Chrysler Hemi Compatible 426 c.i. Engine and T56 Manual Transmission - 872 HP - Standard Edition Builder Series with Black Pulley Kit - Supercharged

Chrysler Hemi Compatible 426 c.i. Engine and T56 Manual Transmission - 872 HP - Standard Edition Builder Series with Black Pulley Kit - Supercharged

SKU: B426SCTKBT56

Chrysler Hemi Compatible 426 c.i. Engine and T56 Manual Transmission - 872 HP - Standard Edition Builder Series with Black Pulley Kit - Supercharged

SKU: B426SCTKBT56

Horsepower & Torque: 872 HP/ 764 FT. LBS.

Cylinder Heads: Gen III Hemi Apache Aluminum Cylinder Heads

Compression Ratio: 10.48:1

Camshaft: Hydraulic Roller Cam - .610 Intake/ .611 Exhaust Lift and 231 Intake/ 225 Exhaust Duration @ .050 - 113° LSA

Pistons: Forged

Crankshaft: Forged Steel Crank - 4.050" Stroke and Forged 6.125" Connecting Rods

/
  • Secure payments
  • Financing available at checkout with Affirm

Note: this engine comes with a black front pulley kit but polished is pictured

Highlights:

  • Engine manufactured and machined in the USA!
  • Horsepower & torque: 872 HP/ 764 FT. LBS.
  • Cylinder heads: Gen III Hemi Apache aluminum cylinder heads
  • Compression ratio: 10.48:1
  • Camshaft: Hydraulic roller cam - .610 intake/ .611 exhaust lift and 231 intake/ 225 exhaust duration @ .050 - 113° LSA
  • Pistons: Forged
  • Crankshaft: Forged steel crank - 4.050" stroke and forged 6.125" connecting rods

Block:

  • NEW “BGE” Hellcat / Apache engine block
  • 4-bolt main
  • 4.090" bore
  • 1-piece rear main seal

Rotating Assembly:

  • Forged steel crank
  • 4.050" stroke
  • 6.125" connecting rods
  • Forged pistons
  • Internal balance - front
  • Internal balance - rear

Cylinder Heads:

  • Gen III Hemi Apache aluminum cylinder heads
  • 73cc chamber
  • 2.140" intake/ 1.650" exhaust valves

Cam Specs:

  • Hydraulic roller cam
  • .610 intake/ .611 exhaust lift
  • 231 intake/ 255 exhaust duration @ .050 - 113° LSA

Assembled with Complete T56 Six Speed Transmission Package:

  • Includes the following: 
  • McLeod Super Steel Pro dual disk clutch
  • Steel bell housing
  • Billet flywheel
  • Engine guard
  • Starter
    • First Gear Ration: 2.66:1
    • Second Gear Ratio: 1.78:1
    • Third Gear Ratio: 1.30:1
    • Fourth Gear Ratio: 1.00:1
    • Fifth Gear Ratio: 0.80:1
    • Sixth Gear Ratio: 0.63:1

Ignition Timing:

  • Controlled by ECU

Also Includes:

  • Whipple 3.0L supercharger
  • Supercharger fluid reservoir 
  • Hellcat throttle body
  • Flywheel
  • Harmonic balancer
  • Muscle car style - mid sump swap oil pan
  • Spark plugs & coil
  • Timing cover
  • Valve covers
  • Water pump
  • Installed complete black front accessory drive - water pump, alternator, power steering, A/C, all belts and pulleys
  • Holley Terminator ECU controller kit and wiring harness
  • All sensors required for engine to run

Notes:

  • Features 2013+ 58X reluctor wheel
  • 2009+ crankshaft spacing
  • 2009+ car timing cover
  • VVT locked out
  • MDS – eliminated

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Fuel Delivery Type: Whipple 3.0L supercharger

Spark Plug: NGK 5107

Spark Plug Gap: .025"

Harmonic Balancer: Non-Weighted

Flex Plate/ Flywheel: Non-Weighted

Stall Converter: 2500+

Intake Manifold: Supercharger

Fuel Recommendation: 91 - 93 Octane

Timing: Controlled by ECU

Firing Order: 1-8-4-3-6-5-7-2

Recommended Break-in Oil: BPP710

Recommended Service Oil: BPP10W30

Recommended Oil Filter: BPP51515

Total Oil Capacity with Production Oil Pan: 6 QT.

Header Partners: Click here for our Header Partners and recommendations

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BETTER THAN THE REST.

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

For a detailed overview of our warranty, click here.

IT ALL COMES DOWN TO RESULTS.

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGING RIGHTS INCLUDED!

A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

RECOMMENDED PRODUCTS:
TrueBlue Performance Octane Boost
BluePrint Engines TrueBlue Performance Octane Booster