embedded Lifecycle Management (eLCM) Loose delivery

Server Online Update eLCM Activation Pack

OS driver Update (Node Locked License)

Hardware firmware update BDL:ELCM-PACK

Server Offline Update options contains:

Hardware update via Update Manager Express - 16GB SD card

PrimeCollect - Paper with TAN for Licensekey

Autonomous creation of Primecollect archives

Creation and use of PrimeCollect archives over AIS connect

Custom Image (Jukebox function)

Automatic and manual download of CD and DVD Images

Automatic and manual start of CD and DVD Images

max. 1x per system

S26361-F3776-E240

Cool-safe ® Advanced Thermal design 40°C

enables the PRIMERGY Server to cope with temperatures from 5-40° in operating mode due to extended Fan settings

this setting can be activated ex factory only

max. 1x per system

TPM Module 2.0

max. 1x per system

S26361-F3552-E100

S26361-F3552-L100

S26361-F1790-L244

Chapter 16 - others

max. 1x per system

O

S26361-F1790-E243

iRMC S4 advanced pack / S5 alternatively

integrated remote Management controller activation key for

graphical console redirection and remote media redirection

enables the PRIMERGY Server to cope with temperatures from 5-45° in operating mode due to extended Fan settings

this setting can be activated ex factory only

max. 1x per system

S26361-F3776-E245

Cool-safe ® Advanced Thermal design 45°C

With our made4you service we fulfill anyindividual requirement and wish of ourcustomers perfectly - e.g.> special hardware configurations,> staging services ex factory,> extended lifecycle management,> customer specific logos, component,> BIOS fixes and many more.

For further information please contact usvia [email protected].

You would like to add some customer specific solutions?

Advanced Thermal design cannot be combined with the Flash backup unit of the RAID controllers

cnfgCX400M4_CX25x0M4.xlsx others Page 40 of 44


Edition2017/05/02

Your Server is ready

For further information please contact usvia [email protected].

Fujitsu PortfolioBuild on industry standards, Fujitsu offers a full portfolio of IT hardware and software products, services, solutions and cloud offering, ranging from clients to datacenter solutions and includes the broad stack of Business Solutions, as well as the full stack of Cloud offering. This allows customers to leverage from alternative sourcing and delivery models to increase their business agility and to improve their IT operation’s

cnfgCX400M4_CX25x0M4.xlsx others Page 41 of 44

Legend

GR: General Release

NR: No release

Cooling Air Liquid Air Liquid Air/Liquid Air

Target market Cloud Special release HPC HPC P100/V100 M60/M10/P40

Microsoft Windows

Windows Server 2016

Microsoft Hyper-V Server 2016 GR NR GR NR NR SR

Windows Server 2016 Datacenter GR NR GR NR NR NR

Windows Server 2016 Standard GR NR GR NR NR NR

Windows Server 2016 Essentials GR NR GR NR NR NR

Windows Storage Server 2016 Standard GR NR NR NR NR NR

Windows Server 2012R2

Microsoft Hyper-V Server 2012R2 GR NR SR NR NR NR

Windows Server 2012R2 Datacenter GR NR SR NR NR NR

Windows Server 2012R2 Standard GR NR SR NR NR NR

Windows Server 2012R2 Essentials GR NR SR NR NR NR

Windows Server 2012R2 Foundation GR NR SR NR NR NR

Windows Storage Server 2012R2 Standard GR NR NR NR NR NR

Windows Server 2012

Microsoft Hyper-V Server 2012 NR NR NR NR NR NR

Windows Server 2012 Datacenter NR NR NR NR NR NR

Windows Server 2012 Standard NR NR NR NR NR NR

Windows Server 2012 Essentials NR NR NR NR NR NR

Windows Server 2012 Foundation NR NR NR NR NR NR

Windows Storage Server 2012 Standard NR NR NR NR NR NR

RedHat Linux

Red Hat Enterprise Linux 32-bit 6.9 NR NR NR NR NR NR

Red Hat Enterprise Linux 64-bit 6.9 GR NR GR GR SR NR

Red Hat Enterprise Linux 64-bit 7.3 GR SR GR GR GR NR

Red Hat Enterprise Linux 64-bit 7.4 GR SR GR GR GR NR

Suse Linux

SUSE Linux Enterprise Server 11 32-bit SP4 NR NR NR NR NR NR

SUSE Linux Enterprise Server 11 64-bit SP4 NR NR NR NR NR NR

SUSE Linux Enterprise Server 12 64-bit SP2 GR NR GR GR NR NR

SUSE Linux Enterprise Server 12 64-bit SP3 GR NR GR GR SR NR

Open Enterprise Server 2 32-bit 11SP1 NR NR NR NR NR NR

Open Enterprise Server 2 64-bit 11SP1 NR NR NR NR NR NR

VMware ESX Server

ESXi 5.1 (inc. FT) NR NR NR NR NR NR

ESXi 5.5 NR NR NR NR NR NR

ESXi 6.0 U3 GR NR NR NR NR NR

ESXi 6.5 Patch 1 GR NR NR NR NR NR

ESXi 6.5 U1 GR NR NR NR NR GR

Oracle

Oracle Linux 6 (RHEL & UEK kernel) 64-bit 6.9 GR NR NR NR NR NR

Oracle Linux 7 (RHEL & UEK kernel) 64-bit 7.4 GR NR NR NR NR NR

Oracle Virtual Manager 3 3.4 GR NR NR NR NR NR

Solaris 11 64-bit NR NR NR NR NR NR

Citrix

XenServer 7.1 NR NR NR NR NR NR

XenServer 7.2 GR NR NR NR NR GR

Other

WinPE NR NR NR NR NR NR

CentOS 6.9 & 7.3 tested NR tested tested tested NR

SupplierModel

Name

PRIMERGY CX400 M4

CX2560 M4 CX2550 M4 CX2570 M4


Edition2017/10/10

15.02.2018 OS Support Hiroyuki Ichiduka Update

22.10.2018 GFX Takayuki Sasaki Add and modify NVIDIA GRID license SKU.

Deleted: max 4x for CX2580 M4. Node doesn't exist.11.05.2018 LAN_FC_IB U. Lösch

05.09.2018 GFX Takayuki Sasaki Delete NVIDIA GRID license SKU due to Vender EOL.23.08.2018 LAN_FC_IB U. Lösch Cosmetic change: PLAN EP MCX4-LX

15.01.2018 HD_SSD / F5694-* / F5543/F5582-E124 Tatsuya Sudou added

31.01.2018 Xeon Silver 4114T L. Meszaros set to Special Release

19.04.2018 LAN_FC_IB U. Lösch Added: PLAN EP X710-T4 4x10GBASE-T

02.03.2018 HD_SSD / S26361-F5701/F5697-* Tatsuya Sudou added16.02.2018 All CPU pages Klaus-Dieter Ruf Added updated restriction for air cooling (T50 V1.01)

21.03.2018 LAN_FC_IB U. Lösch SFP28 S26361-F4055-E/L701 added for PLAN EP

18.12.2017 baseHD_cageHD_SSD

Hiroyuki Ichiduka [base tab]Added Basic units for CX2570 M4 ACS26361-K1614-V200

Modified Basic units for CX2570 M4 LC (SXM2) number S26361-K1616-V400 -> S26361-K1616-V500

PLAN EP QL41212 & QL45611 added13.02.2018 LAN_FC_IB U. Lösch

23.01.2018 GFX Takayuki Sasaki Added new GPU cards

20.12.2017 CPU_CX2560 Hiroyuki Ichiduka [CPU_CX2560 tab]

05.01.2018 CPU_CX25x0 Klaus-Dieter Ruf Upgrade cooler kit corrected04.01.2018 LAN_FC_IB U. Lösch Mellanox Ethernet 25, 40, 100 GbE re-entered

25.10.201725.10.2017

25.10.2017

Intel Ethernet 25GbE order number added

S26361-F5651-E460; Supported system name corrected

04.10.2017 LAN_FC_IB U. Lösch

17.10.2017

PLAN EP XXV710-DA2 2x25Gb OCP PLAN EP MCX4-LX 2x25Gb OCP

PLAN EP XXV710-DA2 2x25GbLAN_FC_IB section DynamicLOM U. Lösch

U. Lösch

U. Lösch

LAN_FC_IB section 25GbE

LAN_FC_IB section DynamicLOM

LAN_FC_IB U. Lösch Cavium Ethernet 25GbE order number added

CPU (CX2550/2560/2570) L. Meszaros new extra sheet for every node type

29.09.2017 LAN_FC_IB Atsushi Iwata

26.09.2017 HD_cage Tatsuya Sudou added information on HDD cage and dummy22.09.201722.09.2017 HD_SSD Tatsuya Sudou F5614/F5617-* / F5588-E240/E480 removed15.09.2017 LAN U. Lösch Cosmetic change DynamicLoM: cages and optical

12.09.2017 All tab Hiroyuki Ichiduka deleted the strikethrough part

15.09.2017 Hiroyuki Ichiduka [base tab][LAN_FC_IB tab]

11.09.2017 LAN_FC_IB sheet tab Hiroyuki Ichiduka corrected the explanation of S26361-F5651-E460

05.09.2017 Hiroyuki Ichiduka [CPU tab]

Hiroyuki Ichiduka 1. Added "as soon as available" commentbase

04.10.2017

08.09.2017 CPU tab Hiroyuki Ichiduka corrected CPU function

14.12.2017 CPU_CX25x0 Hiroyuki Ichiduka [CPU_CX25x0 tab]13.12.2017 Description Hiroyuki Ichiduka [Description tab]

26.09.2017 RAM Klaus-Dieter Ruf RAM page updated

29.09.2017 LAN_FC_IB Atsushi Iwata S26361-F5651-L460 added04.10.2017 LAN_FC_IB U. Lösch Mellanox Ethernet strikethrough, wait for December

CPU_CX25x0 Klaus-Dieter Ruf OMNI Path SKU update; additional remarks added10.10.2017

31.01.2019 HD_SSD Shotaro Ichihashi Delete Dual microSD/ AIC PCI SSD05.02.2019 HD_SSD Shotaro Ichihashi Delete SSD

19.10.2017 HD_SSD Tatsuya Sudou S26361-F4045-E64 added

11.07.2018 CPUOmniPath Phy card

Masakazu Matsubara SKYLAKE-F SKU removedOmniPath Phy card removed03.07.2018 GFX Takayuki Sasaki Added new GPU cards

13.11.2017 HD_SSD Tatsuya Sudou note for Dual microSD and DWPD for PCIe-SSD modified

02.08.2018 GFX U. Lösch Change the support status for Tesla M10.23.08.2018 LAN_FC_IB U. Lösch Deleted: PLAN EP QL4521223.08.2018 LAN_FC_IB U. Lösch Cosmetic change: PLAN EP XXV710-DA2

25.03.2019 RAID Shotaro Ichihashi Delete EP520i

08.02.2019 LAN_FC_IB Masanori Takaoka Add the limitation for Mellanox Infiniband/Ether.Add the limitation for Intel OMNI/Mellanox Ether.

Folder / order code / descriptionDate of change [dd.mm.yyyy]

Name What has been changed / comment

2019/3/ HD_SSD Shotaro Ichihashi Add the SSD

cnfgCX400M4_CX25x0M4.xlsx change_history Page 43 of 44


Edition2017/10/10

05.09.2017 CPU tab Hiroyuki Ichiduka Added 100Gb PHY card 1 port Omni Path

Ikkei Kinouchi [LAN Components]GFX Takayuki Sasaki

27.07.2017

31.08.2017 LAN_FC_IB sheet tab

Update GRID SW licenses.31.07.2017

16.08.2017 Description sheet tab Hiroyuki Ichiduka Added Installing condition by power supply composition

09.08.2017 Base unit for CX2560 M4 LC Masakazu Matsubara Order codes of CX2560 M4 Base unit corrected as follows:

Atsushi Iwata corrected order code of IB 100GB card.

28.03.2017 Ikkei Kinouchi Updated

21.05.2017 Ikkei Kinouchi Updated for below02.05.2017 Ikkei Kinouchi Updated

added

02.11.2016 First Draft Ikkei Kinouchi

Ikkei Kinouchi Updated

19.12.2016 Ikkei Kinouchi

05.02.2017 Ikkei Kinouchi Updated05.03.2017

Updated25.12.2016 Ikkei Kinouchi Updated of #qty of option card

LAN21.07.2017 HD_SSD / S26361-F5648-* / PCIe SSD Tatsuya Sudou

08.06.2017 Ikkei Kinouchi Sales order number added for below.Sales order number added for below.Ikkei Kinouchi12.06.2017

15.06.2017 Ikkei Kinouchi Remark for max memory capacity added (>768GB/CPU

codes modified / DWPD corrected

22.06.2017 Ikkei Kinouchi Sales order number added for below.19.07.2017 U. Lösch

LANInserted: Order numbers for X710-DA4 10GbE Ethernet

19.07.2017 U. Lösch Added: 25/40/100GbE Ethernet adapters, Mellanox

24.07.2017 HD_SSD / S26361-F5675-* / F5531-E590 Tatsuya Sudou

20.07.2017 U. Lösch Added: 10GbE Ethernet adapter X710-DA4, 4-Ports, Intel

cnfgCX400M4_CX25x0M4.xlsx change_history Page 44 of 44

Documents

Configurator PRIMERGY CX400 M4 - Fujitsu CX400 M4 System configurator and order information guide Edition 2018/05/10 Rack version for 19'' racks with 2 height units No PSU included